Want to compare same object in different systems

hi all,
i want to compare same object in different systems
example:
same transfer rule in BID to be compared with the one in BIT/BIP
in these kind of cases, pls help me on how to do the comparison.
as i have to do some enhancement in BID and release that changes to BIT/P. but while manually checking i might also miss out any important changes which might create issues.
pls suggest.

Could you please use the below table for comparision.
Cubes      RSDCUBE
DSO's (to identify DSOu2019s based on time stamp field)     RSODSO
Multiproviders     RSDCUBEMULTI
Infosets     RSQISET
Trasnformations      RSTRAN
DTP's     RSBKDTP, RSBKDTPSTAT
Trasnfer strcuture     RSTS
Infopackages     RSLDPIO
Update Rules     RSUPDINFO
Aggregates     RSDAGGDIR/RSDAGGDIR
Process Chians     RSPCCHAIN
OHD's
data sources status      ROOSOURCE,RSDS
Regards,
Saveen Kumar

Similar Messages

SSDT Schema Compare keeps showing the same objects as different..

Hi,
When comparing a database to my project using Visual Studio 2012 SSDT I get several stored procedures marked as changed. The body of the procedures is identical, but two properties are highlighted as different when expanding the object:
IsSelf (false on the DB vs true on the project) and User (dbo on the DB, needs to be added to the project).
The procedures have the option "with execute as self" both in the database and in the project as part of the body.
I have not found what needs to be done so these differences are applied to the project and never appear again. Tried changing some options on the schema compare but didn't found one that help.
Some forum suggested dropping the objects and re-creating them but I don't want to loose the history of changes on TFS.
Any suggestions?

Hi Daniel,
Since you have posted this issue to the SSDT forum here:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5c9c5c47-64ac-4af4-9104-c9500dc8cf52/ssdt-schema-compare-keeps-showing-the-same-objects-as-different?forum=ssdt#5c9c5c47-64ac-4af4-9104-c9500dc8cf52
I will move this thread to the Off-topic forum, thanks for your understanding.
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Compare DB objects between different schemas

Hi,
I want to compare db objects beween 2 different schemas like QA and PROD.
Please suggest me a tool that compares table definitions,stored procedures and other db objects between different schemas.

Did you check the above video link which is shared?
Yes I'd agree with you and also i faced these situations to check what objects i need to export from Dev to Quality ( to analyze what are already correct or what have to be imported again)
Generally Quality & Prod are in sync.
Also will be waiting along with you if anyone comments on any such tool.
Regards,
Krishna Tangudu

Unable to compare the same program in different systems

Hi,
We have a Development & QA system (apart from Production). Now for a program that is in both, Dev & QA, I wanted to compare them using SE37. I clicked on "Compare Different Systems" button. Now I selected the program from Dev for Left-Justified & from QA for Right. When I hit the "Display" button, it gave me the following error message:
Error remote access: Error during the retrieval of the logon data store.
Can anyone help me with this?
Thank you.

Hi Jack,
I went to SM59 & double clicked on my RFC (that I thought would work). It took me to the RFC destination config. screen & it showed me the following message:
User password invalid for identifier /RFC/---- (see long text)
( the dotted lines denote the RFC name )
It's not shown with a red cross mark. It's shown with a Green tick mark. So how do I correct this now & be able to compare the proram? Please let me know.
Thank you.

Accesing same object from different servlets

Hello all!
I am developing a web control project. I am using a simulator of a factory (with java). The engineers are supposed to be able to change some variables from the web.
I am using servlets to change this variables. My problem is that, to be able to change variables, I need to create an instance of this FactorySimulator object.
If each servlet ( there are many servlets) calls an instance, they will be updating different FactorySimulator objects.
How can I make reference, or have acces to the SAME object, from any servlet?
Thanks! I hope my question is clear =)

package com.yourcompany.somepackage;
public class TheFactory
    private static FactorySimulator factory = new FactorySimulator();
    private TheFactory() {} // Static methods only, do not instantiate TheFactory
    public FactorySimulator instance()
        return factory;
}From each of your servlets you can call TheFactory.instance().doWhataver(). Methods in FactorySimulator need to be suitably synchronized of course.

Adjust front panel to screen size and re-position objects on different systems automatically

Hello, i have designed a vi that contains 5 led's placed at the 4 corners and center of the front panel which occupies the entire screen. However, this vi is to be used on different systems having different screen sizes. But on every screen, i'll need the front panel size = screen size and the led's to be placed to the centers and corner of this new screen size automatically without any manual operations and positioning bieng done every time. Will the resize option perform this task completely or do i have to go for some other techniques?
Solved!
Go to Solution.

As far as I know, what you want is not easy to do but it is doable but you have to programmatically do it (no Labview setting). Here is an example for only 2 LEDs but I suppose that you will be able to make it work for your other LEDs.
This VI maximizes the front panel and then positions the 2 LEDs in the center and top right corner upon running. The LEDs are positioned according to their own top left corners, not according to their centers.
Marc Dubois
HaroTek LLC
www.harotek.com
Attachments:
Position LEDs.vi ‏14 KB

Provide a way to distinguish same object from different schema

Hi there,
When the same object is present in different schema and loaded into sql developer, there no chance to distinguish at first sight to which connection (or schema) the object belong.
Example :
DbConnection1 -> tables -> my_table
DbConnection2 -> tables -> my_table
when both are "loaded" (visible as a tab on the right side of sql developer)...i have no chance to find visually which "my_table" tab belong to "DbConnection1" or to "DbConnection2"...
Regards,
Pierre-Yves

Thanks.
A good idea would be to provide an option in "Preferences" to activate (or not) the display of the connection info directly in the tab name (my_table@dbConnection1).
Regards,
Pierre-Yves

*How to Delet one same object from different roles*

I need to delete one auth object from different roles, Couls any one please advise me how can i do this and if there will be any complications involved with tis.
Best regards:
Maq

In PFCG, it may be that you have added some objects manually. To remove them you will have to go to pfcg.
Even if you first remove the objects from su24, you will have to go to all the roles through pfcg to generate them in expert mode by selecting the third option (edit old status and merge with new data)

How to changes Object in different system

Hi All,
All BW objects are owned by BWQ i want to make all the object are owned to BWD(Bcoz this is copied system). Is there any transaction i have to use.. please help me guyz.
Thanks
DST

Go to SE03, specify the object and change its directory entry (original system) to BWD and then it should be ok.

Multiple dialog instances on same host for different System

Dear Sir,
I install two dialog instances on same host ,one for DEV one for QAS.
First I install dialog instance for DEV and startup with no error.
Second dialog instance for QAS install with success end ,but can not start dispatchers.
Service
sapmsDEV     3600/tcp     # SAP System Message Port
sapmsQAS     3601/tcp     # SAP System Message Port
sapdp01s 4701/tcp # SAP System Dispatcher Security Port
sapgw01s 4801/tcp    # SAP System Gateway Security Port
sapdp00       3200/tcp     # SAP System Dispatcher Port
sapdp00s 4700/tcp # SAP System Dispatcher Security Port
sapgw00       3300/tcp # SAP System Gateway Central Instance Port
sapgw00s 4800/tcp # SAP System Gateway Security Port
Disp_dev
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8716]
ERROR => MsIAttachEx: NiBufConnect to sap-qas/sapmsQAS failed (rc=NIECONN_REFUSED) [msxxi.c      633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1549]
Stderr
D:\usr\sap\QAS\D01\work>ntscmgr start MSSQLSERVER -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
D:\usr\sap\QAS\D01\work>ntscmgr start SQLSERVERAGENT -m sap-qas
failure: StartService, NT ErrorMessage: An instance of the service is already running. StartService SUCCESS
It seem that first startup dialog instance already start MSSQLSERVER -m sap-dev and SQLSERVERAGENT -m sap-dev, so next instance can not start again ,and cause NICONN_REFUSED.
Could someone help me?
Thanks
Regards,
Matt

It appears to be possible, at least in IDM 7.1
The release notes and Installation guide reference a setting called waveset.serverId that you set in your application server startup script like so:
-Dwaveset.serverId=Name
This would allow each JVM to identify itself differently from any others running on the same physical server.
I haven't tried this yet myself, so caveat emptor.
Jason

Different EBS Adapter interfaces generate same object types differently

Hi,
We are experiencing the following behavior when using two different interfaces that are both generated from the E-Business Suite Adapter.
Wrapper packages and object types are generated and created in the database. But in both cases the generator creates a type called gme_api_pub_rowtype_sql1.
Alas, that same type has a different specification depending on the interface. Hence, one of the api's has compile errors as it expects the type to have additional parameters.
Has anyone experienced the same behavior?
More important: is there a way to overcome the problem?
Thanks, Sjoerd

To add to that:
We are not willing to have separate schemas for each of the EBS Adapter interfaces so that we can have multiple instances / occurrences of type gme_api_pub_rowtype_sql1, i.e. one per schema.
This would quickly turn into a maintenance nightmare.
Thanks, Sjoerd

PFCG, two roles with the same object but different values

Hi, Can you help me?
I need to know if it's possible have two roles like this:
role A - Object werks = L001 and LIKP-LFART = LF
role B - Object werks = L005 and LIKP-LFART = ZLF
If the some user have role A and role B it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART LF?
Thanks
Dora

I guess you made fat figure on the words: "it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART ZLF", right?
If so, it is impossible.
When SAP doing the authorization check, it call the function "authority_check", input the Object, the filed and the value to check.
if some one have role A and B, SAP will check authority both in Role A and Role B.
What you need to do should be separating the Object into a subrole and assign it separately.
>
Jorge Sousa wrote:
> Hi, Can you help me?
> I need to know if it's possible have two roles like this:
> role A - Object werks = L001 and LIKP-LFART = LF
> role B - Object werks = L005 and LIKP-LFART = ZLF
> If the some user have role A and role B it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART LF?
>
> Thanks
>
> Dora

How to work with the same Object in different computers?

I'm working with Players, and I have to pass them to the server from the client..how can I meke that?
Thanks

Just to clarify, the OP is talking about "javax.media.Player".
(He previously discussed the question on a different forum).

Different approvers for 2 roles of the same name in 2 different systems

Hi experts,
in our SAP landscape we have roles of the same name in different systems. I couldn't find any possibility to select different approvers for these two roles in GRC 5.3 SP08.
For example role XYZ exists in system P1 and P2. In P1 I want to select only person A as role approver, in system P2 only person B.
Is there any chance to select an approver for a combination role and system?
Thanks,
Manuel

Hi Manuel,
Yes. You can create a custom approver determinator. Go to CUP>>Configuration>>Workflow>>Custom approver determinators. Chose create new.
CAD type: Attribute
Workflow type: Access Enforcer
Select your attributes and save.
Go back. Select your new approver determinator in change mode.
Click on the Approve button.
Create logic between the attributes and approvers.
Modify your role approval stage. Select your new custom approver determinator.
Regards,
Vit

Compare 2 objects - urgent

hi all
i have a problem.
I want to compare two objects but dono how.
Object obj1=null, obj2=null;
Vector vec = new Vector()
obj1=vec
Vector vec1=new Vector()
obj2=vec
now i want to compare if(obj1 == obj2)
how can i do this
help out plzzzzzzzzzzzzzzzzz
thanx

Nope, I'm still scratching my head over this one.
However, there are two comparisions in java.
==, and .equals() method
== just checks to see if the Object is the same Object
.equals() is defined to check if one Object is equal to another.
quick example:
String s1 = new String("Hello");
String s2 = s1;
String s3 = new String("Hello");
String s4 = new String("GoodBye");
s1 == s2; // true because they are the same object
s1.equals(s2) // true because they have the same underlying value
s1 == s3 // false because they are different objects
s1.equals(s3) // true, because the are the same underlying value
s1 == s3 // false
s1.equals(s4)// also falseAny time you want to compare the VALUE of two objects, use the .equals method.
So in this case,
if (oldObj.equals(newObj)) is the way to go
If you are dealing with vectors/lists, the equals method will compare every item in oldObj with every item in newObj. If they are all equal, then it will return true.
Hope this helps,
evnafets

Want to compare same object in different systems

Similar Messages

Maybe you are looking for