Want to connect two daqpad-mio-16xe-50 parellel for floting signals/differential signals

i want to record data for 5 minutes.the data is in volts ,for this i want to use two daqpads one for main recording and other for backup.how can i setup 2 daqpads in parellel.is it possible to make differentials connections on both pads or single ended on both or combination of diff: and sng_ended.
please reply me soon.

Malik,
We are curious to know why you may want to have two different Daqpads, if you are going to use two different computers and want to have two daqpads sharing the same signal connections then the answer is that there is no accesory available that will split a signal connection in two or even have two daqpads sharing information, your only solution here is to make a physical jumper wire connection from one terminal block to the other. If you want to share the same computer you can use only one daqpad and stream to disk to two different places, or if you still want to use two daqpads in the same computer you are going to need two parallel ports and two different programs, which may slow down your application.
If your case resides in the first one I mention which
is what I believe then just make a physical jumper wire connection from one terminal block to the other.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

Similar Messages

  • I want to connect two database in Oracle

    Dear All
    I want to connect two database in Oracle ver-10.2.0.1.0 ,And fetch data from 2nd table.
    OS - XP Pro.
    Regards,
    Parwez

    Configure remote DB in TNS first.
    Create DB link.
    CREATE {PUBLIC} DATABASE LINK "DBLINKNAME"  CONNECT TO "remoteuser" IDENTIFIED BY "remotepwd" USING 'REMOTEDBTNSALIAS';Query remote tables using
    select * from remotetable@DBLINKNAME;

  • Installing two PCI-MIO-16XE-10 DAQs

    I have two PCI-MIO-16XE-10 boards, which work fine independently. I now have put them into the SAME computer, and the Windows XP has successfully found them and installed drivers for them. But when troubleshooting using the NI Measurement&Automation program, neither card is working anymore. The self-test fails, and the error message does not explain why. How can I use both DAQs together in the same computer?
    thanks,
    SAK

    Hi SAK-
    There should be no problem with using both cards in your system.  A few things to check are:
    Make sure that NI-DAQmx and Traditional NI-DAQ are not trying to access the board at the same time.  If you use the board with Traditional NI-DAQ you will need to reset the Traditional NI-DAQ driver before using the board with NI-DAQmx again.
    Make sure that you have administrative rights on the PC you're using or the driver may not function properly.
    Make sure that no other applications are currently accessing the boards- the driver will lock out access when the board is currently in use by another application.
    You can further troubleshoot the issue by removing all other PCI cards from the system to try and identify the problem as a resource conflict between your DAQ boards and any other peripherals installed on the system.
    Hopefully this helps-
    Tom W
    National Instruments

  • I want to connect two itunes accounts.

    Hi i want to connect two itunes accounts. my old one with all my music is on my pc with one email address and i have a newish mac which has a different email account number. how do i move the old accounts music to the new one. thanks kellie

    At this time you can not. Apple IDs can not be merged, and content purchased with one Apple ID can not be transfered to another. I suggest you keep using the original account. There is no need for you to create a new Apple ID for the iTunes Store just because your brought a new computer.

  • I want to connect two pair for earphones to my IPAD at the same time is there a recommended splitter or amplifier I should use?

    I want to connect two pair for earphones to my IPAD at the
    same time is there a recommended splitter or amplifier I should use? 

    tracer took the words out of my mouth.  Doing the search I found this one amongst many others.
    http://store.apple.com/us/product/HA828ZM/A/belkin-audio-splitter-35mm-m2x35mm-f

  • I want to connect two microphones trough an AudioLink III hardware in Adobe Connect

    Hi everybody,
    I´m trying to connect an AudioLink III hardware in a Mac OS to use two microphones in the same meeting in Adobe Connect. But, I don´t know why, just it´s working one channel, not both. In another hand, using another sound hardware it works, but it didm´t work with the AudioLink III sound hardware.  Any idea?
    I have to say that in system preferences in the Mountain Lion Mac OS, the two channels from the AudioLink III is working property. The problem comes in my Adobe Connect meeting.
    I hope anybody can help us.
    Sorry for my grammar. Greetings from Spain.
    Javier Díaz-Toledo Gómez
    Instituto del Cine Madrid

    Hi Sameer,
    Yeah, I select the correct Audio input device, in this case, USB Audio. The program recognize the hardware, but just one of the two channels, that´s the problem. I tried under Windows SO too, but with the same results. I suppose that´s a problem with this hardware.
    Thanks for your answer and your time.
    Javier Díaz-Toledo Gómez
    Instituto del Cine Madrid

  • What is the best way to connect two monitors to MacBook Air?

    I have a MacBook Air and I want to connect two monitors to it (not Thunderbolt Displays). I was thinking about using a Mini DisplayPort to DVI adapter to connect one monitor and a USB to DVI adapter to connect the other (such as Diamond BVU). But I have heard that this causes it to become slightly slow to respond on Mission Control and causes videos to lag. Is there anyway to connect two monitors without the lag? Or should I just use one monitor?

    The MacBook Air only allows daisy chaining monitors via Thunderbolt with Apple's Thunderbolt displays so you'll need to go 3rd party with something like -
    http://www.spectrumaudio.com/matrox-dualhead2go-digital-mac-edition.html?gclid=C JzWuvHM0LMCFSXZQgodHWYApg

  • Directly Connect Two Macs Via Ethernet

    This has certainly been answered before, but a quick search didn't give any results. So here goes ...
    I wanted to connect two macs via ethernet. I use the mount tool in finder "connect to server" all the time with machines on a network, but I've never done with with two macs directly connected.
    So I connect them and my first instinct is to check the IP address of the machine I want to connect to. I then go to "connect to server" and type it in using the AFP protocol, but it doesn't work.
    At this point I'm stumped and not sure what to do. I don't use the "network" item in the finder sidebar very often but I clicked it, and sure enough the machine I want to connect to was listed, and I was able to connect / mount.
    So here's my question ... if I wanted to use "connect to server" tool, or even mount it manually with the mount command, how would I do it? Is it using AFP still to mount and the IP address is just bogus? Something else going on?

    But I'm telling you I tried using the IP address ... here, let me try again ...
    I find this address on the machine I want to connect to: 169.254.177.122
    I put this into "connect to server" on the machine I want to connect from: afp://169.254.177.122
    It spins for a while, then says it can't connect. Strangely, if I do a cmd-i on the machine in the network sidebar, it says: nfs:// automount ... into /Network
    So are you sure putting in the ip should work? If so what am I doing wrong?
    Okay ... plot thickens. When I cmd-i after I connect, it indeed says it is an AFP connect, but it gives the "local" name, say powerbook.local. But then, if I "ping powerbook.local" if gives me back the same IP I tried in connect to server. Huh?
    mbp:~ rjcarr$ ping powerbook.local
    PING powerbook.local (169.254.177.122): 56 data bytes
    Weird. It isn't that big of a deal ... I just like to know what is going on.

  • Connect two monitors to macbook air NEW model

    Hi Apple experts
    I know that this is not the first time people asking this question, but as I can see it is 1,5 year ago last time people asked.
    I have the new 1,6 ghz Macbook Air and I want to connect two external screens which both only have VGA and DVI-connections.
    Is it possible to connect the two screens and if yes, which adapters/ eternal equipment is needed?
    I work in programs like Word, Excel and Chrome on the mainscreen and the other screen is only for a mail program. So as you can see it is not cpu-heavy programs that need to run.
    Thanks in advance
    Daniel

    well ... although the jacks right and getting the occasional question and found that was not what I was looking for:) but I took it that if I was looking for anyway:)
    this
    http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011403 &p_id=8079&seq=1&format=2
    but not the way I wanted but it works, what is important ... one would have to try it to see such, but I really thank you!
    bueno... aunque revisando los conectores bien y haciendo una que otra pregunta e visto que no era lo que estaba buscando pero me llevo a lo que si estaba buscando de todas formas
    esto
    http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011403 &p_id=8079&seq=1&format=2
    aunque no de la forma como lo queria pero funciona, que es lo importante... solo tendria que probarlo a ver que tal, pero de verdad gracias!

  • Connecting two AR5000 receivers on same sound card and stream over net

    Hi guys,
    I am able to connect one AR 5000 receiver to a sound card , remote control it over the network, stream audio and play from it.
    Now I want to connect two receivers on a single sound card and do the rest as mentioned above
    Help!!

    Thanks Linc Davis. I thought I'd have to pay for the consultation at the Genius Bar, but you're quite right, it is free and you can decide not to go ahead if the quote they give is too much. Just thought I'd write what happened in case anyone else has the same problem. The cause was basically a small cable that needed to be repaired, which cost about 76 euros. I took it to an Apple Store in Paris and they fixed it within 24 hours, even though they estimated 3-5 days. He said another reason this problem might be occurring is because the Logic Board needs to be replaced which would have cost around 360 euros (probably not worth the money for a 3.5 year old laptop), but thankfully it was just the cable.

  • I have a mac pro 5.1, nvidia ge force 240 connect two 29" LG LG 29EA73-P monitors

    I have a mac pro 5.1 with nvidia ge force 240. I want to connect two LG LG 29EA73-P monitors at full / optimal resolution. Is that possible with the current card, or what card would i need to get? I am doing audio post production on the machine. Any help from the more tech savy people here would be really appreciated. Thanks!

    570's are powerful and can be fine, but it depends on the card to some extent, whether it now has Apple firmware flashed to it (something that MacVidCards on ebay does, which also improves bandwidth from 2.5GT to 5.0). What ports work or not... I have an older bookmark on 570's - they were popular for CUDA and Photoshop, in part due to having more VRAM than Apple's cards at the time.
    This should be a start, and MacRumors is good, just search on "GTX 570"\
    http://forums.macrumors.com/showthread.php?p=15266913#post15266913

  • Is possible to connect two i-phone4 with bluetooth?

    Is possible to connect two i-phone4 with bluetooth?

    For what reason.  Some apps were made to interact with another iPhone with the same app running over bluetooth.
    All info is in the manual if you mean for other reasons.
    http://manuals.apple.com

  • How do  connect two iPods at once.

    Hello, I have two iPods that I connect to one computer (1 a 5th gen ipod, and 1 a 4th gen ipod).
    I can only ever connect one of the two iPod's. When ever I try and connect a 2nd iPod, iTunes disconnects the 1st iPod, and only shows the 2nd iPod, and this then gives a windows error on the 1st iPod.
    Has anyone ever been able to connect two iPods at once in itunes for Windows?

    i have the same problem. With one ipod and another ipod nano, the itunes doesnt works, and need to restart it.

  • HT1549 Hello we want to connect Apple (Mini Mac) to our Workgroup under Windows OS, can share files between computers

    Our Company will start to develop Apple APP , our systems is Windows ,  we want to connect 3 or more  Mini MACs or IMacs I7 to our Workgroup.
    Also we want to install in MiniMac Windows 7 as Virtual in order to start tetsting our APP.
    I would liek to have answer
    Regards
    ALbert Tello

    You can join the Macs to Active Directory . On the System Preference/Users & Groups pane, select Login Options and use the Join Network Account button.
    If you just want to connect the Macs to other Windows machines for file sharing/printing this may help
    http://support.apple.com/kb/PH3895

  • Connecting Netweaver gateway with SUP 2.1 for oData channel

    Hi,
    we are using Generic Channel to deploy the oData service, what we would like to do is, we want to connect NWGW with SUP 2.1 so for that I have created an RFC connection in sm59 in NWGW under HTTP Connections to External Server and I have named it as NW_TO_SUP.
    Now I would like to know what exactly an ABAPer has to do from his end, so that it will trigger the RFC which will pass the data through SUP
    ABAPer is using generic channel and not oData channel.
    Regards,
    Srinivas Divakarla

    Dear Srinivas,
    Generic Channel : it will be done by any developer not only ABAPer,have exiting or standard BAPI/RFC's are available in the SAP Back-end System.
    oData Channel : In this channel developer have a Knowledge on OO-ABAP.
    Thanks,
    Syam.

Maybe you are looking for

  • How to delete music from Ipod Touch?

    there r some songs that r only in my iTouch that iTunes does not detect. I even tried to delete it manually but in vain. As I cannot delete them in my iTouch is there any way I can remove them.

  • Jobname

    Hi, I have jobs running under a particular user. I want to change these jobs to run under my id. what is the step? like, we need to do something like repeat scheduling etc, what is the exact sequence? By the way , I see a job "BI_WRITE_PROT_TO_APP_LO

  • I want to transfer my iPhoto pics to my new computer, but how?

    I have an old dome based iMac running tiger. I want to transfer data to my newer duo core iMac. I bought a USB 32 gb storage device by lexor to load data from my old and put it on my new. When I plug the device into the USB port I see nothing to indi

  • Making a book in iBook Author is very easy, but...

    When Apple launched iBooks Author I was very happy with the simple way in which you can make your own book. In my book there are about 500 photos, 44 movies and it contents 150 pages. Now, several months later, I am very disappointed because it is im

  • How to get drop down list (list of values) in selection-screen

    Hi al,    This is anilreddy. Please let me knew the solution How to get the drop down list for a fieldin selection-screen (not in dialog programming) (not as POV) Regards, anilreddy