Want to create a InDesign document that is Interactive as a PDF
I want to create an InDesign form that is made into a PDF that can be filled out (populated with their answers) and returned via email to someone.
Can I make the document in InDesign or do I have to do it in Acrobat? I am running CS2.
If you can point me into the right direction I would greatly appreciate it.
Thanks
Barb
Just started doing interactive PDFs so I'm learning as I go. Been using Sandee's VQS and Scott Citron's Professional Design Techniques to learn the mechanics. Scott's book is my current favorite. Sure hope he gets well soon.
I rushed through most of the books to get the first issue out but I have a week or so to smooth out my template. Main concern is navigation. I don't want page numbers on the pages but I do want people to click on nav guide and be taken to a specific page. Here's an example of what I mean (note how the page you're on is indicated in red):
layout template
I can't upload the entire PDF since it's proprietary material. Not even sure there is still an Adobe magazine. Is that now called Layers?
Reading up on bookmarks, buttons and hyperlinks this morning. If I complete my template today, I'll put it up later.
Similar Messages
-
I want to place an image in my InDesign document that can work with an address like this (\Resources\Thumb) rather than this (C:\Users\JSmith\Desktop\InDesign thumbnail Test\001\Resources\Thumb) is this possible? In a nutshell I want to point the link to an image in a directory that uses just part of the address.
I know this is something you can do in Maya with linked files. I guess InDesign just isn't there yet.
MW Design - Yeah I think "Relative paths" is the right term! I want to create a Layout with an image in the center of the page - and then duplicate my folder structure with that file. With that, I want to replace the Linked image file with a diferent image file of the same name. In effect having multiple files of the same layout with different images. I hope that made sense. -
What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.
Thanks a lot for your quick reply! However, it works again, after a restart!
Best regards,
Hans
Hans Storhaug
Director
Norwegian Emigration Center
4005 Stavanger
Norway
m +47 908 31 097
9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
created by Mylenium in Adobe Creative Cloud - View the full discussion
Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
Mylenium
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
How do I create a new document that is 8" X 8" and with Print as the document profile?
Page 47 in Chris Botello's Adobe Illustrator CS6 of Cengage's Illustrated Series asks this for the Independent Challenge for Unit B. "Create a new document that is 8" X 8" and with Print as the document profile." As long as its CMYK it's "Print". Right? If I go and change the size the profile goes custom. I'm a Graphic Design Student at a local university. If there are others who have used this book, Please giver me a holler. I wonder what they want there? You think they want to change the "Print" profile? That hasn't been covered. I'm on CC not CS6 but haven't found differences in that area. Probably just not written very clearly.
Thanks,
GaryThanks Monika,
I hate it when I fixate on what should be easy. It's probably just a poorly worded task. I don't think it will blow my GPA.
Gary -
"The selected package file requires an InDesign document that cannot be found."
Hello,
I often get this error message "The selected packaged file requires an InDesign document that cannot be found. How do you want to continue?" when opening in InDesign CS5.5
My options are "Browse to locate this document." and "Save the contents of the package to disk."
When I selected "Browse to locate this document." and I located the appropriate InDesign file, it prompts me to browse for the file again. Its a never ended cycle.
I'm not sure how to solve this problem. I'm not familiar with the procedure if I "save the contents of the package to disk." Can someone help me out with this?
Thanks!Well, there’s your answer. Pretty simple…don’t do that.
But if the damage has been done, you can change the extension of the idap file to zip and unzip the contents. You’ll find all the updated InCopy stories there.
Overwrite the ones on your harddrive and you should be good to go.
Bob -
with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc
Hey Paul,
Please let me know what version of Acrobat Standard are you using.
Regards,
Anubha -
I don't have InDesign but have an InDesign document that I need to convert to IDML
I don't have InDesign but have an InDesign document that I need to convert to IDML
InDesign is the only tool that can do this. The version of InDesign you install must be at least as high as the version used to make the INDD file.
-
InDesign document as an interactive PDF for mobile devices?
How can I export an InDesign document as an interactive PDF for mobile devices?
Avoid SWF at all cost and export using Adobe PDF (interactive).
The experience will depend on the PDF reader that the user has installed. -
Every time I try to save my Indesign document as an Interactive PDF, the option of either saving it as Interactive PDF or PDF is not showing.
You export to PDF, not save.
-
I want to create a simple docuement with 2 pages?
I want to my plugin to create a simple document as soon as My Plugin is loaded in Indesign. I have derived my class IStartupShutdownService so that it's called in startup.
But this is failing at line 23 below.
What else do I need to include in my .fr file?
class LTestStartupShutdownServiceImpl : public CPMUnknown<IStartupShutdownService>
public:
LTestStartupShutdownServiceImpl(IPMUnknown* boss);
virtual ~LTestStartupShutdownServiceImpl();
virtual void Startup();
virtual void Shutdown();
CREATE_PMINTERFACE(LTestStartupShutdownServiceImpl, kLTestStartupShutdownServiceImpl)
LTestStartupShutdownServiceImpl::LTestStartupShutdownServiceImpl(IPMUnknown *boss):CPMUnknown<IStartupShutdownService>(boss)
do
const PMReal width=612, height=792;
const int32 numPages=5, numPagesPerSpread=1;
// Create the command.
InterfacePtr<ICommand> newDocCmd(Utils<IDocumentCommands>()->CreateNewCommand()); //<-----this is coming null and failing
ASSERT(newDocCmd);
if (newDocCmd == nil)
break;
// Set the command's parameterised data.
InterfacePtr<INewDocCmdData> newDocCmdData(newDocCmd, UseDefaultIID());
ASSERT(newDocCmdData);
if (newDocCmdData == nil)
break;
newDocCmdData->SetCreateBasicDocument(kFalse); // Override the following defaults.
PMPageSize pageSize( width, height);
newDocCmdData->SetNewDocumentPageSize(pageSize);
bool16 bWide = kTrue; // landscape orientation.
newDocCmdData->SetWideOrientation(bWide);
// Size margin proportional to document width and height.
PMReal horMargin = width / 20;
PMReal verMargin = height / 20;
newDocCmdData->SetMargins(horMargin, verMargin, horMargin, verMargin);
newDocCmdData->SetNumPages(numPages);
newDocCmdData->SetPagesPerSpread(numPagesPerSpread);
// Create the new document.
CmdUtils::ProcessCommand(newDocCmd);
while (false);
LTestStartupShutdownServiceImpl::~LTestStartupShutdownServiceImpl()
void LTestStartupShutdownServiceImpl::Startup()
void LTestStartupShutdownServiceImpl::Shutdown()
Below is the .fr file:
* Boss class definitions.
resource ClassDescriptionTable(kSDKDefClassDescriptionTableResourceID)
Class
kLTestStartupShutdownServiceBoss,
kInvalidClass,
// Implementation of IStartupShutdownService
IID_ISTARTUPSHUTDOWN, kLTestStartupShutdownServiceImpl,
// Implementation to IK2ServiceProvider to identify the service type as startup-shutdown
IID_IK2SERVICEPROVIDER, kLTestStartupShutdownServiceImpl,Hi maddy,
I want to save the document to MyDocuments folder, I tried to look in IDocFileHandler but I can not get a function which takes path/name as input with docRef.
Can u suggest how can my document to disk?
I dont want user to enter any detail, the document just created should get saved on Disk with the use of some commands only. -
I want to create an ePub2 document should have a proper view in IPAD
I created a ePub document as per the standard epub2 format but it is not to good to view in IPAD. IF i view it in ADE or kindle it is good to look but in IPAD the inline images are even placed in their position. So please anybody help me to built an epub2 document which can be viewed good in both IPAD and ADE. I wanta help that whether any script or code to be added in the EPUB document to make it viewed properly in the book format.
Hi Gopal,
Do check your META-INF folder. It should contain "com.apple.ibooks.display-options.xml" which will make the view same as you do it on ADE.
I know my answer was too late. Please let me know if you had already solved the issue and what was the solution you figured out. -
Creating an InDesign document from a PDF template
I am creating an InDesign doc from a PDF template. How exactly do I go about getting the pdf template into InDesign? I don't know if I chose
the correct option, but I created my doc in InDesign and then placed the pdf template into the doc? Is this correct? If not, any advice would be very helpful!
Thanks.Actually, I'm not quite sure, from your description, what you're trying to do. If someone gave me an English PDF and told me to recreate it it into an InDesign document, I'd start by doing exactly what you did - I'd place it in InDesign. So, now the PDF is in InDesign, as an image that you can't edit. This is really helpful if you have to recreate a PDF perfectly in InDesign - you can know exactly where everything is, and place each new bit exactly where it is in the PDF.
If someone is expecting you to add stuff to that PDF template, you can place it on top of the PDF in InDesign.
If someone is expecting you to manipulate, change, revise, or otherwise actually touch the objects in the PDF template, they don't know what they're doing - PDF is a storage format, and it's not really easy (or even reliably possible) to edit things in PDFs.
Does that make any sense? Please ask some more questions if this isn't clear. -
I have worked with InDesign quite a lot, and now I'd like to make an eBook using the software. I don't know much about Adobe Flash, just starting to learn, and I'd like to know if there is a file format exported from Flash that can be used in an epub format document made with InDesign?
(I'm not sure if I gave the right definition of things but I hope you'll undersand.)
Thanks in advance,
BibiHi Bibi,
the quick answer is no. You can place swf in InDesign and that will be honored during a interactive PDF-Output, but not with EPUB. If you try to get some animations to EPUB, you must use HTML5, CSS3 and Javascript. This can be done in InDesign CC with the help of Adobe Edge Animate.
But note: There is only a minor support for this feature for different devices. -
I want to create checklist for rpd that tells about best practices
Hi all,
i want to create a checklist for rpd..that tells about what are all the best practices that we have to do..
we have to write some script based on this script only it has to create the checklist.
Thanks in advance
Edited by: 988084 on 13/05/2013 02:34Hi,
Pls refer the following link...
http://www.peakindicators.com/media_pi/Knowledge/25%20-%20twenty%20golden%20rules%20for%20rpd%20design.pdf
Thanks,
Jprakash -
Want to create a menu/list that expands with additional links when you rollover it
The hardest part about using the "help menu" is figuring out
what to search for.... I want to create a button on my website that
expands to additional options/links when you roll over it.... An
example would be on this Adobe website.... There is a bar across
the top that says solutions, products, etc. When you roll over it,
the link expands to additional options.... If someone can tell me
what to search on in the help menu, I can take it from there....
Thanks,
NancyHaaga wrote:
> The hardest part about using the "help menu" is figuring
out what to
> search for.... I want to create a button on my website
that expands
> to additional options/links when you roll over it.... An
example
> would be on this Adobe website.... There is a bar across
the top
> that says solutions, products, etc. When you roll over
it, the link
> expands to additional options.... If someone can tell me
what to
> search on in the help menu, I can take it from there....
http://www.google.com/search?hl=en&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=css-based+drop+ down&spell=1
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
The perfect FAQ page:
http://www.TJKDesign.com/go/?9
CSS-P Templates:
http://www.TJKDesign.com/go/?1
CSS Tab Menu:
http://www.TJKDesign.com/go/?3
Maybe you are looking for
-
I would like to place all my content in one location and share and move it as needed to my various apple devices. What's the best way to do it?
-
Hello Is it possible in pse 7 slide show to bring in more than one photo per screen shot ie like picture of Mom and Dad and then bring in smaller photo's of children on same slide. Roxy
-
Using Faces to find photos with multiple people
I'm new to Aperture and I'm eager to learn how to make it work. One of the tasks I often need to do is find photos that have two people in it - me and my sister, for example. How can I use Faces to search my library in this way? Thank you!
-
Error deploying application from BPMA to HFM
I am trying to deploy a consolidation application created in BPMA and I'm getting the error below (the application did validate properley). The app deployed fine initially but I've since added dimensions and members to it. The error is as follows: Er
-
Trying to create a slide function..
Hello, I am trying to create a table of contents that can slide off the left side about 6 inches and will still show my main page beside it. I saw a slide function in one of the DPS videos, but cannot seem to find it. My other option is creating a H