Want to create interactive pictures that the viewer can zoom and pan

I want to make every image on this page zoomable on an ipad or iphone or whatever, within their current frame.  Found a bunch of useless information about slideshows, but no step by step instruction on how to accomplish this.  A
moderator locked down my last question instead of moving it.  I hope this one is in the right spot.

No result? Of course not. The preview panel is for SWF export only.
You need to preview it on the iPad or in the desktop Adobe Content Viewer.
Speaking of which, when was the last time you updated the tools?
Bob

Similar Messages

  • When I want to create a new project the view screen on the right is blank ? Since creating a new project, when almost done something happens

    When I want to create a new project the view screen on the right is blank ? Since creating a new project, when almost done something happens

    Hi
    Need more info
    • Free space on Start-Up (Mac OS) hard disk - How much ?
    • Did You try to trash iMovie pref. file while iMovie is NOT running ?
    • Can it be something that corrupt Your movie project e.g. use of alien video codecs or audio file formats ?
    (What did You use ? Video-codecs, Audio file formats and Photo file formats ? )
    Yours Bengt W

  • I've lost my photos (crashed hdd, iPhoto library on Time Machine corrupt too).  Is there a way to create a picture from the thumbnail that remains in iPhoto?  The quality is obviously poor, but better than nothing.

    I've lost my photos (crashed hdd, iPhoto library on Time Machine corrupt too).  Is there a way to create a picture from the thumbnail that remains in iPhoto?  The quality is obviously poor, but better than nothing.

    Time machine should have a good copy - how are you determining that it is corrupt
    If you want the thumbnails as photos right click on the iPhoto library and make a copy of the data folder and then import it into a new iPhoto library - it contains your thumbnails
    LN

  • Is there dvd software out there that allows you to create a dvd menu in which the viewer can choose to play different sequences of the videos offered?

    Is there dvd software out there that allows you to create a dvd menu in which the viewer can choose to play different sequences of the videos offered? It was described to me as a dvd matrix menu but I can't find anything like it for mac. The idea is that there are multiple videos on the dvd menu and you can choose to play "video A, then B, then C" or "video B, then C, then A", etc, in different orders each time. And it would play the sequence that you choose.

    meghanica wrote:
    I think that's on the right track but I'm wanting something that allows the viewer to choose the sequence when they're looking at the DVD menu. I only see how the creator of the DVD can make different sequences. It's a yoga tutorial DVD and we are wanting the viewer to be able to pick a sequence from the menu items as such: pick one of the 3 warm-up videos, then pick one of the 2 yoga practices and then pick 1 of the 3 cool-down videos and then the dvd will play the sequence of selected warm up, practice, then cool down. And it can be differently chosen every time the viewer uses the menu.
    You can do this on a DVD with DVD Studio Pro.
    DVD's have some very basic storage called SPRM/GPRM scripting IIRC.
    There are a few tutorials around for DVDSP…
    http://www.kenstone.net/fcp_homepage/dvd_language_nattress.html
    http://www.digitalproducer.com/article/DVD-Studio-Pro-Scripting-Part-4-28784
    You use scripts to set values that are stored in a tiny amount of memory on the player & then have to use additional scripts to respond to the values set, so that at the end of a sequence it will jump to the one a user previously chosen.
    Some things to consider…
    DVD's have limits on the number of chapters & titles, you need to plan around that.
    Some DVD players are terrible to navigate, the settings that a user selects will be forgotten when the player is powered off. Users will need to make the choices over & over, every time they use the DVD (computers may remember it - I haven't tested this in years).
    You will also need to setup many variations of menus to be able to indicate what selections they chose.
    It is not a trivial task, you may want to hire a programmer to set it all up.
    Testing is also a lot of work - too many combinations can quickly cause issues for testing, different players can also do odd things too.
    I have used scripting for basic, 'play all' or 'play chapter' menus where the video is encoded once on the DVD & the scripts will either play through, or simply play a chapter & return to the same menu.
    You may find that it would be better to invest in setting up a website with this. On a custom site it would be possible for users to save a playlist or several, they can also share playlists etc, it would be more flexible & usable IMO.
    See roaring apps for info on others who have used DVD Studio Pro with various OS's…
    http://roaringapps.com/app/dvd-studio-pro …it looks like 10.8 may be the last OS to work correctly with DVDSP.
    Other DVD authoring apps may be able to do GPRM scripting too, but you will have to search for them.
    I think the registers are part of the DVD spec, so devices should support them, https://en.wikipedia.org/wiki/DVD-Video

  • I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order

    I want to create an array that goes into a case structure where each element in the array is an individual case and gets done in order. Any ideas, I've been playing with the idea but have had no luck, is this even possible?

    Hi,
    Please check it out the attached Vi.. Is this you need?
    Sasi.
    Certified LabVIEW Associate Developer
    If you can DREAM it, You can DO it - Walt Disney
    Attachments:
    Event.vi ‏11 KB

  • I want to create a form that I can change at an instance that will store the information without replacing it

    I want to create a form that I can change at an instance that will store the information without replacing it: Here are examples of what i have:
    This is the form:  The True/False in column B are actually check boxes
    Date
    Job Name
    Start
    End
    Hours Worked
    Per Diem
    Wednesday, Mar 5, 2014
    Duke University
    7:30 PM
    2:30 AM
    7.00
    Arellano, Paul
    TRUE
    Wednesday, Mar 5, 2014
    Duke University
    7:30 PM
    2:30 AM
    7.00
    0.00
    Blackwell, Zach
    FALSE
    Christian, Charles
    TRUE
    Wednesday, Mar 5, 2014
    Duke University
    7:30 PM
    2:30 AM
    7.00
    0.00
    Christian, John
    FALSE
    Currence, John
    FALSE
    Curtis, Brandon
    FALSE
    Hawkins, Tyre
    FALSE
    King, Corey
    FALSE
    Nunez, Jose
    FALSE
    Rangel, Antonio
    FALSE
    Rice, Eric
    FALSE
    Salgado, Ricardo
    FALSE
    and the sheet that the index to looks like:
    Saturday, Mar 15, 2014
    Rice, Eric
    Providence College
    9:00 AM
    7:30 PM
    10.50
    1
    Saturday, Mar 15, 2014
    Rice, Eric
    Virginia Beach
    7:30 PM
    2:30 AM
    7.00
    Saturday, Mar 15, 2014
    Salgado, Ricardo
    0.00
    Sunday, Mar 16, 2014
    Arellano, Paul
    Providence College
    7:00 AM
    8:00 PM
    13.00
    1
    Sunday, Mar 16, 2014
    Blackwell, Zach
    0.00
    Sunday, Mar 16, 2014
    Christian, Charles
    0.00
    Sunday, Mar 16, 2014
    Christian, John
    0.00
    Sunday, Mar 16, 2014
    Currence, John
    Providence College
    7:00 AM
    8:00 PM
    13.00
    1
    Sunday, Mar 16, 2014
    Curtis, Brandon
    0.00
    I want to be able to fill out the form and it place itself into Sheet 1 without changing everytime.  I can index the array from the form, but it changes everytime.

    You think it would be the other way around.
    Just speculation, but forms probably came to iOS first because of likely use for data entry in the field that syncs back to the Mac.  On a small screen with a touch interface, forms make inputing values easier.
    On the Mac, with its bigger screen, typing directly into a data table often works well enough.
    SG

  • I want to create a form that i can drop pictures in a certain place

    i want to create a form that i can drop pictures into

    Unfortunately Formscentral does not support drag and drop pictures into your form. If you want to form filler submit their images with other form data, you can use file attachment field. Add an file attachment field when design form, so that form filler can add their image file into it and submit with other form data.
    Thanks,
    Pengpeng Sun

  • IDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops in that the viewer access from the main menu to play along with

    iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with

    Export the slideshow out of iMovie via the File  ➙  Share ➙ File menu option as a 480p Quicktime movie.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

    i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

    Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

  • If I want to create a Group that is Group by page,Is that feasible?

    Hi, Expert
    I want to limit record number(50 records) per page,
    and it will have a total column which is amount Salary,
    so now I had set some formulas into report
    First(in report Details)
    WhilePrintingRecords;
    Global   numbervar   DataCount   :=   DataCount   +   1;
    ps.This variable counts record number and limits record within 50 records per page
       when record passover 50, it will re-set variable to 0(this formulas set in Group Footer)
    second(in Group Footer)
    WhilePrintingRecords;
       Global numbervar DataCount := 0;
    ps.for re-set variable
    third(New Page After)
    Truncate ({@DataCount}/50)*50={@DataCount} and OnLastRecord=false
    ps.For Next page
    Fourth
    WhilePrintingRecords;
    Global numbervar pagetol;
       salarytol:=salarytol +{table;1.amount}  
    Fifth
    Global numbervar pagetol;
    if (Truncate ({@DataCount}/50)*50)={@DataCount} then
       pagetol:=0;
    If I want to create a Group that is Group by page(50 records per page), because I want
    to grand total of salary per page,Is that feasible?
    How to achieve this goal??
    Thanks & Regards

    Thanks lanWaterMan
    Actually, my care is Report View,
    my report will have Three Summary columns,
    one is for 50 records,
    second is for data type,
    another is for all of records.
    I will put the First Summary column behind(below) the last records
    So it will look like "Grand total"(for 50 records 1 total).
    And the Second Summary column will lay on Group footer(sum data group by data type).
    And the last Summary column will lay on every page's bottom(sum all of data).
    If I put first summary column in page footer, It will lay on bottom of page, not behind the last records(per fiftieth record).
    So I think if I create group1 for 50 records(put in first Summary column on group1 footer) and group2 for data type(put in second Summary column on group2 footer),
    then put the last summary column into page footer. Maybe, it will look like what i want.
    Thanks & Regards

  • Using tables - wanting to create long table that runs from page to page

    I want to create a table to which I can add rows as I work (alphabetizing). The final table will end up being 6-7 pages long. Inserting a page break did nothing--all rows below where the page break is still disappear and do not go onto the next page. This is a Word feature that I'm hoping I can have on appleworks. Does it exist?
    I cannot put Word on this computer since I'm not running an OS high enough (I have 10.2.8)

    Cyndi:
    Just wondering if you found your answer. I am having the same issue. I did finally figure out after several days of reading searches how to add pages to your table which is in >Format > document > then select the box for how many pages you want to go down or across in the box to the lower right corner. Then you can insert cells by highlighting the row by holding option key as you drag across the row & in Table click insert cells. Hope that helps. You can determine whether the table is horz. or vert. in > file > page set up. Click on the image of the page/man that displays the orientation that most closely fits your needs.
    However, the problem that I'm continuing to have is that the >insert page break command does not appear to work in Tables. It remains greyed out no matter what I've tried. Short of trying some "tell" command that a fellow using 10.4. in Pages suggested. I'm in Appleworks 6 running on my iBook, as you are. I saw a reply from ms Peggy suggesting that there is some difficulty in getting that to work, and so far I would have to agree. Her idea was to add cells such that they would fall over the page break, which you can see using the >page view command in the Window drop down menu. But that would not be so neat with the lines running vertically from the top of page to the first box. I guess it could be squeezed down to the size of the "break". Is that all there is ?
    iBook G4, 14, 933 MHz,   Mac OS X (10.3.9)  

  • I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

    I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

    Ah that was it, thanks a lot common sense really but thanks for the help

  • I want to create fillable PDF that can be used by many people running on both MAC and PC.  What Adobe product should I use?

    want to create fillable PDF that can be used by many people running on both MAC and PC.  What Adobe product should I use?

    Hans-Gunter
    Thanks so much.  I downloaded Acrobat XI.  It's been "extracting" for the past 30 minutes (even with a fast wi-fi).  Hope this is not a problem.
    Anne

  • HT200238 I want to create my profile so the passcode lock setting is inaccessible on the iPads I deploy.

    I want to create my profile so the passcode lock setting is inaccessible on the iPads I deploy.  In other words, I do not want users to be able to set the passcode on our iPads.  Is there a way to do this?

    I seem to remember the discussion suggesting to use the Restrictions passcode to prevent users from accessing the passcode - parental controls. I may not remember it correctly. A passcode must be set, then the restrictions passcode is used to set controls on the user. Putting the device into supervisor mode then locks it permanently. That's sort of how I remember it.
    Found the discussion link: How do you keep users from resetting ipad

Maybe you are looking for

  • Thinkpad X40 Hotkeys not work on update

    Hi all, I had finally sorted out my hotkeys using acpid, as in this post: https://bbs.archlinux.org/viewtopic.php?id=130121 However, on updating with pacman, my acpi_listen events are now button/fnf1 FNF1 00000080 00000000 button/battery BAT 00000080

  • Can't drag or drop!

    I suddenly am unable to drag or drop files on my laptop. It detected a virus (Sophos) but I deleted the files. Now it won't seem to work! Please help if you've encountered this problem before!

  • Read and deleted messages are not being updated on my iphone 4s

    I have a new user who is having a synchronization issue with his iPhone.  When he reads emails on his desktop, the messages on his iPhone 4s show as being unread.  Also, when he delets messages on his desktop email, messages are not being deleted on

  • How robust is PDF-Password protection? Does it also work for PDF/A?

    Several sources say that PDF passwords can be removed with appropriate software. Is this true? Can I also protect a PDF/A with a password? If not, how can I be sure that I can still open a regular password protected PDF in 10 years from now? Many tha

  • JLable set Text

    I have a jFrame called Browser and a class Receiver already running. The most important method of Receiver is an event listener that listens to messages coming from other classes. Everytime i receive a message i have to put this message into my jLabl