Want to know basics of modulation analyzer, want some document to study.

I want to know basics and characteristics of modulation analyzer. I need the documents to study. Could you please help me?

I'm assuming you're looking for information about our PXI-5660 and PXI-5670 products. They are our RF Signal Analyzer and Generator, respectively.
Here's the product page for the 5670:
http://sine.ni.com/apps/we/nioc.vp?cid=13491〈=US
and the 5660:
http://sine.ni.com/apps/we/nioc.vp?cid=12591〈=US
If you scroll down to the bottom, you'll see some links to more documentation like the Product Manuals.
Let me know if you're looking for something else.
Jack

Similar Messages

  • Want to know the function module for Partial Payment F-28 in FI

    Hello all
    i want to know the Funtion Module for the documents in which Partial payment have been made .
    For that i have the customer and invoice number .

    Hi,
    Use the FM FI_TERMS_OF_PAYMENT_PROPOSE for calculating the Payment due date call function     'FI_TERMS_OF_PAYMENT_PROPOSE'
    hope it will help u.
    thanks,
    Neelima.

  • I want to know about ehs module and flow

    hi,
    This is kishore. I have been assigned to ehs module. i want to know about that how it helps industries and flow of the module.
    K. Kishore

    hi kishore
       Please go thru this link
      http://help.sap.com/printdocu/core/Print46c/en/data/pdf/EHSSAF/CAGTFADM-EHS.pdf
    reward points if it is helpful.
    Regards
    Alfred

  • I want to know Basic Deployment of the Cisco Unified Videoconferencing Solution

    Dear all,
              I need a soluation of the Cisco Unified Videoconferencing products. I am couldn't select a MCU 3500 series device.Because of i haven't enough knowledge about this products.
    My client told me there have three remote location they want to Videoconference HQ office.Please tell me what kind of device i choose? there have 512kbps bandwidth. The remote side are connected Telco modem.i need a Bill of materials.
    regards.
    Parosh

    I am not here to belittle your skills.  But it's good that you admit that you're not good at setting up VCUs.  It's also good that you're starting from scratch.  SO my recommendations to you and your company is to get a consultant in.  If you make a mistake, your name and reputation is on the line.  IF a consultant makes a mistake, they have no choice.

  • Want to know about ACE module in 6509 : load-balancing concept

    Hi,
    I am quite new in this field , where i need to configure and understand the concept of load-balancing through ACE.
    In my existing network set-up , i have some application servers as well as some other servers where i am looking for load-balancing.
    I have gone through some of the site and cisco site as well and i came across ACE module which can be installed in 6509 switch.
    I have 6509 switch as well but before going for installing the ACE module I am keen to understand below things:
    1) what is difference between CSM or any other product load-balancer and ACE module :
    Gone through site as well , but not getting proper answer or comparison.
    1) I have some of the server configured with clustering and getting one virtual IP, In this case , will ACE work ?
    2) If suppose i go for configuring different IP address with all server IP :
    How do i achieve it ?
    3) what is Virtual IP concept in ACE because i do not have and other ACE module then why do i need virtual IP ?
    4) will the load-balancing happens based on destination based or session based ?
    Please share the knowledge. It would be great help for me to go ahead with ACE and configure it and understand all the application ?

    Hello,
    1) what is  difference between CSM or any other product load-balancer and ACE  module :
    There are several differences but to say simply, you get higher performance and more features with ACE module/appliance comparing others.
    One big difference is that with ACE seriese, you can configure multiple contexts on one box (virtual load-balancers on one box) that makes us possible to provide a virtual load-balancer to a customer. In that way, the customer can access and makes changes on only the virtual box. You can split management domain for each customers. Also using contexts, you can assign certain resources available on the hardware for each contexts according to their service contract.
    ACE serise has specific hardware chip for supporting SSL termination but some others do not.
    For instance, you need a CSM-S, or a CSM and a SSL module to terminate SSL.
    The other thing I should mention is that our most recent product is ACE serise that means it has longer product roadmap.
    Let me try clarifying your other questions.
    3)  what is Virtual IP concept in ACE because i do not have and other ACE  module then why do i need virtual IP ?
    4) will the load-balancing happens  based on destination based or session based ?
    I think I'd better to put 3) and 4) first.
    Virtual ip  address (VIP) is the address to which client accesses.
    VIP is tied with a  serverfarm or serverfarms, in a serverfarm one or multiple rservers can  be configured.
    "serverfarm" is a group of "rservers".
    "rserver" means  real-server that has an ip address and processes transactions.
    When a client  accesses to the VIP, ACE picks up a rserver according to algorithm.
    If you configure a  VIP that is tied with a serverfarm where only one rsever is  configured, client accesses to the virtual ip address are
    all forwarded to  the rserver.
    If you configure a  VIP that is tied with a serverfarm where multiple rsevers are  configured,  client accesses to the virtual ip address are
    balanced among  those rservers.
    If you configure  multiple VIPs, client accesses to those VIPs are forwareded to  corresponding rservers according to configuration.
    1)  I have some of the server configured with clustering and getting one  virtual IP, In this case , will ACE work ?
    ACE load-balances connections to configured rservers.
    If the clustered servers are sharing one virtual ip address and you configure the virtual ip address as a rserver, all connections are
    sent to the virtual ip address. That is not "load-balancing" on ACE... You need multiple rservers to which ACE load-balances connections.
    2) If suppose i go for  configuring different IP address with all server IP :
    How do i  achieve it ?
    You can configure those ip addresses as rserver ip address.
    Multiple rservers are tied into a group, "serverfarm".
    I'm not certain about your culstered servers but I guess you can configure each ip addresses in the culster as rservers.
    Then put those rservers in a serverfarm.Client accesses to a virtual ip address configured on ACE for the serverfarm.
    This way connections are load-balanced among those rservers depending on load-balancing algorithm you choose.
    Above is just an overveiw. ACE gives you granular control not mentioned above.
    I can provide more specific information if you tell me details of what you are trying to archive with ACE.
    Regards,
    Kimihito.

  • I want to know what version of Microsoft Word my documents are being scanned into

    PLEASE HELP

    Sorry, I cannot understand your question.
    What are you scanning, using what software?
    If your file is
    .doc: Word 97-2003
    .docx: Word 2007-2013

  • HT1848 Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no ch

    Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no charge?

    will I be able to sync my music from computer to new iPod at no charge?
    Yes, you will.

  • I want to know the accounting produced by Oracle Financials module.

    I want to know the accounting produced by Oracle Financials module. Could you please direct me to the right resource? Thanks

    Hi,
    Overall answer is YES you can read text file into Oracle.
    Now tell us which technologies you are using and which database version you are using ? are you using Jdeveloper and ADF ?

  • I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

    I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

    Hi S. Vishwam.
    Many peoples says that BI , APO , BW and HANA are the highest paying modules.
    But with the passage of time the value of the professional decreases because many people go work with this modules then ...supply and demand = decreases.
    Only the people that really knows continue making lots of moneyand the characteristic of these people are the same:
    They always read the SDN community of his modules.
    They really study the sap help.
    They do not want to make lots of money early on.
    Hope helped you.

  • Want to know about SAP course and SAP modules

      I am Sandeep, done BBM and have 3 years experience as Medical Representative(Pharma sales), and i'm perusing MBA in Sikkim Manipal University Distance Education, i came to know that SAP course has lot of scope in major industries, so that want to know about SAP course and SAP modules available and which module is suitable for me and details about the cost, duration of course please guide me
    Message was edited by: Colleen Lee - moving from Careers space to Training and Education.Also removing the bold text formating

    Ashok,
    Hi! Excellent that you are take the next steps in your education and applying them to work experiences.
    The best approach in taking SAP-related courses is to contact the university and confirm their approach. View SAP UA member schools here - http://uaaroundtheworld.informatik.tu-muenchen.de/overview(bD1lbiZjPTEwMQ==)/start.htm
    ...and assess the ones in the UK which does include Brunel.
    Ask if they provide SAP-related curricula (or supplements) and hands on SAP software in this course or others that you can take in your program.
    Best regards,
    Richard

  • ABAP FRESHER WANT TO KNOW WHAT ARE ALL THE MANDT FUNCTION MODULES

    WHAT ARE THE FUNCTION MODULES WANT TO KNOW AS A ABAP FRESHER, AND WHAT THINGS WANT TO LEARN THAT FUNCTION MODULES  PLEASE GIVE ME SOME BRIEF PROCEDURE.
    Moderator message: I suggest you read the Rules of Engagement of this forum first.
    Edited by: kishan P on Nov 23, 2010 1:45 PM

    Hi jyothi,
    Thanks for your reply.
    I know how to read the text elements, For the FM you said, i have to pass each langu (form t002) for each text element and check if it is maintained in that langu or not.
    that was not my question, i should first know all the langu, so that i can use the READ statement for only those langu to get the texts.
    checking for all the langu causes redundancy is what i feel.
    Regards,
    Sowjanya

  • Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the act

    Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the activtion server will be back online and will it solve my problem with no service and invalid sim error

    I was quite surprised by that. And I've been off for a little because I've been giving final exams at the college where I work. Now with break I will be spending a little more time on here until I have to start getting ready for the Spring semester. I have experienced a couple of interesting posters in the past week though. I wa afraid one was going to reach through the CAT 5 and grab me around the neck.

  • I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures.

    I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures. Also, how should I go about charging my computer? Should I wait until it is close to dying and then charge it?

    I have had good success with HGST and Seagate HDDs.  I suggest a HDD that is powered by the MBA eliminating the need for an AC cord.  They now come up to 1.5 TB in capacity.  In my opinion, one cannot have too much storage.  If necessary, let your bank account be your guide.
    Ciao.

  • HT201412 My Ipad quit working - it's 2 years old.  I called Apple and they basically told me that it's done.  I can pay 249.00 to get a reburbished Ipad 1, or buy a new one.  I want to know why it died?  They mentione it could be the hard drive.

    My Ipad 1 quit working after 2 years.  Was never dropped, abused, etc.  Just quit the other night.  Went to the Apple store, called the support line and they tell me that since the warranty is up I can pay 249.00 for a refurbished Ipad or buy a new one.  Not happy at all.  I want to know why it quit.  The person I talked to at Support says he doesn't know what happened.  He says it sounds like my hard drive crashed.  ANyone else have this problem?  I am so mad.

    If the tech you talked to said anything about a "hard drive", he was completely ignorant or misspeaking rather badly. The iPads have no hard drive; the storage is all solid state. You may wish to talk to another technician, or make an appointment at an Apple Store if there's one near you, and confirm the diagnosis of a hardware failure.
    If you've confirmed that it is indeed a hardware failure, then you can pay the replacement price, find an independent iPad service shop and see if they can do a repair for less, or buy a new iPad. If it were me I would put the money toward a new, or at least newer, iPad rather than pay the replacement charge. You can get some good deals on refurbished iPad 2 and third-generation iPads from the Apple Store, any of which will run the most current versions of iOS, something which the first-gen iPad will not, and would come with a full warranty (which could be extended to two years with AppleCare).
    As to why your iPad failed, it's impossible to say with any certainty. The circuitry could have had a tiny flaw that finally failed, or the iPad could have received a static shock, something quite common in many areas in the winter when the air is dry.  Sorry it happend to you, but anything can fail.
    Regards.
    Message was edited by: varjak paw

  • I want  to know about smartforms

    hi experts tell me
    i want to know about smartforms
    anybody have material pls send me
    thanks in advance

    SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
    According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
    1. Create a new smartforms
          Transaction code SMARTFORMS
          Create new smartforms call ZSMART
    2. Define looping process for internal table
    Pages and windows
          First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
          Here, you can specify your title and page numbering
          &SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
          Main windows -> TABLE -> DATA
          In the Loop section, tick Internal table and fill in
          ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
    3. Define table in smartforms
    Global settings :
    Form interface
    Variable name    Type assignment   Reference type
    ITAB1               TYPE                  Table Structure
    Global definitions
    Variable name    Type assignment   Reference type
    ITAB2               TYPE                  Table Structure
    4. To display the data in the form
    Make used of the Table Painter and declare the Line Type in Tabstrips Table
    e.g.  HD_GEN for printing header details,
            IT_GEN  for printing data details.
    You have to specify the Line Type in your Text elements in the Tabstrips Output options.
    Tick the New Line and specify the Line Type for outputting the data.
    Declare your output fields in Text elements
    Tabstrips - Output Options
    For different fonts use this Style : IDWTCERTSTYLE
    For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
    5. Calling SMARTFORMS from your ABAP program
    REPORT ZSMARTFORM.
    Calling SMARTFORMS from your ABAP program.
    Collecting all the table data in your program, and pass once to SMARTFORMS
    SMARTFORMS
    Declare your table type in :-
    Global Settings -> Form Interface
    Global Definintions -> Global Data
    Main Window -> Table -> DATA
    Written by :  SAP Hints and Tips on Configuration and ABAP/4 Programming
                        http://sapr3.tripod.com
    TABLES: MKPF.
    DATA: FM_NAME TYPE RS38L_FNAM.
    DATA: BEGIN OF INT_MKPF OCCURS 0.
            INCLUDE STRUCTURE MKPF.
    DATA: END OF INT_MKPF.
    SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
    SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
       MOVE-CORRESPONDING MKPF TO INT_MKPF.
       APPEND INT_MKPF.
    ENDSELECT.
    At the end of your program.
    Passing data to SMARTFORMS
    call function 'SSF_FUNCTION_MODULE_NAME'
      exporting
        formname                 = 'ZSMARTFORM'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        FM_NAME                  = FM_NAME
      EXCEPTIONS
        NO_FORM                  = 1
        NO_FUNCTION_MODULE       = 2
        OTHERS                   = 3.
    if sy-subrc <> 0.
       WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
      TABLES
        GS_MKPF                    = INT_MKPF
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
        OTHERS                     = 5.
    if sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    also refer
    http://www.erpgenie.com/abap/smartforms_detail.htm
    http://www.sap-basis-abap.com/abphy.htm
    <b>http://sap.ionelburlacu.ro/sap0/sapsf001.htm
    http://www.ionutz.ro/sap/sapabap01.htm[very imp links]</b>
    http://www.sap-basis-abap.com/sapsf001.htm
    regards,
    srinivas
    <b>*reward for useful answers*</b>

Maybe you are looking for