Want to open specific file from DMS Doc. thorugh Function

HI,
is there any function module to open specific file from DMS Document. ?
There is already one function module DOCUMENT_SHOW_DIRECT to open File from document. But
in case of there are more than one file in DMS Document is it giving me Popup menu to open file from List.
I just want to open any single file without any popup from DMS Document.

Hi,
from standard point of view this kind of pop-up is always raised by the function module in case there are multiple originals assigned to the document info record.
Best regards,
Christoph

Similar Messages

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

emilypdunne wrote:
Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

How do I open pdf file from web? Opening pdf docs from hard drive works fine.

Hello,
I am unable to open pdf files from the web. Documents on my hard drive open fine. My computer gives me 2 error messages when I try to open web-based documents. Thanks.

Why did you post so many informations about operating system, web browser, Adobe Reader version, and the error messages?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

Numbers freezes when I attempt to open a file from the iCloud

Hello,
My Numbers app for my iMac freezes when I attempt to open a spreadsheet file from the iCloud. These same files open fine on my iPad, and I make sure to close Numbers on my iPad before I attempt to open the file on my iMac, but it makes no difference. The app freezes, and I have to manually force stop the Numbers process. Any help would be appreciated.

How do I get the dock to recognize the latest numbers version I have.
Go to the Applications folder, find Numbers 3 and drag it to the dock. It will then look like the lower icon here (the one with the 4 columns).
Another way is, if Numbers 3 is already open, to right-click the icon in the Dock and choose 'Keep in Dock' under 'Options':
You can drag the icon with the three columns off the Dock if you don't want to open Numbers 2 from the Dock.
SG

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Open documents/files from Application Server in forms 6i

Hello All,
Our requirement is to open files that are in Application server( We do not want to upload them into database).
Is there a way to open this files from forms 6i.
I am wondering how the "View Output" or View log button works on the concurrent program submission form. Its the doing the same thing i.e pulling the file from Application server and showing up.
Please let me know if anyone has any ideas on how to get this done.
Thanks
Sunil

I assume you are using Forms 6i in web mode here. Then it is just a URL to the file if you properly map to a directory where you store the files:
web.show_document('http://...../myfile.pdf');
But it also looks like you are using Oracle Apps, so might want to ask it in the e-Business Suite.

Open a file from anywhere - with credentials?

Hi;
Is there a way to open a file from anywhere where I give the uri and uname/password and it gives me back a Stream to read? Including:
1. ftp - with/without credentials
2. http - anon, basic, digest, & windows authentication
3. REST where you must do basic on the first request (anon returns an error message as an html page).
4. share on the same domain - requires a different user's credentials.
5. share on a different domain
6. share on a workgroup computer
7. share on a non-Windows server
8. ???
thanks - dave
Edited by: [email protected] on Sep 15, 2010 2:04 PM

[email protected] wrote:
Hi;
I just wanted to add the use case so you would understand why we need to handle all cases. I suggest that you actually ask customers what they want initially instead of assuming that you need all of them initially.
We have a reporting system we sell and one thing users can do is import images from an external source. Some users put their images on a web or FTP server requiring credentials. Others put it on a server that requires credentials. And we're now getting requests to pull from SharePoint.Fine. So you have the following task that has the following steps.
1. Define source of image and where to store it.
2. Create retriever based on 1.
3. Run instance of 2
4. Log errors from 3 or put retrieved file into location specified by 1.
In the above step 2 is a plug in that represents different ways of retrieving information.
And expanding on something that was said before you have a HUGE task in front of you in terms of supporting everything that you list above.
For example using only ftp these are some of the things I see.
1. There are at least three types of secure "ftp" servers. The protocol for handling security is different for each.
2. Although FTP is a protocol the implementation of how the servers work can be substantially different. For general handling the will likely require scripting for each targetted server.
3. Locations on FTP servers not necessarily simple. Examples.
...a. Login to server. Cd to a directory. Get a file which has a date as part of the name.
...b. Login to a server. Cd to a directory with a timestamp in the name. Get a file.
...c. Login to a server. Get a file which has a random name based on the last creation timestamp of each file.
Note that FTP is actually easier than some of the other cases.
And in the above I didn't deal with any of the possible errors.

Can't open INDD file from icon

I have an installation of InDesign CS3 (upgraded from CS2) that won't let the user open a file from it's icon. You get the error message of "<filename> is not a valid win32 application" The file will open if you open InDesign and use the file open menu. The icon isn't the InDesign icon either-looks like a doc file icon without Word installed. I've gone into File Types (from the Tools-Folder Options-File Type window) and tried to manually made the indd file open with CS3 but that still didn't work (oddly when I try to use the CS3 icon it too has a generic .exe icon).<br /><br />If I log in as myself (admin rights on the Windows XP) and once I did the above it worked for me. I gave the user full rights and tried the above again but it didn't work-still wouldn't open by clicking on the icon-just keep getting that error message. Any help would be great as I can't seem to come across anything googled that is helping.

This is a follow-up. My question has been answered in that did get to open the file as follows:
By trial and error (based on responses) basically I was able to open the file as a copy from inside InDesign. There are three options in the lower left had corner of the window, I picked copy after trying the other two. Up until this time I could not find any idlk file.
Once I opened the file I backed it up and made another copy that I opened. I went back to the original file and tried to open it from finder. It would not open. Still no sign of the idlk file. But when I went back to open the work copy it opened but now the idlk file popped up in the finder and it continues to do so every time I open any file associated. This idlk file comes up with an icon that says "Locked"
My only question now: Is there a way to unlock this file from whatever it is linking to? Does it make any difference at this point?
I have learned this is a temp file of sorts that prevents changes to the original file. I would like to unlock the file so that it not connected to anything.
I have moved or deleted all files that it might be linking to. I have shut down other computers and hard drives using the same network. The idlk file come up every time. It goes away when I close the file. I have also deleted it while the file is open. I deleted all attempts at creating Book files. I'v been through preferences and checked Assignments. It seems like once you make a copy of a file, the original is always looking for the copy? Or the copy for the original?
So I'm working and making separate files for each chapter so that I can set up a book and have back-up and maybe create a whole new Book file that isn't linked to anything else but maybe that's not necessary.
I've been working with InDesign for a long time and never encountered this phenomenon before.
Thanks again for your responses.
Jim

Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

I am unable to open files on amything!!! a box pops up that asks me what do i want to open the file with..every time!! I want files to open when i click on them!! This happens with emails, websites, everything

I try to open attachments in emails and they will not open! A box comes up asking 'what do I want to open the file with', and it wants me to select from a list of options like - Firefox, IE, Word, Yahoo Browser. When I make a selection (usually Firefox) a new tab opens with a blank page! This always happens on attachments, links, websites......everything!

These files were lost two years ago.
That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

Opening Excel Files from DB (blob column)

My project has implemented a WEBUTIL solution to attach files into the database, view the files stored in the database (in a BLOB column), and remove the files stored in the database.
Everything has been running smoothly. We are in final testing and have found a couple of interesting scenarios ...
When a user tries to view an Microsoft Excel 2007 file from our application, the Excel file displays properly (as long as Microsoft Excel isn't already open - outside of our Oracle application). Once the Excel file is viewed, the system will not allow the user back to our application until after the Excel file is closed (we use the start /wait myExcelFile.xls ... command). This works perfectly for us.
The two scenarios we encounter occur when
1.) The user has Microsoft Excel open outside of our application and tries to open an Excel file from within our application, or
2.) The user has the file already open (either from within our application or outside of our application) and then tries to open the file from within our application.
Let me explain a little further because the above two scenarios are interrelated.
When a user has Microsoft Excel open (outside of our application), and then clicks the button to open the Excel file, the system will open the file as another window (within Excel). The system will allow the user to navigate back to our application (where as, if Excel is not open outside of our application, the system will not allow the user to navigate back to our application). Once the user navigates back to our application (while the file is still open), the user can click the button to view the file again. At this point, the user is displayed a WUT-105 error message (I assume b/c the system is trying to open a file that is already open).
I assume the two solutions are the following:
a.) Do not allow a user to open a file that is already open (not sure how to check this from within Forms ?)
b.) Do not allow a user to open an Excel file when another EXCEL process is already running (this will avoid allowing the user to naviagate back to our application)
I don't know if there is a better solution.
Do you experts have any recommendations?
We are using Oracle Application Server 10g R2 (10.1.2.0.2), Oracle Database 10g R2 (10.2), and Oracle Developer 10g (10.1.2.0.2)
I hope this all makes sense.
Thanks,
Mike
Edited by: user639843 on Oct 20, 2008 2:15 PM
Edited by: user639843 on Oct 20, 2008 2:20 PM

Thank you, Thank you, Thank you!!!!
I believe that will work (adding a sequence number to the end of the filename)!
We do not allow a user to update the file, only view. If a user wants to make a change, they need to remove the existing file (from the database), create a new file (outside of our application), and attach the file in our application (into the database). All updates occur outside of our application - we are not a document authoring system, just a document storage system.
Once again, many thanks on the solution!
Mike

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

In CS 5 I am able to open all files from Bridge but is PS CC I can only open .tif files

In CS 5 I am able to open all files from Bridge but in PS CC I can only open .tif files, all other files I get file not found. What is wrong?

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/photoshop

Want to open specific file from DMS Doc. thorugh Function

Similar Messages

Maybe you are looking for