Want to print wirelessly from macbook pro to wired PC and printer

Want to print wirelessly from macbook pro to wired PC and printer using wireless router.
I am having trouble setting this up? help? suggestions?

> Printer is showing its location as a direct connection via USB
But it's on the PC right ? So it's a shared network printer with a Spooler (this is how it should be configured using Prnter Setup Utility ...)
> If I click to run dic utility there are no clickable options... only lists calculate image checksum.
Once Disc Utility is launched, select your local hard drive then the [Repair Permissions] button bottom left will light up.

Similar Messages

  • HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII  failed. can anyone help. I have been able to print on this printer for

    I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

    "/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
    I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
    2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
    Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
    Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
    (with thanks to Yuengdog1983):
    This issue may be a result of the Computer Name being left empty:
    Open System Preferences and choose Sharing.
    Enter a name for your computer.
    Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

  • Cannot print wirelessly from MacBook to ENVY 5530 get message printer offline

    Cannot print wirelessly from MacBook to ENVY 5530, get error message that "printer is offline"
    Thanks for the help.

    Hey @Geneferg,
    Thanks for getting back to me regarding this issue. Because your printer shows connected on the Wireless Test Report, I am going to have you run some standard Mac troubleshooting steps to see if we can resolve this issue.
    Step 1: Uninstall Drivers and Software:
    First, it's important to have a nice clean slate to work with. Therefore, I am going to have you remove and uninstall the software and drivers for your HP Envy.
    To start, can I please have you click here and run through the steps on how to Reset the Print System for your computer. Please run through the steps on 'Resetting the printing system in Mac OS X v10.5.x or 10.6.x'. This will remove every printer from your computer. However, this does not uninstall the printers. Therefore, if you use other printers on your Mac computer simply ensure that the printer is connected through the USB Cable or network connected and (+) add the printer back in via the Print & Scan window. Do not add your HP Envy back in at this time.
    Next, please click here and follow through with the uninstall steps under the 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' dropdown.
    Once the uninstall is complete, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Please click here to download the latest drivers for your printer
    Once the website opens, select the Download button on the top left
    Once the download is complete, please follow any onscreen instructions to reinstall your wireless printer
    Once your printer has been successfully reinstalled please test the printing function again to verify if the 'offline' issue has been resolved.
    Please respond to this post with the result of your troubleshooting. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How can i print wirelessly from macbook pro to p1005

    Hi
    I've got macbook pro and I would like to print wirelessly from the mac to the printer laserjet p1005
    and I'm using a router has a usb port I concocted with printed vis the router but it doesn't print 
    the router is 
    TG587nv2
    from thomson 
    This question was solved.
    View Solution.

    Your router does not support printing through the USB port.  It only supports USB hard drives.
    I found the answer in the manual.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing Wirelessly from MacBook Pro

    Just got a MacBook Pro a few weeks ago. We have an HP PhotoSmart C7180 wireless printer, and I can't figure out how to "connect" the MacBook to the printer wirelessly. The MacBook recognizes the printer when I plug it in, and I connected the printer to my FIOS wireless network that I have. However, when I go to print wirelessly, I get a message saying my printer is off-line.
    I no longer use my AirPort Extreme Base Station because you don't need it with FIOS, which comes with its own wireless network. Any help would be much appreciated.

    Try deleting the printer from the Printers setting (the one that you set up when it's connected directly to your Mac). And then, add a new printer, it should find your printer in the network (if it's connected to the network properly). Add that printer and choose the correct driver.

  • Help printing wirelessly from MacBook Pro to Canon MP640?

    I can't print from my new MacBook Pro (running 10.9.1) to my Canon MP640. I installed the latest driver (10.84.2.0) correctly, I think, and the printer has WiFi connection and I can print via a PC on my wireless network, but MacBook doesn't see it. Any help would be appreciated. Thanks.

    Hi bannyx,
    I hate to hear you are having issues.  Does the printer have a valid IP address when connected via Ethernet or wirelessly?  Click Here for steps to take related to this issue. Please see the below information regarding the connection types for this printer.  Also I need a bit more information to proceed if the above link does not resolve the issue.
    Needed information:
    1.  Has the installation been completed from a disk or download?
    2.  Did the installation software detect the networked printer?
    2.  What is the IP of the printer when connected with Ethernet cable?
    3.  Are you able to access the embedded web server for the printer (type IP into address bar of web browser, does printer web page pull)?
    4.  Do you have security software running on the computer?
    5.  Is the router running in mixed mode?
    Connection information:
    1. Ethernet and wireless connectivity are exclusive.  If the device is hard wired with an Ethernet cable, wireless communication is voided (radio disabled) because the printer is networked with a cable. 
    2. Disconnecting the USB cable puts the driver in an offline state due to the fact it cannot communicate with the printer.  This is normal; it basically informs the user the device is not communicating. 
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • Cannot print wirelessly from MacBook Pro OSX Mavericks

    I cannot get my new MacBook Pro (using OSX Mavericks) to communicate with my HP Officejet4500 Wireless.  I can print when I use a connecting USB cable, but cannot print wirelessly.  All of my Mac software updates are current as of 4/20/2014, which included an update for HP printers.  When I used the disk to install the printer software, it did not have a screen for entering my wireless router ID or passcode.  In the Mac System Preferences for Print and Scan, my Officejet 4500 G510n-z is listed, but to no avail.  What do I have to do to get my Mac to print wirelessly?  Thanks.

    OK, thanks for that.  It may indeed may be the problem, but let's check a couple of things first.
    1. On the printer: Setup > Network > Print Network Test.  Is the printer connected to the network?  If it is not:
         a. In the Network menu, Restore Defaults
         b. In the same Network menu, run the Wireless Setup Wizard to connect the printer to your network.
    2. On your Mac, download and install this: http://support.apple.com/kb/DL907
         Restart your Mac.
    3. Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Canon MX860 get error 300 when printing wirelessly from MacBook Pro

    I've been printing wirelessly for several years and most recently after an upgrade to OS X 10.10.1 Yosemite it was printing fine until this morning. Something changed and I get error 300 when I try to print. If I connect my MacBook to the Canon MX860 printer using the USB cord it prints fine so I'm assuming it's some sort of wireless connection issue. I powered down and up both the printer and the Macbook and still get the error. I tried the "Reset Printer System" from the System Preferences and now I can't add the printer back in. I tried using the CD that came with the printer to reinstall the wireless connection and the set-up program says it's incompatible with my operating system and refuses to run. Any assistance to help me print wirelessly again would be very much appreciated. Thank you.

    After further investigation, we believe this is due to an intermittent  modem problem and is not the fault of the printer or MacBook.

  • HT4437 i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

    i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

    There are at least 3 versions:
    http://www.bowers-wilkins.co.uk/Support/Support/iPod_and_Computer_Speakers/Overv iew.html
    Original Zeppelin - I've had this for several years.
    http://bowersandwilkins.custhelp.com/app/home/p/6,26
    Zeppelin Mini.
    http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Mini/Overview.html
    Zeppelin with Airplay.
    http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Air/
    (I wouldn't regard the MM-1 as a Zeppelin but not sure if B&W call it that).
    I can't do much more to convince you!
    You could always update that wiki
    AC

  • How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

    How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help

  • How can i stream media wirelessly from macbook pro ? video...

    how can i stream media wirelessly from macbook pro mountain lion to dynex bluray player or insignia mhl tv? i also have a time capsule...

    most reliable method found is get an AppleTV hooked to TV, and get program called BEAMER (free trial or $15 purchase application).     Lots of programs CAN stream to TV via wifi, but many of them get audio syncing wrong/bad.   Best addition upgrade to any Apple PC or laptop isnt internal, but the AppleTV     BEAMER app is the best Apple/Mac app out there to me, ...  Ive got 7 Terabytes of Videos, ...the Beamer app takes in any video format, its just incredible.

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • Can "share this printer" on a MacBook pro allow my iDevices to print on a non AirPrint printer?

    I have an Epson USB printer CX7400 (does not have AirPrint) connected to an Apple Airport Express that is connected to an Apple Time Capsule wirelessly.
    I can print from my MacBook and other Ubuntu systems.
    But...
    I have iDevices (iPad etc) that I would like to print from to.
    I have a MacBook pro with the current operating system and updates and notice that I can share the printer on the network.
    I have seen posts (might be old?) where that was enough to print from and iPad or iPhone etc?
    Is that still true?
    THANK YOU for taking your time to write!
    NOTES:
    IPad Air, Macbook Pro mid 2012.
    I did not get the impression the Epson was supported with the Epson app but I could wrong.
    Message was edited by: VitalBodies

    Can "share this printer on a MacBook pro allow my iDevices to print on a non Airprint printer?
    No, but you might be able to print from the iOS devices but installing an App like Printopia on your Mac.  Printopia has a free trial, so you will know if it will work before you buy.
    More details here, if you are interested:
    Printopia - Ecamm Network

  • Best way to send files like photos wireless from Macbook to iPhone/Ipad? And Then vice versa?

    What are the ways to send files like photos wireless from Macbook to iPhone/Ipad? And Then vice versa?

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • Printing wireless via Macbook Pro but not via iPad

    I was able to install, print my HP Deskjet InkAdvantage 3515 from my Macbook Pro but when tried printing using my iPad, AirPrint printer not available.  How come? Did set-up wireless config in printer too.

    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

Maybe you are looking for