Want to Resize Images that are Exported as an Image Sequence

Recently started shooting HD. When I use "Image Sequence" to create a mass of video stills/frame grabs, the result is massive in size that takes up my whole monitor. I then use another program to shrink them down to 720 width and watermark them. I'm pretty sure I'm losing a lot of sharpness when I do this. I think if I could export directly from FCE at 720 it would look a lot better. Is there a way to export the "Image Sequence" in a size smaller than the original size of the video?
Failing that, anyone know a mac-compatible program that can do this with a 15 min video and make stills at 2 per second like FCE does, while resizing? Thank you!

Thanks Michel!
But does what u r saying apply to Final Cut Express, which is what I have? I watched a vid on nesting in FCP on a HowTo tube and it looked very easy. You just select the sequence and then go to Sequence>Nest & then it allows to to pick a video size. But that exact function doesnt exist in FCE.
According to a post on a diff forum an expert said "There is no nest items function in FCE". But there are some references to nesting in the FCE manual but it doesnt say how to change the size of the video in the sequence.
So is there any way to export an "Image Sequence" or even a "Still Image" in FCE in a size smaller than the source video? If there isn't it'd be almost silly.
Thanks to anyone who knows.
Message was edited by: fghsnnbcv bcvcg

Similar Messages

  • I have an iPhone 5c and want to play songs that are stored on my PC iTunes library, but were not bought through iTunes.  How do I do this?

    I have an iPhone 5c and want to play songs that are stored on my PC iTunes library, but were not bought through iTunes.  How do I do this?

    Hi there eramhar,
    It sounds like you are wanting to sync your music to your iPhone. If so, you may find the information in the article below helpful.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    -Griff W. 

  • I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated

    I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated

    Aperture is a nice program, I use it myself for it's adjustment and light editing capabiities.
    You can save a vault on another drive.

  • If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    If you want both iPad to be identical .....
    Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    Now connect your iPad to your Mac and start iTunes.
    When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
    After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
    Sync the iPad and eject it when it is complete.
    Quit iTunes
    Connect the second iPad.
    Launch iTunes
    Right click on the iPad name on the left side and select - Restore from Backup
    Select the backup of the first iPad and let it restore from that backup.
    When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
    Eject the iPad when you are done.
    Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

  • HT4847 i  want to recover photos that are on my iphone and ipod touch that have been stolen how do i go about doing so?

         i  want to recover photos that are on my iphone and ipod touch that have been stolen how do i go about doing so?

    If you still have the devices, import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your current device.  If they are only stored in backups, the only way to access them is to restore the device to the entire backup.  Note: you can only restore photos in an iPhone backup to another iPhone, and from an iPad backup to another iPad.  If the backups are on your computer, you may be able to extract the photos from the backup using 3rd party software such as iPhone Backup Extractor.

  • TS3694 i just want my itunes songs that are on my mac os x 10.5.8, also to be on my iphone like they were before i updated the phone

    i just want my itunes songs that are on my mac os x 10.5.8, also to be on my iphone like they were before i updated the phone?

    i already lost a bunch of songs and videos after the update. i don't knowwhat happened to them, or where they are?

  • Hi, i want to buy headphones that are compatible with my 3rd gen. shuffle

    hi, i want to buy headphones that are compatible with my 3rd gen. shuffle. can you please recommend which to purchase? It appears that you do not sell the older headphones style.

    This is a user to user forum. Apple is not here.
    for headphones, any 3.5mm headphones will work just fine.
    Apple sells the Earpods which should work just fine with a shuffle. And there are also other brands available.
    Make sure you choose the wired earphones.  Wireless ones will not work with a shuffle.
    http://store.apple.com/us/ipad/ipad-accessories/headphones#!

  • How to identify the files that are exported but still present in Oracle UCM

    Hello All,
    I am using Oracle UCM 11g on Windows OS.
    I want to know that if i have exported the contents from Oracle UCM to external file system, but keeping the contents and metadata into the Oracle UCM. How one will be able to identify that the contents that are being exported? Will there be any attribute set for any such contents indicating that these contents were exported?
    Your help or hint will help me out in resolving the problem.
    Thanks in Advance
    Dipesh

    Hi Srinath,
    Thanks for the reply.
    I did not find the place where to check this?
    On the content tab of the Repository Manager Applet, what is the column do i need to set for indication that the content is archived?
    Regards
    Dipesh

  • I don't want to have songs that are in my icloud show up on my phone but i still want them on my icloud is there anyway to do this?

    I don't like having songs that are just in my icloud on my iphone, I don't want to delete them from my icloud completely though in case I want to later add them to my computer on another device. Is there anyway to just prevent them from showing up on my iphone?

    Welcome to the Apple community Raver.
    Settings > music > show all music > off.

  • I want to create forms that are printable and not for web usage?

    I need to create forms that are for use in an office setting not only for web usage.  How do i do that?

    Hi,
    You may design a form in FormsCentral and then save the form as submission-enabled PDF form. Please check out this tutorial: Tutorial: Creating and distributing fillable PDF forms.
    Thanks,
    Wenlan

  • Organizing photos that are not in proper date sequence

    Is there an easy way to re-organize photos that are not in the proper date sequence? Do I eventually have to do each photo manually?
    Thanks

    You can drag them into the sequence you prefer in an Album (but not in an Event).
    You can correct the time using the Photos -> Adjust Date and Time Command
    Regards
    TD

  • Point me in the right direction: want to resize image & store in mysql db

    I finally accomplished one of my tasks! Which was trying to upload a jpeg image into my mysql database, and then display it in a jsp page via a servlet. I extend my thanks to the java forums greatly:)
    Now my next task I find is going to be trickier to accomplish, because I do not have enough experience working with images.
    I would like to make my first task above more efficient.
    When the user selects a jpeg file to send, I want to check the size of the image and resize it as well, before finally storing it in my Mysql database.
    I do not want to lose the resolution, nor do I want it to look distorted after it is resized. I want to keep the same proportions as the original image (I hope that proportion is the proper term). After the image is stored successfully, it will be read out of the database and displayed within a jsp page via a servlet.
    After poking around in the forums, I realized I need to get down the basics with regards to getting the properties of an image and trying to resize it. It doesn't look like it will be an easy task.
    Does anyone know of any sites that provide a good, easy to understand tutorial? Or are there any books you would recommend I read? What Java classes should I be looking into to accomplish my task?
    There are so many far more experienced programmers out there among the forums, that when I look at their code, I'm lost. I just want to understand this process better, by taking it one step at a time.
    Any help is appreciated, as always:)
    Thank You,
    Love2Java

    Load image with ImageIO
    Call getWidth() and getHeight()
    Create a BufferedImage with width and height scaled accordingly
    Get the image's Graphics2D object
    Call drawImage(), passing an AffineTransform to scale accordingly
    Output the image via ImageIO
    That should be it - you just need to read the APIs for the classes I've mentioned, and tack on whatever input/output streams you need at either end (see the java.io package).
    The only thing is:
    I do not want to lose the resolution
    Not totally sure what you mean: if you're scaling the image down to a thumbnail then by definition you're losing resolution. If you mean you want to keep the DPI resolution metadata in the image then you'll have to Google for it, the information is there but it hasn't remained in my head :o)
    But then I can't imagine why you'd need DPI metadata in a thumbnail anyway, so you can probably ignore it.

  • Dng files modified with lightroom 4 that are exported do not open in cs4 with the modifications

    When I modify and export dng files in lightroom these modifications do not show up in cs4 when I open the exported file.    They do if I export the file in jpg format.   

    Jim, I appreciate the feedback.   I believe the issue is as you stated- I need an update to the camera raw in cs4 in order to view the changes.   Unfortunately, I do not think is possible since adobe has decided not to support cs4 anymore.   My choices as far as I can tell are  1) read the lightroom file out as jpg which has the changes, 2) update to cs6 which probably has the correct camera raw version, or 3) do this cloud thing with adobe which is what they want you to do.    I like to print my photos in large format, 17X22 etc, and since my set up prints out nicely from cs4, and pretty much looks terrible from lightroom, I probably will just read out the jpg files and print them in cs4.   The reason I use lightroom is that it seems to correct highlights and such much more effectively than cs4.    Any thoughts would be welcomed.    mike

  • Hi I want all the issues that are related to FI , HR & BPS

    Hi friends,
    I want all the issues related to FI, HR & BPS(SEM)
    I will assign good points
    Thanks in advance,
    Ravi Alakuntla.

    Hi,
    Sine the records are posted to FI/CO, the records in CATSDB will be with the status '30' appropved. Now if you want to change the hours recorded, change the same, so that the status changes as 'Change after approval' and release the same and transfer it to FI/CO again.
    The records in the FI/CO interface tables will be overwritten.
    Thanks & Regards, Swapnil Mishra

  • I am working in my itunes and removing duplicates. When I go to delete a series of items then I press the shift button highlight and delete; when I want to delete several that are not in a series I go to use my "fn" button, it wont work

    I am working in my iTunes removing duplicates. When I want to remove a series of duplicates I hit the shift button on the key board, highlight and delete; when I want to select several to delete but are no in a series in the past I would hit the 'fn' button then highlight and delete. That button does not seem to be working at all. Any insight would be appreciated. Thx

    Command-click does the trick.

Maybe you are looking for