Want to see ALL issues and risks, not just mine. Is this possible?

I'm relatively new to Project Online, but I have four projects in it with associated risks and issues.  It looks like I can only see risks and issues that are assigned to me, which is fine for now, but as these projects get further down the line (or
as I add more projects), I'm going to want to assign issues and risks to other people and as head of our nascent PMO, I'm still going to want to see ALL of the issues and risks from Project Online (I am trying to manage the portfolio, after all).   Is
there a setting somewhere I missed that would allow this, or am I stuck with just being able to see my own?

Hi Cuttyson--
If you do need to consolidate risks and issues among a portfolio then you'd fall into report's creation with odata technology.
Paul's (a fellow MVP) has posted a while ago a tremendous
report pack which can be applied to Project Online with specific reports for risks and issues.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

  • I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !

    Thanks !
    Kudos always welcome for helpful posts

    Re: I have a VI A. I want A to call another VI B and execute. After B executes, I want it to close automatically and go back to A. Is this possible ? I tried using open reference and those methods, but I am not able to do it. Can someone help me ? Thanks !Hi Stephan ! Thanks ! I guess I explained my question not so right. I've created a customized menu and at the instance of me selecting a menu, a VI should load itself dynamically. I am using call by reference. Sometimes it works and sometimes it won't. In short, what I want to achieve is load VIs dynamically and close them dynamically once they finish executing. Thanks !
    Kudos always welcome for helpful posts

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • HT201274 iPhone 4s, but wifi option is greyed out. I want to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, bought a iPhone 5c. how do I erase all on my 4s with no in

    I have an iPhone 4s, but wifi the option is greyed out. The wifi stopped working on it months ago. Now I wanted to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, since I bought a new iPhone 5c. I can't erase my phone by pluggin it into my Macbook Pro, since I can't disable the "Find my iPhone" App without internet. How do I erase all the data and setting on my 4s without connecting to the internet? It is running ios 7

    See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
    I just did it. To enter DFU mode, I had to use "method 3" on this post
    http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
    Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone.

  • I have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

    have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT204053 hi , i want to see all my photos and other throo the icloud in the computer how i can do it ?

    hi , i want to see all my photos and other throo the icloud in the computer how i can do it ?

    Well, the obvious advice is to restore your mac's backup to the new drive - I assume you've been using Time Machine.
    If you haven't been backing up the mac, then ...
    For photos, sync the iphone to the mac vis iTunes/USB and get the photos back into iPhone on the mac.  Getting back the itunes is another problem.  You can look for mac apps that read an iOS device and copy songs to the mac.  But that won't get back all the other information that iTunes used to have.  Again, only a backup would restore all that data.  As for purchased items from the iTunes store, use the mac and connect to the store via itunes and check the purchased tab or link.  There you can redownload all purchased music and other items.

  • Mobile Version: How to see all highlights and notes we made in a PDF document?

    Mobile Version (Android): How to see all highlights and notes we made in a PDF document?

    I'm moving your topic to the Android forum.

  • Users unable to see Issues and Risk assigned to them in PWA 2013

    User unable to see Issues and Risk assigned to them in PWA 2013 site

    Hi,
    I think this a duplicate of you other thread
    Paul

  • The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    Mail/Preferences/Composing. Do you have the CC myself box checked?

  • Too many errors. I want to see all of them in MS-DOS.

    I am wondering why no one ever wants to see all their errors when compiling programs. Several times I have looked for someone who is in the same boat as I am. I can't seem to find any hints or solutions to this problem.
    I know that when compiling code in c or c++ you can redirect any output/errors to a file in UNIX and I think MS-DOS as well. When compiling Java code you can use the script command in UNIX to solve the issue of errors scrolling off the screen, but in MS-DOS, I know no other solution than getting an Integrated Development Environment (IDE) like VIDE.
    Can anyone help me with this problem. Thank you.

    2> works on WindowsXP and I am pretty sure it will work on NT. I am pretty sure it will NOT work on Windows 98. javac used to have a -Xstdout option that would do the trick, but it was removed in 1.3. I tried using -Xstdout using 1.4 and it erased my source code - not the file just the code - so I would be careful. You might try searching the various forums here for 'redirect'

  • I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I

    I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.

    Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    However... Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Jessica Sanchez wrote:
    I am installing itunes to a laptop and have not sync device to this lap. ...
    Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

  • I have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    i have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    I do not recommend reformatting your harddrive and reloading your software.  This is a Windows thing. On an older mac it may be difficult to find all your software again.
    Best to have greater than 2gig of free space.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (3)
    Buy an external firewire harddrive.
    For a PPC computer, I recommend a firewire drive.
    Has everything interface:
    FireWire 800/400 + USB2, + eSATA 'Quad Interface'
    save a little money interface:
    FireWire 400 + USB 2.0
    This web page lists both external harddrive types. You may need to scroll to the right to see both.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    (4)
    Buy a flash card.

  • Since the iOS 7 update on my iPhone 4S the pictures I take are all blurred and it's not just mine I know of at least 10 of my friends having same trouble ???

    Since the iOS 7 update on my iPhone 4S the pictures I take are all blurred and it's not just mine I know of at least 10 of my friends having same trouble does anybody know why or is anybody else having the same trouble ????

    See if this helps you with the wifi issue. http://support.apple.com/kb/TS1559

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My iCloud on my phone is undJer another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

    My iCloud on my phone is under another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

    You have to delete the iCloud account but you can keep all your data such as Contacts, Calendars etc. when you delete the account you will prompted to "Keep on my iPhone".
    All your purchased content (like apps and music from iTunes Store) belongs to the original ID and you have to re-Purchase them under your Apple ID.
    Photos in Camera Roll remains in Camera Roll.
    Photos in photo stream that are not in Camera Roll must be saved in Camera Roll.
    Photo that previously synced from iTunes remains in photo library until you synced with another iTunes library (another computer).
    Also sign out from iMessages, FaceTime and Home sharing (Settings>Music)

Maybe you are looking for

  • IPod won't display in iTunes

    Recently I started having problems with my iPod skipping songs - it would show the song, but skip right over it to the next song when I tried to play it. This didn't happen with all songs, but quite a few of them. I used the restore in iTunes to rest

  • Seeburger AS2 Adapter

    Hi, I need few information how to implement seeburger adapter(Using AS2 or FTP) with XI. I have a requirement to convert the EDI Ansi X12 messages from a EDI system and post it into a R/3 system using XI. The client system(EDI system) is in US has VA

  • Installing Final Cut Express

    Here's the deal, a friend installed Final Cut Express onto my iMac for a short time for me to test the application. I liked it a lot on decided to buy it. Here's the problem, after I deleted the old Final Cut Express (registered under my friends name

  • Reverse event bubbling/dropping

    Hi! I use custom components to organize my application. Event bubbling from a nested component to the application works fine. Is it also possible to notify any component tested in the application with an event triggered by the appplication or another

  • Migration Of Non-ASM 11g Database To ASM

    Hi Team, I have an instance with a standby database and Primary instance has been converted to Non-ASM to ASM(File System). Currently i have online redolog files and standby logfiles in my primary instance and i need to recreate log files in ASM. Do