Want to start PSE 12 in photo editor but it will only start in Orgaizer, can't get to welcome screen and the .exe file that Adobe said to look for does not exist on my files

Have tried to start PSE 12 in photo editor but it continues to start in Organizer.  I do not want my pictures loaded in Organizer at all.  Saw a page on the web that said to click on an .exe editor file but that is not on my files.  Also cannot get a welcome screen to come up, only an organizer even though I checked it the first time to come up in photo editor.  I'm now having Organizer crammed down my throat.  Tried online chat but was cut off with the statement that no support is offered for v12 any longer.

Hi,
You failed to say which operating system you are running on so I'm assuming it is Windows of some type.
You should be able to find the following files, using explorer, depending on your system.
64bit system: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
32bit system: "C:\Program Files\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Double clicking on that should start the editor - suggest to create a shortcut to it.
If you can't find one of those files, then you either installed it somewhere else or you need to re-install elements.
Brian

Similar Messages

  • While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

    While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

    the screen shot does not display (a Forum bug ) and if it did it does not answer the questions
    Seriously we can not see you and if you refuse to answer simple questions we can not help
    Need information to help
    what version of iPhoto? Is OS X 10.8 as you state correct for the OS? Has it ever worked? What has changed since it worked? Will Image Capture  ( in your applications folder) import the photos? How are you importing - USB to the camera? USB card reader? built in card reader?
    Any other clues that would help a total stranger who can not see you or your computer assist you?
    LN

  • No synch choice in safari. So how do I synch my bookmarks in safari to firefox when the synch icon firefox says you have to use does not exist in safari.

    no synch choice in safari. So how do I synch my bookmarks in safari to firefox when the synch icon firefox says you have to use does not exist in safari?
    I cannot set up synch with bookmarks in safari since there is no synch icon in preferences in safari.

    This is crazy. The directions on firefox keep telling you to go to links that do not exist to import bookmarks from safari.
    For example, it says;
    Firefox imports Safari settings automatically. Just go to File > Import... and select Safari. In the next window, check the boxes of what you want to import. For example, your Safari Bookmarks will appear in Firefox's Bookmarks menu as "From Safari." Whatever other bookmarks you had on your Safari Bookmarks Bar will automatically appear on your Firefox Bookmarks Bar, too.
    BUT THERE IS NO IMPORT LINK UNDER FILES ON FIREFOX!
    Then I tried to add a device. I got the code but the continue link was not on ever. I tried it over and over and it does not work.
    WHO MAKES THIS SYSTEM??? How can something that should be so simple be so impossible, and why does Firefox direct you to links that do not exist or, if they exist, do not work!
    Thanks,
    Mike Ruggeri

  • Type (..) of the context element (..) in view (..) does not exist

    Hi all
    I have got an question. I have an ABAP webdynpro with a context node which is connected to an ABAP structure.
    The context node is mapped to a context node of a view and the fields of the view are mapped to the context node of the view. So the data is send through them. That works fine.
    Within this ABAP structure i have added 3 extra new fields. After creating them i activated the structure.
    Within the webdynpro i have updated the context mapping between the node and the structure and also between the different mappings between the views and the componentcontroller where this node is used,
    Within the context tab of all the views i see all the three new fields.
    When i try to map those fields to a field in the screen it cannot be done. i get the following message:
    Type (..) of the context element (..) in view (..) does not exist
    Anf the new fields are gray.
    Does anybody know the solution for this?
    kind regards,
    Anton Pierhagen

    Hi all
    Thanks for all of the replies. But unfortunately the right answer wasn't there.
    I had tried to map the structure and re-create the node on several levels in my web-dynpro, but there was no change after this changes.
    When i created an own dataelement and an own domain in my ABAP structure, it worked.
    I could select them in the webdynpro. But why????
    i still not get it..
    But thanks for the replies!
    Kind regards,
    Anton Pierhagen

  • I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    1, iOS only works on iPhone, iPads or iPods. These drives were probably made with an operating system that preceeded OS X such as OS 7, OS 8 or OS9.
    2, No, the data on the Zip Drives is formatted for the Mac.
    3, If your reformat them then all of the data is wiped
    4, The problem would be that the PC can not read the files as formatted on the zip drive by the Mac
    5, There are services that might be able to migrate the data for you but I seriously doubt that Staples or Office Max can do it for you. The services that migrate data charge big bucks so be prepared to pay for it.
    Allan

  • I moved iTunes folder location, now all my personal song ratings and playlists are gone.  How can I get them back?  All the iTunes files are intact, just in a new location.  Running iTunes 11.1.5.5

    I moved iTunes folder location, now all my personal song ratings and playlists are gone.  How can I get them back?  All the iTunes files are intact, just in a new location.  Running iTunes 11.1.5.5 on Windows 7

    Put everything back the way it was.
    Them move the folder correctly.
    http://support.apple.com/kb/ht1364

  • TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar.  Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar.  Does anyone have a "fix" to correct the "time

    The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar.   My i4S is in the correct New York time zone.  Help?

    I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work.  So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

  • My iMac Version 10.6.8 has problems starting up. I often get a white screen without the apple icon.

    My iMac Version 10.6.8 has problems starting up. I often get a white screen without the apple icon. Then I must turn the computer off and restart. Restarting will usually bring up the Apple icon and the start screen. What could be causing this? And how can I resolve this issue. My Mac is still under warranty, I've had it just 7 months.

    Reset the NVRAM/PRAM and Reset the SMC.

  • My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on

    My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.

    Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
    Try Recovery Mode... http://support.apple.com/kb/HT1808

  • I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    View your landscape photo with your phone in the upright position.
    Tap on the photo once so the background goes black
    Take a screenshot now by pressing the round button and the top button together.
    Go back into your photos and find this new screenshot - then apply this as your wallpaper. You should be able to resize it :)

  • I'm finding Ios7 exceeding frustrating having to spend hours reinstalling and looking for last data. For example I cannot delete photos I have synced, applications are missing. Where can I get clear instructions to fix the mess?

    Where can I get clear instructions to clean up a mess that Ios7 has made of my data and info on my iPad. I can't delete photos, apps are missing, it's crazy and so frustrating. I have spent hours on this.

    How did the photos get onto your iPad ? If they were synced from a computer then they can't be deleted directly in the iPad's Photos app - instead they are deleted by not including them in your next photo sync from your computer's iTunes.
    For your apps, as long as they are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app on your iPad, and via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes. If you had backed up to your computer's iTunes before starting the update then you could redownload them to your computer's iTunes and then retry restoring to your backup and see if that copies the apps and their content back (the actual apps aren't included in a backup, just their content/settings, so for a restore to work fully you need to have the relevant apps in the Apps part of your library).

  • How do I upgrade Adobe reader - currentlyevery time I try to download a PDf file on my macpro I get a grey screen  and a dialog box that says adobe reader is blocked for this website...

    Help - a couple of weeks ago I tried up upgrade adobe reader but it never completed loading as far as I can find / that night would never finish
    ( how would I know , where would I check?)
    now every time I need to download a PDF file ( dental claim forms tonight) I get a grey screen with a dialog box that says Adobe reader blocked for this site
    and that happens on any site where I am trying to download a PDF…?

    What is your operating system?  Reader version?  Downloading from what browser?

  • When I open a document in Adobe XI Pro Windows 8.1 I get a white screen and the document does not appear to open, Adobe is 'not responding'

    I purchased a computer with Windows 8 and installed the 8.1 upgrade. I installed Adobe Acrobat XI Pro and have had error messages about specific fonts not being present but the document opens just fine. Other times (about half the time) the document will not open or opens as a blank screen, and eventually Adobe Not Responding appears, with the usual choices to close or look for a solution. If I look for a solution it tells me that no solution was found. I have not found any information online about this problem. I have used Adobe Pro in previous versions in a Windows 7 and Windows XP environment and not had any problems.  Is there a simple solution to this? I have uninstalled and reinstalled Adobe, and still no luck.

    Hi nausm,
    Is this issue specific to the pdf files or do you face the issue with any pdf you try to open?
    Which application was used to create these pdfs?
    Have you updated Acrobat to v11.0.7 and checked?
    Are you able to launch Acrobat standalone app without clicking on any pdfs?
    You are getting error related to specific fonts because the document might have the fonts that are not available on your computer.
    Regards,
    Rave

  • How can I get itunes to change and update mp3 files?

    Hello
    basily what im asking is. i have a itunes libery with all the right artist names and all the alubem covers i got from internet and sorted into playlist. Is there a way i can get itunes to change the actual mp3 files so that it has the right artist names and arwork after editing it on the libery. as atm all the mp3 files are have missing iformation and when i send a file to my mp3 player it does not have track names or artwork? i tried doing the concert ID3 tag but did not seem to make a difference and after ive done get info and edited it. it does not seem to change the mp3 files.
    can anyone help?

    Flip4Mac should be able to do that
    http://windows.microsoft.com/en-us/windows/windows-media-components-quicktime

  • I'm having problems starting up... Apple logo gray screen and the thinking wheel.

    Help!! please.. I like making YouTube videos... And I need this to work.

    Hello Dana,
    Please report back what does & doesn't work...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Does it boot into any of these modes?
    Holding Option/alt key at bootup.
    Holding SHIFT key at bootup.
    Target mode...
    http://support.apple.com/kb/HT1661
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492

Maybe you are looking for