WARNING: Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL.

WARNING: HP has falsely advertised their dv6 and dv7 line. Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL and various other software. OpenGL games, Adobe CS Suit, and Design programs such as CAD or MatLab are incompatible with this laptop!

According to this post the 6670m does fully support open GL 4.1
http://forum.notebookreview.com/hp-pavilion-notebooks/583203-dv6t-7-switchable-graphics-76.html#post...
And AMD says it does also
http://www.amd.com/us/products/notebook/graphics/amd-radeon-6000m/amd-radeon-6700m-6600m/Pages/amd-r...

Similar Messages

  • Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    I have an IMAC 10.6.8
    Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    If you have iWeb V 3 you need to go to the Site Publishing Settings page...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

    How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

    Another option if you have access to a second Mac with a drive is to connect the two together with the iMac in Target Disk Mode,  Transferring files between two computers using FireWire, and installing from the Mac with the optical drive.
    OT

  • Pan and Zoom-I get a warning that my system does not support OpenGL

    I'm using PSE 8 on a Windows 7 64 bit system.  Whenever I view my photos in full screen mode and try to change the transitions to pan and zoom, I get a warning that my system does not support OpenGL.  I have an ATI Radeon HD 5770, updated to the latest driver, and I believe that does support OpenGL.  If I ignore the warning and select pan and zoom anyway, the slideshow cycles through hyper fast then locks up.
    Any idea what is going on?
    Thanks.

    If you're referring to streaming via itv.com, the minimum system requirements can be found here.

  • The cooling fan comes on just after switching on and does not switch off any ideas

    The cooling fan on my iMac comes on just after switching on and does not go off any ideas please?

    Do a smc and pram reset,  See if those fix it.

  • Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

  • How do I get back to FireFox 5. The 7 version will not work with the college's MIS - which does not support version 7, which was downloaded automatically.

    The Angel management system used for classes does not support version 7. That's huge.

    Old versions of firefox 4,5 & 6 are no longer supported or considered secure. You put your system and your personal data at risk if you use them. Further more if you download from third party sites you face other potential risks or inconveniences.
    The recommended official solution is to use Firefox 3.6 which is still supported, and will be 3.6.23, which will upgrade soon to 3.6.24
    Another alternative is to use the current secure firefox for all day to day work, and use a separate firefox portable for the problem school site. With luck a firefox portable version will be available with firefox 3.6.23 which is currently the supported version. http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

    Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
    All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'.   I have tried the '335' code on both of the TV's and no worky at all. 
    Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
    I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs.  So far, so good.
    Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......."   This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
    Now, onto Step 6: "Test that the remote control is programmed for your TV".....  can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
    Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
     I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

    Robertop,
    have you tried the following? The info below  is found here
    Turn on your TV and the FiOS TV Set-Top Box.
    Make sure you can see live TV.
    Press and hold the OK and FiOS TV buttons together then release both buttons.
    The red LED light blinks 2 times and then stays on.
    Press and hold the Play button.
    The remote control tries a new TV code every second.
    The red LED light blinks each time a new code is sent.
    When the TV turns off, release the Play button immediately.
    NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
    Test your remote to ensure it is working properly:
    - Turn on the TV by pressing the TV button on your FiOS TV remote.
    - Press the Vol+ and Vol- buttons to ensure that you can control the volume.
    - Press the Mute and A/V buttons to ensure they work.
    If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
    If all the buttons work, press OK to this TV remote code.
    The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

  • Problem with ichat, error message says computer does not support video chat

    I have never had a problem with Ichat until yesterday...now apparently I don't have the video capability.  I am running 10.7.2.  I turned off Facetime.  I now have the video camera image but it won't let me video chat.  Any ideas?

    Hi,
    In iChat open the Connection Doctor (Video menu) and the the Capabilities option
    Are all items showing Green ?
    Try restarting iChat (It re-reads the computers Ability at each launch)
    If that does not work try restarting the Computer.
    Make sure that in iChat menu > Preference > Video Section the Bandwidth Limit is not set to 100kbps (this is too Low for 1-1 video chats)
    Do a Speed test
    "Real World" speeds need at least 256kbps both up and down.
    Check the System Profiler is "seeing" the camera.
    It will be in Hardware > USB
    10:30 PM      Tuesday; March 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Does Best Buy sell any Camcorders that come with wireless remotes?

    Hello,
    I have a Sony digital tape camcorder that I am looking to upgrade from, to a flash or hard drive camcorder. It has a wireless remote and I need that feature on any new camcorder I purchase. However, the product descriptions fail to mention whether or not a camcorder has a wireless remote.
    So, which flash or hard drive camcorders sold at Best Buy have either (a) a wireless remote, or (b) the ability to be controlled by a universal wireless remote?
    Thanks in advance for any information, as it will help determine if I should purchase a camcorder from Best Buy.

    Hi jollystomper,
    It seems like there was a time not too many years ago when every camcorder on the market had a wireless remote.  Manufacturers found that they were not widely used, however, and quit making those remotes standard.  
    I did a quick search for you, and the only camcorder I found with a remote in the box is the Toshiba Camileo X416.
    Check it out below.
    Toshiba - Camileo X416 16GB HD Flash Memory Camcorder - Black
    Model: PA3974U1C8K | SKU: 3530538
    This camcorder features electronic image stabilization for enhanced clarity and records 1080p HD video to bring images to life. The 3" LCD touch-screen display swivels for an optimal view and allows easy editing.
      Read reviews (0)
    Sale: $234.98
    Thanks,
    Mike|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Is there any games that comes with the computer?

    i need car race on the computer and i do not want to buy them

    No, you don't get car race games on your computer, you will have to buy, rent, or bum off ur friends, sorry.

  • My new earpods that came with my new iPod Touch 5 does not plug in?

    My NEW earpods do not plug in all the way! There is static when I plug it in! It won't let menplug it in all the way no matter how hard I pushed. When I plug it in (as far as it goes) all I hear is static! And then it stops. But sometimes it works but then the sound starts to go out from the speakers.

    Definitely sounds like a hardware problem, probably with the jack.  Set up an appontment at the the Genius bar of the Apple Store.

  • How do I get rid of the popup that says the safari version I am using does not support the community toolbar?

    Please Help

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • What are the limitations in weblogic that comes with JDeveloper?

    Hi,
    What are the limitations in weblogic that comes with JDeveloper?
    Thanks for your help.

    Not much. If there is, you can always create your own domain with the servers you want and create a connnection to the admin server of that domain in JDeveloper.

Maybe you are looking for