Warning message box pops up when opening Flash CC in Flash CS6

See attached image.
Is there a way to get rip off the message? I had turn off all warning box under Preferences > Warnings, it still poping up!
Thx.

If any Flash CC file is opened Flash CS6, a warning message would appear. Unfortunately, there's no way to disable this alert unless you re-save your file in Flash CS6 once.

Similar Messages

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • How to keep OI window in background with message box/pop up boxes on top.

    Hi
    I have a new requirement to add in OI .How to keep OI main window fixed in the background with message pop ups atop OI window.
    Even  with message box pop ups , i should not have the access to OI main window.To  make it more clear,when i change to some other application in my PC task bar (for eg:-MSWord) and then click back to OI main window ,i should see the message box on the top of OI main window . I should not  have the access to click OI main window and OI message box as two separate operation in the task bar.
    Please let me know where i need to make changes in my OI  codeset.
    Regards,
    Nand

    Hi Nand,
    In the Message Popup step settings, check Make Modal under Layout >> Dialog Options.  
    I hope this helps.
    Cheers,
    David Goldberg
    National Instruments
    Software R&D

  • How to make a message box pop up?

    On my website I want when someone clicks a hyper link a message box appears instead of going to the page.
    so I could have a SECRET page and then when they click it a message box pops up saying "Sorry this page is secret" or something like that.

    You can use fancyzoom or image popup methods (using an image file with the text in it). This demo page has an example: Fancy Zoom & Image Popup.
    Or you could use rollover methods like in this demo page: Mouse Rollover & Animated Gifs
    Still another possibility is the show/hide text method: Show and Hide.
    OT

  • Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud.  For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to

    Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud.  For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to open Photoshop unless I sign up/pay.  I'm quite confused?  I really NEED to have access to Photoshop ASAP.

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Warning message in pop up

    Hi,
    I have a requirement where i have to get a warning message in pop up,
    Please suggest me, if anyone knows any function modules, Pl let me know
    Thanks & Regards,
    Kirthi

    Use your message as "I" it will be poped-up..
    Ex: MESSAGE I001....
    OR
    Use FM 'POPUP_FOR_INFORMATION' OR  'POPUP_TO_CONFIRM'
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

    Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop.  (Same CS5 and plug-ins installed OK several years ago on a Vista laptop.  Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install.  Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."   Any solution?

    CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
    So this means you will have make a list of the updates that failed, go here: Product updates
    and manually download/install from there.
    Gene

  • I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

    I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
    And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
    Please help  

    Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

  • I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

    I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

    fyfesa1970 wrote:
    Ask a simple question and get a simple answer...see below...hilarious:
    All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
    We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
    The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
    If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
    Good luck.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • File Download Pop up when viewing flash site

    I created a website with flash and everytime I look at it on
    my computer is views ok. When I look at it on another computer it
    goes to the website but when I try to click on the lnk to go to the
    next page, I get a pop up message thats prompts me to open or
    download. Wehn I click to open it say website not found...
    Someone please help. This is what it says:
    File Download_Security Warning
    Name: gallery
    Type: Shockwave object, 3.62MB
    From:www.photographybykimledoux.com
    Here is the website..
    www.photographybykimledoux.com

    As you probably guess I dont use IE.
    When I searched for it on my computer, it did not come up, so I went to the MS download center and downloaded the Internet explorer for Windows 7 x64. Ran the installer but before it could finish, it gave my this error:
    The link set me to this  site,  my responces the things on the site are as follows:
    I am running Win7 with Sp1,
    I have run Windows Update to the latest updates,
    I meet the specifications for IE11
    I am not running an incompattable video card
    All updates are complete
    I am running a x64 computer and have the x64 installer
    I do not have any previous versions of IE on the computer
    It looks as though the computer did not come with IE or it has been uninstalled at some point by a user. The installer is not giving any clues to what made it stop , so I am afraid that I can give you no more inforamtion about that.
    The only other thing is the point about the .dll file problems. I think that there may be a serious problem with the computer regarding the .dll files as many of them seem to be broken/ corrupt... I can see no solution to that apart from maybe copy-pasting the broken ones over from my other computer that is working, might that work?
    Thanks!

  • Warning message on log off when application is running

    How can I make a warning message when a user is trying to logoff windows while an application made with labview is still running ?
    I want to pop something that ask the user if he's sure he wants to quit.
    thanks

    I was working on just this issue today. Here is a vi (in 7.1.1) and an exe showing it. The exe has been renamed to a .llb to get around some attachment restrictions, so rename it (after scanning with you antivirus of choice!).  I can make it in 8.0 if needed (don't currently have 8.2 installed)
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion
    Attachments:
    shutdown.vi ‏31 KB
    shutdown.llb ‏62 KB

  • Error message boxes on duplicate drag in Flash CS5.5

    Hi I wanted to report a problem I've been having with Flash CS5.5 on MacOS 10.5.8
    When I drag an element (usually a line or shape) with the alt key pressed (in order to create a duplicate on the stage) sometimes I get a couple of message boxes appear that say "Panel x could not be created removing it from the list" where x is a number like 7 or 9. After I click through these the swatches panel appears in the middle of the screen.
    This is quite annoying and holds me up as I have to click through these boxes & then close the swatches panel.
    Hope you're able to address this error in future builds.
    Cheers
    -Tom

    These are primarily user to user forums.  USe the following if you have a bug to report:
    Adobe - Wishlist & Bug Report
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • System wide modal message box pop-up from applet

    Hi,
    I am having an applet which is listening on a soket and has to pop-up a message box with the received data as and when it receives it.
    I have used JOptionPane.showMessageDialog() for this.
    Now, the requirement is the MsgBox should come up even if the user is working on another console/window. Btw, I am running the applet on windows-XP/2000 with JRE1.4.2. I have used null as the first parameter to the showMessageDialog function above, but its not popping up if I am workin in some other window.
    Anybody having ideas on how to do it, please reply.
    Thanks
    Sujit

    Pop up a Frame or JFrame showing the message. You can make it passably modal by having the applet nap while it's visible:
    JFrame msg = new JFrame( "Got Data!" );
    ...// add message
    msg.setVisible( true );
    // may not pop up instantly:
    while ( !msg.isVisible() ) pause( 10 );
    while ( msg.isVisible() ) pause( 50 ); // wait for user to close
    private static void pause( int millis ) {
       try { Thread.sleep( millis ); }
       catch ( InterruptedException e ) {}
    }

  • Comment enabled pdf's, showing pop-up when opening in acrobat professional.

    Hi all,
    We are sending the comment enabled pdf's to authors for review.
    Some of the authors stating that its showing an pop-up when they open the PDF's:
    We opened the same document in Acrobat 6,7,8 & 9. Professional and Reader. We did't get the above said message.
    Are the authors using the outdated version of acrobat which was not compitable for "comment enable".
    Please suggest.
    Shaji

    HI all,
    I did't get any help related to this issue.
    Can anyone respond.
    Shaji

Maybe you are looking for