Warnings when running disk utility after downloads, etc.
I use Mc Janitor nightly to clear some of the 'stuff" that accumulates with files, etc. but run Disk Utility after downloads and such about once a month. I have done this since 2003 when I had my first e-mac. Only recently have "warnings " appear on the list of repair or varify disk...that says certain items can not be repaired. The techs at the Apple store said to just ignore them, which I have been doing. But the last download, which was a rather large new Security download, came up with something new, both on my computer and my husband's lap top when he downloaded it. These are letters that appear and say ACL found but not expected on Applications/Utilities, on "Applications" and on "Library."
We are just curious about what ACL is (or are) and what it means to have them in our systems.
It does say that the disk is verified when I run that. Everything seems to be working normally.
A few posts below yours is this one:
http://discussions.apple.com/thread.jspa?threadID=2310982&tstart=0
New Permissions messages after Security Update/more curious than concerned
Similar Messages
-
I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?
Which disk won't mount? What version of OS X? Your post is impossible to answer with no useful information.
-
URGENT!!!!- INTEL MAC "INVALID SIBLING DISK" error when run disk utility
I am very upset, I ran my verify disk permissions, everything fine, repair disk permissions, everything fine, do t periodically just to mae sure all my stuff is in order,,,, then I decided to run te VERIFY DISK, because do not do it as much and want to mae sure my macbook pro is running fine, and I get:
Verifying volume “minimal minimal”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid sibling link
The volume minimal minimal needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
!!!!!!!!!!!!!!! ***?!!!!!!!!!!!!!!!!! there is no way of repairing the disk, and when I search for possible solutons it says I need to run it from the original osx installer disk, and even when it does not necessarily repir this error. besides the fact that the original cd is in atlanta and I am currently in barcelona, some say that I would need to reformat my drive and either way this might not solve the problem. I HAVE WAY TOO MUCH IMPORTANT INFORMATION on my macbook pro to reformat, and i do not have the money to buy an external hardrive, I A VERY UPSET, A BRAND NEW COMPUTER, LESS THAN TWO MONTHS OLD, AND ALREADY I HAVE THESE KIND OF PROBLEMS WITH IT, WHERE IS MY SUPPORT?! please tell me, what do i do? I expect a decent, viable slution to the problem. I need my computer ad the information in it, I work from it and also use it to produce music. why would I have this kind of problem, when I search for answers, everything relates to external hardrives, ..... this is my internal hard drive that I am talking about--- WHAT DO I DO?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!The available Apple centers in Spain are:
ADEMAC
C Castelló, 109
28006 Madrid
Tel 91 562 11 00
BANANA COMPUTER
C Leon and Castillo, 88
The 35004 Palms of Great Canary
Tel: 928 24 28 28
Fax: 928 24 82 31
BANANA COMPUTER
General boulevard Franco, 141
38001. - Santa Cruz de Tenerife
Tlf.: 922882126
Fax.: 922206782
BENOTAC
C Doctor Castelo, 35
28009 Madrid
Tel 91 308 43 63
BENOTAC
C Babel Nº1, the Premises
29006 Malaga
Tel: 952 04 09 55
Fax: 952 04 13 58
BILBOMICRO
Stolen c of Amezaga, nº 7 low
48008 Bilbao (Biscay)
Tel 94 423 02 13
BILBOMICRO
C Abendaño, 52
01008 Vitoria
Tel 945 28 41 33
BUS Solutions
C Cabrales, 100
33201 Gijón - Asturias
Tel: 985 35 90 85
CTA Serveis
C Consell de Cent, 382
08009 Barcelona
Tel 93 24 40 350
GOLDENMAC
C Bolt, 48
29007 Malaga
Tel 952 42 97 12
GOLDENMAC
Avda. White Carrero, 2
41011 Seville
Tel 95 427 12 13
K-TUIN
C Luis You live 8
50006 Zaragoza
Tel 976 56 72 27
K-TUIN
C Hernandez Lazaro 14
46015 Valencia
Tel 96 385 36 74
K-TUIN
C Muntaner 537 - 541
08022 Barcelona
Tel 93 418 02 03
K-TUIN
C Orense, 52
28020 Madrid
Tel 91 55 56 798
K-TUIN
C Aureliano Valle, 4
48010 Bilbao
Tel 94 410 07 77
Microgestio, LIMITED LIABILITY COMPANY.
C Valencia, 87-89
08029 Barcelona
Tel 93 454 63 63
Rossellimac.
C Painter Lopez Mosque, 12
18002 Granada
Tel 95 829 13 24
SICOS
Pza of Good Shepherd 6
20005 San Sebastián (Guipuzcoa)
Tel 94 344 12 79
Valles Tecnologic, S.A.
Plza. Of the Unio, 3 the Premises 1º
08190 Sant Cugat of Valleys (Barcelona)
Tel 93 590 80 60
Perhaps, since you are under warranty, they may have a boot disk to attempt to run disk utility and see if the problem can be repaired before resorting to reformatting. Disk error may occur because of a number of issues (installed software, crashes, shutdowns, physical movement of the drive while disks spinning, etc.)
In addition you may want to boot in the single user mode to access the FSCK command as follows: The following is from the Apple support site
Mac OS X: How to Start up in Single-User or Verbose Mode
You may use a key combination when starting up the computer to enter single-user mode or verbose mode, either of which can be used for troubleshooting and in software development. This document applies to Mac OS X and Mac OS X Server versions 10.0 and later.
Steps to Enter Single-User or Verbose Mode
1. Shut down the computer if it is on.
2. Press the power button to start the computer.
3. Immediately press and hold the Command (Apple) key and one of the following:
the "s" key for single-user mode.
the "v" key for verbose mode.
4. To exit single-user mode type: reboot
5. Press Return.
You have successfully entered single-user or verbose mode when you see white text appear on the screen.
Then you may try to repair as follows using the FSCK
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. However, here are some situations in which fsck may be necessary.
Your Mac OS X disc isn't available.
Your optical drive isn't available.
You can't start with a Safe Boot.
Tip: If you use a Mac OS X Extended (Journaled) formatted volume, such as with Mac OS X 10.3 or later, you probably won't need to use fsck. If you do use it for any reason, please be aware that benign error messages can appear.
If you're not sure how your volume is formatted and you can't start up from your Mac OS X volume to find out, type the following command in a command-line interface and then press Return: diskutil info /
If you see "File System: Journaled HFS+" returned, you have a Journaled volume.
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt, type /sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED ***
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.
About live verification in Mac OS X 10.4.3 or later
In Mac OS X 10.4.3 or later, you can verify your Mac OS X volume while started from it. This is known as live verification, and can be used in three different ways.
Option 1: Verify your disk using Disk Utility while started from the startup disk. To find out how to do this, see this article. Please note that live verification does not involve any disk repair, so if verification finds something that should be repaired, start up from your Mac OS X Install disc and use Disk Utility as described above in "Try Disk Utility."
Option 2 (advanced): Use the command line and the command-line utility, diskutil.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return:
diskutil verify /
Note: Don't use this method to check non-startup volumes.
You should see messages such as the following during the disk check:
Could not unmount disk for verification, attempting live verify
Started verify/repair on volume disk0s3 Macintosh HD
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
Verify/repair finished on volume disk0s3 Macintosh HD
Option 3 (advanced): Use the command line and the fsck_hfs -l command.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return to determine your filesytem ID:
df -hl
Look for some lines of text that look like this:
Filesystem Size Used Avail Capacity Mounted on
/dev/disk0s3 37G 20G 17G 55% /
/dev/disk0s5 37G 37G 641M 98% /Volumes/Storage
Make a note of the first "disk" name that appears after /dev/, such as "disk0s3." This is your filesystem ID for your startup volume.
At the prompt, type the following command and then press Return:
df -hl
Then type the following command, where "disk0s3" is your filesystem ID you noted in step 4, then press Return:
sudo fsck_hfs -l /dev/disk0s3
When prompted, enter your admin password, then press Return to begin the verification.
You should see messages like these during the disk check:
** /dev/rdisk0s3 (NO WRITE)
** Root file system
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Macintosh HD appears to be OK.
Additional Information
If you're interested in UNIX-style command-line syntax, here's a look at how a couple of flags used in our instruction can influence fsck:
The -y flag: Tells fsck that you want to answer "yes" to all questions about fixing, repairing, or salvaging information. This is the optimal approach, as answering "no" to any question causes fsck to stop. You cannot determine that all necessary repairs have been made until fsck completes and gives its final report.
The -f flag: Forces fsck to check "clean" filesystems when preening.
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6) -
Warning when running Disk Utility
I installed Snow Leopard without issue on Friday, but when I run Disk Utility on my hard drive, I get the following message:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
I never received this message under Leopard. Can anyone tell me if it is a problem I can overlook or a more serious issue? Anything I can do to fix it? Thanks so much!Everyone is seeing this message. Don't worry about it.
Search the boards for more threads, if you'd like.
~Lyssa -
"Failure on Exit" when running Disk Utility
I am running Mac OS X 10.4.11. Recently, my computer has been freezing up, not shutting down or restarting properly (it just stays on the backdrop screen indefinitely), and running its battery down super-fast. In an attempt to see what is going on, I went into Disk Utility and ran "Verify Disk". After about five minutes, I got an error message saying, "The underlying task reported failure on exit." The list in the dialogue box said:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 9303472 instead of 9303471)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, since it is reporting failure on exit, the "Repair Disk" button isn't available. Everything I've found in forums says to restart with an OS X disc of some kind... I bought my computer from the Apple store, and no such disc came with it. What are my options here? I don't live near an Apple Store, so I would like to try to fix this myself... HELP, PLEASEYou cannot repair an active startup volume. To fix your drive do this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you don't know how to boot from an installer disc, then read the following:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading. -
Verification error when run the game after download the jad/jar by OTA on BB 8300
On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq -
Hi everyone,
I'm simply all out of ideas on what to do - my best guess is the problem is not specifically hard-drive related since all the 'normal' fixes just won't work.
What could be the cause of my issue? The only way i've managed to keep the Macbook Pro on for longer than a minute is through target drive, where it seems to work just fine - i can access everything. To sum up everything:
1 - I tried resetting the PRAM
2 - I tried to go in to safe mode, it shut off before i could type the password
3 - I tried fsck -fy command from single user mode, sometimes i can get to actually typing it but mostly it shuts off before
4 - I tried to repair disk via target drive - success, no problems detected (and it didnt fix my issue)
5 - I reinstalled OS Mavericks.
The Macbook Pro previously had some problems with the power-button not working properly (a mac-cunning friend of mine had to open up the mac and start it by swiping to metal pins on a specific (battery/power?) part inside it. The problem kinda went away afterwards but it might be related to this?
This is way off my comfort zone of 'diagnosing' issues, so I'm crossing fingers for some good advice.
Thanks,
Aske
DenmarkI think you're right.
If it's hardware related, is it possible to guess at what it might be? It would be nice to know how much I should expect to pay for a repair before actually getting it fixed. -
In the far left hand column, Devices keeps disappearing. I can get it back by downloading iTunes again but disappears again after I run disk utility.
With a Device plugged in - place your mouse cursor over DEVICES - you should see 'show' or 'hide'. Click on 'show'.
MJ -
my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?
Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up? -
i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great!
When I reboot from hdd, then run disk utility, I get the same error message i did b4 repair. I went thru two rounds of this.....
Can anyone help? thanksSorry guys, I don't see how to reply to you so I use reply to "me" basically.
So the error I get is "volume header needs minor repair" and then you need to perform repair from the installation disk message.
I did repair not verify from the disk twice. Every time ending in the "the volume had ha been successfully repaired". Then I reboot from the internal disk. Run disk utilities from it, do verify and get the same error message I got before repair. I hope this can shed some light fr you guys. Sorry I didn't include details in the original
MEssage. -
When I run disk utility, verify permissions I get "WARNING SUID file system/Library/Coreservices/Remotemanagement/ARDAgent.app/Contents/MacOS/ARDAge nt has been modified
Please read Disk Utility's Repair Disk Permissions messages that you can safely ignore.
Roger -
Lots of SUID WARNINGS in Disk Utility after installing 10.5.6
I ran Disk Utility after installing 10.5.6 from Software Updates and I get a lot of SUID Warnings like the following...
2008-12-16 12:29:01 -0800: Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
2008-12-16 12:29:01 -0800: Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
2008-12-16 12:29:01 -0800: Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
2008-12-16 12:29:02 -0800: Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Anyone know what this is about?indiana veteran wrote:
I'm getting....
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
Permissions differ on "System/Library/CoreServices/RawCamera.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not …
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--…
I do not like the idea of "just ignore", that starts to sound like Microsoft "do not worry about that blue screen just reboot"
Whether you like the idea or not, they are merely warnings.
Please search these forums before posting something that has been posted dozens of times before and answered as many times. Always search before posting. -
Cannot run Disk Utility, use terminal, or boot from CD, all HDs locked
I have a Mac Pro with 4 internal drives and 3 of them suddenly locked themselves. I can't run Disk Utility -- I get "underlying task reported failure on exit."
I can't boot from Disk Warrior CD. I hold down the C key til the Apple logo appears, and then the computer just restarts into my regular system on my hard drive.
I can run some apps from my startup drive, (obviously I can get on the internet). I downloaded Drive Genius but it will not install.
I cannot use the terminal to try any of those fancy tricks I read about here.
Here's what I get when I try Terminal:
login: PAM Error (line 396): System error
login: Could not determine audit condition
[Process completed]
And after that, I cannot type in the Terminal window.
Man, this is crazy. 2 of my other internal drives have backup systems on them, but they will not show up as choices in the startup disk section of my system preferences - cuz they are locked.
Any suggestions? I'm about to install a new drive and try and clone my working system on it and put Disk Warrior on it.DJWillis wrote:
Wait, can I use Terminal from another computer in target mode?
yes, but do you mean you can boot it in target mode but not from a DVD? this is very strange. try booting fro a DVD in a different way. reboot and hold "option" at the chime. this should boot you into startup disk manager. normally you can insert the DVd at the point and choose to boot from it. -
Need to run disk utility on iMac G4 with OSX 10.3.9/Hardware disk 10.2.7
I have an iMac G4 currently running with OS X 10.3.9, which was installed on it after it crashed a few years ago. I don't have any retail disks that match OS X 10.3.9, but I have the original manufacturer's hardware disk that came with the computer, which contains Mac OS version 10.2.7.
My question: In order to run disk utility and repair errors on this computer, do I need to purchase a retail version of the OS X 10.3 disk, or is there some way to run disk utility without the proper OSX disk? I read about checking for possible file system issues using fsck with OS X 10.3 or earlier—is fsck a viable option for me?
My computer is not having any substantial problems, but I want to avoid any by running Disk Utility now ...
Thanks in advance for any and all advice!Welcome To Discussions poptartsheart!
"...OS X 10.3.9, which was installed on it..."
How was it installed, and by whom?
You should have been provided a set of the Full Retail Version, of the Panther Install CDs, at that time.
"I read about checking for possible file system issues using fsck with OS X 10.3 or earlier—is fsck a viable option for me?"
You can run fsck, as instructed in this KB Article Resolve startup issues and perform disk maintenance with Disk Utility and fsck, but you really need to have a set of the Panther 10.3.x Full Retail discs.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, can be purchased, sometimes inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, AllMac, etc.
ali b -
Running Disk Utility off External Hard drive
To run "repair disk" in disk utility on my internal hard drive I'm supposed to insert my Install DVD, restart my mac and run disk utility - however running this program off the disk is much slower than running it off my 800firewire external hard drive. I've tried a few different ways of going about this:
1) Partitioning my hard drive in two (both HFS+) with more than enough room for the DVD, I've tried both making a Disk Image of the Install DVD and dragging it into the source field in the "restore" tab and dragged my Install partition into the destination field, after that was complete, I restarted my computer while holding the "alt" key I wasn't even offered the option to boot to my external hard drive
2) I've also tried after partitioning the external drive, in the restore tab just dragging the Install DVD (not the disk image) from the left of the disk utility window into the "source field" and again the partition into the destination field, and when restarting both with the "alt" key and by going to system preferences -> start up disk and choosing my external drive to boot from, I was still unable to boot off my drive.
Please let me know if anyone has any suggestions! This would be such a big help for me since I'm constantly helping people with diagnostic issues with their macs and this would save me so much time. Thanks in advance
GeorgeI'm not sure why you can't make a bootable copy of the installer DVD using Disk Utility but as Niel suggests, it is much better to install the OS on a partition on the external drive using the DVD & then use that instead of a 'clone' of the DVD as a boot source to run utilities. There are several reasons for this:
1. You can update the installed version of the OS on the external to take advantage of any improvements, including to Disk Utility, that may be released in the future.
2. The version of Snow Leopard that runs from the DVD is a special one that among other things is optimized for read-only media. For instance, it doesn't write log files to the startup disk since it doesn't expect that to be possible.
3. You can include other utilities on the external & easily customize it to your liking. For instance, configure it for automatic login to an admin user account, drop Disk Utility into that account's login items & it will automatically launch at the end of the boot process. You can do the same with shell scripts or Applescript applications for just about as much automation as your scripting skills & imagination can dream up.
However, one thing to keep in mind: since a HD is not read-only but a DVD is, you can never be as certain that your external is as reliable as the DVD, since it is possible for something to change or corrupt files on the HD but short of physical damage the DVD is immutable.
Maybe you are looking for
-
Help! I would like to update to the highest version I can with my older system - Mac OS 10.4.11. Can you help me?
-
ITouch stuck in "iPod is Disabled" mode and I can not enter password, How do I correct this?
Hello and good day, To who ever can assist me... My little sister recently experienced the feeling of having her iTouch stolen from her @ school. Since the incident occured, two of her best friends located her iTouch and returned it back to my sister
-
ALV GRID - Get setting of the variants
Dear All, I have a program which provides a list with ALV - the user can give his ALV variant on the selection-screen. I have to know the setting of the variant chosen - Field - Sort - subtotal - This program could be ran in background, that why I ha
-
Although I installed Snow Leopard from scratch, I encountered severe performance problems after a while. To copy a file, for instance, took minutes instead of seconds for a some 100 MB file. To switch between windows took long time. The processing wa
-
OSB 11g - send cookes during HTTP redirects
Hi everybody, I created the OSB business service BS1 to emulate HTTP POST request for the specific URL. The POST request to this URL returns: HTTP/1.1 302 Moved Temporarily Date: Tue, 03 Aug 2010 07:01:21 GMT Server: Apache P3P: CP="NOI DSP COR CURa