Wasn't sure if it the right place to ask this question, but are the white shopping bags sends out by Apple Store eco-friendly?

Well, First time to raise my hand here, question as titled.
No information can be found on the website though.

Joey ~ Welcome to the Support Communities. Although the white shopping bags aren't specifically mentioned, the page below explains Apple's general approach to reducing their environmental footprint:
http://www.apple.com/environment/
"...Our packaging designs use pulp fiber from post-consumer paper streams,"

Similar Messages

  • I sure hope this is the right place to ask this question.

    Hello.
    Is there a place where I can record and then listen to the recording of my voice? I need to say something into it for an assignment at school.
    Thank you.

    Hello 
    Open GarageBand
    Click New Music Project, choose a location and click Create
    In the bottom left hand corner click the + symbol and choose Real Instrument, click Create.
    Click the Red record button ◉ in the bar at the bottom. You are now recording.
    When you're finished click the pair of scissors ✂ in the bottom left hand corner of the window to open the editor and you can then use cut, copy and paste commands to edit as required.
    Then if you need to burn to disc:
    Choose Share menu > Send song to iTunes
    Open iTunes
    Create a playlist by clicking the + symbol in the bottom left hand corner of the window.
    Click Burn Disk ☢ in the bottom right hand corner.
    Hope that helps.
    mrtotes

  • Hi everyone, not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

    Hi everyone
    Not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

    Phoenix and Firebird were what Firefox was called before Firefox was settled on in 2004, and both used "birds" as the logo. IIRC, the dinosaur was used in the Mozilla Suite.
    Here are the earliest versions of the Mozilla Suite. <br />
    http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/
    I hope this request for a historical purposes of where Mozilla came from, because those old versions aren't safe to use on the internet any longer.

  • I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?

    I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?  I do nto care about anythign else.
    Here are the steps I though I took this morning:
    Backup iPad
    Connect to iTunes and downlaod newest version of iTunes and then newest iOS
    restart Vista Laptop
    upgrade to newest iOS
    I knew somethign was wrong when it took about 6 hours to upgrade the iPad
    at the end it errored with this message error (-50), but the upgrade worked
    I was expecting to see all my photos but didn't see them
    I have tried a restore to a back up 2 times.  The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
    I tried it again 2 hours ago and same message.
    They are very valuable to me and so now I am panicking
    Your help is much appreciated

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Im sorry to ask this question but am new too the imac world. Should i BUY intigo AV as suggested by apple and my bank has offered me something called Rapport!!! Any advice very much appreciated thanks

    Im sorry to ask this questioon, but am new to apple. Should i as recommended by apple buy and install intigo av, and can anyone advise me on Rapport as offered by the bank free of charge.
    Can anyone tell me how to increase the font size of the menu bar at the top of the desktop screen without changing the display setting.
    Told you I was new

    Kevsmac...
    You do not want Rapport...
    Read a post from one of their representatives > Trusteer's Rapport Software: Apple Support Communities
    If you want to install a/v software, use either ClamXav or Sophos.
    Free Antivirus for Mac - Sophos Anti-Virus for Mac  Edition
    Apple - Downloads - Networking & Security - ClamXav
    Good article here >  Thomas' Corner : Mac Virus Guide

  • I'm Not Sure this is this place to ask this question...but

    Hello Evey Body,
    I have A Sony Handycam Model #DCR-DVD405
    this camera uses mini dvd disk...
    is there any way I can get this camers to work with Imovie
    My imac does not See the camera when I plug it in
    I have a Hawaii vacation on several disc I want to get in to I Movie 11
    Any Help Would be Greatlel Appricated...
    I cant afford to by a different Camcorder
    Thanks you....
    please  emal any Help to
    <Edited by Host>
    thank again
    Joe

    Probably the cheapest, quickest way to get those disks into a format that iMovie can edit is to 'rip' them using Handbrake . It's a free program and will allow you convert the videos on the disks to a .mp4 file. These .mp4 video clips can then be imported into iMovie.
    An alternate method that will require you to spend some money is to purchase the QuickTime MPEG-2 Component from the Apple Store. Then download MPEG Streamclip which is free. With both of those pieces you can convert the whole disk into a format called Apple Intermediate Codec which iMovie '08, iMovie '09 and iMovie '11 use as their native editing format. The quality of the resulting video will be a little better going through the MPEG Streamclip route rather than converting using Handbrake. But use your best judgement, you don't have to spend any money to get the video working in iMovie, that's for sure.

  • Right place to ask tuning question?

    I have a query running that takes 2 minutes.
    It hits seven tables, of row counts 11, 3890, 8049, 9374, 9386, 9510, and 26460.
    By all means this is a small query. I have no cartesian joins (but everything is a nested loops outer), and get 7160 rows output.
    I believe that there should be no way that this query takes two minutes based on the size of the tables it hits and
    the simplicity of it. Unfortunately, four of the tables are 'joined in' as views that are filtered by a date from a one row
    table that is always cached. I have tried inline views instead of using the views, and putting an index on a
    table (just because it was doing a full table scan and nothing else I had done had changed the plan), and that
    gives me about 2 seconds faster response. I don't think I need an index on this table, but if it makes it go faster then
    I'm all for it..
    I've tried CBO (currently it's hinted to use RULE) and PQO, and they all go way out of proportion and take a lot
    longer than two minutes. Is this the place to put table descriptions, the query, and tkprof output? Would anyone be able
    to assist me?
    Thanks,
    Dennis

    Thanks, we analyze weekly. I'm trying to get off RBO (as it is really not improving at all between versions (has not been for awhile actually)).
    This is one of few views that have RBO, and the query time seems unreasonable for the amount of data it's pulling. I really expected to
    see a Cartesian Merge Join.
    1. Using Oracle 8.1.6.3 (in about two months, 9iR2).
    2. Have you been on my system??? We've had views 12 levels deep, with the 'outer' view doing 25 union alls. That was a mess. Fortunately,
    I did not design it so I can say it sucked (not that I'm saying I could have done anything better). This is fairly simple: here's the
    tkprof explain plan. This is the original plan. Adding the one index had much the same plan, but had a index range access on C_BKG_ADDRESS.
    C_BKG_ADDRESS is a MV I put this at the end. All the other C_ views basically select * from the base table where effective and expiration dates are between extract_date,
    which is a value in a one row cached table (table is only one row, one column and is cached).
    select T1.DISTRICT_FUNCTION_UNIT c1,
    T1.HOME_ORGANIZATION_DESC c2,
    T1.LAST_NAME c3, T1.FIRST_NAME c4,
    T1.MIDDLE_NAME c5, T1.BASE_SALARY_RATE c6,
    T1.TITLE_CD c7, T1.TITLE_DESC c8,
    T1.SALARY_GRADE c9, T1.HOME_ORGANIZATION_CD c10
    from HRDMADM.V_EE_ROSTER T1
    order by 1 asc, 2 asc, 10 asc, 8 asc, 7 asc, 3 asc, 4 asc
    call count cpu elapsed disk query current rows
    Parse 1 0.03 0.37 0 0 0 0
    Execute 2 0.00 0.01 0 0 0 0
    Fetch 476 6.58 8.58 4887 30627 99 7120
    total 479 6.61 8.96 4887 30627 99 7120
    Misses in library cache during parse: 1
    Optimizer goal: RULE
    Parsing user id: 129 (TESTTUNE)
    Rows Row Source Operation
    7120 SORT ORDER BY
    7120 VIEW V_EE_ROSTER
    7120 SORT UNIQUE
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 NESTED LOOPS OUTER
    7121 TABLE ACCESS FULL BKG_SNAP_EMPLOYEE
    7120 INDEX RANGE SCAN (object id 267185)
    7120 SORT JOIN
    9510 VIEW C_BKG_EMPL_ASGNMT
    9512 NTABLE ACCESS FULL HRDM_EXTRACT_DATE
    9510 TABLE ACCESS BY INDEX ROWID BKG_EMPL_ASGNMT
    9511 INDEX RANGE SCAN (object id 267191)
    6834 SORT JOIN
    8049 VIEW C_BKG_USER_FIELDS_ENTRY
    8049 NESTED LOOPS
    2 TABLE ACCESS FULL HRDM_EXTRACT_DATE
    8049 TABLE ACCESS FULL BKG_USER_FIELDS_ENTRY
    7117 SORT JOIN
    26460 TABLE ACCESS FULL C_BKG_ADDRESS
    7120 SORT JOIN
    11 VIEW C_REF_EMPLOYMENT_STATUS
    8049 VIEW C_BKG_USER_FIELDS_ENTRY
    8042 NTABLE ACCESS FULL HRDM_EXTRACT_DATE
    8049 TABLE ACCESS FULL BKG_USER_FIELDS_ENTRY
    7117 SORT JOIN
    26460 TABLE ACCESS FULL C_BKG_ADDRESS
    7111 SVNTABLE ACCESS FULL REF_EMPLOYMENT_STATUS
    7120 SORT JOIN
    3890 VIEW C_REF_TITLE
    3892 NTABLE ACCESS FULL HRDM_EXTRACT_DATE
    3890 TABLE ACCESS FULL REF_TITLE
    ======== this is V_EE_ROSTER ==============
    CREATE OR REPLACE VIEW HRDMADM.V_EE_ROSTER
    DISTRICT_FUNCTION_UNIT,
    HOME_AGENCY,
    HOME_ORGANIZATION_CD,
    HOME_ORGANIZATION_DESC,
    EFFECTIVE_DATE,
    GHRS_INTERNAL_EMPL_ID_NO,
    APPOINTMENT_ID,
    LAST_NAME,
    FIRST_NAME,
    MIDDLE_NAME,
    EMPLMT_STAT_CD,
    TITLE_CD,
    TITLE_DESC,
    SALARY_GRADE,
    AMT_BASIS_ID,
    SUPERVISORY_CD,
    BASE_SALARY_RATE,
    WORK_AREA_CD,
    WORK_EXCHG_CD,
    WORK_TRUNK_NO,
    EXT_NO,
    WORK_AREA_CD2,
    WORK_EXCHG_CD2,
    WORK_TRUNK_NO2,
    EXT_NO2,
    MAIL_ADDR_LINE_1,
    MAIL_ADDR_LINE_2,
    MAIL_CITY,
    MAIL_STATE,
    MAIL_ZIP_PREFIX,
    MAIL_ZIP_SUFFIX,
    SOCIAL_SECURITY_NO,
    BIRTH_DATE,
    RETIREMENT_SVC_DATE,
    DEPT_SVC_DATE,
    HIRED_DATE,
    PERM_TEMP_ID,
    ETHNIC_CD,
    ETHNIC_DESC,
    SEX,
    DISABILITY_CD,
    DISABILITY_DESC,
    AGE,
    HOME_AREA_CODE,
    HOME_EXCHG_CODE,
    HOME_TRUNK_NO,
    HOME_EXT_NO,
    MAIL_SAME_AS_HOME_ADDRESS_FL,
    PRIVATE_HOME_FL
    AS
    SELECT /*+ RULE */
    DISTINCT
    hrdm_homeorg.CalcDistFctUnit(CASGN.GHRS_INTERNAL_EMPL_ID_NO,
    CASGN.HOME_ORGANIZATION,
    CASGN.EFFECTIVE_DATE,
    CASGN.HOME_AGENCY) DISTRICT_FUNCTION_UNIT,
    HOME_AGENCY HOME_AGENCY,
    HOME_ORGANIZATION HOME_ORGANIZATION_CD,
    F_home_org_name(CASGN.HOME_ORGANIZATION,
    CASGN.EFFECTIVE_DATE,
    CASGN.HOME_AGENCY) HOME_ORGANIZATION_DESC,
    CASGN.EFFECTIVE_DATE EFFECTIVE_DATE,
    SNAP.GHRS_IN_EMPL_ID_NO GHRS_INTERNAL_EMPL_ID_NO,
    SNAP.APPT_ID APPOINTMENT_ID,
    SNAP.EMP_LAST_NAME LAST_NAME,
    SNAP.EMP_FIRST_NAME FIRST_NAME,
    SNAP.EMP_MIDDLE_NAME MIDDLE_NAME,
    SNAP.EMPS_CD EMPLMT_STAT_CD,
    SNAP.TITL_CD TITLE_CD,
    SNAP.TITL_LONG_DESC TITLE_DESC,
    SNAP.GRDE_CD SALARY_GRADE,
    SNAP.AMT_BASIS_ID AMT_BASIS_ID,
    CTITL.JOB_REQUIREMENT_CD SUPERVISORY_CD,
    SNAP.BASE_PAY_RATE_AMT BASE_SALARY_RATE,
    CASGN.WORK_LOC_1ST_AREA_CODE WORK_AREA_CD,
    CASGN.WORK_LOC_1ST_EXCHG_CODE WORK_EXCHG_CD,
    CASGN.WORK_LOC_1ST_TRUNK_NO WORK_TRUNK_NO,
    CASGN.WORK_LOC_1ST_EXT_NO EXT_NO,
    CASGN.WORK_LOC_2ND_AREA_CODE WORK_AREA_CD2,
    CASGN.WORK_LOC_2ND_EXCHG_CODE WORK_EXCHG_CD2,
    CASGN.WORK_LOC_2ND_TRUNK_NO WORK_TRUNK_NO2,
    CASGN.WORK_LOC_2ND_EXT_NO EXT_NO2,
    SNAP.MAIL_ADDR_LINE_1 MAIL_ADDR_LINE_1,
    SNAP.MAIL_ADDR_LINE_2 MAIL_ADDR_LINE_2,
    SNAP.MAIL_CITY_NAME MAIL_CITY,
    SNAP.MAIL_ST_CD MAIL_STATE,
    SNAP.MAIL_ZIP_PREFIX MAIL_ZIP_PREFIX,
    SNAP.MAIL_ZIP_SUFFIX MAIL_ZIP_SUFFIX,
    SNAP.EMP_ID SOCIAL_SECURITY_NO,
    SNAP.DOB_DATE BIRTH_DATE,
    USR1.ELEMENT_VALUE_01 RETIREMENT_SVC_DATE,
    USR1.ELEMENT_VALUE_02 DEPT_SVC_DATE,
    USR1.ELEMENT_VALUE_03 HIRED_DATE,
    SNAP.PERM_TEMP_FL PERM_TEMP_ID,
    SNAP.ETHN_CD ETHNIC_CD,
    SNAP.ETHN_LONG_DESC ETHNIC_DESC,
    SNAP.GENDER_ID SEX,
    SNAP.DSBL_CD DISABILITY_CD,
    SNAP.DSBL_LONG_DESC DISABILITY_DESC,
    SNAP.EMPLOYEE_AGE AGE,
    C_BKG_ADDRESS.EMPLOYEE_AREA_CODE HOME_AREA_CODE,
    C_BKG_ADDRESS.EMPLOYEE_EXCHG_CODE HOME_EXCHG_CODE,
    C_BKG_ADDRESS.EMPLOYEE_TRUNK_NO HOME_TRUNK_NO,
    C_BKG_ADDRESS.EMPLOYEE_EXT_NO HOME_EXT_No,
    C_BKG_ADDRESS.MAIL_SAME_AS_HOME_ADDRESS_FL MAIL_SAME_AS_HOME_ADDRESS_FL,
    C_BKG_ADDRESS.PRIVATE_HOME_FL PRIVATE_HOME_FL
    FROM <---- NOTE: I'm testing this now with the tables in the proper order for RULE *
    BKG_SNAP_EMPLOYEE SNAP,
    C_BKG_EMPL_ASGNMT CASGN,
    C_REF_TITLE CTITL,
    BKG_EMPL_APPT,
    C_REF_EMPLOYMENT_STATUS,
    C_BKG_USER_FIELDS_ENTRY USR1,
    C_BKG_ADDRESS
    WHERE
    SNAP.GHRS_IN_EMPL_ID_NO = CASGN.GHRS_INTERNAL_EMPL_ID_NO (+) AND
    NVL(SNAP.APPT_ID,' ' ) = NVL(CASGN.APPOINTMENT_ID (+),' ') AND
    SNAP.GHRS_IN_EMPL_ID_NO = C_BKG_ADDRESS.GHRS_INTERNAL_EMPL_ID_NO (+) AND
    SNAP.GHRS_IN_EMPL_ID_NO = BKG_EMPL_APPT.GHRS_INTERNAL_EMPL_ID_NO (+) AND
    NVL(SNAP.APPT_ID, ' ') = NVL(BKG_EMPL_APPT.APPOINTMENT_ID(+), ' ') AND
    SNAP.TITL_CD = CTITL.TITLE_CD (+) AND
    SNAP.EMPS_CD = C_REF_EMPLOYMENT_STATUS.EMPLOYMENT_STATUS_CD (+) AND
    CASGN.GHRS_INTERNAL_EMPL_ID_NO = USR1.GHRS_INTERNAL_EMPL_ID_NO (+) AND
    NVL(CASGN.APPOINTMENT_ID, ' ') = NVL(USR1.APPOINTMENT_ID (+), ' ') AND
    SNAP.EMPS_CD NOT IN ('2', 'T', '0', '8') AND
    SNAP.TITL_CD <> 'R09986'
    ====== this is explain plan w/ the index =============
    call count cpu elapsed disk query current rows
    Parse 1 0.04 0.32 0 0 0 0
    Execute 2 0.00 0.00 0 0 0 0
    Fetch 476 6.23 17.47 7253 51598 87 7120
    total 479 6.27 17.79 7253 51598 87 7120
    Misses in library cache during parse: 1
    Optimizer goal: RULE
    Parsing user id: 129 (TESTTUNE)
    Rows Row Source Operation
    7120 SORT ORDER BY
    7120 VIEW V_EE_ROSTER
    7120 SORT UNIQUE
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 MERGE JOIN OUTER
    7121 SORT JOIN
    7120 NESTED LOOPS OUTER
    7121 NESTED LOOPS OUTER
    7121 TABLE ACCESS FULL BKG_SNAP_EMPLOYEE
    7117 TABLE ACCESS BY INDEX ROWID C_BKG_ADDRESS
    14237 INDEX RANGE SCAN (object id 362347)
    7120 INDEX RANGE SCAN (object id 267185)
    7120 SORT JOIN
    9510 VIEW C_BKG_EMPL_ASGNMT
    9510 NESTED LOOPS
    2 TABLE ACCESS FULL HRDM_EXTRACT_DATE
    9510 TABLE ACCESS BY INDEX ROWID BKG_EMPL_ASGNMT
    9511 INDEX RANGE SCAN (object id 267191)
    6834 SORT JOIN
    8049 VIEW C_BKG_USER_FIELDS_ENTRY
    8049 NESTED LOOPS
    2 TABLE ACCESS FULL HRDM_EXTRACT_DATE
    8049 TABLE ACCESS FULL BKG_USER_FIELDS_ENTRY
    7120 SORT JOIN
    11 VIEW C_REF_EMPLOYMENT_STATUS
    11 NESTED LOOPS
    2 TABLE ACCESS FULL HRDM_EXTRACT_DATE
    11 TABLE ACCESS FULL REF_EMPLOYMENT_STATUS
    7120 SORT JOIN
    3890 VIEW C_REF_TITLE
    3890 NESTED LOOPS
    2 TABLE ACCESS FULL HRDM_EXTRACT_DATE
    3890 TABLE ACCESS FULL REF_TITLE
    ====
    Thanks,
    Dennis

  • I'm not sure if this is the right place to post this question...

    The hard drive icon has mysteriously disappeared off of my desktop and I have NO CLUE how to get it back! I also added another hard drive and that icon as well, does not show up on the desktop. If I load a cd in the drive, it will show up - but my hard drive(s) won't.
    HELP!!!!
    G4   Mac OS X (10.4.8)  

    Try this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Not the right place to ask this but...

    iPhone 4S will start shipping to my country in the 22nd of November, but retailers here are starting to sell it at twice what it costs.
    I though Apple condemned this actions. Can you elucidate me?

    Try uninstalling and installing again:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

  • HT4623 I am using my iPod to ask this question, but I can't get wifi on my iPad mini. It showed the network, and says it is connecting, but it won't complete. Thanks in advance

    My iPad mini isn't connecting to wifi, and I need help. I have tried forgetting the network and retyping the password, turning off wifi and waiting, and just giving the network time to try and load. None of the worked. I need answers as soon as possible
    Thanks in advance

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I see two others have asked this question, but I don't find the answer satisfactory: So when will the GPIB driver support the 2.4 kernel? Or

    for that matter when will it get beyond BETA status? When I bought Labview for Linux, I assumed NI would provide GPIB drivers so that I'd be able to use it. I think we've been at BETA 0.6 for almost a year. For what Labview costs, this isn't reasonable.

    for that matter when will it get beyond BETA status? When I bought Labview for Linux, I assumed NI would provide GPIB drivers so that I'd be able to use it. I think we've been at BETA 0.6 for almost a year. For what Labview costs, this isn't reasonable.For updates on the Linux Driver, keep referring to the ni.com/linux site.
    Randy Solomonson
    Applications Engineer
    National Instruments

  • Hi, i guess this is the right place to ask? Not sure where else to go...

    I have audio visualization on my pc, so when i play songs from MP3, random patterns etc are generated, this im sure you know.
    well, is there a way to turn my MP3 track, into a VIDEO so i can attach the Visualization to the song - and burn to CD, and put in my DVD player...?
    Thanks

    Definitely not the right place to ask. This has absolutely nothing to do with Java.
    But what you need is screen capture software (Fraps for example...go to download.com or google for other screen capture software). You'll need to use the capture software to create your video. Then use some kind of authoring tool to create your DVD, with the sound and video files put together.
    If you came to a Java forum for help with this, the solution might be a bit over your head...

  • I have scroll text box that is placed in a section of the page, It is in the right place on IE, Chrome, Safari, But not in Firefox?

    I have scroll text box that is placed in a section of the page, It is in the right place on IE, Chrome, Safari, But not in Firefox?
    Can anybody tell me why and how I can fix it. The page is baystatewiring.com/blog.html

    You need to make the text box float left.

  • I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake.  Is there any way I can restore them to the right place on my system Note most are on an external hard drive. :(

    I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake.  Is there any way I can restore them to the right place on my system Note most are on an external hard drive.

    You can drag them out of the trash folder to wherever you wish. There is no automatic way to restore them.
    If you have a recent backup of your computer (at the risk of preaching, everyone should have one), restore them from there.
    Barry
    P.S. I have no clue what you did or why you have 44,000 on the external drive

  • I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask...
    Uhm, why don't you go to the right place, then? There are several Steam/Portal forums out there...

Maybe you are looking for

  • How to remove Layout page when submitting reports in self service?

    Hi, when submitting a report or request thru self service, there are 7 steps or pages to go thru. We would like to hide some of these pages and we learned that this could be done thru the Web HTML Call tab when creating the function for the report (S

  • How to low level format an external hard drive on Yosemite

    I need to perform a low level format on an external hard drive as the WD external hard drive does't provide instructions for doing it on my Mac with Yosemite.

  • Passing parameter to a dynamic page portlet

    We need to create a drill-down report using pl/sql, but it's not working when we passed a parameter. We did the following: 1. Create a package and a store procedure. 2. The store procedure creates the report and the look-and-feel of the report. 3. Cr

  • Callable Object Type as Web Page

    Hi, I am trying to create a GP programatically.  I want to use the CO tyoe as web page, but I am not able to understand how to set the URL for the CO. Here is my code:      IGPCallableObjectTypeManager coTypeManager =  GPCallableObjectTypeFactory.get

  • JTable and filtering

    Hi, is it possible to filter data in a JTable? For example, if the user only wants to view data that contains "TOM" in the firstname column, then only rows with TOM will be displayed on the table. How can implement that? Would I need different tablem