Wat's OLTP? How it is related to CRM & R/3.

Hi experts,
Wats OLTP, Online transaction processing.
How the same is related to CRM & R/3.
How the same is related to BDOC's.
Thanks in advance
prajith P

Hi,
OLTP refers to backend ECC ( or R/3 ) system which is connected thru middleware to SAP CRM system.
hope this helps,
Regards,
PD

Similar Messages

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

How to find out the tables related to CRM datasources?

How to find out the tables related to CRM datasources? For example, the table related to 0CRM_OPPT_H.
Regards,
R.Ravi

Hi Ravi,
To find out all tables used go into the CRM source system to transaction RSA3 and prepare the selections for extraction of your datasource.
In a parallel session execute transaction ST05 and press the button 'Activate Trace'
Go back to the extracor checker and execute the extraction.
Switch sessions and subsequently 'Deactivate Trace' and 'Display Trace'.
This will list all tables used.
regards,
Olav

File to IDOC:how do i relate inbound idoc with generated idoc in the R/3

hi experts;
can any body tell me how can i relate the IDOC number genrated in the PI with the generated IDoc number in the SAP R/3 system for file to IDOC scenario?
in SAP PI for tcade idx5, idoc no is:12002
but in SAP R/3 in tcode WE05, idoc no is:846915
how can i know a particular message (in SAP PI) created a particular idoc in the backend SAP R/3 System.
thanks in advance,
kumar

Hi Kumar
at the time of testing you have to note down a time at what ur file got picked up ok
then go to we05
-> give the date on CREATED ON field.
-> then in BASIC TYPE field select your particular IDOC CREMAS05 or whatever, see the TIME field that you have noted down at the time of testing, if that is matching means that is ur latest IDOC you have tested.
-> one more thing, tha last IDOC showing in the list means that is your latest IDOC you have tested.
Hope i have helped you, points plz
Warm Regards
Dheeraj Kumar

What does the scriptcollector do and how does it related to jsf lifecycle?

hi,
i want to know what does the scriptcollector do and how does it related to jsf lifecycle? and also in the scriptcollector if i call this,
preRender=#{myBean.onPageLoadBegin}
postRender=#{myBean.onPageLoadEnd}
how my page will react?

The hx:scriptCollector is part of the IBM Faces Client Framework and has nothing to do with Sun JSF RI.
Lot of the hx components require specific Javascript and those hx components should be placed inside a single hx:scriptCollector which on its turn checks the nested hx components and renders the desired Javascript for it at the end of the tag. Check the HTML source for that Javascript.

How to use relative paths in Captivate 8 / Cómo usar URL's relativas en Captivate 8

Hello, I have developed a bunch of courses which will be migrated to a new site and I am having trouble changing the absolute paths into relative URL's to resources such as PDF files inserted into the scorm packages. I cannot find information on how to use relative paths in Captivate. Please help. Thank you.

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Stock room tables in oracle apps ? and how customer is related with those?

Hi All
Can any give the details about stock room tables in oracle apps ? and how customer is related with those tables.
Thank you

question is not clear, but is it what you are looking for ?
Stock Locators in Inventory tableis mtl_item_locations

What is BOM? Steps Needed. How is it Related to Product Costing

Gurus,
What is BOM?
How is it related to Product Costing and Profitability Analysis and CO?
Technical help and steps would be appreciated.
Thanks.
Points available.

Hi,
BOM (Bill of Material) is a structured list of components (with the object number, quantity and unit of measure) that go into making of a product or an assembly.
Bill of Material can be simple or complex depending upon the structure of the product. And, a collection of BOMs that lets you describe a product or a number of similar products is known as BOM Group.
T code is CK51.
In product costing BOM is used to estimate the cost incurred for the creation of a finished product.
Technically, when u do a product cost run for particular material and if you don't have BOM for the material, the system will give an error.
If useful, assign points.
Regards,
Manju

Add a system status in CS? and how is it related?

Is it possible to add a system status (not the user status) in CS? (for equipments like status "INAC")
If yes, how is the relation made between a GI of movement type 551 (scrapping) and a automatic change of status in transaction IE02.
What I want is in case of a GI of 551 that SAP chooses my
new status (SCRP) in IE02....

Is it possible to add a system status (not the user status) in CS? (for equipments like status "INAC")
If yes, how is the relation made between a GI of movement type 551 (scrapping) and a automatic change of status in transaction IE02.
What I want is in case of a GI of 551 that SAP chooses my
new status (SCRP) in IE02....

How can we relate c and x types in ABAP

hi all,
I would like to know how we could relate c type and x type in ABAP.
In terms of size specification.
Thank you all
prasad.

Hi Prasad,
Consider the following code snippet -
data : char type c,
hexa type x.
Now, both these variables are of 1 byte each. However, they store different kinds of data, so we have -
hexa = '41'.
write : hexa to char.
write: char , hexa.
hexa is going to store the hexadecimal number 41. (the decimal equivalent is 65). The first write statement does the automatic type conversion. so we get the 65th ASCII character in the character variable (which is the capital A).
Hope that helps.
Regards,
Anand MAndalika.

HT1766 I want to delete all my back up wats app messages.how do i do that

want to delete all my back up wats app messages.how do i do that

Hi,
I would imagine the best way would be to
connect your Ipad to your mac or pc
in the info page check the box next to "sync address book contacts"
tick "Yahoo address book contacts"
scroll to the bottom and under "advanced" check the box for contacts
sync
I strongly suggest a backup before you do all of this.
Let me know.
Ricc

How to make relative links

Hello.
I need your help.
Inside the public_html folder I have two files one index.dir and part1.dir The file (index.dir) I wanted to do html and I do the Regulating through public settings
My problem is that it will link files? I do not know how to do it and I want your help please.
How to make relative links?
Information my project test:
Script from index to part1
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO NEXT BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the next marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the next marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "test1" of movie "pat1" -- test1 is Maker and the file is part1.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
script from part1 to index
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO PREVIOUS BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the previous marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the previous marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "Intro" of movie "index" -- Intro is Maker and the file is index.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
Please help
Look my page for you to understand my problem www.ionio.gr/~aleksgeor

It looks like you have taken a behavior from the Library Palette and hard coded it to suit your needs. This was unnecessary. Instead try the following behaviors attached to buttons that take you between movies - assuming they are in the same directory:
on mouseUp me
gotoNetMovie("@/part1.dcr#test1")
end
on mouseUp me
gotoNetMovie("@/test.dcr#Intro")
end
Also, you should Shockwave-compress your files to DCR (see the Publish Settings) in order to make your movies as small as possible so they download quickly

How the HR related data of BP is stored in SAPCRM Sys??

Hi Guru's,
I' m very new to the CRM.
I want to know <b>How the HR related data of BP is stored in SAPCRM System?? for the project requirement.</b>
Please, can anybody help in this regard ??
Regards,
Arjun

hi,
I don;t entirely understand your question.
But just as in R/3 HR data is stored in infotypes, accesible as always with PPOM, but for CRM, there's also PPOMA_CRM.
If you check the evaluation paths in OOAW, you also see some specific ones for BP. this is also an entity in HR, just as P, O CP etc.
In short, data is stored as relations eventually in table HRP1001
Kind regards, Rob Dielemans

Please someone could help in explain how calenders are related among icloud and my imac ?

please someone could help in explaining how calenders are related among icloud and my imac in terms of backuping and recovery ?
Thanks
JBS

Open GarageBand's preferences, and under Audio/MIDI set the Input popUp menu to the iMic. You can also set the Output popUp to the iMic if you have headphones plugged into it, otherwise set it to Built-In.
Create a New Basic Track, and you're ready to record.
--HangTime [Will Compute for Food] B-|>

What is ADM methodology? how it will related to SAP R/3 system?

hello friends,
What is ADM methodology? whoes product it is? and how can we use it to SAP R/3 system (for implementation or support).
What is the main difference between ASAP and ADM methodology.
Can anyone have an knowledge on ADM methodology? Pls send the information or document to email: [email protected]
thanks in advance,
will be rewarded,
Regards,
Srinu.K

Hi Manish,
thanks for the reply. But i don't think ADM what it stands for.
As per my knowledge ADM is Application Development and Maintainence (ADM) methodology.
But, i don't have much knowlege on that and how this will related to SAP R/3 system.
Can anybody have knowledge on ADM? how can we use for SAP R/3 system?
pls, do the needful,
Regards,
Srinu.K
Message was edited by:
sapsrin

Wat's OLTP? How it is related to CRM & R/3.

Similar Messages

Maybe you are looking for