Wat to do before 2.3 update

Hi everyone, im looking to update my X10 from 2.1 to 2.3. Before i do this i just wondered if anyone can tell me how to save all my apps that i have downloaded. I have used back up and restore the last time for my 2.1 update but it did not save any of my apps and i had to download them all again. Dont want to have this problem again so any help would be great. Thanks.

check this thread
http://talk.sonyericsson.com/thread/20218
and this
http://talk.sonyericsson.com/thread/19735
that way you can backup everything before the update
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Before the recent updates to Firefox, clicking on the back button always brought me back to the same place on the page where I had been, but now it brings me to the top of the page. How do I restore the previous feature?

    Before the recent updates to Firefox, when I would go to another page in the same window and then clickon the back button, Firefox used to bring me back to the same place on the page where I had been, but now it brings me to the top of the page, meaning that I have to laboriously scroll down to the old place. How do I restore the previous feature?

    That change was made in Firefox 4, 6 months ago.
    Click-hold the unified Back / Forward button <br />
    or <br />
    right-click it to get the Back / Forward history for that tab.
    Or install this extension to get the old "drop-marker" button restored. <br />
    https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

  • I can't get the music on my phone to play in my car any more: It played fine before the latest update, now when I hit the MP3 button on my car radio, it says "No Media found"

    Before the last update, I was able to play the music on my LG 2 over my car stereo system via blue tooth.  A week ago I attempted to play my music in the car while on an 8hr drive and it wouldn't play.  Normally, I select the music widget on my phone and then press the MP3 button on my car stereo and the music plays in the car.  This has happened since the last update.  Did the newest update (a month ago) change something that is keeping my music from playing in the car now????

    right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

  • Repairing permissions before and after updating software

    What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

    This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
    I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
    Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
    Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
    But, to each his own.
    HTH
    TiPB 867   Mac OS X (10.4.6)  

  • Oracle Alert: Access before and after update values of a table column

    We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form.
    I have defined an Event based Oracle Alert which fires 'On Update' of the table X.
    Could anyone please let me know as how to access the value of 'END_DATE' before and after update (i.e :new.END_DATE and :old.END_DATE) in the sql query of the alert.
    The need to use the before update and after update values of the attribute 'END_DATE' is that if we add the condition END_DATE is not null, the alert is sent even if any other attrbutes are updated in the Oracle form which is not the intended behavior.
    Appreciate any help.
    Thanks

    Hi
    use selectionlistener for your first table then add clientlistener and serverlistener so that you will get the rows on click in back bean.
    then get second table vo and and create and add row for that view object. add partial target to refresh your second table from back bean.
    on click of save call commit operation.

  • I had a prepaid card added to my i tunes and now the game is asking to be updated and before i can update i need to put in the prepaid card information but i threw the card away there was no more money on it what do i do?

    I had a prepaid card added to my i tunes and now the game is asking to be updated and before i can update i need to put in the prepaid card information but i threw the card away there was no more money on it what do i do?

    I just found another address book entry that was repeated 2473 times!!!   This is a just a little ridiculous, don't you think?   And why that one?  Most are ok but ....

  • Should I repair permissions before or after updating to Mac OS X 10.7.2?

    Hi,
    Should I repair permissions before or after updating to Mac OS X 10.7.2? or should I fix permissions before and after the update?

    This is not a routine maintenance. Upgrades can be screwed up if the system that is upgraded is screwed up. I believe in a "better safe than sorry" approach. If you repair permissions and the hard drive prior to an upgrade then if there be a problem perhaps that problem will not propagate to the new upgraded system. If there are no problems doing the repairs is harmless.
    When it comes to the topic of permissions repairs there are many opinions but not much fact. In other words there doesn't appear to be a formal analysis of whether repairing permissions is only useful when a permissions problem arises. But there is a lot of anecdotal evidence suggesting that a repair both before and after a major system upgrade can reduce the risk of problems.
    This is my opinion on the matter. I do not generally disagree with Niel or MacJack, but as I said I prefer to be safe rather than sorry.
    Here's my general approach:
    How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
    A. Repair the Hard Drive and Permissions:
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the backup volume. Source means the internal startup volume.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade to Lion:
    Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
    Boot From The Lion Installer which is located in your Applications folder.
    Follow instructions for installation.

  • Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

    I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

    I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

  • HT1937 I can't get do this iCloud, I just do not get it! I looked at so many instructions to try and help me and nothing seems to work. All I want to do is copy and paste all my photo's and videos as I used to before the iphone updated to iOS. Can you hel

    I can't do this iCloud thing, I just do not get it! I looked at so many instructions to try and help me and nothing seems to work. All I want to do is copy and paste all my photo's and videos as I used to before the iphone updated to iOS. Can you help me? P
    I've tried looking for the devise in My computer but all it says is iCloud. I really want to find the DMIC folder and I don't know how!

    Emma Norton wrote:
    I've tried looking for the devise in My computer but all it says is iCloud.
    You should not see anything labeled iCloud in Windows Explorer.

  • Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

    When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

    What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

  • I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

    i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

    Chester31,
    Thank you very much for sharing your file with us!  Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
    Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started?  Did you update your iOS from 7.x to 8.0 recently?
    We will continue investigating the problem and let you know what we find.
    Thank you again for your help.

  • HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

    I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

    I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

  • When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of CC and now it isn't editing photos!  HELP please required.

    When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of Photoshop CC and now it isn't editing photos!
    Lightroom opens up Photoshop but the image doesn't appear!  Any help gratefully needed!

    Ok I sorted it, by uninstalling and re-installing Photoshop

  • How do I change my iTunes library from albums listing alphabetically back to artist listing alphabetically.  Before the last update to iTunes, everything was listed by artist, now it all is listed by album name.  I can't find a way to return it to artist

    Before the latest update to iTunes, everything was listed by artist.  All albums by the same artist were listed together.  Now they are all separated by the name of the album instead of the artist.  How do I return to the other format?

    Are you viewing it in Artist view or Album view? In Album view, it should still list albums by artist name, then album name. If you're in Album view, you might be looking for Artist view.

  • My iTunes got deleted off my computer before I had updated my iPhone!! When I downloaded it again all my app purchases and songs were gone!!! Is there anyway apple can help get them back and who can I contact???

    My iTunes got deleted off my computer before I had updated my iPhone. When I reinstalled it everything was gone! I lost all my itune purchased apps and songs!! Is there anyway apple can help me get them back??? And who can I contact?? Please help I really need my music back!!

    It has always beenv ery basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to put everything back.
    If you have failed to backup, then you can redownload some content.  Open itunes store, click Purchased, under Quick Links

Maybe you are looking for