Way to expand/contract group footers?

Hi,
I have a report that includes totals in a group footer, but only for some of the elements in the group. For other elements, the group totals are N/A or zero, so I am suppressing the total fields from printing. The report "reserves" the space in the group footer, whether there are fields printing in the footer or not. This looks fine when there are totals, but there's a big blank gap in my report when there are any not totals. Any way to shrink or suppress the reserved space when there are no fields printing in the group footer? Thanks.

Hi,
It is not supported to expand distribution group before sending to see all members in OWA. For more information about this, please refer to Distribution Group Expansion feature in
Outlook vs. OWA 2013 Comparison Table:
http://blogs.technet.com/b/mconeill/archive/2013/08/29/outlook-2013-vs-owa-2013.aspx
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Ways of creating contract and process flow of contracts

hi friends
ways of creating contract and process flow of contracts
thanks for ur help
regards
krishna

hi,
In the MM Purchasing component, a contract is a type of outline purchase agreement against which release orders (releases) can be issued for agreed materials or services as and when required during a certain overall time-frame.
Contracts can take the following forms:
Quantity contracts
Use this type of contract if the total quantity to be ordered during the validity period of the contract is known in advance. The contract is regarded as fulfilled when release orders totaling a given quantity have been issued.
Value contracts
Use this type of contract if the total value of all release orders issued against the contract is not to exceed a certain predefined value. The contract is regarded as fulfilled when release orders totaling a given value have been issued.
You can also set up corporate buying contracts with your vendors. These are valid for all plants and company codes within a client (see Centrally Agreed Contract).
You can create a contract as follows:
Manually
You enter all data relating to the contract manually.
Using the referencing technique
As reference document (the document you copy from), you can use:
Purchase requisitions
RFQs/quotations
Other contracts
CREATION OF CONTRACT MANUALLY:
Choose Outline agreement --> Contract --> Create(ME31K)
The initial screen appears.
Enter the necessary data. If you make any specifications under the group heading Default data, this data will appear as the default data in each item.
In the Agreement type field, specify whether you are creating a quantity or value contract, for example.
Press ENTER .
The header data screen appears.
Enter the contract validity period. Check the other fields on this screen and make any necessary changes (e.g. the terms of payment) and define the header conditions.
Press ENTER .
The item overview screen appears.
On this screen, enter the information for each item (material number, target quantity, price, receiving plant, or account assignment, etc.) using the same procedure as with purchase orders.
Material without a master record: leave the field for the material number empty and enter the following:
u2013 Short description of the relevant material or service in the Short text field
u2013 Material group to which the material belongs, in the Material group field
u2013 Account assignment category
You can enter u (unknown) or the category of an account assignment.
u2013 The target quantity and the order unit
If you specify an account assignment category other than U (field A), you must enter the relevant account assignment data for the item. To do so, choose Item ® Account assignments (see also Account Assignment).
If necessary, review the details for each item. Select the item(s) to review. Then select Item -> Details.
Enter the desired conditions.
Enter further text for the item if any additional instructions to the vendor or Goods Receiving are necessary. Choose Item -> Texts -> Text overview.
Save the contract.
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 25, 2008 7:20 AM

Expanding/contracting timeline shortcuts. "-" and "+" do not work.

I have purchased Adobe Premiere Elements 13. One thing I need to do a lot during my project is expand/contract the timeline in Expert view. Everywhere I look online I am directed to using "+" or "-" to do this.
However, these buttons do not appear to do anything - even in combination with CTRL or ALT. What am I missing?
thanks
Ed

edwardsyvester
What are your expectations - expand the Timeline or to increase the Track size?
With your focus on the -+ Zoom Out Zoom In above the Timeline, check out the slider.
When you first open the project and import to the Expert workspace - default position
When you move the slider all the way to the right (max)
And, to the immediate right of the Render button is an icon "Fit to Visible Timeline" (shortcut \) if you need to use that.
Are you saying that none of that happens when you move the slider to max (Zoom In) to min (Zoom Out)?
Or are you looking for the Large track size which can be obtained by right clicking near the track name and selecting from the drop
down menu Track Size...Large? The following is screenshot 1 with the default location for the zoom slider and with Track Size = Large.
Please review and consider. If the above does not address your situation, then we will go for the deletion of
the Adobe Premiere Elements Prefs file.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 13.0
Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are not working with hidden folders enabled.
Looking forward to your results.
ATR

Selection criteria are not applied to summary fields on group footers.

I wonder if anyone can help me with this problem. I am using Crystal reports version 11.2, and my data source is a Sql Server view.
The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
ie ....                record1                      2
                       record2                      8
                       group level total         10
This works fine when I run the report using Crystal's "print preview" facility. However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                       record1                      2
                       record2                      8
                       group level total          19
I tried putting the date selection criteria at both record and group level, but that did not work.
I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above. However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer. In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae. The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them. And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
Please tell me that there is something simple that I have been doing wrong!!! If I have not given enough information for you to answer, please let me know.
Thanks,
Anne-Marie

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

In Address Book, any way to Show/Hide groups from view in the "ALL" view?

I have groups of contacts in Address Book (v4.0.4) that I plan to use in the future, but right now having to wade through and past all of their individual entries when I am scanning my contact list in the "All" group view. Is there any way to Show/Hide these sub-groups with a visibility check-box? The sub-group name would still be there in the group list (to remind me that it exists and make it visible if desired), but I would have a lot less clutter and scrolling the rest of the time.
I know I can export groups in vCard format and re-import later, but a lot of my original custom fields for the contacts are lost in the process. Is there a 3rd-party plug-in? (Apple, are you working on something like this?)

Hi Mike, My Address Book app is behaving correctly (maybe I'm not).
I'm just saying there are times when I want to see "most" of my total collection of contacts, maybe just for the purpose of creating new groups at particular time and want to see at one time the pool of contacts I have to choose from. There are groups that I very seldom need to use, so it would be a way of putting those groups (and their contacts) into "cold storage."
I also may want to do searches from among most of my contacts, but also I may want to eliminate certain other particular groups from that search pool. That is the reason for wanting to do the "Show/Hide" thing. It is a way of displaying a logical "ALL" minus "SOME", which is the basically same thing as displaying the logical "UNION" of more than one group of contacts at one time. Can this be done?
Is there a way to open alternate address books, from within the same Address Book app (and logged in as the same user)? That would allow me to truly isolate my work list from my home list.
One answer to this occurs to me: I could create different log-ins on my PowerBook, and build the different variants of the Address Book I might want into each login and use Fast User Switching to get into each list of contacts. That seems like a lot of extra work . . . and logging in. Any suggestions?
Scott

Is there any way to expand both the OSX and Bootcamp partitions after imaging the drive to a larger HDD?

Hey all. I have been searching forums and racking my brain to find a way to fix an issue I am having with my Late 2011 13" MBP. SInce I wasn't able to find an answer, I figured it was time for reach out to the community.
I purchased a Late 2011 13" Core i5 MBP that had a bad HDD from a friend. I replaced the HDD with an old 100GB SATA drive I had lying around. My mistake was thinking that it was a 1TB drive. Regardless, I was able to reinstall Lion to the new HDD and get the machine up and running. Once that was working, I went ahead and upgraded to Mountain Lion with no issues, then I unstalled Boot Camp and Windows 8. Everything installed without a hitch and was working great. Right about that time I realized that I had almost no free hard drive space and discovered my error (the 100GB HDD).
I pulled the HDD and put in in my ASUS G74SX laptop along with a Seagate 750GB Hybrid Drive and used Clonezilla to do a hardware-to-hardware clone of the drive. When it was completed, I put the 750GB Hybrid drive in the MBP and it booted right up with no problems. I was also able to switch back and forth from my Boot Camp drive and everything appears to be working as it should.
The only problem I have is that both the OSX partition and the Boot Camp partition are still the same size as they were before I cloned the drive. Try as I might, I can't find any way to expand either one to use the additional 650GB of space that is sitting on the drive unused. Disk Utility won't allow me to expand the partitions unless the free space is contiguous with the drives.
Does anyone know of a utility that I can use to fix my problem? I really don't want to reload everything from scratch.
Thanks,
Scott

You need to combine the libraries on one computer. Otherwise you'll be constantly erasing your iTunes content as you switch computers. iPhone will only sync or manually manage iTunes content with ONE computer at a time.

What is the keyboard shortcut to Expand a group?

I looked in the Motion manual and under keyboard shortcuts for layers it says;
To expand a group in the layers list is the right arrow key. To collapse a group in the layers list is the left arrow key
But it is not working. Am I doing something wrong?
Thanks

I just tried it and still not working. If I click on the group and push the left or right arrow it just moves the play head one frame at a time
Any other suggestions?

Is their any way to remove headers and footers in numbers 09?

Is their any way to remove headers and footers in numbers 09?

Hi Jeuker,
In Numbers 3.2, you can do lots of things with Page Headers and Footers in Print Preview. Move them to the (paper) edge - if your printer will handle that .
Then bring up the Fonts window (in Print Preview, Menu > Format > Fonts > Show Fonts) and have a play:
Or leave them blank. With zero position on the (paper) page, they will probably be in the non-printing margins anyway .
Regards,
Ian.

HT1349 I just purchased an Iphone and love it except I'm surprised and annoyed that there is no way to create a group within contacts. I coach a youth basketball team and routinely want to fire off a mass email or text to the same group. Am I missing som

I just purchased an Iphone and love it except I'm surprised and annoyed that there is no way to create a group within contacts. I coach a youth basketball team and routinely want to fire off a mass email or text to the same group. Am I missing something?

When I click on my contacts icon on my phone there is a Groups choice in the upper left hand corner. Make sure you are in All Contacts and not a specific person.

Is there a way to create a group function?

I want to create a group function like max,sum,count for a
pl/sgl function. This group function will be something like max
(let's call it max2) but it will return the second highest value
of a group.
Any ideas anyone?

Since you might not completely understand what i mean i give you
this example:
the ranktest table is:
A     B     C
a     b     1
a     b     1
a     b     5
a     b     12
a     b     7
b     c     1
b     c     3
b     c     2
b     c     4
b     c     8
c     d     4
c     d     3
c     d     6
c     d     1
c     d     2
c     d     12
c     d     7
c     d     3
a     b     5
c     d     12
SELECT A,B,C
FROM (
SELECT A,B,C, dense_rank() over (
PARTITION BY A,B
ORDER BY C desc) AS sorted_c
FROM ranktest a)
WHERE sorted_c = 2
-- this way we get the c column to have the 2nd highest value
-- for each set of A and B
--RESULT
a b 7
b c 4
c d 7
SELECT a.A,a.B, sum(a.C), count(a.C)
FROM ranktest a
GROUP BY a.A,a.B
-- this way we get the group functions to work on two of the
-- columns
--RESULT
a b 31 6
b c 18 5
c d 50 9
The result that i want is
a b 31 6 7
b c 18 5 4
c d 50 9 7
My question is can this be done in a single select statement. I
know it can be done with an intermediate step (of the creation
of a temp table).
Plus i would like to ask the experts, would a single select
statement be more efficient?
NOTE: the tables and data are just test data. The real tables
and data and the select query are different. The real ranktable
has about 1 million records. That's why i am worried about
efficiency.

Tree expand / contract not working when region copied...

Hi
I have a tree view region which I want to appear on each relevant page. Simple, thinks I, I'll copy the region from page to page... but when I do this then the expand / contract buttons don't work. If I create a new tree region then paste in the code from the tree region I want to copy all works well...
Using Apex version 4.0.0.00.46.
Anybody else seen this?
Steve

>
The existing page zero appears at the top of other pages, containing specific data. This Tree element only appears on the config pages and is on the left hand side of the page.
>
You've just caused me to make a discovery that I hadn't noticed in nearly 6 years of APEX use: Page Zero is assigned a page template! I've no idea why this is: I don't think it should; this template will have absolutely no effect on how the application is actually rendered so I therefore think we should ignore it and maybe it will go away...
Has the presence of a page template on Page Zero influenced your thinking on its use?
Understand that regions on Page Zero will not be rendered according to the Page Zero template, but according to the page template for the page they are included on. The region Display Points remain constant: if you assign the Tree element to region position 2 on Page Zero, and it's included on pages 6, 7 and 8, then it will appear in region position 2 on pages 6, 7 and 8. However, using page templates and CSS, region position 2 can be in completely different places on the screen on pages 6, 7 and 8 (and even be in different positions on the screen and on a printout from the same page...).
The other main thing about Page Zero is that the rendering of regions can be controlled conditionally, often using the Current page in Expression 1 condition, where a list of page numbers specifies which pages a region should be included on. So to make your Tree region only appear on Config pages 6, 7 and 8, set its Display Position to Region Position 2, and give it a Current page in Expression 1 condition with Expression 1 set to <tt>6,7,8</tt>. If the "existing page zero" elements appear on every page except 6, 7 and 8 then use the opposite Current Page not in Expression 1 condition...
Only very simple apps would tend to include all Page Zero regions on other pages in their entirety: most of the time there will be mix'n'match using conditional rendering.
>
Which raises yet another question (getting my 2 cents worth here!) - can we conditionally change the position of a region? eg if on app pages 1 thru 5 then page zero is at top. if on pages 6 thru 8 then appears on left side?
>
Hope I've managed to explain why that's not how it works?
(And reflecting on the mysterious presence of a template on Page Zero, I can only think that it has something to do with the Display Point preview pop-up, even though it's entirely useless as a safe guide to where the region will ultimately appear...)

I use a Pandigital Photlink one touch scanner. In order to get iphoto ro recognize the jpegs after loading them from an hd card onto the computer i have to 'save as' each one into documents and them 'open with' iphoto. Is there a way to do a group 'save

I use a Pandigital Photolink one touch scanner. Then I upload the pics from the hd card to the computer. In order to get iphoto to recognize the images I have to first save each photo using 'save as' to my documents, then 'open with' iphoto. Is there a way to do a group 'save as' and then open the group in iphoto?
Scanning this way is much faster than using my printer but having to save each individually defeats the purpose.
Thanks, Gailfromlangley

I use a Pandigital Photolink one touch scanner. Then I upload the pics from the hd card to the computer. In order to get iphoto to recognize the images I have to first save each photo using 'save as' to my documents, then 'open with' iphoto. Is there a way to do a group 'save as' and then open the group in iphoto?
Scanning this way is much faster than using my printer but having to save each individually defeats the purpose.
Thanks, Gailfromlangley

Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

* Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?

While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
~Deepak

Way to expand/contract group footers?

Similar Messages

Maybe you are looking for