Ways of Setting Bridge to Search a Particular Concept.

I'm setting up a grouping of photos to fit a certain concept, in this case, Chiaroscuro. So far, the only Metadata stored is default + my name and copyright.. So I started with known files fitting this description and used "Add to Favorites. Now this list is going to get (hopefully!) long so I started looking for a better way. One way is to identify the file in metadata under Intellectual Genre, and it worked. However, I wonder if there is a better way.
Basically what I want to be able to do is to go to Bridge or Windows Explorer enter the term in Search and have it fine all the files, no matter their folder and position in the computer.
I really don't mind doing the search manually at first, in fact it is mandatory. I know of no program that can look at a file and identify it as Chiaroscuro, but I sure can. So they can be grouped in Favorites, but then I need to grab the set called "Favorites" and land them somewhere called "Chiaroscuro". Just having a pointer will do and better than moving the file itself.
Maybe Lightroom is better. Or Explorer
I'm using CS6 on Win 7.
Thanks.
Lawrence

Adding to Favorites simply was a way to get a few together from different files on different drives so I could look at them together. I didn't have a name for the collection at first. I would rather not continue to do it that way.
In any case, I'll have to add the term "Chiaroscuro" to each file so I can call it up. It is not the files name, rather the Collection. All the dedicated folder needs to be is a collection of shortcuts.
The controlling factor is many images are stitched and the name then has no reference to the originals. Leaving the stitched in the folder with the components means I can find them again.
I'll figure out something.
I shudda been a librarian!

Similar Messages

Smart Folders - How do I set it to search one particular folder only?

I want to set up a Smart Folder that will basically do the following:
1: Look in folder called "Client Work".
2: Find files modified in the last 1 week.
That's it. Point 2 I can easily manage, but I can't figure out how on earth I am supposed to set the Smart Folder to only apply its searches to one particular folder on my hard drive? I really can't figure out which option under "Other..." I am supposed to be using.
I'm sure there must be a simple solution though -- can someone please tell me what it is?
Thanks!

On the locations bar in the Finder Search window (where it says Servers Computer Home Others...) pick others and navigate to (with the + button), or drag the folder you want in the window and make sure it is the only folder selected. You will then have another button on the location bar Folder "Client Work". Select that button and save the search as a Smart Folder.

How to set a customized search results template for all users

Hi.
I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
Thanks in advance.

I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
Here is the modification of the code:
<$if customTemplateId and not (baseTemplateId like customTemplateId)$>
          <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>
          
     <$else$>

          <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>

          <$columnsString=columnsString&",xComment"$>
          
     <$endif$>

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view?

I'm used to the way Finder display the folders on Mac(Column view). I would love, if its possible, to have the option to set the Folders window in Bridge to Column view:
Finder Column View:
Instead of Bridge List view:
Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

Any way to search a particular forum?

I suppose I should know this by now...
I can't find a way to search a particular forum.
I do see the "Search Communities" in the upper right, but it is too broad. Example: Right now I'm trying to search the Pages forum for information about the format sidebar in the new 5.0 version, but I'm coming up with threads from 7 years ago in unrelated topic areas.
Am I missing something?

Donnie Ashworth wrote:
How do I initiate the results from a particular forum? Other than by using the general search box in the upper right?
Donnie ~ Perhaps there's a better way, but this is how I do it...
Click on THIS and bookmark it as a general ASC search for future use. Then put an "x" in the search field and in the Restrict to a Community field, type in Pages and choose which Pages community to search and click Search. Then bookmark it as a Pages search for future use.

Is there any way to set a timer for particular playlist?

i would like to listen to a sleep playslist everynight without getting up to turn it on. is there any way to set it in advance?

this is not the problem. i know how to open iTunes when it starts up and to schedule the computer to shut down. what i want to is at 8 pm close all applications except iTunes, put the display to sleep and at 9 pm start playing a sleep playlist. i have been told many times not to look at the computer an hour before bed and i so i want to avoid having to look at it to start my go to sleep playlist.
i have looked at a number of programs but i don’t see one that does this yet.

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Adobe Bridge's search engine is not good at all. How Can I improve it?

Adobe Bridge's search engine is Horrible! Is there any plugins or setting tweaks to make the search engine better? When I search for "woosh" in bridge under my SFX folder it comes up with 10 results. When I do the same search using windows explorer it comes up with over 100 woosh sounds. And I'm searching the exact same location for both searches. I've noticed that if the file name is written "Woosh_17" or "Woosh17" or anything where there is no space after the key word, bridge will not find it. Is there anything I can do to make bridge's search engine work better?
I am using Bridge CC
Windows 7 64 bit

Unless your iPhone is jailbroken, there is no spyware on it. There is no way for spyware to be downloaded or installed. You don't really explain why you think you do. As far as I can see, the Fortinet app is just an app providing information about their services - it isn't performing any functions on the phone itself. Not clear what relevance you think the Norton security on your computer has to do with it.
You might want to do something about that bug that is extracting all the punctuation from your writing though.....

What is the best way of setting up Family Sharing?

I just bought my son an iPad Mini and I am trying to decide on what is the best way of setting it up for him. The one thing I do know is that I do NOT want all the content that is my iPhone 6 to pop up on his iPad Mini. I want his iPad to be used for his games and educational stuff and his own music. I don't mind setting up a family photo album and share photos with the family. So is the Family Sharing option the best way of doing this based on what I just mentioned? Do I set him up with his own Apple ID? If so will everything still be based off my account so he won't have to create his own iTunes Library?
I always use iTunes gift cards to purchase music and content. Will I be able to continue to use them even if I want to put some new content on his iPad and not my iPhone? Do I enter in his Apple ID info. Can you restrict certain family members to just certain things for example you only want to share photos with one person whereas you might want to share your music with another family member?
Any suggestions on the best way of setting this up would great!
Thanks!

Hi DVX100Shooter,
Congratulations on getting your son a new iPad, I am sure he will enjoy it.
Family Sharing is one way of managing both purchases and content between members of a related group of people. Each member must have their own Apple ID. You can choose what music you wish to share with the family from your own account. See this article -
OS X Yosemite: Share purchases with your family
In particular the section titled Hide a purchase from other family members
The music library on your son's iPad is separate from yours, but under Family Sharing you agree to pay for all purchases made through the iTunes store. If you wish to control what is purchased you can set up the Ask to Buy option for any family member under adult age in your location. See this article for details -
Request and make purchases with Ask to Buy - Apple Support
Gift cards may not be used for billing of purchases under family sharing, with the exception that a family member may use gift cards to purchase their own content. See this article for information about Family Sharing billing policies -
Family purchases and payments - Apple Support
The shared family photo album is available to all family members.
Family Sharing - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Is there any way to change the default search parameters in Mail?

When I do a search it only checks "Today" instead of "Inbox." So then I have to select Inbox and reenter my search. Not a huge deal, but a bit bothersome. Any way to just set it to search "Inbox" by default instead of "Today?"

No. You will see many posts about tinker tool ,but that wont change Adobe Apps fonts, only apple applications.

Is there a way to set the control panel in assistive touch?

I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

Best way to set-up U Verse, Time Capsule and Express to Extend Network

I'm trying to extend my WIFI signal with AP Express and TC using an AT&T U Verse router. Neither the Express nor the TC are directly connected to the U Verse router. Both the Express and the TC show they are connected to the network but when I try and edit the settings to extend the network rather than join the network they both show as not connected any longer. Before on DSL the Express and TC were connected as extending the network (slow but connected). The house is 3 levels U Verse in in the basement. Trying to get a connection on the 3rd floor. We have multiple iPads, iPhones, Mac Book Pro's, an i Mac and Direct TV receivers.
What's the best way to set this up to extend the range of what we have?

You cannot extend range from non-apple routers.
So both the TC and express will join the wireless of the uverse and then become dumb clients..
You need at least one of the two units plugged into the uverse by ethernet.. then the other device can extend that network.
Consider using EOP adapters if your distance is such that even with the correct setup you don't get the range you need. Or better still do it properly and wire it with ethernet.
It is possible to use the Express as a bridge..
So say setup on the first floor.. a wireless bridge from the express to the uverse.. then plug the ethernet into the TC.. and use the TC in bridge mode.. it will not be fast but it can work.
Reset everything to factory and start over.. as you will not be able to get this working without a full reset of the apple routers.
Note still not ideal but it might give you more range than extend wireless with say express plugged into the uverse.

Windows 8.1 Update always sets Bing as Search Provider (IEAK doesn´t tell it to)

Hello,
I´m building a Windows 8.1 (with Update 1)-Image for my Company and want to customize IE11. Everything works fine, beside two things:
1. In my IEAK-Package I add Google as search provider and set it to default. The IE-branding-package is applied during the building of the image. But when I log in the first time, IE comes up with Bing as default and Google as additional search provider.
First I thought this has anything to do with SCCM installing the branding pack as LocalSystem during the task sequence, but with some testing, I found out, that Win 8.1 Update 1 (KB2919355) was my Problem! If I install my branding package to Windows 8.1 (without
Update 1), Google is set as default search provider for accounts that already exist and for new accounts. When Update 1 is applied and my Branding pack runs after that, Google is set as default search provider for existing accounts only, but not for new accounts,
they get Bing! It doesn´t matter if I do that as LocalSystem within a task sequence or as local admin, with Update 1 - Bing, without - Google! I also tried to set the HKCU\Software\Microsoft\Internet Explorer\SearchScopes\DefaultScope-value in the "Default
User" and imported the {xxxx...xxxxx}-Search Provider-Value for Google, but this seems to be overwritten by some first logon command. Is there any Win 8.1 or IEAK-Hotfix to correct this behaviour?
2. This one is AFAIK in every IEAK since IE8, but it´s annoying anyway: you select that no MS Defaults should be added, and that only items created by the Administrator should be deleted, in the "Browsing Options" of IEAK but (in
the case of IE11) this one "Bing"-favorite resides there and says "Hello!" to every new user.
Problem 1 is the bigger one, but I´m glad about every kind of help and every answer!
Kind Regards, Chris

So it did. The settings are being customized by "ie4uinit.exe -UserConfig" during Active Setup for each new user. I could not find where it was picking up its orders, otherwise I would have edited the ieuinit.inf or registry or xml
file rather than attempt to undo the damage using the below method. Documentation on ie4uinit.exe was nonexistent or hidden, and I didn't have the patience to keep filtering and trawling through 7000 reg entries to find the source of the problem.
As a test, disabling / renaming / removing the "stubpath" fixed the problem, but also vanished the Metro IE icon. I didn't pursue this further to see if this was a simple fix, choosing instead to make things a little more complicated:
During the deployment task sequence, I create another registry key under "Installed Components" in Active Setup. I don't know if there's a way to control the order of execution, but I think I got lucky enough that my stuff executes after
the other commands per user.
Task script (during deployment):
REM Prep for active setup to undo 8.1 Update 1 Bing evilness
MD c:\temp\bingremove
XCOPY hklm_scope.reg c:\temp\bingremove
XCOPY hkcu_scope_current.reg c:\temp\bingremove
XCOPY RedoSearchScopes.cmd c:\temp\bingremove
REG.EXE import RedoSearchScopes.reg
RedoSearchScopes.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\RedoSearchScopes]
@="Redo IE Search"
"IsInstalled"=dword:00000001
"ComponentID"="REDOBING"
"StubPath"="C:\\temp\\bingremove\\RedoSearchScopes.cmd"
RedoSearchScopes.cmd
REM Clear & Add search links
REG.EXE delete "HKCU\Software\Microsoft\Internet Explorer\SearchScopes" /f
REG.EXE delete "HKLM\Software\Microsoft\Internet Explorer\SearchScopes" /f
REG.EXE import c:\temp\bingremove\hklm_scope.reg
REG.EXE import c:\temp\bingremove\hkcu_scope_current.reg
del /f /q %USERPROFILE%\Favorites\Bing.url
del /f /q %USERPROFILE%\..\Default\Favorites\Bing.url
hklm_scope and hkcu_scope_current are exports of searchscopes that I'm reasonably happy with. Except after
KB2988414, my users are prompted to approve my change away from the default of Bing, only once. So MS wins again, unless I go uninstall that update and block it - except it was part of a cumulative rollup!
Anyway, I don't even care that much about which search engine goes, but search suggestions were ON by default, which is a big nono when dealing with sensitive work. Search suggestions mean that all text in a browser address bar is logged and stored
by the search company.
A creative workaround I hadn't thought of was to keep the Bing GUID and change all the values underneath to your search engine of choice:
http://www.laurierhodes.info/?q=node/81
I was considering this, but it still feels a bit hacky, and I'm sure it would only be a matter of time before something breaks it.
Oh, well. Not the ideal solution, and I resent beyond words the inability to set something from an administrator's task and then have the OS second-guess me and undo my changes via an update meant to give more control to users who could not care less
about these "enable" or "approve" prompts.
Thanks for the tip, R.A.

Different ways of setting up a TC as a HD

I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........

You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug

How to set the color to the particular row in a report

Hi
I have a report in which I have an edit link(I changed the id as edit link)..When I click that link, all the details(the whole row details) will be appearing on the items nearer to the report to save the changes....
I want to set the color for the particular row when a link is clicked and the color should not be changed until I save the changes in items...After saving the changes, the report should come in the normal color...this is my requirement..i refered many forums regarding this...But could not find solution....If anyone knows,please help me...
Fazila

Here is how I would implement
Create renderer
Add SkinnableContainer element and create a skin for this container namely SkinnableContainerSkin
find the fill section in the skin
add bitmap fill to the fill section and give the source of the image which you are planning to use(Hopefully this is a direct way of doing, may be you need to hack this a little to get it to work)
I've never tried this, but should help you give some idea.

Ways of Setting Bridge to Search a Particular Concept.

Similar Messages

Maybe you are looking for