WBS assignement in Asset Master & postings Impact on business processes??

Hi all,
We have the option in asset master record to give the WBS element, so whenever we procure an asset we will procure it to a project so we planned to give wbs in asset master record.
we even calculate dep for the project. and we will transfer asset from one project to another.
by considering above all if we assign wbs in asset and procure it to project and calculate dep. does it leads to any other implications. we tested the above cycle its working fine, but we are unable to vizualise other impacts.
so somebody please guide us to goahead with this opttion.
thanks & regards,
shashi kanth.

Hi,
Typical use of this is to do a statistical posting to the WBS and a "real" posting to the asset.  It is a nice feature, as you can tell and report on your origins of assets by WBS. 
Good luck!
Tammy

Similar Messages

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • WBS element in Asset Master (Period Dependent Tab)

    Hi
    I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
    But the issue is that its grayed-out & i am not able to fill-in any data in it.
    Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
    Regards
    Ashwin

    hi,
    goto asset master screen layout and put tick mark under time dependent data.
    govind.

  • WBS Field in Asset Master Record

    Hi All,
    Currently we are working in 4.6 C version.
    The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
    The standard functionality is available in ECC6
    Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
    Regards,
    Nitin

    Hi
    @ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
    @ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
    Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
    I never worked on 4.6, but I guess WBS must be allowed for usage
    br, Ajay M

  • EQUIPMENT ASSIGNMENT TO ASSET MASTER RECORD

    Hi All:
    I am trying to assign the Equipment Number in the Asset Master Record but am not able to do so. Is it even possible, has anyone had any success with the configurations and can share them with me?
    I know that I can create the Equipment Number automatically when creating the Asset Master but what I need to do is to assign an existing Equipment Number to an existing or new Asset Master & the asset number will be reflected on the Equipment Master.
    Thanks and Regards
    Hisham

    What is the problem now?  Aren't you able to assign the Equipment number in the Asset master data?
    What is the error message?
    Well, just try this and see whether it works for you or not.
    IMG -> Asset Accounting ->  Master Data -> Automatic Creation of Equipment Master Records -> Specify Conditions for Synchronization of Master Data

  • SC-Cost Assignment Create Asset Master Button Hide

    Hi All,
    We are using SRM 5 SP013.
    We have a requirement to hide the 'Create Asset Master' Button under cost assigment tab ( when we select Asset) and to make the Asset class field display mode..
    I used the BADI BBP_UI_CONTROL_BADI ( method BBP_SC_UI_CTRL). For hiding , I used the field ASSET_BUTT and for Asset class, I used the field GS_ASSET_C-ASSET_CLASS.
    But nothing worked out.
    Could you please help me? Am I in right direction or missing something.
    Regards,
    Nikhil

    Hi,
    You are certainly using the right BADI and field name.
    In the BADI, you should set the export parameter as CV_INVISIBLE = 'X' (i.e. invisible) and CV_INPUT_READY= ' ' (i.e. display) for the 2 fields as required. And also activate the BADI.
    If nothing works still, report to SAP support.
    Regards.
    YS

  • Substitution of Account Assignment from Asset Master Data

    Hi Gurus,
    System is not picking up cost center master data in FI document posting in the following scenario:
    Posting in Asset through a transaction type which only post to non leading ledger, cost center is not getting populated in the FI document posted.
    For the above issue, I have tried creating a substitution rule with a user exit, but system is not calling this substitution at all - Possible reason being the posting only in loacal ledger and fuction many not available for substituion to work in this situation. I may be wrong but looking at the system behaviour it is not calling the substition at all. I had activated total trace of the substitution but no substitution was called in this case.
    In view of the about your expert advise is needed. I try checking BTE available for such situation but did not have any success yet. Any brilliant idea is welcome.
    Thanks in advance for your help!!!

    hi Murlidhar Khatri ,
    we use cost center assignment in our country, also. please use sap note 940758. when you use that sap note, you will send deppreciation costs to cost center which asset is assgined in master data.
    sap note 940758:
    In Asset Management it is only possible to enter one depreciation account for each asset class. However, depreciation should be posted to different functional accounts for the same asset class depending on the category of the cost center on the master data of the asset.
    the link is :
    [https://websmp101.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=940758&_NLANG=E]
    best regards.

  • WBS Assignment for Asset Error

    Dear Experts,
    In CJ03 transaction, checking the WBS data i found error in viewing of assigned asset.
    the Error Message showing "Data for asset view 0 is missing" in the tab of Asset under construction. i didnt understand and i checked the asset and found the asset is ok. kindly provide me a solution for this message.
    Thanks in advance,
    Raghav
    Edited by: Raghav K on Sep 12, 2008 8:34 AM

    Hi Satish,
    I am using the ECC6.0, so is this valid for my version?
    Thanks for the fastest reply also.
    Thanks and Regards,
    Raghav

  • WBS element in Asset master & investment order

    hi,
    till now we are using the capital investment order for capitalising assets, but now the client is asking for settling wbs element on to auc, can we have both WBS elment and investment order for a single asset. does any one have img document for wbs element related config.

    Hi Sai,
    I think I can answer part of your question.  If a posting is being made to wbs element and internal order (both are real).  The real posting goes to wbs element and statistical posting goes to internal order.
    In this case, you will be settling the wbs element to the AUC rather than Internal Order.
    Coming to the configuration, most of the configuration settings are same on Internal Orders / WBS elements.
    I am sorry, I do not have any documentation.
    Regards,
    Sreeni

  • Asset Master-Old WBS to NEW WBS

    Hi All,
    Is there any programme or t.code to replace to old WBS to NEW WBS in the Asset Master data.
    Is there any LSMW programme for the same?
    Thanks
    Chinna

    hi
    In SAP Standard there is no LSMW for this requirement. you to create your custom development

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • Update asset master record serial number (ANLA-SERNR) when doing GR

    Hi gurus,
    The client has a requirement to update the serial# on an asset master record when the user process goods receipt through MIGO.  I've looked at the functional side to find a solution for this but I have not found any.  Is there a BADI or another functionality that we can use to update the serial# on an asset master record upon GR?
    Thanks

    Dear Camb
    Did  you  find  a  solution  for this issue?

  • Update asset master record serial number when doing GR

    Hi,
    The client has a requirement to update the serial# on an asset master record when the user process goods receipt through MIGO. Is there a BADI or another functionality that we can use to update the serial# on an asset master record upon GR?
    Thanks,
    Bhushan Gulyani

    Dear Camb
    Did  you  find  a  solution  for this issue?

  • How transfer asset master balances

    how transfer asset master balances. please explain details process.

    Use ABUMN or
    ABT1N
    based on ur requirement.
    for documentation.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/17/1d3c3934f18443e10000000a114084/frameset.htm
    if open points please raise..
    Regards
    Anantha

  • What is maintanence level in  screen layout for asset master record

    hi everyboby,
    can anyone explian this
    when I'm defining screen layout for asset master record to  make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
    thanks
    siri

    hi..
    thanks for reply again.
    If i select  business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same  error msg.Anyway  i can create asset master now.thanks
    regards
    siri

Maybe you are looking for

  • Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

    Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

  • Wont print from printer friendly page

    i'm having trouble printing my printer friendly confermations from the state and goverment web sites. no problem just plain printing   when go to printer friendly page it want print

  • 9iFS: import multiple files with common attributes

    Hello, Customer wants to apply attributes to a set of contributed documents, all at once. They also want to recursively apply partial attributes to sets of folders / documents. Did I miss this fundamental feature? Does it require customization?

  • Q&A interview with Steve Muench published

    Steve Muench has been kind enough to allow me to web-publish a Q&A interview with him that I wrote and was published in 2006 AUSOUG Summer Foresight magazine edition. The article has been published here for your reading pleasure: http://one-size-does

  • Path tool

    hi, i'm from germany sorry for my bad english... but i will try to explain my problem. well, i draw a bezir line (path) in inkscape, because its more easy to use and saves a lot of time for me then the beziertool in illustrator. than i saved it as an