WBS element field blank in MB51 report.
Dear Experts,
I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
Neeru
Anyone please...
Neeru Dimri
Similar Messages
-
WBS element field to Depreciation Simulation Report output display
Hi SAP Experts,
We need to Add the WBS element field to Depreciation Simulation Report output display (S_ALR_87012936)
Could please give your valuable inputs
Thanks
Hari PothulaHI Javed,
We have capitalized with WBS element but not displaying in simulation report.
All configurations done in in ACSET and activation Account assignment objects
Thanks
Hari -
WBS element field mandatory for specific sales order
Hi Friends,
I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
RatnaHi,
As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
Hope this will resolve ur problem.
rgds
Dhiraj -
Need Profit Centre,WBS element fields in Customer/Vendor Line item display
Dear Experts,
In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
Can anyone help me with the solution.
Thanks in advance.
Regards,
Abdur RafiqueI have used User exit, to obtain the above scenario.
-
WBS element field in the customer line item
Hi Experts
Clientu2019s requirement is to populate the WBS element in the customer line item.
Field status of Posting key -01 for WBS element is u2013 Optional
Field status of Customer recon a/c for WBS element is u2013 Optional
Still in the customer line item screen, the WBS element field is hidden.
Kindly advise how to make the field WBS element available in the customer line item.
Regards,
PurnimaHello,
When you post customer invoice, screen no 301 is active. Here you can find only fields like payment terms.baseline date,payment block etc.
As this is not a cost object you will not find cost center, wbs element. You could find them on credit item.
Regards,
SK -
Add a WBS Element into a WBS Element Group starting from a report
Hi,
I'd like to know if it is possible to add a WBS Element into a WBS Element Group starting from a report as like it possible for Cost Centers in report obtained by TC KS13
Thanks
GiovannaHi,
Did you try CJSG / KJH2.
Regards
Sreekanth -
WBS element field in SO for milestone billing
Hi,
I am using Milestone billing. When I am trying to create the Sales order the WBS element field is greyed out. Pleae advise.
Regards,
SantanuHi Shantanu,
I think you need to remove the assignment of the requirement type KE from your item category. I gues you are using TAO as the item category for Milestone.
You go to Sales and DistributionBasic FunctionsAvailability Check and Transfer of RequirementsTransfer of RequirementsDetermination Of Requirement Types Using Transaction.
Hope it helps.
Shivaji.
Edited by: Shivaji Paul Choudhury on Mar 2, 2009 4:21 PM -
Which PO and PR table can be used to get the WBS element field.
Which PO and PR table can be used to get the WBS element field. Thanks.
HI,
In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
It shall be checked from EKKO table with PS_POSI feld.
The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
Hope this helps.
Regards,
Prasanna
Award pls if helpful. -
Adding f4 help to wbs element field in account assignment tab of me21n
My requirment is to create f4 help for wbs element field in account assignment tab of me21n,
I have to pick wbs elements according to plant and storage location assigned in item overview of purchase order.
for that i have created a ztable. and use it in f4 code, or help me if any other suggestion u have.
thanks,
Amol.Try to use screen-exit for assigning the serach help. There is one screen exit for PO ..
Check the enhancement - MM06E005 ,
Create project in cmod and use this enhancement.
use the PROCESS ON VALUE-REQUEST event and use FM 'F4IF_INT_TABLE_VALUE_REQUEST'
hope this will resolve the issue.
anya -
How to keep wbs element field in display mode in me22n?
Hi all,
Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?Hi Dhruv,
You can implement BADI ME_PROCESS_PO_CUST and implement the method FIELDSELECTION_ITEM.
I have pasted the SAP documentation available below. Please try this.
Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
At header level FIELDSELECTION_HEADER_REFKEYS
Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
At item level FIELDSELECTION_ITEM_REFKEYS
Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
Documentation for BAdI method FIELDSELECTION_HEADER
Documentation for BAdI method FIELDSELECTION_ITEM
Special Field Selection Item
Functionality
The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
Parameters
The following parameters are available:
IM_HEADER - Document header
The interface reference is of the type IF_PURCHASE_ORDER_MM.
IM_ITEM - Document item
The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
CH_FIELDSELECTION - Fiele selection table
By making changes to this table, you can influence the display properties of a field.
This table consists of value pairs <METAFIELD|FIELDSTATUS>.
The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
Through this abstraction, reference can be made to business contents on a uniform basis.
Standard metafields are defined in the type group MMMFD.
The field selection status has four possible instances:
'-' Field is suppressed
'*' Field is purely a display field
'.' Input field
'+' Mandatory field
Notes
Under no circumstances make any changes to the database within this method. On no account use Commits.
For WBS element the meta filed no is 512.
mmmfd_wbs_element TYPE mmpur_metafield VALUE 512.
In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
DATA: l_persistent TYPE mmpur_bool.
l_persistent = im_ITEM->is_persistent( ).
READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
IF sy-subrc IS INITIAL.
<FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
ENDIF.
Try this, it should work.
Regards,
Savitha
Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM -
How to make WBS element field in Notification a mandatory.
How to make WBS element field in Notification a mandatory.
Should I use USer Exit.
In cutomization I didnt find ant standard customizationHi,
If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
For Notification i am not sure whether this field is ther , but anything u can perform checkings via
QQMA0014 QM/PM/SM: Checks before saving a notification
Alternatively u can also explore via Transaction variant SHD0 ..
regards
pushpa -
In f-02 GL item fast entry i need to add WBS element field
Dear All,
In GL item fast entry screen f-02, I need to add one field WBS element.
Please help me how to add the WBS element field in upload fast entry.
Best Regards,
Venkat.Dear,
Use transaction O7E6 to add WBS Element into your variant.
You can find your variant which is assigned in FB00.
Regards,
Chintan Joshi -
WBS element in Material Document List Report
Hi Guru,
I have a problem about WBS element which is not show up any data in Material Document List (MB51) movement type 281 and 281 Q event I add WBS in the document. Anyone know how can i config or do anything to let the system show up, please let me know.
Thanks in advance.Hi,
Go to SPRO > MM > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here for Program Name "RM07DOCS", Table "MSEG" add field "MAT_PSPNR" (Valuated Sales Order Stock WBS Element) and activate "Output" indicator.
And Then check in MB51 -
WBS element field in transaction CS71-F4 help is not working in ECC 6.0
Hii
In SAP, while working in SAP 4.7, tcode cs71, WBS element is coming via F4 Help. But after upgradation to ECC 6.0 EHP 5, this F4 help is not working. I can enter value manually.but F4 help is not working.
Please Help.Hi,
You can do it manually too
1. Choose function group 'CSDI' via Transaction SE80.
2. Choose screen '0260'in the 'Screens' area and switch to change mode
3. Choose the 'Element list' tab index.
4. In this area, choose the 'Reference' tab index and enter the value
'PRP' in the 'Search help' column in the line for field
'RC29N-PSPNR'.
5. Save your change and regenerate the screen.
6. The correct input help for the WBS element is now available in the
initial screen of Transaction CS71/72/73.
I hope F4 helps works for "Existing WBS BOM's" in CS71 after this
Refer to Note : 714824 as well , it has reverted back the changes done by note : 422265
Regards
Gaurav -
Hi All
How can we make the WBS Element in ME22N transction in display mode.
our purpose is user not to change the WBS element in ME22N
Please give me solutionsYou can control using transaction OME9 for a/c category P for project and make project as display but it will be display in creation mode also.
so if you have specyfic to change mode than use user exit MM06E005 to control the field in change mode
Maybe you are looking for
-
Create additional installer error code -12 file not found from device driver cd
I'm trying to build an installer for a project that includes several NI drivers - specifically NI-DMM. NI-SCOPE, NI-SWITCH, NI-845x, and a few others (MAX, DAQ, etc). When I build the software standalone (and only include the run-time engine), it wor
-
I am trying to save directly to iPhoto from Facebook and when I click down load it goes to the downloads and opens in Preview and if I move it from there to iPhoto is still has the preview border. I did find a way to download to my documents and mov
-
I want to send a value from JSP file to another JSP file without..
I want to send a value from one.JSP file to another two.JSP file without to show the content HTML of the one.JSP in two.JSP (with include), only take the values processed in a Bean : =================== Bean package pck; import java.io.*; public clas
-
Standardise page sizes in merged PDF?
Hi everyone, I'm trying to merge together a PowerPoint '07 and an Excel '07 file, both set to A4 lanscape page layouts, in Acrobat 9 Standard. However, in the final merged PDF, the old Excel pages are huge compared to the PowerPoint slides - about 6
-
Can I combine two partitions without losing data on one?
So if I have two partitions on one hard drive can I combine them without losing the data that is on one of them? If not, could I just do a time machine backup, combine the two partitions, and then restore the time machine backup? Would that work?