WBS element field to Depreciation Simulation Report  output display

Hi SAP Experts,
We need to Add the WBS element field to Depreciation Simulation Report  output display (S_ALR_87012936)
Could please give your valuable inputs
Thanks
Hari Pothula

HI Javed,
We have capitalized with WBS element but not displaying in simulation report.
All configurations done in in ACSET and activation Account assignment objects
Thanks
Hari

Similar Messages

  • Need Profit Centre,WBS element fields in Customer/Vendor Line item display

    Dear Experts,
    In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
    I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
    Can anyone help me with the solution.
    Thanks in advance.
    Regards,
    Abdur Rafique

    I have used User exit, to obtain the above scenario.

  • WBS element field blank in MB51 report.

    Dear Experts,
    I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
    Neeru

    Anyone please...
    Neeru Dimri

  • WBS element field mandatory for specific sales order

    Hi Friends,
    I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
    Ratna

    Hi,
    As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
    Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
    Hope this will resolve ur problem.
    rgds
    Dhiraj

  • Depreciation Simulation report does not show future years Depreciation

    Hi experts
    Depreciation Simulation report (S_ALR_87012936) does not show future years simulated depreciation for depreciation areas other than 01.  I try to run for 7 years in future, other then area 01, all other areas only show the current fiscal year and zero for future years even though there are values.
    Any ideas would be much appreciated.
    Edited by: AG on May 5, 2011 1:21 AM

    Hi
    Please check settings of Simulation Varinat at IMG> Financial Accounting>Asset Accounting>Information System>Define Simulation Variants for Depreciation Reports. Check settings for depreciation ares for which you are facing issue.
    Hope this helps!!
    Murlidhar Khatri

  • WBS element field in the customer line item

    Hi Experts
    Clientu2019s requirement is to populate the WBS element in the customer line item.
    Field status of Posting key -01 for WBS element is u2013 Optional
    Field status of Customer recon a/c  for WBS element is u2013 Optional
    Still in the customer line item screen, the WBS element field is hidden.
    Kindly advise how to make the field WBS element available in the customer line item.
    Regards,
    Purnima

    Hello,
    When you post customer invoice, screen no 301 is active. Here you can find only fields like payment terms.baseline date,payment block etc.
    As this is not a cost object you will not find cost center, wbs element. You could find them on credit item.
    Regards,
    SK

  • Add a WBS Element into a WBS Element Group starting from a report

    Hi,
    I'd like to know if it is possible to add a WBS Element into a WBS Element Group starting from a report as like it possible for Cost Centers in report  obtained by TC KS13
    Thanks
    Giovanna

    Hi,
    Did you try CJSG / KJH2.
    Regards
    Sreekanth

  • WBS element field in SO for milestone billing

    Hi,
    I am using Milestone billing. When I am trying to create the Sales order the WBS element field is greyed out. Pleae advise.
    Regards,
    Santanu

    Hi Shantanu,
    I think you need to remove the assignment of the requirement type KE from your item category. I gues you are using TAO as the item category for Milestone.
    You go to Sales and DistributionBasic FunctionsAvailability Check and Transfer of RequirementsTransfer of RequirementsDetermination Of Requirement Types Using Transaction.
    Hope it helps.
    Shivaji.
    Edited by: Shivaji  Paul  Choudhury on Mar 2, 2009 4:21 PM

  • Which PO and PR table can be used to get the WBS element field.

    Which PO and PR table can be used to get the WBS element field. Thanks.

    HI,
    In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
    It shall be checked from EKKO table with PS_POSI feld.
    The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Adding f4 help to wbs element field in account assignment tab of me21n

    My requirment is to create f4 help for wbs element field in account assignment tab of me21n,
    I have to pick wbs elements according to plant and storage location assigned in item overview of purchase order.
    for that i have created a ztable. and use it in f4 code,  or help me if any  other suggestion u have.
    thanks,
    Amol.

    Try to use screen-exit for assigning the serach help. There is one screen exit for PO ..
    Check the enhancement - MM06E005 ,
    Create project in cmod and use this enhancement.
    use the PROCESS ON VALUE-REQUEST event and  use FM 'F4IF_INT_TABLE_VALUE_REQUEST'
    hope this will resolve the issue.
    anya

  • How to keep wbs element  field in display mode in me22n?

    Hi all,
    Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?

    Hi Dhruv,
    You can implement BADI ME_PROCESS_PO_CUST  and implement the method FIELDSELECTION_ITEM.
    I have pasted the SAP documentation available below. Please try this.
    Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
    In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
    At header level FIELDSELECTION_HEADER_REFKEYS
    Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
    At item level FIELDSELECTION_ITEM_REFKEYS
    Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
    You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
    Documentation for BAdI method FIELDSELECTION_HEADER
    Documentation for BAdI method FIELDSELECTION_ITEM
    Special Field Selection Item
    Functionality
    The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
    Parameters
    The following parameters are available:
    IM_HEADER - Document header
    The interface reference is of the type IF_PURCHASE_ORDER_MM.
    IM_ITEM - Document item
    The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
    CH_FIELDSELECTION - Fiele selection table
    By making changes to this table, you can influence the display properties of a field.
    This table consists of value pairs <METAFIELD|FIELDSTATUS>.
    The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
    Through this abstraction, reference can be made to business contents on a uniform basis.
    Standard metafields are defined in the type group MMMFD.
    The field selection status has four possible instances:
    '-' Field is suppressed
    '*' Field is purely a display field
    '.' Input field
    '+' Mandatory field
    Notes
    Under no circumstances make any changes to the database within this method. On no account use Commits.
    For WBS element the meta filed no is 512.
    mmmfd_wbs_element     TYPE mmpur_metafield VALUE 512.
    In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
    field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
    DATA: l_persistent TYPE mmpur_bool.
    l_persistent = im_ITEM->is_persistent( ).
    READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
    IF sy-subrc IS INITIAL.
      <FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
    ENDIF.
    Try this, it should work.
    Regards,
    Savitha
    Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM

  • How to make WBS element field in Notification a mandatory.

    How to make WBS element field in Notification a mandatory.
    Should I use USer Exit.
    In cutomization I didnt find ant standard customization

    Hi,
         If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
    For Notification i am not sure whether this field is ther , but anything u can perform checkings via 
    QQMA0014 QM/PM/SM: Checks before saving a notification
    Alternatively u can also explore via Transaction variant SHD0 ..
    regards
    pushpa

  • In f-02 GL item fast entry i need to add WBS element field

    Dear All,
    In GL item fast entry screen f-02, I need to add one field WBS element.
    Please help me how to add the WBS element field in upload fast entry.
    Best Regards,
    Venkat.

    Dear,
    Use transaction O7E6 to add WBS Element into your variant.
    You can find your variant which is assigned in FB00.
    Regards,
    Chintan Joshi

  • Bold font in report output display

    Dear All,
    Will any one let me know how to set BOLD font in the report output display?
    Thanks,
    Ranjan

    <b>u cannot use this in 4.7</b>
    REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
    Start of print-control
    NEW-PAGE PRINT ON.
    PRINT-CONTROL FUNCTION 'SF000'.
    WRITE: / 'This is CPI 20'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF020'.
    WRITE: / 'This is CPI 6'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF008'.
    WRITE: / 'This is CPI 12'.
    Depending on your SAP printer device, this may also work
    PRINT-CONTROL FONT 1 LPI 6.
    you can try to change font and LPI numbers
    WRITE: / 'font 1 lpi 6'.
    PRINT-CONTROL FONT 2 LPI 6.
    WRITE: / 'font 2 lpi 6'.
    PRINT-CONTROL FONT 3 LPI 6.
    WRITE: / 'font 3 lpi 6'.
    End of print-control
    NEW-PAGE PRINT OFF.
    *--- End of Program

  • WBS element in Material Document List Report

    Hi Guru,
         I have a problem about WBS element which is not show up any data in Material Document List (MB51) movement type 281 and 281 Q event I add WBS in the document.  Anyone know how can i config or do anything to let the system show up, please let me know.
         Thanks in advance.

    Hi,
    Go to SPRO > MM > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here for Program Name "RM07DOCS", Table "MSEG" add field "MAT_PSPNR" (Valuated Sales Order Stock WBS Element) and activate "Output" indicator.
    And Then check in MB51

Maybe you are looking for