WBS element in Asset master & investment order

hi,
till now we are using the capital investment order for capitalising assets, but now the client is asking for settling wbs element on to auc, can we have both WBS elment and investment order for a single asset. does any one have img document for wbs element related config.

Hi Sai,
I think I can answer part of your question.  If a posting is being made to wbs element and internal order (both are real).  The real posting goes to wbs element and statistical posting goes to internal order.
In this case, you will be settling the wbs element to the AUC rather than Internal Order.
Coming to the configuration, most of the configuration settings are same on Internal Orders / WBS elements.
I am sorry, I do not have any documentation.
Regards,
Sreeni

Similar Messages

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • WBS element in Asset Master (Period Dependent Tab)

    Hi
    I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
    But the issue is that its grayed-out & i am not able to fill-in any data in it.
    Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
    Regards
    Ashwin

    hi,
    goto asset master screen layout and put tick mark under time dependent data.
    govind.

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • WBS Elements and Asset Under Constructions have different Cost Centers

    Hello Experts,
    We have created a WBS element in one of the projects.
    As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
    These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
    I have checked the settings like automatic account assignment, etc but all settings look correct.
    Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
    Thanks in advance
    Leena

    Thanks for your replies...
    @ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
    @ Abdul - Please elaborate more on Validation and Substitution.
    Regards,
    Leena.

  • WBS Field in Asset Master Record

    Hi All,
    Currently we are working in 4.6 C version.
    The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
    The standard functionality is available in ECC6
    Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
    Regards,
    Nitin

    Hi
    @ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
    @ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
    Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
    I never worked on 4.6, but I guess WBS must be allowed for usage
    br, Ajay M

  • Report: Statistical WBS elements with assets assigned to them - actual cost

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Hi
    There is not a standard report which can cater to your requirements. You need to develop one.
    You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
    Regards

  • Statistical WBS element posting - Asset

    Hi,
    From the SAP help on AS03 transcation field on Origin tab >Account Assignmnet for investment  - WBS element  , I see the following information.
    WBS element investment project
    Enter the WBS element here, if the system should automatically make statistical postings of the transactions on this asset to this WBS element.
    You can specify in the Customizing definition of the transaction types, whether statistical automatic posting should take place for certain transactions.
    But I am unable to find a setting in the transaction type which allows the statistical postings on the WBS element , when we are posting to the asset.
    We have a requirement to post statistical postings to WBS element when posting to the asset and we thought of using this funtionality but unable to find the setting which allows the statistical postings on the transaction type.
    If anyone knows how to make this setting , could you please share with me.
    Thanks
    Vara Prasad

    Hi Markus,
    Thanks for your response.
    Even with the OSS note I am unable to find how to change the asset accounting transaction types allowed for statistical postings to WBS elements.
    I am aware of other steps in the configuration except this setting, could you please let me know if you have any idea on this setting specifically.
    Regards
    Vara Prasad

  • WBS assignement in Asset Master & postings Impact on business processes??

    Hi all,
    We have the option in asset master record to give the WBS element, so whenever we procure an asset we will procure it to a project so we planned to give wbs in asset master record.
    we even calculate dep for the project. and we will transfer asset from one project to another.
    by considering above all if we assign wbs in asset and procure it to project and calculate dep. does it leads to any other implications. we tested the above cycle its working fine, but we are unable to vizualise other impacts.
    so somebody please guide us to goahead with this opttion.
    thanks & regards,
    shashi kanth.

    Hi,
    Typical use of this is to do a statistical posting to the WBS and a "real" posting to the asset.  It is a nice feature, as you can tell and report on your origins of assets by WBS. 
    Good luck!
    Tammy

  • How to find WBS element total asset value

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

  • Report:actual costs:statistical wbs elements and assets assigned to them

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Thanks for your reply but this is not the question.
    The question is:
    Example:
    I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
    I post lot of invoices in each asset.
    I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
    Thanks and regards,
    Miguel

  • WBS Element in HR Master Data

    Dear Friends,
    I have a problem relating to WBS assignment as follows:
    When a new project is created in PS, some of the existing employees will be assigned to New WBS in PS. I am able to see the list of the employees assigned to the particular WBS. But, not able to locate where/in which table it is stored. I guess somewhere in Master data of individual employee, it will be reflected. ( Not on 0027 as we r not going to create WBS in IT0027).
    Can any one tell me how to find this change in employee master data. Does it require any configuration in SPRO. If so, pls. explain.
    Thanks in advance
    Regards

    Hi Manoj,
    We are trying for integration with Project System(PS). In PS , New WBS element will be created & required no. of Employees will be assigned to this new WBS. Employees who are choosen for New WBS will be in some other WBS till that date. It is like Org. Assignment.
    After this change, it is reflecting in PPMS (OM). But there will not be a record showing complete history of an employee, i.e.record showing different dates in different WBS.
    What I want is, when an employee is assigned to new WBS in PS, it should be reflected in his master data.That means, the earlier record should be delimited & new record should be created Dynamically.
    Hope you understand the scenerio.
    Regards

  • Selecting wrong WBS element while preparing the Purchase Order

    Hi Gurus
    We want to check the data while end user input it in the system.
    While preparing the the PO in the sysetm we input the plant id,storage location and WBS element.
    End user may select wrong WBS element of project under with plant. I want to prevent it.
    How can I prevent end user for selecting wrong WBS element under plant and storage location.
    Atul Kulkarni

    HI,
    You need to some developement...create Z table and maintain  the entries with the cobinations in what way you want to restrict and call the same in the PO.
    Hope it will works.
    Kuber

  • Assiging wbs element as settlment receiver in service order settlement

    Hi PM CS Experts.
    We are using scenarios of creation of service order from sales order. So whatever cost we incurred for service order settling to sales order via settlement rule - settlment receiver is Sales order i.e. SDI. We are using settlement profie XX which have default object type for settling SDI.   While releasing the service order the settlement rule created with settlement receiver is SDI.
    Now for different business scenarios, we are settling service order cost to WBS. Now we want to create a settlemetn rule for WBS, settlement receiver will be WBS element,  while saving the service order.  What configuration, master data or processes we have to follow for this.
    please reply on this.
    regards
    abhay

    Sales Order line item have account assignment WBS element. From this sales order line, a service order will be created.   So our idea is whatever cost booked to service order should be settled to wbs element instead of sales order.  
    also in location tab of service order, the wbs element from sales order is not inherrited in account assignment section.  Why this we are not knowing. Have you have any idea for this.
    regards
    abhay

  • Internal orders to WBS Element

    Hi,
    I,m working in a Project System implementation project, where all other modules are already in use.As per the existing process, Internal orders are created for asset accounting.Those are of statistical. All the purchase orders & costs are booked referring to the internal orders, the same cost is directly settled to Asset Under Construction or Asset.As the internal orders are created as statistical, there is no seperate settlement process & all the costs are directly settled either in AUC or in Asset as & when they are incurred(posted).
    Now as we are implementing Project Systems, Internal orders are going to be replaced by WBS Elements. Customer requirement is the same process of online settlement of costs to Assets from WBS Element & he doen't want to settle seperately.
    Now the issue is, 1) how the process can be mapped in SAP?
    I feel creating the WBS elements as statistical, the same process can be mapped. Is it possible/
    2) As one project is already in progress & some postings have been taken place against internal orders, customer wants to see all those postings on new WBS element, now how to migrate the same to respective WBS element in the new system?
    Thanks
    Kishore

    Hi Kishore Ji,
    For your question, simple answer is, you want to continue all AUC under Project Systems.  So far, you have considered statistical internal orders, anyway, which is not possible for you to settle directly.  So, please take that amount generate uploading document by using same account and using WBS element as debit and internal order as credit and status you release for internal orders.
    WBS elements you create as statistical without selecting account assignment category.
    Your problem will be solved.
    Assign points without fail.
    ALL THE BEST.

Maybe you are looking for

  • Error while creating a section in bcc

    i have to create a section below promotions and coupons... foorepository.. but i am getting an error when i when i select the subsection.. 15:39:40,314 INFO [STDOUT] [BlazeDS][ERROR] [Message.General] Exception when invoking service 'remoting-service

  • Printing problems with CP1515n and CM1312

    I can see from the forum that a lot of people are having problems with printing. My HP CP1515n wouldn't print properly with my new iMAC. Through a lot of complaining to PC World and to Apple we got a resolve with PC world. However my HP CM1312 printe

  • Create Location in owb 10.2.0.4.

    My repository is in version 10.2.0.4 and I want to connect to a sorce in version 11.1, is giving the following message: rct-5318 invalid location type pair for name oracle database and version

  • Pages to component to create Media Player Flip

    Hi Everyone... I'm creating my portfolio using Catalyst and have a question.  I have buttons (thumbnail of art work) that when rolled over, shows a larger image in a central location. In another project I created a media player to play each media typ

  • HT204387 My iphone and ipad can see each other on bluetooth but can't connect

    When I touch to connect, I get an error that reads 'make sure the iphone is turned on and in range". I can see the bluetooth connection on both devices, they just won't connect. I have turned off wifi on both devices. I have also tried connecting to