WBS Element in HR Master Data

Dear Friends,
I have a problem relating to WBS assignment as follows:
When a new project is created in PS, some of the existing employees will be assigned to New WBS in PS. I am able to see the list of the employees assigned to the particular WBS. But, not able to locate where/in which table it is stored. I guess somewhere in Master data of individual employee, it will be reflected. ( Not on 0027 as we r not going to create WBS in IT0027).
Can any one tell me how to find this change in employee master data. Does it require any configuration in SPRO. If so, pls. explain.
Thanks in advance
Regards

Hi Manoj,
We are trying for integration with Project System(PS). In PS , New WBS element will be created & required no. of Employees will be assigned to this new WBS. Employees who are choosen for New WBS will be in some other WBS till that date. It is like Org. Assignment.
After this change, it is reflecting in PPMS (OM). But there will not be a record showing complete history of an employee, i.e.record showing different dates in different WBS.
What I want is, when an employee is assigned to new WBS in PS, it should be reflected in his master data.That means, the earlier record should be delimited & new record should be created Dynamically.
Hope you understand the scenerio.
Regards

Similar Messages

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • WBS element in Asset Master (Period Dependent Tab)

    Hi
    I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
    But the issue is that its grayed-out & i am not able to fill-in any data in it.
    Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
    Regards
    Ashwin

    hi,
    goto asset master screen layout and put tick mark under time dependent data.
    govind.

  • WBS element in Asset master & investment order

    hi,
    till now we are using the capital investment order for capitalising assets, but now the client is asking for settling wbs element on to auc, can we have both WBS elment and investment order for a single asset. does any one have img document for wbs element related config.

    Hi Sai,
    I think I can answer part of your question.  If a posting is being made to wbs element and internal order (both are real).  The real posting goes to wbs element and statistical posting goes to internal order.
    In this case, you will be settling the wbs element to the AUC rather than Internal Order.
    Coming to the configuration, most of the configuration settings are same on Internal Orders / WBS elements.
    I am sorry, I do not have any documentation.
    Regards,
    Sreeni

  • Report Painter - Add PS master data columns

    Dear Experts,
    I created new reports for Project System via the transaction CJE2 .
    I will wish now create columns containing master datas of the PS objects :
    For definition of the project, WBS Elements and networks
    - Start date, end date
    - Person responsible
    - Applicant no
    - System or user status ...
    These elements are currently only available individually via GOTO menu -> display master data but we wish know if it is possible to put it on colums (for export by excel, HTLM, ...)
    Thanks for your assistance.
    herieric

    Hi Sreekanth,
    Thanks for your answer.
    I know that we can found these informations via CN41N or CN43N and export it to Excel, but I try to put these informations in colums in my Report Painter. Can you say me if it is possible ?
    Thanks for your assistance.
    Regards.
    herieric

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • Plan and Actual at WBS Elements without activities

    Hi Experts,
      I am in need of a small help from you. My scenario is like this:
    I have equipments/material as WBS Elements( Level1,2...). I have no activities/materials.
    I planned the costs using CJ40 and Budgeted using CJ30 and confirmed all the WBS Elements by entering actual dates for the same.
    Now i want to see planned/actuals costs in report. When i checked in one standard report it is showing 0 for both planned and actuals.
    I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement.
    Can anyone please help me in this regard.
    Thanks in advance.
    Regards,
    Suresh.D.

    The following is in answer to
    "I also want to have a brief step-by step procedure for Project with only WBS Elements, i.e., from Initiation to Settlement."
    Most probable scenario would consist of following steps
    Create PDef - Create WBS (either copying from template or manually) - Plan costs - Roll up planned costs - Budget (at top level) - Budget distribute - budget Release - WBS release - Post actual costs - run cost / revenue variance report - settle costs against the WBS - TECO project - Close Project.
    I believe I haven't missed on any important aspect.
    Would appreciate inputs from others in this effort.
    Hope this information was useful.
    Regards,
    Pradyumna

  • WBS element transfer from invoice to Fi Documents.

    Dear Friends,
    In our business process
      1. Project creation
      2. Delivery
      3. Project Invoice.
                       In this case we can see WBS elements in invoice item data. But this WBS elements did not transfer to Financial documents.
    Please suggest me how to transfer the WBS element from Invoice to FI Documents.
    Kindly Regards
    Arun

    Hi Arun,
    In the WBS masterdata, in basic data tab, if the " Account Assignment Element" is not ticked on, please tick it. After doing this, try the transaction from scratch once again. Now the posting document will have the WBS element.

  • Planned Cost WBS Element = which extractor

    Der all,
    i try to extract the planned cost for an WBS element.
    The extractor 0CO_OM_WBS_2 delivers no data and 0CO_OM_WBS_3 only a few.
    Am I using the correct extractors.
    I want to extract the same figures you can see in R/3 with transaction CJ41.
    Thanks for help !
    Marc

    Hi,
    Please try the 0CO_OM_WBS_1 extractor for WBS Element Costs (Plan). Data can be extracted using Currency Type = 00 (transaction Currency), 10 (CC Currency) and 20 (Controlling area currency).
    Refer to the below link for fields of origin in the extract Structure.
    http://help.sap.com/saphelp_nw04/helpdata/EN/dc/f8ab39bae14c67e10000000a114084/frameset.htm
    Thanks.

  • Changes in WBS ELEMENT while extracting

    Hi All,
    I am extracting data from PRTE table .I had created generic data source based on this table but I am facing some problem.
    Lets say the data in PRTE table is
    wbs element
    current proj
    start date
    end date
    00000061
    00000002
    10.09.2007
    31.05.2008
    00000066
    00000002
    10.09.2007
    31.05.2008
    00000067
    00000002
    10.09.2007
    31.05.2008
    while extracting data is coming like below in RSA3
    wbs element
    current proj
    start date
    end date
    RR/0702
    RR/0702
    10.09.2007
    31.05.2008
    RR/0702-SUP
    RR/0702
    10.09.2007
    31.05.2008
    RR/0702-SUP-FRW
    RR/0702
    10.09.2007
    31.05.2008
    In PSA TABLE the data is coming.

    hi,
    i think you may need to use coversion routine function modules.
    CONVERSION_EXIT_ABPSN_OUTPUT
    CONVERSION_EXIT_ABPSN_ INPUT .
    CONVERSION_EXIT_ABPSP_OUTPUT
    CONVERSION_EXIT_ABPSN_INPUT .
    please take abap pepert and implement small loogic.
    Need to choose the right FM based on your be wbs element feild.
    Thanks

  • Assignment of networks / activities and WBS elements

    hi experts,
    I have some basic doubts... can any ony clarify these:
    1.can a WBS element be assigned to several Projects.
    2.  can a network be assigned to several WBS elements.
    3. can an activity be assigned to several networks
    4. can an activity element be assigned to several network activities.
    thanking in advance.
    regards,
    priyanka
    Edited by: priyanka on Jun 29, 2008 10:54 PM

    Hi Priyanka,
    Yes, Iam sure that a single network can be assigned to more than 1 WBS at a same time.
    A WBS can be assigned several activities even different networks also if required, but an activity can be assigned to one WBS element only. Once activities are assigned to WBS elements, you can exchange data between activities and networks. For example activities can inherit statuses from the WBS elements they are assigned to. Conversely you can total up project activity dates to WBS elements or can check funds allotted to activities against WBS.
    A single or several networks can be used in the project structure, to map individual aspects of the project such as activities that are linked to each other via relationships. The relationships between two activities define the logical sequence of the activities (predecessor u2013 successor relationship) as well as their time dependencies. Activities of different networks can also be linked to one another. Advantage of network technique is that, system can automatically determine planned dates for each activity and entire network on the basis of duration of individual activities and their chronological sequence.
    Priyanka, I hope this may clear your doubt . .
    reward points required please . . .
    Regards,
    Dhruv Kumar Malhotra

  • Derivation of Cost Center from WBS element MAster data at the time of invc.

    dear all,
    during invoice postings with wbs element account assignment system do not derive assigned cost center from wbs element master data.
    how can the system derive the cost center automatically??
    Is there any BADI available to this issue.
    regards
    saqib

    Dear,
    WBS is Real and cost center in the master data is for statistical postings i.e. responsible cost center in WBS.
    How to make substitution (OKC9) deriving the cost center in document line items / invoice posting etc.
    Kindly give detail process for its configuration steps and is there any BADI available which can be useful in this regards?
    Regards,
    Saqib Usman

  • Field WBS element is not modifiable in asset master data

    Hi Friends
    In case of one of my asset classes, i am not able to modify WBS element. It is greyed out.
    I checked in screen layout rule assigned for that asset class, the fiield status is modifiable.
    Please inform whether i need to check any other thing also.
    Thanks & Regards
    Bhairavi

    Hi Paul,
    Thanks for your reply.
    Currently no WBS is assigned in the asset. I want to assign one WBS .
    Currently one internal order & 1 cost center are assigned.
    I tried insering qa new time interval also , but the field is grayed out & i cant do any changes in the field WBS element.
    I have already checked the field status of this field in screen layout rule , its modifiable.
    Kindly advice.
    Thanks & Regards
    Bhairavi

  • Query Regarding transfer of WBS element change data

    Hi All,
    We have a requirement in which we need to transfer the change/create/delete information for WBS element in SAP to a third party system for certain set of specified fields.
    The problem we are facing is that the change and create information dosen't get updated in the CDHDR and CDPOS tables, but the master table for WBS element (PRPS).
    One way of fetching the change information is to compare the old and new field values for the specified fields, which seems to be a tedious job.
    Just wanted to know if there is any other possible solution to the above requirement????
    Thanks in advance,
    Manish Gupta

    You should also include Oracle Warehouse Builder in your evaluation. It uses Oracle gateways to pull data from 3rd party databases and supports loading from flat files as well. If these data sources support ODBC, then you might be able to load via the ODBC (Generic Connectivity Gateway), wouldn't be super fast, but it you could manage the dowtime...
    http://www.oracle.com/technology/products/warehouse/index.html
    Donal

  • Option to change WBS master data

    Hi,
    Our Client has customized program to upload WBS master data.At present when we upload & create, WBS elements are getting locked (AALK) automatically.
    But Client don't want this to happen. They want as & when they use upload program or change the WBS master data, there should be option with "AALK" or without "AALK".
    Can this happen?Any points on this will be highly apperciated.
    Regards
    Tushar

    Solved by own

Maybe you are looking for

  • Need help with distcc

    Can someone point me in the right direction on getting a working distcc setup for this layout? (I've used the terms daemon and server from the wikipage: http://wiki.archlinux.org/index.php/Distcc) Server Daemon Server x86_64 i686 Mac Mini (Intel) ubu

  • Email notification depending on date

    Here's what I need to do: I need compare an "Expiration Date" for various rows, compare each one to the current date and if the difference is less than 2 weeks, I need to send an email for each row. I'm looking for some general guidelines on how this

  • Grant read only permission on my stored procedure.

    I have a requirement like give reaonly access on my stored procedure to another user , not even execute permission on that steored procedure. Could you please let us know the command ?

  • Create ejb application and configure  it into webservices

    hi experts how to create a small ejb application in netweaver developer studio and how to configure that application into web services. please help me thanks ram.

  • Where can I find the Safari menu?

    Where can I find the Safari menu?