WBS wise AVAC control??
Friends
Can we have WBS wise AVAC control ???
1) As I see I cannot control the AVAC wbs thru CJBV or CJBN since its on Project def wise.
2) If I set the status one with availability control - forbidden and another with allowed , and then I go for AVAC thru cjbv or Cjbn then also system is not restricting .
Please provide me a suitable solution
Muralidharan.S
Hi Murali,
Are you saying that you want to activate availability control for WBS based on the level of the particular WBS?
Could you explain your business case for this?
Regards,
Gokul
Similar Messages
-
WBS Wise - G / l Account Number Informations
Hi All,
If any BAPI is available for getting G / L Acc Information in WBS wise .Plz give me that names.
Thankx advances,,,Hi,
check this link
http://sap4.com/wiki/index.php?title=BAPI_ACC_DOCUMENT_POST
Re: G/L Acc Opening Balances.............
Complete list of Bapi
http://www.sapbapi.com/bapi-list/
Reward if uesful
jgds -
Hello,
in my organisation, FI is active but PS not yet active. Now till date we are posting all the CWIP related entries to manual CWIP account with a reference to WBS Element. WBS are already created. Now, we want to make PS live. My question is:
Can we upload the CWIP current balance WBS element wise in to SAP, so that it gets debited to the AUC created by SAP. and then we will settle it to the asset when project gets completed? if not what could be the best way
Regards
ShaileshHi Shailesh
Strange when you say that the PS is not active but the values are being uploaded on to WBS elements. Of course you can upload the CWIP balances on to the PS/ WBS elements but be sure to create appropriate settlement rules.
Regards
Virendra Malik
Edited by: Virendra Malik on Nov 15, 2008 11:50 AM -
WBS wise Line Items in PO output
Hi,
In a PO there are several line items and some have different account assignment for different WBS elements.The requirement is that the printout of the PO given to the vendor should have the sub-total for each WBS element and at the end the Total Value.Is it possible to have the output achieved as same?
Thanks and Regards
Shekhar PrasadThanks a lot for the valuable inputs.I will get in touch with the MM and ABAP people with the provided inputs
Thanks and Regards
Shekhar Prasad -
WBS Settlement rule control for service orders
Hello,
We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
For example :
Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
Thanks
RishaHi,
Please go to okg2,
Calculate wip or result analysis
remove the tick for Order In Engineer to Order Production
Now run result analysis and check whether settlement will not happen for cross company code.
please check this and revert back.
Thanking you
Vengaiah Chowdary -
Authorization control- WBS specific
Hi Experts
My client handles major projects.
Each WBS is owned by a management personnel like:
DGM Mehanical: Mechanical activities
DGM Electrical: Electrical engg activities
DGM Civil: Civil engg activities
Like wise various other responsible teams handle each work package (WBS).
In this context, can we ensure authorization control WBS wise?
It means, the WBS owned by Mech DGM should be editble to him only, and rest users should not be allowed for editing the sub objects of Mech WBS?
Or, if this can be managed using user status, please suggest how the required functionality can be achieved.
warm regards
ramSivaHi,
You can use Person Resposible field in the WBS master data for the purpose.
In T-code OPS6 you enter Person Responbile , Name , Office User.
Create Three roles , DGM Civil (12), DGM Elec (13) , DGM Mech (14).
For Authorization object C_PRPS_VNR enter for field PS_VERNR = 12 and PS_ACTVT = 01,02 & 03 for DGM Civil Role.
Similarly for other roles.
Key in 12 in person responsible field of the WBS belongs to DGM Civil.
Assign DGM Civil role to DGM Civil user.
Then he can only edit and ret can only view.
Option 2 :
You can also use Project Type.
Object = C_PRPS_ART
Create three project types Civil, Elec, Mec . In respective WBS select the project type as desired and assign that project type to the concerned role.
You can take help of Basis consultant for clear understanding.
Thanks
Saikishore.Ganga -
Assign WBS AVAC not in the lowest level of WBS elements
Dear SAP Community,
Our client has requirement to have budget availability control in WBS element level 3 while the WBS structure is until level 5 and the actual posting will occurred in WBS element level 5.
Our current setting is to have WBS element level 5 as Planning Element and Account Assignment Element. So, user can upload their WBS planning data from the lowest level of WBS structure. Then we copy the Planning Data as Budget through CJ30 and release it through CJ32.
If we set the value of Budget Data in CJ30 and CJ32 until the level 5, the system check AVAC in WBS level 5 instead of the amount rolled up in WBS level 3. If we set the value of Budget Data in CJ30 and CJ32 in WBS level 3, the system will check AVAC in WBS level 3 (as we expected) but the consequence is comparison of actual vs budget in WBS level 5 will have variance 100%.
Is there any way to define the budget data until WBS level 5 but the AVAC control is in WBS level 3?
Appreciate your inputs
Thank you and best regards,
FitriaHi,
>If we set the value of Budget Data in CJ30 and CJ32 in WBS level 3, the system will check AVAC in WBS level 3 (as we >expected) but the consequence is comparison of actual vs budget in WBS level 5 will have variance 100%.
We had similar kind of requirement, we had followed the above process. THis will provide the required functionality except the variance in reports. Try and convince the client to settle for this if this meets your requirements.
As AVAC can't be managed at WBS levels.
Regards,
Harsh. -
Dear All,
Needed some of the Reports in MM Material Mangment
1. Stock Report Value Wise
2. Stock Report Period Wise
3. Stock Report Storage Location wise
4. Stock Report WBS wise
5 . Stock Value
Can I get all my requirement in One Report; or Individually also is fine. Please DoCheck MC.9
It will be helpful. you an drill down the report as per your need.
Regards,
S Anand -
Credit control by Division wise
Hi Consultants,
How can we configure Credit control by division wise.
Thanks&Regards,
SivaNo, to the best of my knowledge, Credit Management works COmpany code-wise & Crediot Control area-wise.
Thanks,
Jignesh Mehta -
Budget control for commitment item and WBS
Hi all,
We assigned cost center in certain WBS, also create budget for this WBS. Since we activated funds managenet(FM), for all the postings which posted to this WBS, system will control budget for both WBS and commitment item, however, we just would like to control budget for WBS.
Would anyone know how to do that? thanks.
BenDear Lovewidow,
Can you give more details about your problem.
If there are still costs showing in your WBS reports you may have to run the report CJEN and CJBN which are reconstruct availability control.
Regards,
shareeq -
Controlling Coding mask access in PS - reg
Hi,
Iam using two types of coding masks at my client location.
For one coding mask one process owner is there and same for second also.
Here I want to maintain a check,i.e one process owner can't access the second coding mask and same for 2nd also.
pls suggest me how to do this..
Regards,
Prakash.
Reward points for useful answer.Hi Sreenivas,
Thanks for ur reply,
The thing is in our scenario for one project iam using 4WBSE,
Each WBSE is having seperate Personresponsible.
The activities which i have assigned to tht WBSE,he only can confirm those WBSE activities,these things iam controlling thrg Userststus Profiles.
Now again as per your suggestion if i maintain seperate profile for coding mask again it will effet my WBS wise activities confirmation(Relating to person responsible).
So pls suggest if thr is any possibility with this scenario,if not suggest one more....
Regards,
Prakash.E -
Tolerance Limits at all wbs levels
Hi
In our client process we need Tolerance limits at all wbs elements for controlling budget process for ex in our process 5 to 10 wbs.
wbs XXXX01 tolerance limit =100%
wbs XXXX02 tolerance limit =102%
wbs XXXX03 tolerance limit =103%
Please advise to solve this issue
Regards
Senhi
Thanks for replay
here client will create po at each level of wbs element.and now for one wbs element they are willing to allow more value of limit form their budget.
Regards
Sen -
Hi experts,
Our client’s free goods management utilizes Catalyst WBS control budget. Once the sales/mktg
promotion activity is set up and place limited budget on WBS, it’s been noted
that WBS budget cannot control free goods if it is consumed as sales order
process. Suppose; total budget 100 and assigned
value 80, that mean we can place at most 20 free good of sales order and
however when we complete free goods operation, we found 20 free good value is
not updated into assigned budged and
consultant analyze issue caused by free good order without value calculation.
Now the proposal is to enhance budget calculation program
for free goods of sales order process, actual cost shall be calculated into
assigned budget.
Could someone please suggest what are the instructions I should give in the FS?
(I don’t have much exposure in A/R)
Please help, Thanks in advance!Hi,
The field profit center (PRCTR) is available in BSID table, code is suggestedable but before going ahead try to ask your functional consultant about that filed (PROJ).
Thanks -
Standard report of PO with free items on WBS
Hi All,
Is there any standard report from which we can extract the list of POs WBS wise but only with Free item?
Means if a PO have 2 line item. First is against WBS and second one is free i.e don't have account assignment WBS. So how can we list those POs?
Please suggest.
Regards
ShishirHi,
Please ensure that you have maintained the value for invoice receipt as "not equal to" X as shown below. The F1 help for the field clearly explains that if the field is not equal to X, then its a FOC material.
Please cross check the same and test the report again. When I tested in EHP 4, its showing only the FOC item.
Regards,
AKPT -
Availability control is not able to activate in ko22
Hi frds,
my problem is i am going to creat availability control to order in 2012 i gave amount after order oerview also i gave amount but if we r not activate the budget control. because that is display mode.
in ops9 we had given activat type 1.that budget profile maintain in order type also.but i am not able to activate the availability control. can u please suggest me how to activate.
Actually my requirement is department wise budget control.when we are purchase any asset through po the amount will be reduced from that department. can u tell me suggestion this one also this is correct way r funds management implementation is the correct way.
Thanks,Hi,
The Availability control will activate automatically when you enter budget in the order.
Maybe you are looking for
-
Dear all, While running a particular report ZMIS I am getting the following error Note which actions and input led to the error. For further help in handling the problem, contact your SAP administrator You can use the ABAP dump analysis transaction S
-
Issue with Exchange 2007 SP3/Outlook 2010 User account Auto accepting Appointments
0 Hi I have an issue with 2 users who's appointments are being Auto-accepted or Auto Declined. As these are User Mailboxes there is no resource scheduling set on these. I've also checked for delegates (none), Rules (inclu
-
Odi os call with option parameter from odi procedure
Hi. I am calling a shell script from ODI as below inside an ODI procedure P1. The os command below is in 'Command on Target' side.I have defined v_in_param as an 'option' inside procedure P1 OdiOSCommand sample.sh v_in_param i am getting error as 'OS
-
Process Chain statistics (new stats in 2004s)
Hi, We have activated and are loading all stats (new ones) for 2004s. We are checking the stats through the portal. We have many stats showing in the default web templates used in the portal to display stats. Process Chain stats are the only ones
-
Dear All, in capital goods imports we are doing the following invoice Create PO ME21n + Miro for Taxes MIRO+ capture Excise Invoice J1IEX + Goods Receipts MIGO + Post Excixe Invoice J1IEX + Final Miro to Vendor MIRO i want to do reversal of this tr