WD ABAP - reload iView

We run a WD ABAP application in an EP iView. I understand I can navigate thru iViews from WD ABAP with navigate_absolute and navigate_relative.
What is the easiest way to reload my iView  (the one the WD application runs in)  - like the browser reload.

The goal is to reload the view as it was newly called ("called the first time"). The trigger is a button which the user presses. Just to force a roundtrip is not sufficient, because the WD application must be completely reinitialized for some reasons.
In WD ABAP standalone I got a solution via plugs:
ABAP WD reload button
The above works well but not when applied in the EP. Since we have to use uidpw SSO the WD requires a new login when the WD reload bypasses the iView. So I have to call the link of the iView rather than the link of the WD.

Similar Messages

  • Page cannot be displayed(error in ABAP Webdynpro iview)

    Hi All ,
    I am trying to create ABAP Webdynpro iview. When i try to preview it...i am getting "Page cannot be displayed". I checked the Web AS connection and it is working fine. Please put on some light on this.
    Regards
    Rahul

    Hi Sharma,
    Better U check the  Iview parameters(Application name,and Namespace).
    Also check it out in deployed content.
    Regards
    Nandha.

  • ABAP WebDynpro iView with window id problem

    We have a custom ABAP webdynpro iView that is part of a dynamic navigation.  When the iView loads the following warning message is displayed...
    An error occured while starting the iView.
    Application
    https://<server>/sap/bc/webdynpro/sap/WebDynproComponent/;sap-ext-sid=J2IlkGCm4WYvxnfaQC8bVgY0oAX5DVVY3z_8GGDYcLow
    will run with wrong client window ID!
    Do not continue; please report this problem to your system administrator.
    Once you click 'Ok' on the warning message....the webdynpro iView is displayed. 
    How do you not have the message display? 
    Thanks.

    If the user is using link from favourites of browser, Ask him to delete it and manually enter the url and Try.
    In my case, The user just deleted the saved link from Favorites and tried entering the url manually,
    though it is weird it worked.
    or else try these Notes 1450543, 1171930 .

  • ABAP Transaction iview Problems.

    Dear experts.
    I have created a Abap transaction iview in portal which navigates to one ABAP transaction after opening. But my requirement is not to show the command box after going to that transaction, because by using that they can enter the other transaction code in that command box and go to other transactions.
    So I want to hide that command box. Is there any way to hide that?
    Appreciate your response
    Regards
    Shanmukha Rao Banisetti

    Hi,
    Check the SAP Note 1010519 for the solution.
    Also try to set the ~webgui_simple_toolbar=1  parameter under transaction sicf.
    Below links also solve your problem
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e046cb5c-711a-2a10-95a9-81b365901b95
    Remove header  in ITS screen (internal ITS)
    Raghu

  • ABAP transaction iview Run Error

    hi,
    I met a problem, i create a  ABAP Trasaction iview, which preview result is right using admin. when i assigned it to a test user. it runs error. if i assigned administrator group to the test user, it will run right.
    why?

    Hi,
    1.I forgot to mention you have to assign the End User role as well for the iView object to everyone group.
    2. Check the permission for the system object in portal as well
    In case you are still facing the issue
    Post the error message.
    Thanks
    Prashant

  • ABAP Webdynpro Iview gives error in Portal 7.3

    Dear Experts,
    I have created iview by using ABAP wedynpro applicartion.it's through's below error.
    Please suggest me how resolve this. Cureetly we are running EP 7.3.
    404   Not Found
      SAP NetWeaver Application Server 
      Error: Requested resource does not exist.
      SAP Technology Troubleshooting Guide
    Details: Go to main page of this application.
    Thanks in advance.
    Regards,
    Mahee.

    Hi Mahee,
    while creating an Web Dynpro ABAP ivew.
    we have to give the System , Namesapace , Application Name and Web Dynpro Client.
    you have to check the System( Connection Test) and also check the ABAP application is activated or not in R/3.
    you have to select Web Dynpro Client  as Plain HTML.
    Hope it helps....
    Thanks,
    cbr

  • Portal eventing between Java WD iview to ABAP WD iview?

    HI Experts ,
    I have requirement on which,
    The manager can select an employee from the EE Search iView (Object and Data Provider). All other iViews react on the selection and display data of the selected employee. Technically the personnel number is transferred from the search iView to the other iViews on the portal page, also to the related activity iView. This mechanism is called Eventing. The applications, started via the related activity iView, are launched with the personnel number as parameter. With other words the application, e.g. Manage Objects on Loan, can be directly started for the employee selected from the EE Search iView.
    The Employee Information page is based on WD Java whereas the Objects on Loan application described in this specification is based on WD ABAP...........Due to different technologies used how to do the Pernr number transfer between these iviews?
    If anybody have done this let me know the steps
    Thanks in Advance,
    Dharani

    Hi Dharani,
    You can use portal events to enable iViews running on the same page to communicate with each other. You just have to find out which event is fired by the WD Java iView and then you will have to register and handle the event in your WD ABAP application : http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f6/7d6f4151dc5758e10000000a1550b0/frameset.htm
    You can use HttpFox (firefox plug-in) to find the details of the fired event (name, namespace...) by looking at the eventQueue parameter in the HTTP POST request.
    Regards,
    Pierre
    Edited by: Pierre DOMINIQUE on Jul 9, 2009 11:16 AM

  • Webdynpro ABAP based Iviews personalisation

    Hi,
    Can you please confirm if the right click +control option to personalise the iview method could be used for the iviews created out of webdynpro abap as well. or this method is only applicable for webdynpro java based iviews.
    Rgrds,
    Saket Kumar

    Hi,
    Kiran is right, you have certain approaches for personalization/customizing a WD4A. In the link he pointed you to, there already are two of three: End user Personalization and administrative Personalization (sap-confiq-mode=x). However, I advise you to use the way of component and application configuration as these are valid system-wide. Administrative Personalization only is valid client-wide.
    I would advise you to go through this WD4A tutorial:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b52e13c3-0901-0010-8fa6-d11a51821b7c
    best regards, Lukas

  • Setting dynamic language for WD ABAP application iView

    Hi,
    I have created an iView for a WD ABAP application which runs with two languages, EN and FR.
    When I run this application with app parameter sap-language=EN or FR, it works fine in corresponding language.
    How do I set this in its portal iView so that it picks up browser language?
    Thanks and regards,
    Amey

    HI Amey,
    The language is determined in the order below.
           1.      sap-language URL parameter
           2.      Default language in the setting for the system logon
           3.      Web browser languages (Accept-Language)
           4.      Default language of the SAP system
    Refer to
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm
    Just clear the logon language parameter for the user in SU01 and it should pick the browser language.
    If you change the browser language, you will have to logout and login again to the portal for the changes to take effect.
    Thanks
    Prashant

  • Change in Webdynpro ABAP(FITE_EXPENSES) iView standard code in Portal.

    Hi,
       We are on EP 7.0 with ESS 1.2 and MSS 1.0. In Backend R/3, we have applied EHP2 for Webdynpro ABAP screens. In travel & expenses -> Create Expense report we have a requirement where we need to put our logic for calculation of receipt amount based on no of travel days.
    for E.G. For a particular Expense type the amount per day is 100. While creating expense (Enter Receipts portion) user selects this expense type and based on no of days the receipt amount should get changed. For 4 days the amount would be 100 * 4 = 400. We need to code this logic in the standard Webdynpro Abap iView for Create Expense Report(FITE_EXPENSES).
    Can I get some pointers for this change.
    Regards,
    --VP.

    Dear Hayerk,
          Your requirement can be fulfilled easily. Have you tried hiding a button or a field or label in simple iView same is the case in your FITE_EXPENSES hiding scanned receipts button. What you can do is attach a super user to a HR user having a pending expense report to be created. Through content administrator you can preview mytrips and expenses iview in that go and click on create in tab ALL MY TRAVLE REQUESTS for expense report then on scanned receipts button right click -> user settings -> hide button.
    Regards,
    --VP.

  • ABAP webdynpro iView issue with Internet explorer

    Greetings,
    We are trying to integrate ABAP webdynpro with portal using the standard SAP webdynpro iView template, we are able to successfully integrate and display on portal pages.
    However if we are using IE version 7.0 browser we do not have any issues, but when we try to use IE version 6.0 the webdynpro portal pages does not display any content. A workaround was to open up the IE settings and change the setting for Navigate sub-frames across different domains to 'enable' from 'disable'.
    This fixed the issue.
    Also we came across information that we can change the setting to force the portal to use the css from the ABAP backend by changing the iView property 'Supply portal stylesheet' from 'Yes' to 'No'. Does this affect the portal behavior in rendering content in MS IE.
    Please let us know if there are any other methods to overcome this issue, as this will affect many of our users.
    iview isolation is of type 'URL'
    page isolation is set to 'Embedded'
    Portal page used is default framework type not webdynpro type
    thanks,
    Sudhir

    Greetings,
    This issue was fixed.
    I found this blog helpfull
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/general%2btechnical%2baspects
    thanks,
    Sudhir
    Edited by: Sudhir Sidd on Jul 23, 2008 5:42 AM

  • ABAP WebDynPro iView: Session remains open in backend.....

    Hi Experts,
    We have configured ABAP Webdynpro (SD Order Creation) iView in SAP Portal. When we test it from intranet, everything works fine and session in backend gets terminated when we leave that page on portal. But when we test it from internet, session remains open and not getting closed. How to terminate these onen sessions??
    SAP Portal and backend SAP ECC are on same domain....
    Helpful answer will be respected.....
    Thanks
    PRAMOD

    Hi Arun,
    Thanks for the comment.
    Let me try this and will get back with result.
    Regards,
    PRAMOD

  • Integration of webdynpro abap custom iview into standard ESS/MSS portal

    Hello all,
    Could anybody please throw light on how to integrate custom iview which is developed in Webdynpro ABAP into standard tab in MSS (Webdynpro java)
    For example.I want to add few custom fields(which are mapped to infotype 0041) into general information link of MSS.these fields will be created in webdynpro abap.
    or.
    I want to create a new link under general information which pops up as a custom iview (which is create in webdynpro abap) .
    please let me know how can i meet the above requirements.
    Thanks in advance.

    I am not really sure about your requirement. With my limited understanding of that , i think that you have few possibilities.
    1. You can let the ess/mss application communicate with WDA application via a Poral event.
    2. You can enhance the ESS WDJ component and use RFC destination to get the data from info type and build your own view in WDJ.

  • WD abap calling iView

    hi folks
    i guess i have quite a simple question but....
    i always called and iView over the control IFrame in WD Abap, but i got some problems so i heard i should use it with die if_wd_portal_integration methods, but i have no idea how.
    can anyone provide me with a simple solution how to call my called iView "pcd:portal_content/atcp.ATCP/r3_trans_call", which is in fact a sapgui transaction , and question 2 how do i have to navigate back????
    do i have to call this in an own View where a back-button is on it?
    kind regards so far.
    oliver

    I have the same Problem.
    I work with ABAP for Webdynpro
    I can not navigate with this code
    call method l_portal_manager->navigate_absolute
      exporting
        navigation_target   = 'ROLES://portal_content/OGSDID/AuftragID'
        navigation_mode     = if_wd_portal_integration=>co_show_external
    *    WINDOW_FEATURES     =
    *    WINDOW_NAME         =
    *    HISTORY_MODE        = IF_WD_PORTAL_INTEGRATION=>CO_NO_DUPLICATES
    *    TARGET_TITLE        =
        context_url         = 'http://icosapv01:56000/irj/portal'
    *    POST_PARAMETERS     = ABAP_FALSE
    *    USE_SAP_LAUNCHER    = ABAP_TRUE
    *    BUSINESS_PARAMETERS =
    *    LAUNCHER_PARAMETERS =
    It is the same code as in the test Component and it also dosn't work.
    When i test the absolut navigation_target string with the support apllication from the portal it works, but i Think it is a Java Webdypro.
    Has anyone a Idea??
    Thanks for all suggestions.
    Marlies

  • Modification of ABAP Web DynPro iViews delivered via Business Packages

    Hello Everyone,
    If this has been answered before, I apologize.
    Is there any 'supported' way ( or 'unsupported' ) to modify the out of the box ABAP WebDynPro iViews which are delivered via some of the new Business Packages for ECC 6.0?
    For example, I want to hide some fields on the 'Create Order' iView delivered in the Business Package for Internal Sale Representative..
    Thanks

    These Business Packages are just iView definitions that point to normal Web Dynpro ABAP components/applications that reside on the backend ABAP system.  They can be enhnaced like any other WDA application. 
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6b/edc21e5e1e4a33a492b8955afffac7/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b170d256293c5ce10000000a421937/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/f4b9422e0fb911e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/frameset.htm

Maybe you are looking for

  • ITunes 11.1 problem: no sound when watching movies!

    Hi there When I try to watch video on my Thunderbolt display (27 inch) connected to my MBP Retina, everything is fine....untill I go full-screen!!! Then I don't have sound anymore, only video! Can anyone help me out on this, or do I have to wait for

  • IDS error message

    hi I have 4200 series IDS. Its work fine last couple of month. but now its not work. when i login and see a error message come interval 10 sec. the error message ================ ct-sensorApp.1249 not responding, please check system processes-the con

  • Permissions on server

    Hi all, I have a small network with an OSX 10.3 Server sharing a RAID drive amongst ten or so 10.4 Macs. Each of the Macs belongs to a group on the server, and everything works beautifully. I recently upgraded one of the Macs (mine) to 10.5. When I l

  • BorderManager 3.9 proxy errors - fillattr

    We are having issues with BorderManager 3.9 and the proxy configuration through imanager, and attempting to resolve the fillattr issues. Removed a BorderManager 3.8 server from the tree. Installed a new netWare 6.5 server. Upgraded to service pack 7.

  • Auto Mail to Sales Order Booked

    hi, i want to send automail once Sales Order is Booked . is it possible or Not .