WDS - WLCCP between WDS AP and WLSE

We have successfully configured an AP as WDS and registered infrastructue Access Points. The WLSE has also successfully been authenticated by the WDS AP. My problem is when I move the WLSE onto a different subnet it looses the connection. I understand the WLCCP uses multicast, is this also true for conversation between the WDS and WLSE? Do I need to enable Multicasting on my router?

Do you use an external radius server or the local radius server to configure your ap to be an WDS AP.
Can i get a copy of your config i am struggling to get AP authenticate with local radius but it is not working to well?
Regards Bjorn Sundin.
[email protected]

Similar Messages

Snmp trap and WLSE

hallo
in a wireless network with WDS service and WLSE, all Infrastructure APs are registered to WDS. To manage alarms, faults etc in Infrastructure APs the logs must be sent to the WDS or directly to WLSE ?
francesco

You have to send the logs to WLSE.
http://www.cisco.com/en/US/products/sw/cscowork/ps3915/index.html

WLC and WLSE

Hi Netpro
what is the difference between the WLC and WLSE?
thanks

Basically the WLSE is no longer around:) the WLSE was a management box for autonomous ap's. The WLC manages lightweight access points and that is really what everyone is moving towards if not already.
http://www.learnios.com/viewtopic.php?f=5&t=33687
https://supportforums.cisco.com/thread/328073
https://supportforums.cisco.com/thread/338936

Unable to deploy a Windows 8.1 image using WDS name and approve!

Hello,
Hopefully some of you residing Windows 8.1/2012R2 WDS experts are able to answer this question that has been tormenting me for 3 weeks now!
I have been trying to deploy a custom Windows 8.1 image to a test VM using an answer file and WDS for a mostly unattended process (outside of selecting the image to apply).
The image and installation process actually works flawlessly if I let WDS handle all known and unknown clients. The problem comes when I try to "name and approve" the stations. All I do is enter the name and leave everything else blank
and/or at their default settings but it always fails no matter the tweaks I've been trying to apply to the answer file, UnsecureJoin true or false with the credentials and whatnot does not matter. For the sake of simplicity, I'll post the "specialize"
portion of my answer file which worked using UnsecureJoin without name and approve here:
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<UnsecureJoin>true</UnsecureJoin>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ComputerName>%MACHINENAME%</ComputerName>
<RegisteredOrganization>Organization</RegisteredOrganization>
<RegisteredOwner>Utilisateur</RegisteredOwner>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>1009:00001009</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>fr-FR</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
The error I retrieved from C:\Windows\panther\setuperr.log is: "[DJOIN.EXE] Unattended Join: At least one of JoinWorkgroup/JoinDomain must be specified: 0x57". Thus, I retry with name and approve but by specifying the JoinDomain with the
%MACHINEDOMAIN% value as such:
<Identification>
<UnsecureJoin>true</UnsecureJoin>
<JoinDomain>%MACHINEDOMAIN%</JoinDomain>
</Identification>
This seems weird since WDS should already have this information which is specified in the WDS server properties. Still, I add the requested information and try again which then gives me the following error fetched from C:\Windows\debug\NetSetup.log:
"NetpGetDomainData: Failed to find the domain data: 0x6e"
Anybody else ran into this and know the fix for it?
Also, as an additional note, not sure if it is relevant, but doing only "Approve" will not work at all either as it gives me the following error when I attempt to do so: "The name provided is not a properly formed account name." despite
the fact that I've formatted it to use "CVL%MAC" which should pass by fine.

Hi,
Firstly, I need to confirm how the name setting got passed? Because according to my test, if the device named uncorrectly, it would prompt the error and couldn't go to next step:
As far as I know, the naming standard is different between Device Identity and ADDS server naming policy, the second naming policy should be like: %61username%#
Therefore, please check your PC device name if there is any problem with it. You can also refer to the contents of the link below for more details about Naming Standard:
http://programming4.us/desktop/21662.aspx
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
For another problem, Unsecure join, according to the contents of the link below. since Vista, shared computer password is a dynamically generated, no need to assign the password manually.
http://technet.microsoft.com/en-us/library/cc730845(v=ws.10).aspx
Roger Lu
TechNet Community Support

WDS, DHCP and WSUS on same server, Virtuals find WDS and start up process, Physicals get PXE-X55 error.

I have a Windows 2012 R2 server that has the WSUS, WDS and DHCP roles installed. I also have a SCVMM (Win2012R2) server on different machine and it has been connected to the WDS server
Followed many different guides on the internet to configure the WDS server but if I have option 60 configured the virtual machines will find and do a PXE boot successfully, but the physical systems will fail with a E55 error.
I take out option 60 and both fail.
Did I miss a niggly bit some where?

Have you tried this (from article):
Custom-made Option 60 – String – PXEClient
Predefined Option 66 – IP or Hostname of the WDS Server (in our case 10.150.150.1)
Predefined Option 67 – boot\x86\wdsnbp.com
and this in WDS properties:
and
Many people remark this as solution:
WDSUTIL /Delete-AutoAddDevices /DeviceType:ApprovedDevices

WDS compatibility and ProxySTA feature

Hi,
I wasn't able to find documentation about this...
Does anyone know if I can connect the airport express to a Comtrend HG536+ modem-router using WDS?
And, if the result is not as good as expected, would I be able to use the ProxySTA feature with the same modem-router?
Because I'm not sure if any, or both, of the feature only work, or work properly, with an airport extreme...
Thanks in advance!!

Forum expert Duane posted this list of known compatible WDS devices some time ago.
http://discussions.apple.com/thread.jspa?threadID=2065344&tstart=0
+So, to enable and use the ProxySTA feature, it doesn't matter what router is providing the wireless connection to the Airport Express?+
According to several articles that I've read, you can connect the 802.11n Express to any wireless network at either 2.4 GHz or 5 GHz and it will connect to enable the ethernet port. The Express does not provide any additional wireless coverage when it "joins" a wireless network, it simply becomes a client of the network.

WDS network and printing

Having probs trying to connect to a HP c5180 on our network...
Setup is 2x Netgear WNR3500 routers, one as a wireless base station, one as a repeater. Printer is connected via ethernet to the repeater (as it's up in our office), and it gets an IP fine, and works fine on an ubuntu desktop.
But... my macbook Pro is having probs. I can't see the printer at all over bonjour no matter if I'm connected to the base or repeater stations, and if I manually add as an IP printer, I initially see it and can send jobs, but then it states the printer is busy and won't print.
Any ideas? Have enabled RIP on the base station, but that made no difference. Also disabled IPv6 on my macbook pro to see if that would work.

PS - FYI, in both situations, the hard-wired AX is set up as WDS main, and the AX connected wirelessly for Airtunes is set up as WDS remote; and connection sharing is set up as "off - bridge mode".
Thanks again for any help.

WDS network and Airtunes

I have a WDS network as follows: TC hard wired to AX n which connects wirelessly to an AX b/g that is only used for Airtunes. It works great.
But I tried to duplicate it at a friend's house; the only difference is that her TC is wired to an AX b/g which we want to connect wirelessly to another AX b/g for Airtunes. Works great for internet at both from both the TC and the AX hard-wired b/g. But we can't get her last AX to work on Airtunes; it stays flashing yellow. I duplicated all the settings (e.g., "participate in a network", other checkboxes, etc) exactly. Any advice? Could it really be that the fact that mine runs through an AX n and hers through an AX b really be the difference? Other ideas?
Thanks!

PS - FYI, in both situations, the hard-wired AX is set up as WDS main, and the AX connected wirelessly for Airtunes is set up as WDS remote; and connection sharing is set up as "off - bridge mode".
Thanks again for any help.

Diference between Airport Express and Extreme

What may I ask, is the difference between the Airport Extreme and the Airport Express? And why is there a price difference between them. And would I be able to use it for surfing the web and print wirelessly on my Macbook? Which would be worth it for me, Because I'm sorta on a tight budget...

Hi SMLaracy:
The AE offers Wireless access and/or Airtunes and/or a USB printer port and WDS with a compatable WDS basestation.
http://www.apple.com/airportexpress/
The AEBS offers Wireless access with an additional LAN port (to connect a wired computer or switch), a USB printer port and a built-in modem.
http://www.apple.com/airportextreme/
I hope this helps!

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

Select query differences between oracle 9 and oracle 8.

Hi,
I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
ex:
With oracle7
SQL> select 'champ1','champ2' from DUAL;
'CHAMP 'CHAMP
champ1 champ2
With Oracle 9
SQL> select 'champ1','champ2' from DUAL;
'CHAMP1' 'CHAMP2'
champ1 champ2
So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
Thanx.

Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
My suggestion is -> First Go through the basics Of SQL in general.
Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
And, finally learn the advanced commands of that DB.
You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
Anyway,
You can get the quite familier output by first type the following command ->
set lin 310Regards.
Satyaki De.

The difference between photoshop eps and illustrator eps

Before installing snow leopard, Quark Xpress could distinguish between photoshop eps and illustrator eps files when a file needed to be modified. Now all it does is open files in only one item of software (depending on which you have told it to open files in). It's very inconvenient
Anyone got any ideas?

It sounds like you may have assigned EPS files to open in a particular app. That causes anything ending in .eps to open in that app, and the OS ignores the rest of the UTI (Uniform Type Identifiers) data.
About the only way to fix it is to clear the LaunchServices database. Close all running applications. Open the Terminal and copy/paste the following line and press Enter:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Close the Terminal and immediately restart. The OS will build a new database based on the installed applications. EPS files created by a particular application should now open in that app.

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

WDS - WLCCP between WDS AP and WLSE

Similar Messages

Maybe you are looking for