We changed the password on our wireless and now I have interrupted connection through the relay airporter?
Help. We changed the password on our airport express and I have no problem connecting to the internet, but I am having a problem connecting through our relay airport express. My internet connection is slow and my music will only play for a couple of seconds and then it cuts out? Any suggestions?
Are both of your AirPort Express Base Stations (AX) the 802.11g or 802.11n model? Do you have the second AX configured to "join" the first's wireless network or to extend it?
Similar Messages
-
The IPOD was purchased from Amazon, My kid put a security code on it and forgot what it was and kept trying different combos. Now it is Locked!
Msg comes up "IPOD is DISABLED" conect to Itunes
Ready to throw this thing out the window!
Thanks for any help in advance
Kmc21Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
IT shows Bell as the provider but we seem to have lost something during this update.
can someone help me please.Check Settings>General>Cellular and make sure Cellular Data is set to On. If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again. If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.
-
changed the password on my 4s and now i'm locked out, how can i change my password without accessing my phone?
just so you all don't think i can't read i tried restoring my phone but it is telling me that it can't restore the phone because it is locked. i'm not entirely sure how i entered a password in twice incorrectly, but go figure. does anyone have anyother ideas other than restoring it?
-
I just changed my password in youtube account and now it is not recognizing the new password can someone help?
Well, mobile me was elimated over the summer.
http://www.apple.com/support/mobileme/ -
i' ve changed my password for itunes account and now i can't uppdate any applications bought before?
Sign out in iTunes and sign back in again with the new password.
-
I changed my password on my iPad and now my games won't connect to Facebook. How do I fix this?
Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker. -
i changed my password on my iPod and now i can't unlock it. how do i unlock it with out loosing all my items on it? (e.g. pictures)
Please someone help me?!You have to connect the iPod to your syncing computer and restore via iTunes. If iTune asks for the passcode and yu can't enter the pascode or if you do no have the syncing computer you hove to place the iPod in recovery mde and then restore.
If you did not previouly sync to the computer after changing the passcode, iTunes will ask for the passcode. Placing the iPod in recovry mode will erase the iPod. That is the way this security feature works.
You can restore from backup but you will lose everything since the backup. -
I changed my aol password on my desktop and now cannot access my emails through my iphone.
I changed my aol password on my desktop and now cannot access my emails through my iphone. I tried changing the password on my phone but it still says user name or password for aol is incorrect. I have also deleted the account and added back and it still saids the same thing. I would really appreciate any help on this.
You are referring to your iTunes/app store account? You will need to sign out of your old account on your iPhone and sign in with the new one.
-
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
GratefulIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over. -
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
thanksIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over. -
I put the BT WiFi app on my iPad Mini and now I can't connect to the internet. Please help
I put the Bt WiFi app on my iPad Mini and now I can't connect to the internet. Please Help
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I reset my ipad 2 and now it won't connect to the internet
I reset my ipad and now it won't connect to the internet
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Purchase of Creative Cloud genre but the charge is 2 times and now I have 2 subscriptions
Greetings, a few weeks ago made the purchase of Creative Cloud genre but the charge is 2 times and now I have 2 subscriptions, I need to make the return of 1 product since this repeated but does not work if I click restore subscription.
I'm from Guatemala and chat support is not available for ayuder me solve my problem.
Thank YouSorry, This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html -
I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.
You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store
Maybe you are looking for
-
Hello all! Im logging in with the same credentials that i used literally 15 minutes before the update. Its really odd. it will not log into my desktop. its a totally new user but using my credentials so all my settings are fresh. does anyone know a w
-
Upgrading to xcode and can't connect to the network
Hi! I use a C++ library in my application which connects to the network (I suppose it uses sockets). I've been using it for months and I was using xcode 3.2.4. Now, I just had the great idea of upgrading to xcode 3.2.5, and I found out my application
-
Constant disconnect with centurytel and wrt54gs
I set up dsl for my parents with centurytel, and linksys wireless router. they can get online fine but seems like while they are surfing it constantly drops the internet connection. if you go to 192.168.1.1 it shows disconected and you have to either
-
Hello, I would like to put in a nice looking stock ticker for an Indian company in my iWeb website using the HTML Web Widget feature in iWeb. I have found a really nice one on Yahoo but that is only for Dashboard. I have two questions: 1. Where can I
-
Error trying to insert xml into Oracle table
Hi - I am trying to (a)read a row from emp table and output the results in xml format and (b) insert this row to another emp_new table (same structure as emp). When I run it here is what I get: OUTPUT IS: <?xml verions='1.0'?> <Employee> <Emp num="1"