We got a new modem and i keep getting disconnected!

We moved to a new house and we still have the same ISP but we upgraded our internet to a faster connection. So the cable guy came, installed our cable and internet and we got a new modem. He connected our WRT54G Ver. 6 router to the new modem.
Our new internet connection is fast, at 10mbps, but the problem is it keeps disconnecting us. I don't know if the problem is the modem or the linksys router. 
I don't know much about networking so please help =(

You can connect the computer only to the modem and check the connection is steady or not. If it is steady then try to upgrade the fimrware of the router .
Before doing the following steps, you have to connect the modem to the
router's Internet Port and the computer to the Ethernet Port Number 1.
Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter.
When
it prompts for the username and password, leave the username field
empty and provide password as “admin "" all in lower cases and then
click on ok. Now click on the 'Administration' tab- Then click on
the 'Firmware Upgrade' sub tab- Here click on 'Browse' to select the
extracted/uncompressed .img or .bin file and click on "Upgrade"
After doing the firmware upgrade you have to reset this router again
for 30 seconds.
Reset the router
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button. 
Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter.
When
it prompts for the username and password, leave the username field
empty and provide password as “admin "" all in lower cases and then
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “.
Click on the Save Settings button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
- Click on clone your PC's MAC button and then click on the Save
Settings button.
To configure the router for Wireless.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here Wireless Network mode should be mixed
- Provide any name in the Wireless Network Name (SSID) box, all in
lower cases without any spaces in between.
- Set wireless channel to 11
- And wireless SSID broadcast should be Enabled and then click on
save
settings.
Please make a note of Wireless Network Name (SSID) as this is the
Network Identifier.
For Wireless Security : -
Now Click on the Sub tab under Wireless > Wireless Security.
Change the Wireless security mode to WEP
Encryption should be 64 bits.
Leave the Pass phrase blank, don't type in anything.
And under WEP Key 1 type in any 10 numbers please.
Click on save settings.
Please make a note of WEP Key 1 as this is the Security Key for the
Wireless Network. 

Similar Messages

  • WRT54G- Won't accept my new modem and I keep getting a strange error message

    On Christmas night, my modem crapped out forcing me to purchase a new one the next day. After getting it online, I attempted to hook up my router. However, I could not connect to the internet through it. I figured it must be because the IP address must have been changed and it needs to be reconfigured.
    So, I tried completely re-installing the router but I still could not connect to the internet. When I went on the web browser based page for the router to try to configure it, I got an error message stating that another PC on the network has the IP address. I did have a second PC hooked up to the router at the time; I unhooked it and tried to at least get the router to configure to one of the PCs.
    Yet, again, I was getting an error message saying: "May be route already exists".
    Because of this, I cannot register the new IP address and still cannot connect to the internet through my router. Anyone know what I need to do?

    Who is your Internet Service Providor? Do you have a static IP Address provided by your ISP?

  • HT1386 I got a new iPad and can't get my music or videos to download. Every time I download I go to music & it still says no music   Is there a setting or something I'm missing?

    I got a new iPad and can't get my music or videos from the cloud or iTunes. Every time I download all my music & a video then click on music it says I don't have any music & I can purchase music on iTunes. I go to iTunes click purchased and download again. It shows everything downloaded so I open music and get the same message - no music. The same happens with videos. Am I missing a setting or something?

    But how did you fix it ????? Pls help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - tears of pain and frustration gushes out-

  • HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

    Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

    Hello there, Capricious13.
    There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I am trying to download the Facebook app to my new iPad and I keep getting an error .  It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url

    the iPad is totally new to me.  I can't seem to do anything with my Apple ID.  As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error.  It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url.  Cancel or Retry.  I have no idea what I'm doing wrong.  Any help would be greatly appreciated.
    I'd also love to know how to get rid of the old owner's name, which was Mike - I'm Ann

    Wow, I found a solution in another thread:
    I had exact same error.....
    Rebooting - Failed
    Logging in to iTunes - Failed
    Logging into itunes Store - Failed
    Logging into iTunes Genius - SUCCESS    I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
    Good luck!
    I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings.....

  • I am trying to load the new itunes and I keep getting a runtime error R6034

    I am trying to load the new itunes and I keep getting a runtime error R6034

    The new Itunes software update is flawed! I had the same issue. You need to uninstall Apple components, then reinstall. Go to this link for instructions. Takes about 20 mins but works!
    http://support.apple.com/kb/HT1923

  • I tried to download the new update, and I keep getting an error message, that it cant be downloaded!

    I tried downloading the new update, and I keep getting an error message that it can't be downloaded!

    Apple Store Tel: 1-800-692-7753
    Best.

  • I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

    I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

  • I tried to download the new itunes and i keep getting a message that the feature i am trying to use its on a network resource that is unavailable

    i tried to download the new itunes and i keep getting a message that "the feature i am trying to use its on a network resource that is unavailable

    Which particular .msi file does the message go on to say can't be found? (Several different .msi files can be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • I got a new modem and imac says connected with the airport, but cant get a web page to come up on either safari or firefox

    I started having internet problems with all my devices in the house, ipod, imac, pc laptop, tablets, etc... found out after being on the phone with comcast for hours, they determined my modem that they supply was bad. So I have the new modem now and very simple to install it and get everything working. However, I cannot get online with a web browser of any sort on my imac. which had no issues before.
    All my devices in the house work perfectly now with the new modem and my speeds are great, and even the imac (with the airporter) states it is connected. but I cant do anything pertaining to the internet. I have spent hours on the tech line with comcast and they cant seem to find the issue and said it is with my Imac, even though it was working fine before.
    Does anyone have any ideas, is there simply something I'm missing, please help. As I stated before, everything else that we own works great and has great connection. and the Imac states it is connected, but mail, internet, non of that works...??????
    Sean

    Hello sstefanik
    Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/kb/ht5289
    Regards,
    -Norm G.

  • Just got a new Ipad and can't get computer to recognize it.

    I just got a new Ipad and when I hook it up to the computer it does not show up on my desktop or in itunes. And on the ipad screen it still is asking me to plug in the USB. I have tried 3 different ports, restarting both the computer and Ipad with no luck. Any suggestions?

    I did not want to start a new msg so I will just comment on the iPad cover interfering with the keyboard connector. I like to leave the Apple case on all the time. Then I can just pick it up and go. I was a little disappointed when I tried to connect with the case on and had to take it off. I took a razor blade to the bottom of the case and cut out a section large enough to fit over the connector. It worked fine.

  • I am trying to install the new itunes and I keep getting error messages regarding my Apple Mobile Device....help!

    I am trying to install the new iTunes and I keep geting the error message "Apple Mobile Device" failed to start.  Verify you have sufficient privileges to start system services".  HELP

    Hey schouten53,
    Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Additional Information:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • I'm trying to download new apps and I keep getting a loading sign

    I currently have PhotoShop installed, and it works great. But I've been trying to download other apps like Illustrator and Lightroom  and I keep getting a loading sign, and nothing else happens. How do I fix this so I can download other apps from Creative Cloud?

    SakarPrasenjit it appears you are making progress as you no longer have a blank screen within the Creative Cloud Desktop application.  Please see Creative Cloud Help | Creative Cloud desktop app download error for more information on your current error.
    Also I would recommend reviewing Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html as it covers several common causes for connection failures.

  • I just got a new computer, and I keep downloading an obsolute version of Firefox. What do I do?

    I'm setting up a new computer, and I'm installing the Firefox browser. I'm at the Mozilla website and have tried downloading the Firefox browser several times. Each times it appears as a very long ago outdated version of this browser. I have uninstalled from my computer and tried again. I don't know what I am doing wrong since I am using the same technique that I used to install every Chrome and every other download I have ever installed on my computer - EVER! What can I do?

    The orange Firefox button is there in Firefox 4.0 and newer including the Firefox 9.0.1 you have, if you hide the Menu Bar. Right-click a toolbar and uncheck "Menu Bar".
    For the Reload button it could be combined with the Stop button in the right end of the Location (address) bar. With the Customize window open you can place them and other toolbar items wherever you want almost.

  • I got a new computer and i cant get my music on my phone from iTunes. i got an mp3 file and got it on itunes but when i try to get on my phone nothing happenes. my family have helped me but nothing is working. i don't want to delete anything

    i got an mp3 file and got it on itunes but when i try to get on my phone nothing happenes. my family have helped me but nothing is working. i don't want to delete anything. DONT KNOW WHAT TO DO!!!!!!!!!!!!!

    Yes but all your previous content from the old computer will be erased.
    Read this:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Maybe you are looking for

  • How can I print a PLD report by code?

    Hi people! How could I print a PLD report by code? or Is that possible to fill a PLD and print it? For example: I want to print a invoice automatically by code. I did it clicking the printer button by code, but that's not the best way, because the pr

  • Creation of material as TRAD

    Hi guys, I am asked by QA to maintain Financial views (Accounting7Costing) for a material that is cost of freight that we want to invoice to the customer. They would like to register this material as TRAD, but my problem is that I then have to determ

  • Editing text in PDFs - only the numbers are missing the font

    When editing text in a PDF (created in InDesign), I can edit all the text EXCEPT for any numbers. When I try to input a number, I get the message "The original font XXXX is not available or can't be used in editing. Acrobat is using the font Arial in

  • DEBMAS - 'Application document not posted'

    HI, We are passing DEBMAS and ADRMAS from MDM to R/3 via XI. ADRMAS gets posted successfully. However in case of DEBMAS we get Error 51 'Application document not posted'. While debugging we found that the messages are not passed to T_BDCMSGCOLL (incl

  • Error when I try to save my website

    Why do I get this error when I try to save or save as...any of my adobe muse websites? Thanks!