We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

Similar Messages

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Arlington Historical Society wants to give its visitors the ability to look at our IPhoto files on the Apple computer in our office, but NOT be able to modify them in any way. How can we do this?

Arlington Historical Society wants to give its visitors the ability to look at our IPhoto files on the Apple computer in our office, but NOT be able to modify them in any way. How can we do this?

Thanks. We want visitors to browse through our historical photos in any of the ways iPhoto will allow them, including slide shows, but also searching for photos by key word and viewing them along with the comments we have entered on that photo.
I was beginning to think iPhoto had no capability to limit users to certain functions.
I wonder if the use of Apple's sharing files function would help. I have read that it is possible to share files with others, and to limit their use to viewing only, but I don't know how to do this.

I have a Netgear NAS which uses Stora software. Mavericsks will not let me install the software as it is not from an approved developer. Is there any way around this?

I have a Netgear NAS which uses Stora software. Mavericks will not let me install the software as it is not from an approved developer. Is there any way around this?

There is, but why do you need the s/w installed? The NAS should have a web admin interface, accessible via ip address (http://<ip address>) which should allow all the needed configuration that is required for it to work with machines running os x.
Try to install as little s/w as you need to do something in Mavericks or any OS as it is usually the cause of future issues or problems.
If you're intent on installing the s/w, go to System Preferences > Security & Privacy > General and If you have tried to run it before, it should be listed there. You can then "un-block" it should you wish.

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

Please, I hd not paid my adobe plain, so, it´s canceled ... ok ... but just on few days I paid. My payments, today is OK, bur, all the time I opened my sotwares, I receive messages talking about I have, only, few days to use my softwares ... like "You hav

Please, I hd not paid my adobe plain, so, it´s canceled ... ok ... but just on few days I paid. My payments, today is OK, bur, all the time I opened my sotwares, I receive messages talking about I have, only, few days to use my softwares ... like "You have 02 days to expire your Adobe CC" ... I try reload my computer ... and many others ways to resolve this case, but I didn´t have successul ... Someone help me? Tks!

You had purchased CC on 01/24/14 which was cancelled & then you again purchased CC 9/7/14, the error message that you are recieving is due to the cancellation as the server is trying to remind you, please log out & log back in of the CC desktop app to activate the new cc . The issue should be resolved.
You have 20 GB of space allocated indicating you have active CC.
Regards
Rajshree

Have a gray screen with a flashing folder and no original CDs what can I do.

Can't boot up my mac at all. I have tried using command R and that did nothing for me
I also tried using the command option P R and that did nothing
I do not have the original CDs anymore And my latest backup is from awhile ago
Anyone with an idea I am all ears
Thank you

Gray screen and flashing folder means the firmware can't find the bootable OS volume.
Press and hold the power button down to force a hardware shutdown.
Use a wired or built in keyboard.
Press and hold the option/alt key down, press the power button to start the machine and keep holding the option/alt key.
What should occur if your boot drive is operating is seeing a grey screen with a bunch of icons that represent bootable options.
If nothing, then your drive is either dead or the GUID partition table is messed up, data recovery is possible if the drive is removed from the machine and still works, no encryption naturally.
My computer is not working, is my personal data lost?
If you see just the RecoveryHD partition, then at least the drive works, the MacintoshHD partition's data can be recovered.
Create a data recovery/undelete external boot drive
Reset your Mac
If you see your MacintoshHD then click on it and the arrow below it to boot, then in System Preferences, set the Startup Disk again. If it doesn't hold, try a #2 NVRAM reset and do the same thing again.
..Step by Step to fix your Mac

I'm using Captivate 8 and publishing courses to our LMS. As an end user, I can complete a course using IE, but not Chrome. Is there a setting that I am missing for other browsers?

I'm using Captivate 8 and publishing courses to our LMS, Cornerstone OnDemand. As an end user, I can complete a course using IE, but cannot complete the same course when using Chrome. Is there a setting that I am missing for other browsers?

guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

Hi, I'm new to using mac laptop, i just got one 1 month a go, i was downloading adobe flash player and it asked me for a password for the computer and i never created one, how do i over pass this situation?

Hi, I'm new to using mac laptop, i just got one 1 month a go, i was downloading adobe flash player and it asked me for a password for the computer and i never created one, how do i over pass this situation?

It is asking for your computer administrator account password to make system changes. You "should" have an administrator account password.
HTH

My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011. I have a new computer and it was authorized for iTunes. When I checked my account it says I have 2 authorized computers, but this one should be the only one.

My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011. I have a new computer and it was authorized for iTunes. When I checked my account it says I have 2 authorized computers, but this new computer should be the only one. How can I deauthorize whatever the other computer is? I don't want whoever stole my old computer to be able to use my iTunes account.

Get all that music back in itunes and sync again.

I have captivate 6, I´m using Quizers part and I need to publish file .app in .ipa, what do I have

I have captivate 6, I´m using Quizers part and I need to publish file .app in .ipa(ipad), what do I have to do to make it run in native way, that is without internet conection?

Hi!
That's an interesting question you have raised.
I would recommend you to create your Captivate Project, Publish it to HTML5 output and Zip the Output Package,
Use the PhoneGap to package it for iOS devices and produce .IPA file for the same .
You can create an account here -- https://build.phonegap.com/
I haven't tested it yet, but, I'll do it today.
Let me know if this works out.
Thanks,
Anjaneai

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply

Amazon allows for at least so far when I have an issue like mentioned above a re-download.
Yes it does. So does the iTunes Store:
Download past purchases from iTunes in the Cloud - Apple Support

I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

I'm sorry it's a nano 2gb silver

After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Als Fetch will not launch, I get error code: SSL error 9807. These worked perfectly befor

After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Also Fetch will not launch, I get error code: SSL error 9807. These worked perfectly before installing Maverick. Also everything that loads, all programs, take twice as long to load. I have MacKeeper and have cleaned and discarded all the garbage.

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.

Built Flash Video and will NOT show in Hosted Environment

Built Flash Video and will NOT show in Hosted Environment.
The files generated work on development machine. I posted the same
files in hosted environment and flash will not show. I first
thought it was Vista 64 IE 7 so I switched to XP IE7 and same
results. Still it is strange the falsh works locally. I am sure it
is something simple that I am missing. Any help would be
appreciated. Thank you.
Stan

Nickels55, I appreciate the response. Here are the
interesting facts. I had my hosting provider apply the mime type
and restart IIS. No flash video. I have Vista x64 Ultimate with I
think IIS 7 (the default IIS that comes with the OS.) The flash
video would not show in that environment until I applied the MIME
and then it WORKED. Yeah! But I still don’t have it working
on my web hosting provider with server Win2003. I thought it was
the hosting provider but I posted on my work server Win 2003 and
changed the MIME with a reset and could not get the video to work
there either.
I would like to try another angle here. Again I am using the
wizard to encode and publish the flash video. Maybe I don’t
have a settings correct. I can approach this a few ways.
1.) I can send my video to someone to post on their Win2003
server and see if they can get it going.
2.) Someone send me a short 3 second video that they produced
that they know it works on Win2003.
3.) Any other ideas? Surely someone in this universe has used
the flash wizard to encode a video and published to a Win2003
server. :)
I guess the other thing to note is when creating the flash
video I chose no controls (play, stop, pause). I want the video to
start when someone accesses the page for the first time.
Thank you for the help everyone.
Stan

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

Similar Messages

Maybe you are looking for