We have the invoices in staging table which are not posting to EBIZ

We have some invoices in RFM fm_ap_staging* tables from past month, which are not getting posted to EBIZ.
The invoices are in FP status and the invoices should picked up and posted to EBIZ.
We are not sure, why this was happening.
But , when we have changed the sequence number of the invoices to the maximum sequence number and ran the batch , the invoices got picked up and posted to EBIZ.
This doesn't make sense to me.
Is it the correct functionality, or whatever is in the staging table evry thing should be picked up by the batch and post to EBIZ.
Kindly verify.

Hi Henry,
From your description, I would like to verify the following things:
1. If you can receive emails from ExQuilla account via OWA? If yes, the Exchange Server is ok.
2. If other users can receive emails from ExQuilla account?
3. When you use Outlook Anywhere, can you receive emails from Outlook client? If yes, there are some problems with the third-party software ExQuilla.
If there are any problems with Exchange Server, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Join 2 tables which are not related with any primary-foriegn key constraint

Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.
How can i write the select query for this condition?
Thanks
Swapna

Hi, Swapna,
user11018268 wrote:
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.I think you want a UNION, not a join.
If you have 10 rows in table_a, and 30 rows in table_b, then
SELECT       A_ID,          A_Name,     A_Address,     A_City,     A_Pin
FROM      table_a
UNION
SELECT       B_ID,          B_Name,     B_Adress,     B_City,     B_City
FROM      table_b
ORDER BY           2,               4
;will produce up to 40 rows; 40 if there are no duplicates. (UNION implies DISTINCT.)
The corresponding column types should be similar, if not exactly the same.
There's no problem if A_Name is VARCHAR2 (50) and B_Name is CHAR (30).
However, there will be a problem if A_ID is a NUMBER and B_ID is a TIMESTAMP.
You must have the same number of columns in all branches of the UNION.
If you want an ORDER BY clause, put it at the very end, after the last branch of the UNION.
You can use positional notation (where 2 means the 2nd column) like I did, or you can use names from the first prong of the UNION (such as A_Name).
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.I'm not sure what your mean about "Address Label".
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables, and the exact results (formatted) that you want from that data.
You can concatenate all 5 columns into one VARCHAR2 column, if you want to.
You'll probably want to use RPAD (or simillar functions) to make the output line up nicely.
If any of the columns are not strings, use TO_CHAR to make string versions of them.
For example:
SELECT TO_CHAR (A_ID, '9999999')
     || '   '          -- leave a little space between the left-justified a_id and the right-justified a_name
     || RPAD (A_Name, 25)
     || RPAD (A_Address, 50)
     ...Edited by: Frank Kulash on Nov 14, 2009 10:11 AM

Delete records from tableA which are not in tableB

Table A contains milions of records which is the best way to delete records from tableA which are not in tableB
delete from tableA where empno not in (select empno from tableb)
or
delete from tableA where empno not exists (select empno from tableb
where b.empno=a.empno)
any help

Hi
If you can do this, do with this:
create table tableC
as select a.*
from tableA a,
(select empno from tableA
minus
select empno from tableB) b
where a.empno = b.empno;
drop table tableA;
rename table tableC to tableA;
Ott Karesz
http://www.trendo-kft.hu

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

Assuming all the device(s) have been synced to this computer as its Home computer. The easiest way would be to delete all the apps from iTunes. After which connect your device(s) to the computer (iTunes) and transfer purchases from the device(s) by right click (control click) the device name in the left sidebar and the click transfer purchases. When done only the apps on your device(s) will be in you iTunes library.
Hope that helps

How do i check the list of invoices which are not posted into sap.

Hi All,
Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
(Non po transaction is th eone with out reference of a PO)
How to check and list out the invoices that are not posted in sap. where does this get stored.
please help.
Thanks
jyothi.

Hello Jyothi,
U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice.

List of materials from the excel which are not posted

I have written bdc,
that ware house storage locations should not be allowed.
All the storage locations in the table T320 are ware house storage locations.
so i have written
if not it_data1 is initial.
SELECT * into table iT_320 FROM T320
for all entries in it_data1
where WERKS = it_data1-werks and
           LGORT = it_data1-lgort.
endif.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                          lgort = it_data1-lgort.
IF sy-subrc = 0 .
    delete it_data1 index sy-tabix.
ENDIF.
endloop.
So its working fine till then.
but i wanted a list of materials from the excel wch are not posted,so tht the user is aware tht some items are not consumed.
How to display that list in bdc.
Please give the code for that.

MY EXCEL DATA IS IN IT_DATA1.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
                                          lgort = it_data1-lgort.
IF sy-subrc = 0 .
    delete it_data1 index sy-tabix.
ENDIF.
endloop.
LOOP AT IT_DATA1 .
    MOVE-CORRESPONDING IT_DATA1 TO IT_DATA_h.
    Collect it_data_h.
ENDLOOP.
Clear it_data_h.
clear : it_data1.
THEN MY BDC IS LIKE THIS.
LOOP AT IT_DATA_H .
perform bdc_dynpro      using 'SAPMM07M' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'RM07M-WERKS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MKPF-BLDAT' LV_DATE .
perform bdc_field       using 'MKPF-BUDAT' LV_DATE.
perform bdc_field       using 'RM07M-BWARTWA' '261'.
perform bdc_field       using 'RM07M-WERKS' IT_DATA_H-WERKS.
perform bdc_dynpro      using 'SAPMM07M' '0421'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSEG-WERKS(03)'.
CLEAR : FLAG1, W_FLAG.
LOOP AT IT_DATA1 WHERE aufnr = it_data_H-aufnr.
W_FLAG = 1.
CONCATENATE 'MSEG-MATNR' '(' W_FLAG ')' INTO W_MATNR_C.
perform bdc_field       using W_MATNR_C
                               IT_DATA1-MATNR.
CLEAR : QTY.
QTY = IT_DATA1-ERFMG.
SHIFT QTY LEFT DELETING LEADING SPACE.
END LOOP.
NOW HOW TO COMPARE THE MATERIALS IN EXCEL AND BDC POSTED.
PLEASE PROVIDE THE CODE FOR THAT AND HOW TO DISPLAY.

Identify tables which are not used in any access seq.

Hi
Need to identify those tables (A500 - A999) which are NOT used in any access sequence (table T682I).
Not sure how to do this.
Thanks for the help

Hi Karen,
if you don't want to use SE11 and see it on one glance, you could use the following coding:
DATA: it_t682i TYPE TABLE OF t682i,
      wa_t682i TYPE t682i,
      it_missing TYPE TABLE OF t682i,
      wa_count TYPE kotabnr VALUE 499.
SELECT * FROM t682i INTO TABLE it_t682i
              WHERE kvewe = 'A'
              AND kotabnr BETWEEN 500 AND 999.
DO.
ADD 1 TO wa_count.
READ TABLE it_t682i INTO wa_t682i
             WITH KEY kotabnr = wa_count.
IF sy-subrc <> 0.
    CLEAR wa_t682i.
    MOVE wa_count TO wa_t682i-kotabnr.
    APPEND wa_t682i TO it_missing.
ENDIF.
IF wa_count = 999.
    EXIT.
ENDIF.
ENDDO.
BREAK 'your user'.
The table it_missing is just a quicky solution, you could use a table with just one field or use write to print the result.
Hope that helps!
Regards
Nicola

How to get the data from a table which are availble in MD04

Hello,
Can you please let me know the tables in which the 'data available in MD04' are stored.
I would like to have the data pertaining to the customer order/Item with requirements available in MD04.
Thanks and Regards,
Jana.

Probably the easiest way in this case is to run the performance trace (System/Utilities/Performance trace). Start transaction MD04, put on the trace in another window, press enter to see the stock/requirements list, then stop the trace and list the results. Then you'll see which tables were accesses with which queries.

I have the iPhone5S and my photo's are not syncing.

When I sync with my desktop, many of my photo's are not syncing. Instead of displaying the photo, a gray square is displayed with a ".jpg" in the middle of the graphic. Is anyone having this issue?

I found out what to do. All I had to do is Invite her from the Calendar I want to share from the iCloud control panel. Then she had to accept it and sign in to her iCloud account. Awesome!

How to store data file name in one of the columns of staging table

My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
Abhay

Pl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini

Trying to access row values in a table which does not have any rows yet

try{
                         MappedRecord importParams = recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS");
                         IFunction function1 = client.getFunctionsMetaData().getFunction(funModGetDet);
                         IStructureFactory strucFact = interaction.retrieveStructureFactory();
                         response.write("try2 :"+pnumber);
                        IRecord structure = (IRecord) strucFact.getStructure(function1.getParameter("PERNR_TAB").getStructure());
                         response.write("try111 :"+pnumber);
                         structure.setString("PERNR",pnumber);
I am getting the following error "Trying to access row values in a table which does not have any rows yet " where PERNR_TAB is a table containing field "PERNR".
Can anybody help me out?

Please re-post this question in the appropriate forum. It seems to have nothing to do with Web Dynpro.

How to create entity for the table which is not having the primary key

Hi,
Is it possible to create an entity for the table which is not having the primary key.
I have to write a method in my session bean and that method must use this entity.
any websites for this.

If you are talking about processes launched from a JVM (running outside), Process is available.
If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

HT201272 I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

If you downloaded it on your computer's iTunes then it should be in the Books part of your library, if you downloaded it on an iOS device then it should be in the Music app on it. If it's not there, and you don't have a copy of it on your backup of your library, then you will need to try contacting iTunes Support and see if they will grant you a re-download (audiobooks are currently a one-time only download from the store, which I believe is a requirement from audible.com who supply them) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Problem with Signing in itunes with my id. After signing in it does Not Show the Apple id and they are asking 3 Times if i wanna download Songs I have already bought but which are not on this iphone

Dear community, I'm experiencing a problem since 2 days, that if I sign in in my iTunes account with my Apple ID on my iPhone it doesn't show at the end if scrolling down the ID details and credit anymore. If I try to download songs I bought once but which are not on this device anymore, it asks me 3 times for the ID and password. I fill it in but at the end nothing happens. I see only in the middle a moving symbol.
What can I do? Apple ID and password are correct . I canceled all settings but same as before.
Many thanks in advance.

AJ Green wrote:
My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing. You need to enable location services.
Your wifi-only iPad does not have GPS. Read the specs for your device.

I am trying to use a website that requires that my computer have the lastest version of Java, which I have updated and installed, however Firefox does not recon

I am trying to use a website that requires that my computer have the latest version of Java, which I have updated and installed Java 7 Update 51 (64-bit), however Firefox does not recognize that I even have Java on my computer. My computer is 64-bit
When I run "Verify Java Version" it show nothing is installed... but it is, I know that for a fact because it shows in my "Control Panel/Programs/Programs and Features".
When I go back to the Java Download page, the following message is visible:
"We have detected you may be viewing this page in a 32-bit browser. If you use 32-bit and 64-bit browsers interchangeably, you will need to install both 32-bit and 64-bit Java in order to have the Java plug-in for both browsers."
My question is this:
Is there a way to change my Firefox browser from 32-bit to 64-bit.... because it appears that this is way Java is not functioning properly?

Firefox needs 32-bit plugins, so you'll need to install 32-bit Java for Firefox.
No, you can't change Firefox from 32-bt to 64-bit. There is a Nightly 64-bit version (alpha) of Firefox, but it is used only to test for regressions until development is resumed.

We have the invoices in staging table which are not posting to EBIZ

Similar Messages

Maybe you are looking for