We have three Ipads in our house.  We have one itunes account with multiple devices like two Iphones and Apple TV.   My question is about our three Ipads.   How can I set up the imessaging and facetime on all three devices while only using one Itunes acct

Okay.  We have three Ipads in our house with only one Itunes account.   When I go into imessaging and facetime on each of the devices, it wants to start switching my wife's cell phone and then the three emails associated with each Ipad to the contact information for all of the Ipads.    As of this morning, only the imessaging and facetime are turned on my wife's iphone and ipad.   My kids imessaging and facetime is turned off.     Do you really have to have an itunes account for each device to make then work???    Any help would be very much appreciated.
Ryan

There is only one solution. Each user must have their own separate user account. All of their respective data would be contained in their separate user accounts. This also means each will have a separate iTunes Library. If you all use the same third-party apps, then each will have to purchase their own copies under their own Apple IDs. Some data sharing is possible. See:
iTunes- How to open an alternate iTunes Library file or create a new one
iTunes- How to share music and video
iTunes- How to share music between different accounts on a single computer
iTunes- Setting up Home Sharing on your computer

Similar Messages

  • How can I set up the IOS7 calendar to show ALL DAY events on Notification Center?

    Really want to see the event in the day, not only the day before.

    You will need to enable file sharing in System Preferences
    as well as setting up sharing and permissions for the
    directories that you want shared.  You may also want to
    setup a non-administrative user or allow limited guest
    access.  The user would require entering a user name and
    password to make the connection, but would allow remotes
    to change files, if set up tat way.
    As for serving iTunes media, better to post in the iTunes forum.

  • How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

    How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
    This would be an SMS group similar to an email listserv but running on the SMS network
    I have seen private individuals offering this service
    It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
    Steve

    I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

  • HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

    have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not  be detect to my computer? what can i do? please help me..

    You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
    However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • How can I distinguish between the first and the rest in Smartforms??

    I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Regards,
    Subhasish

    >
    Subhasish Ganguly wrote:
    > I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Hello Vamshi,
    As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
    You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
    I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
    Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
    Cheers,
    SUhas

  • How do I set up the "Objects and Attachments"

    Hi .... I'm new at WorkFlow (and SAP for that matter) and have inherited a WF that is already built.  In several of the steps I can see "Objects and Attachments" on the work item screen where a User can click to be directed to a transaction. For example, on one screen the User can click on "Incoming Invoice: 5105601690" to be directed to the Invoice Display Screen that is populated with information for that particular invoice (5105601690).
    I am looking at the WF using TCode SWDD and cannot figure our how the original developer set this up.  So my question is ..... for a particular WF step, how do you set up the "Objects and Attachments: area so that the User will be directed to a particular transaction when he/she clicks on it.
    Thanks in advance, and sorry for such a "juvenile" question.
    Dan A

    Thanks for your reply Rajkumar,
    I am looking at the screen you have directed me to.  Business object is BUS2081 (actually it is ZMMWBS2081 which is a customized version BUS2081) Method is "Display" and Attribute is "InvoiceDocNumber".  How do I know by looking at this that "Display" means Display Invoice?  What if I wanted to display the PO instead?
    Thanks for the "spoon feeding".
    Dan A

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • How can i find out the resolution and accuracy of PXI-6602 module?

    I have a 32 bit  8 channel PXI-6602 counter module.  PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

    Hi chandhu,
    Were you referring to the accuracy of the count register or the timing clock? 
    PXI-6602 specifications can be found in the NI 660x Specifications.  The resolution of the count register is, as you’ve noted, 32 bits.  This corresponds to a maximum count value of 4,294,967,295.  As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
    On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal.  Again, this is all found in the specifications.
    You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
    I hope this helps.  Please post back if you have further questions.
    Ed W.
    Applications Engineer
    National Instruments

  • How can i ensure that the time capsule back up all my data?

    how can i ensure that the time capsule back up all my data and no any data missed during the back up? becz i was backing up my mac to time capsule for the first time and it takes only 5 hourse for 279GB which is doesnt make sense
    any idea, how to ensure that all my data been backed up

    well this tells you why you are having issues.. since you have a filevault and unless you are logged on as that user TM has no way to backup the vault.
    so that is why the backup is so small.
    And you cannot remove the file vault because the disk is too small.. you are in catch 22..
    You cannot backup and you cannot remove the vault..
    Login as the user who has the file vault and copy the files off the computer to a directory on the TC.. Then just delete the files on the computer.. that will then allow you to remove the file vault.
    But never  will I ever use file vaults so I am being theoretical .. please read it up yourself.
    http://pondini.org/TM/25.html
    You are not doing the background reading you need to understand what you are doing..
    read the whole of pondini's info.. or at least skim it so you know what is there.
    Avoid like the plague file vaults..
    When disks go belly up, as they always do.. your files will be lost. Somewhere they need to be stored in the clear.. so why bother .. put better security on the computer and forget vaults.

  • How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    This feature has been removed from Pages 5 along with over 90 others:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Pages '09 is still in your Applications/iWork folder.
    Trash/archive Pages 5 and rate/review it in the App Store.
    Peter

  • HT3529 I can't set up my imessage or facetime with my email because it says "Unable to verify email because it is already in use" which it was with my old ipod but how do i reset it or whatever so that it works with my current ipod?

    I can't set up my imessage or facetime with my email because it says "Unable to  verify email because it is already in use" which it was with my old ipod but how do i reset it or whatever so that it works with my current ipod?

    Try here:
    iOS: FaceTime is 'Unable to verify email because it is in use'

  • HT1349 How can i find out the size and length of my playlist?

    How can i find out the size and length of my playlist? Anybody?

    It shows up in iTunes on your computer as seen here:

  • How do you set up the stock and weather ticker on notifications?

    How do you set up the stock and weather ticker on notifications?

    The next question will be what weather and stock apps will display data in Notifications similar to an iPhone. Sure there are lots of apps available but nothing I found will duplicate the features found on the iPhone.

  • HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

    I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

    Welcome to the Apple Community.
    Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
    However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

Maybe you are looking for

  • Problem in getting selected values from multiselect list

    Hi, I have two multiselect listboxes in my page. In List1 the data will be retrieved from DB and listed.I will have buttons to move the values from List1 to List2 and viceversa. After selecting the needed values,I can rearrange them in List2 using so

  • Set location of component in a container

    I'm looking for a way to exactly specify the location for a component in a container. For example let's say i have some JPanel and i want to add a JButton to it at coordinates x=100, y=50. Is this even possible? All the lay out managers seem to preve

  • XmlList problem in parseXML(event)

    Hi All, Working on an image app, and need to list visually my images from xml file as in 1 2 3 4 5 6 7 8 9 10 but am instead getting 0 1 2 3 4 5 6 7 8 9 How do I get rid of the 0 and have it start a 1 2 3 4 etc... Code attached ;) Kind Regards, Boxin

  • About Audigy 2 ZS

    Hello people , I just got my fresh installation of Windows Vista Ultimate and I'm the owner of a Soundblaster 2 ZS. After installing my Creative Drivers (The ones in the Installation CD) I had some sound problems (the sound would distort after some t

  • SAP Script/ALE/IDOC

    I need overview of SAP Script/ALE/IDOC, can you plz provide sap library link