We need to transfer amount from one profit center to another profit centers

Dear Gurus,
We need to transfer amount from one profit center to another profit centers, wrongly posted how to do it?
GL 600000 Sales a/c Domestic,
around 5000 FI documents has post in worn profit center
In the billing with material line items showing the correct profit center.
we want reverse the GL 600000 a/c in our system what will be the impact in COPA Reporting. and how to do it?
Pls advice me for the above said issues as we are nearing the year end pls help me.
Thanks..Srirama

Hai,
You can do profit center posting 9ke0
Profit center will derive from Material in your case it seems some subtitution changing the correct profit center in material master and putting this wrong profit center
Profit center is not the deciding factor for COPA reports so there wouldn't be any impact in COPA report
BR
VSN

Similar Messages

  • Need to transfer data from one external hd to another hd

    Hi, I need to transfer movies from one external hd to another external hd - destination hd is formatted currently as NTSC, source hd is formatted currently as Mac OSx extended (journalled).
    I believe I need to transfer data across to different hd before I can reformat source hd to MSDOS - fat. Then after reformatting source hd I want to transfer data back from destination hd to source hd, to allow this to be viewed on TV & PC...
    I have tried copying & dragging from one to another, doesn't work (on desktop, or in Finder).
    Any help welcome, thank you.

    When you reformat a drive it erases all data. You'll need to buy a second external drive.
    Note: you can reformat a single partition on a drive. More info
    I like the Seagate USB 3.0 Backup plus drives. Works on USB 2.0 ports. They come formatted for PC but easy to format in Disk Utility.
    I don't recommend Western Digital because of the boot problem with some of their drives. LaCie makes good drives. All Mac formatted drives will cost more and it’s easy to reformat with Disk Utility. Do not use the software that comes with the drives. It’s recommended that you use Apple’s Disk Utility.
    Prices vary but this gives you an idea of what you’ll find. As you notice the second and third TB is usually only $15 more per TB. It's not uncommon to find a 1T is more than the 2T
    Current Amazon pricing:
    Seagate Backup Plus 1 TB USB 3.0 $154.85 (used to be around $85.00)
    Seagate Backup Plus 2 TB USB 3.0 $114.95 (used to be around $99.00
    Seagate Backup Plus 3 TB USB 3.0  $129.90 (used to be around $115.00)
    Locally, Best Buy seems to have the best prices.
    Occassionally you'll find the 3T for $99 on sale.

  • Hyperion Planning Employee move from one cost center to another

    Hello,
    I need to move employee from once cost center to another, is there anyway beside alternate hierarchy, please let me know is there any other way. I am using 11.1.2 EPM version.
    Thank you,
    TKhan

    Are you using out of box functionality of Workforce?
    You can use the transfer functionality to transfer employee from one Cost Center to another? If Cost Center is not your entity dimension then you need to customize the out of box rules a bit.
    How will alternate hierarchy help you in this case? Employee and Cost Centers are seperate dimensions or are they clubbed in one.
    I think it should be the former case, isnt it?

  • Transfer of amount from one profit center to another profit center

    Dear Gurus,
    1. We want to transfer amount from one profit center to another profit center,  wrongly posted how to do this? what is the t code for this?
    2. We developed on drill down report report painter, newly we have added one profit center in that report but values are not picking in that report how to map it? Please help me
    Pls advice me for the above said issues as we are nearing the year end pls help me.
    Regards
    Jaya

    Hi..
    1."We want to transfer amount from one profit center to another profit center, wrongly posted how to do this? what is the t code for this?"
      Ans: You can transfer through Assessment Cycle or Distribution cycle
              a) Creat Assess cycle 3KE1 and Execute in 3KE5
              b) Creat Dist cycle in 4KE1 and execute in 4KE5
    2. "We developed on drill down report report painter, newly we have added one profit center in that report but values are not picking in that report how to map it? Please help me"
        Ans: Goto KE82 and select your report . In selection charac include new profit centre in profit centre group used in your report.
    kkumar

  • Transfer of Customer balance from one profit center to another profit cente

    Hi,
    Actually we  are working in SAP version 4.7, and now i want to transfer some accounting document from one profit center to another profit center like in a customer a/c lots of documents are showing in different profit balance and right now i want to change the profit center in some documents, pls advice how can we do the same in Detail if possible provide any user manual related to that.
    Thanks  & Regards
    Sandeep

    Once again, this are you possibilities:
    You can use the PCA allocations like 3KE5 (assessment) or 4KE5 (distribution) or the manual PCA posting trnsactions 9KE0 or 1KEL.
    If you speak about cost element accounts that are assigned to real account assignment objects and you have changed the assignment of the profitcenter to the CO-object (like in the cost center master data, WBS element, internal order master data and so on) you can repost the respective accounting document into PCA. Please have a look in SAP note 858363 for more information regarding that.
    Best regards,
    Andreas

  • FB05 - To trnasfer the amounts from one Bank account to another

    hi,
    My Client is using a Z transaction to transfer the amount from one bank account to another where FB05 is getting triggered.
    Because of this a wrong profit center is getting picked up than usual when a specific assignment and text is used. I tried to use the same assignment in development sytem manually but worng profit center didnot get posted as expected. I also checked the 3KEH for the specific GL account but the PC linked there is different from the one which is getting picked up.
    Any pointers towards this would be of great help. Thanks a lot in advance.
    Regards,
    S.Sumana

    solved by myself

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • Bdget Transfer from One Fund Center to another Fund Center

    Dear Frieds,
    I can able transfer the negative budget from One Fund Center to another Fund Center which is wrong and want to control the same.
    I can use the SAP Note:983853 but still finding the same error.
    can any one please help me to restrict the negative transfer of One Fund Center to another Fund Center.
    Thanks and regards,
    Mahendra Dev.

    Dear Eli,
    Thanks for your reply.
    I will explain what config I did in my system.
    Step 1. DEFINE KEY FIGURE - ZZCURRENT_BUDGET followings are the properties
    Plus/minus sign     version     category     value type     activity     budget type     WF status     fiscal year
    +                            0      9F         B1     ENTR          *          P           -1
    Step 2. DEFINE CHECK LIBRARIES FOR BUDGET ADDRESS - Create a new consistency check copying 0000002
    i. PREREQUISITE  u2013 Leave Blank u2013 not able to understand what validation need to put.
    ii. CHECK             -  Left Operand- Key figure - CURRENT_BDGT_BT
                                   Scaling factor u2013 100.00
                                   Operatoru2013 Greater than or equal to
                                   Right Operand u2013 Key figure - ZZCURRENT_BUDGET
    iii.MESSAGE       - Message Class u2013 FMCC
                                 Message Type u2013 E
                                 Message Number-001
    Step 3. ASSIGN BUDGET ADDRESS CHECK LIBRARIES -  Created Library can assign here.
    Kindly let me know were I did the mistake in my config.
    Thanks MD.

  • How do i transfer data from one internal tabe to another.

    Hi All,
             How do i transfer data from one internal tabe to another.
             Can i do it ebven if he tables are different in structure.
    Please Advice.
    Thanks in advance.

    Hi Saket Tiwari,
    I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
    explanation of how you can populate an internal table.
    1) Append data line by line.
         Syntax :  APPEND [<wa> TO / INITIAL LINE TO] <itab>.
    this appends new line to internal table <itab>.
    2) Using COLLECT statement.
                 COLLECT is another form of statement used for populating the internal tables.  Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
         Syntax : COLLECT [<wa> INTO] <itab>.
    3) Using INSERT statement
         Syntax  INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
    INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
    Now coming to your request..
    To append part or all of an internal table
         Syntax
                  APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
    *     Note:
    Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
    b) To insert part or all of an internal table into another internal table
         Syntax
              INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
              INTO <itab2> [INDEX <idx>].
    c) Using Move statement.
    To copy entire contents of one table into another in one execution
         Syntax MOVE  <itab1> To <itab2>.
                   OR
              <itab1> = <itab2>.
    but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
    These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line  the syntax becomes,
    ITAB1[] = ITAB2[].
    Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
    for this we use    
                                MOVE-CORRESPONDING <itab1> TO <itab2>
        this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
            sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
    I hope the information provided has been of your help.
    Reward if useful.
    Regards,
    Jose

  • How do I transfer data from one exterior harddrive to another?

    How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

    Depends what you want to transfer...
    A few more Details about what you are trying to achieve would be good.

  • I want to transfer funds from one itunes account to another....How?

    How can I transfer funds from one itunes account to another?

    If they include a completely unspent gift card's balance, click here and ask the iTunes Store staff to put it back onto the card. Aside from this, it's not possible.
    (104990)

  • HT1711 can u transfer music from one itunes account to another if belonging to the same household

    Can you transfer music from one itunes account to another if in the same household ??

    You can give the person a copy of the song files, which they can then add to their iTunes library.

  • HT1918 can we transfer credit from one itunes account to another?

    can we transfer credit from one itunes account to another?

    If you haven't spent any of it, the iTunes Store staff can put the balance back onto the card, which can then be redeemed into another account.
    (84293)

  • How do I transfer Pages from one user account to another

    How do you transfer Pages from one user account to another on the same Mac?

    Welcome to the Apple Support Communities
    If you haven't modified anything, Pages is installed on /Applications. All users have access to this folder, identified as "Applications" on the Finder sidebar, so you don't have to move anything, because Pages will work on all your users.
    If you have installed Pages on ~/Applications (being ~ your user folder), then you have to move Pages to /Applications. After doing this, you will be able to access to Pages on all users

Maybe you are looking for

  • Two-column text

    This is driving me nuts. It's not that often that I import text into InDesign. I've got two column page formats set up for an index. I'm placing the index text, which is an RTF file, into this two-column format. And, it just boringly splats itself ri

  • Creating smartform from attachment list of service object

    Hi,    How can i create a smartform containing attachment list from generic object services(active workflow Box) in tcode VA02, Also let me know in which table this attachment lists are stored. Thanks,    JP

  • Advances from Vendor

    Dear experts, Here we have scenario like security deposit from vendors. How to handle this issue. I have posted by creating a seperate Spl GL indicator  entry was like   40  Incoming bank a/c                           39 A venodr A/c What is clearing

  • BEx Variable Input Parameter

    Hi everybody, I am doing a BEx report and I have created User Exit variables and Text Variables based on InfoObjects that exists in the InfoCube. But I am needing a Globla Variable, that is not related to the InfoObjects in the InfoCube; depending of

  • Is it possible to link a topic from another help file?

    I apologized if topic has been discussed/answered. I was wondering if it is possible to link a topic from another help file? So, basically my client has a help file .chm that was created by someone else. I am brought in to create another help file. s