Web authentication started with outlook?

Possible? how?
Thanks

web auth should kickin when u open outlook is it? if so AFAIK, its not possible
Regards
Surendra

Similar Messages

  • Outlook 2013 slow to start with Outlook 365 on Windows 7

    Hi,
    I get to work, start up my PC. It's windows 7.
    The first thing I do is kick off Outlook 2013 which piggy backs off office 365.
    It takes a minute for the splash screen to appear, another minute of watch dots fly across the splash page then a minute while add-ins get applied.
    Why does it take so long for the first two phases to complete?
    What add ins do I actually need? I've disabled those I think surplus to requirements, but in reality if Outlook 2013/0ffice 365 need them why do they need to be added in at all?
    Thanks.
    K
    Note: this post was originally at
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-slow-to-start-with-outlook-365/45b18f1c-5c70-4d69-aea7-4562efbe147f?rtAction=1392808530575
    but I have since been advised to post it here to.

    Hi,
    According to your description, outlook 2013 connects to Exchange online server very slowly.
    If yes, we can try the following methods to narrow down the cause of the slow performance:
    1. Try start your Outlook in  safe mode, and check the launch speed;
    2. Check if you have enabled  Cache Exchange Mode, if no, enable it and try start Outlook, and check the launch speed;
    3. Create a new profile with no email account, try start Outlook, and check the launch speed;
    4. Create a new Profile with the other email account, try start Outlook, and check the launch speed;
    Since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum:
    http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Thanks for your understanding in advance.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • ISE 1.2 web authentication problem with wired clients

    Hello,
    i am having problems with centralized web authentication using a Catalyst 3650X with IOS 15.0.2 SE01 and ISE 1.2.
    Redirecting the client works fine, but as soon the client opens a web browser and ISE websites open to authenticate the client, the switch port resets, the authentication process restarts and the session ID changes. After the client enters the credentials a session expired messages appears on the client and i get an 86017 Session Missing message in ISE.
    here the output form the debug aaa coa log.
    Any ideas
    thanks in advanced
    Alex
    ! CLIENT CONNECT TO SWITCHPORT
    ISE-TEST-SWITCH#show authentication sessions interface gi0/3
                Interface:  GigabitEthernet0/3
              MAC Address:  001f.297b.bd82
               IP Address:  10.2.12.45
                User-Name:  00-1F-29-7B-BD-82
                   Status:  Authz Success
                   Domain:  DATA
          Security Policy:  Should Secure
          Security Status:  Unsecure
           Oper host mode:  multi-auth
         Oper control dir:  both
            Authorized By:  Authentication Server
              Vlan Policy:  N/A
                  ACS ACL:  xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
         URL Redirect ACL:  ACL-WEBAUTH-REDIRECT
             URL Redirect:  https://nos-ch-wbn-ise1.nosergroup.lan:8443/guestportal/gateway?sessionId=AC1484640000026B28C02CDC&action=cwa
          Session timeout:  N/A
             Idle timeout:  N/A
        Common Session ID:  AC1484640000026B28C02CDC
          Acct Session ID:  0x0000029C
                   Handle:  0x8C00026C
    Runnable methods list:
           Method   State
           dot1x    Failed over
           mab      Authc Success
    ! CLIENT OPENS INTERNETEXPLORER -> REDIRECTS TO ISE 
    ! SWITCHPORT GOES IN ADMINISTRATIVE DOWN STARTS AUTHENTICATION AGAIN
    ISE-TEST-SWITCH#
    191526: .Jun 24 10:42:24.340 UTC: COA: 10.0.128.38 request queued
    191527: .Jun 24 10:42:24.340 UTC: RADIUS:  authenticator 7F A9 85 AB F6 4A D0 F3 - B4 E6 F2 56 74 C6 2D 33
    191528: .Jun 24 10:42:24.340 UTC: RADIUS:  NAS-IP-Address      [4]   6   172.20.132.100
    191529: .Jun 24 10:42:24.340 UTC: RADIUS:  Calling-Station-Id  [31]  19  "00:1F:29:7B:BD:82"
    191530: .Jun 24 10:42:24.340 UTC: RADIUS:  Acct-Terminate-Cause[49]  6   admin-reset               [6]
    191531: .Jun 24 10:42:24.340 UTC: RADIUS:  Event-Timestamp     [55]  6   1403606529
    191532: .Jun 24 10:42:24.340 UTC: RADIUS:  Message-Authenticato[80]  18
    191533: .Jun 24 10:42:24.340 UTC: RADIUS:   E0 3C B2 8C 89 47 67 A8 69 F5 3D 08 61 FF 53 6E          [ <Ggi=aSn]
    191534: .Jun 24 10:42:24.340 UTC: RADIUS:  Vendor, Cisco       [26]  43
    191535: .Jun 24 10:42:24.340 UTC: RADIUS:   Cisco AVpair       [1]   37  "subscriber:command=bounce-host-port"
    191536: .Jun 24 10:42:24.340 UTC: COA: Message Authenticator decode passed
    191537: .Jun 24 10:42:24.340 UTC:  ++++++ CoA Attribute List ++++++
    191538: .Jun 24 10:42:24.340 UTC: 06D96C58 0 00000001 nas-ip-address(600) 4 172.20.132.100
    191539: .Jun 24 10:42:24.349 UTC: 06D9AC18 0 00000081 formatted-clid(37) 17 00:1F:29:7B:BD:82
    191540: .Jun 24 10:42:24.349 UTC: 06D9AC4C 0 00000001 disc-cause(434) 4 admin-reset
    191541: .Jun 24 10:42:24.349 UTC: 06D9AC80 0 00000001 Event-Timestamp(445) 4 1403606529(53A95601)
    191542: .Jun 24 10:42:24.349 UTC: 06D9ACB4 0 00000081 ssg-command-code(490) 1 33
    191543: .Jun 24 10:42:24.349 UTC:
    191544: .Jun 24 2014 10:42:24.365 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-RELEASE
    191545: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-IPEVENT: IP 10.2.12.45| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT IP-WAIT
    191546: .Jun 24 2014 10:42:24.382 UTC: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC 001f.297b.bd82| AuditSessionID AC1484640000026B28C02CDC| AUTHTYPE DOT1X| EVENT REMOVE
    191547: .Jun 24 2014 10:42:24.390 UTC: %EPM-6-AUTH_ACL: POLICY Auth-Default-ACL-OPEN| EVENT DETACH-SUCCESS
    191548: .Jun 24 2014 10:42:26.353 UTC: %LINK-5-CHANGED: Interface GigabitEthernet0/3, changed state to administratively down
    191549: .Jun 24 2014 10:42:27.359 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to down
    ISE-TEST-SWITCH#
    191550: .Jun 24 2014 10:42:36.366 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to down
    191551: .Jun 24 10:42:40.592 UTC: AAA/BIND(000002A7): Bind i/f
    191552: .Jun 24 2014 10:42:41.129 UTC: %AUTHMGR-5-START: Starting 'dot1x' for client (001f.297b.bd82) on Interface Gi0/3 AuditSessionID AC1484640000026C28C2FA05
    191553: .Jun 24 2014 10:42:42.580 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/3, changed state to up
    191554: .Jun 24 2014 10:42:43.586 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/3, changed state to up
    ! SESSION ID CHANGES, USER ENTERS CREDENTIALS 
    ! ERROR MESSAGE AT CLIENT "YOUR SESSION HAS EXPIRED"
    ! ERROR MESSAGE IN ISE "86017 SESSION MISSING"
    ISE-TEST-SWITCH#show authentication sessions interface gi0/3
                Interface:  GigabitEthernet0/3
              MAC Address:  001f.297b.bd82
               IP Address:  10.2.12.45
                   Status:  Running
                   Domain:  UNKNOWN
          Security Policy:  Should Secure
          Security Status:  Unsecure
           Oper host mode:  multi-auth
         Oper control dir:  both
          Session timeout:  N/A
             Idle timeout:  N/A
        Common Session ID:  AC1484640000026C28C2FA05
          Acct Session ID:  0x0000029D
                   Handle:  0x2C00026D
    Runnable methods list:
           Method   State
           dot1x    Running
           mab      Not run

    Guest authentication failed: 86017: Session cache entry missing
    try adjusting the UTC timezone during the guest creation in the sponsor portal.
    86017
    Guest
    Session Missing
    Session ID missing. Please contact your System Administrator.
    Info

  • Local Web Authentication Started after Central Web Authentication

    Hi everyone,
    We have a DMZ based anchor WLC for a guest WLAN. I have this WLAN configured for central web authentication using ISE 1.2, this works correctly and can login using the guest portal.
    However, after logging when browsing to a website everything is redirected to the local web authentication page and the policy manager state for the client goes in to a WEBAUTH_REQD state. I currently don't have any layer 3 security configured for this WLAN, so from my understanding it should just be using the central authentication provided by ISE.
    Thanks for your help.
    Mark

    Hi Mark,
    Thanks - that looks very similar to ours, though I'm doing the 3850 via the CLI as the web UI keeps dying when I click into things.
    I've realsed that I unticked the Authentication servers box instead of the Accounting as I miss-read the WLC page, however while the LWA no-longer kicks in, I'm unable to pass anything except DNS traffic.  The Anchor says that the client is in "Webauth" state so it looks like it's expecting something, but ISE says it's all ok and I can see the 3850 traffic going through the process flow.
    If I attach an AP to the WLC directly and have the accounting box ticked, then it all works exactly as I'd expect - this is just, well, odd....
    Warmest
    Kev

  • Errors on my web site started with Flash Player Release a few days ago (Mar 28, 2012)

    Hi,
    I have a Flash based video player on my website.  This was designed and implemented based on an article vy Lisa Larson-Kelley.  It has run flawlessly for several years.  But, when I installed the lastest release of Flash Player a fedw days ago (Mar 28, 2012), I am now getting really annoying issues with the Flash Video Player.
    I expect that I will need to place insturctions for users on how to roll back their version of Flash Player, since this latest version is broken.
    But, many of the people who visit my site are not tech oriented (they are mostly friends and family, so, I don't expect that they will really roll back their version of Flash player.
    I am 100% certain the issue is the latest version of Flash, since these errors never occurred until I installed the latest version. 
    On my work laptop, I have an older version of Flas (10.x.x) and this probelm does not happen.  On my desktop PC at home, I have an older version of Flash 11 installed, and this problem does not happen (in IE9).  The version of Flash PLayer 11 where the issue does *not* occur is 11.1.102.63.
    On that same desktop PC, if I use Chrome, (which automatically defaults to the latest version of Flash which is 11.2.202.228, I get the problems.  So, there is no question that the issue is with the latest version of Flash and not my hardware or drivers.  I get the same problems on three different computers.
    My website has a username and password.  If someone from Adobe wants to replicate the problem send me an e-mail and I will send you the username and password.
    The videoplayer on my website is at this url:  http://www.jjjhi.com/TryMakingFlashVidPlayer/VideoPlaylist.html (but, you will need the username and password).
    The issue is that sometimes (not always) when you select a video to play, inistead of the video loading into the panel as it should (sized as 1025 x 578), instead, all you see is the control skin.  The video begins to play, but all you get is the audio.  It looks like this:
    You can recover from this error by using the skin control to make the image full screen, but, the video looks poor at fulls screen, because it is created at 1024 x 578.  You can then get the correct size by returning from full screen, but, I don't want the pepole who visit my cif\deo playet to have to go all through that.  Especially since most won't even know enough to try making the video full screen.
    This doesn't happen for every video on my web site, but, once it *does* happen once...it will happen for every video selection you make.
    This is unacceptable, and it absolutely a function of Flash version 11.2.202.228.
    Adobe:  Please fix this bug as soon as possible.
    I've implemented an HTML5 based video player and have begun populating it with mp4 versions of my video clips, but, quite honestly, the playback using HTML5 is much worse than with Flash.  I encoded the clips in the HTML5 player with the same Variable Bit Rates as in the F4V clips, and, in the HTML5 player, there are missed frames, and the audio can get out of sync.  So, I *want* to keep using my Flash Based video player, but...if Adobe doesn;t fix this, I will just dial down my VBR till I find one that is slow enough to play in HTML5 and ditch Flash.
    My HTML5 video player is here:
    http://www.jjjhi.com/TryMakingNewVideoPlayer/NewVidPlayer_option1_jth.html
    (again you need the username and password to use it, send me an e-mail and I will give them to you, I just don't want to post them in an open forum).
    Here is a bitmap of the page:  It is quite snazzy looking and is based on an excellent class from Chris Converse at Lynda.com.  But, even though it is 'snazzy looking' the HTML5 player performs poorly on an under-powered machine (like my work laptop).  It uses 100% CPU and misses frames and the audio loses sync.  The same videos encoded with the same VBR for Flash (F4V) play great, *except for the new issue described above!!!!)
    I Adobe can fix this issue with Flash Player 11.2.202.228  ASAP, else, I will  have to 'downgrade' to an HTML5 based video player, that, quite honestly does not perform as well as Flash.
    If you want to reproduce the problem contact me at my e-mail address: [email protected] and I'll send you the username and password.
    You can then prove that the problem does not exist with prior version of Flash player (before 11.2.202.228) but *does* exist with this latest buggy release.
    Thanks,
    John

    Thanks.
    I sent the username and PW to you and Chris.
    Cheers,
    John

  • Web Sharing starting up....

    Hi all
    I'm a newbie that would like to learn the basics of PHP and web applications.
    I've followed instructions and upgraded the current php on my system. I used the terminal and followed step by step instructions as i have no idea what i'm doing with that application, and coding. I tried to test a simple php file (that tells you the current date/time) in dreamweaver (soon after) and it didn't work. =(
    Well, After following more and more instructions i find my machine with a new oracle user, some sw folder with an application called fink inside it, and all sorts of little files and stuffed folders that seemed to do nothing positive for my current goal.
    I found out shortly after that i probably, simply didn't have apache up and running so once again i've folowed instruction but i've got the following issue: I'm trying to get the apache to start up by clicking the Personal Web Sharing 'start' button in the Sharing area in the System Preferences. The button works, it all goes grey which tells me that it's doing something... but unfortuantely nothing seems to be happenning. I've been through the forums and followed many terminal instructions that have been given to people with the same issues but nothing seems to be working.
    I've gone to work with all the most recent instructions and simply by using the terminal to get rid of a few #'s to get its native php kick started, and pressing that start up web sharing button in the preferences, seems to have worked fine. I haven't tested that .php file to test if its worked or not, but the Web Sharing started with no issues.
    I guess i'm a little worried that with all this tweaking and upgrading of my system that i may have i killed my chances at getting this php working on my imac, and probably injured it in other ways too.
    Can anyone give me any hints as to what i've managed to do to my machine and how i may be able to fix anything that i may have broken.
    If my novice terminology isn't helping much, i do apologise and if anyone out there is willing to help me out i'll do my best to make this all make sense.
    Nev
    imac   Mac OS X (10.4.7)  

    Hi Rick
    right.. I've been on php.net
    Gone into the intro section... copied the script from http://uk3.php.net/manual/en/introduction.php into a blank dreamweaver file. saved it as index.php and previewed the file in my safari window staright from dreamweaver (which has a root of file:///Users/.......htm)
    I get a blank screen (so i guess that means its not reading the php)
    I tried testing it locally from my works ftp area... same deal (root was like www...../test/Index.php)
    I've also tried just typing in http://192/168/0/19/~Byron/ and that isn't even showing the normal file that used to show up as standard (from the sites folder)
    which is why i'm thinking i've done something bad...
    My firewall's off =)
    It's not starting up the Personal Web Sharing (and i reckon thats the problem)
    When im just doing normal html static sites in DW its fine.. no problems with viewing locally at all. Its as soon as i introduce server technology (php) that it becomes un-viewable. (well it loads the file... it just doesn't read anything thats on it).
    Yeah its just in the Local area. I'm just trying to view pages locally, on the machine that created the files. Then upload them to the ftp server later on, once i've got it all running properly.
    Php wouldn't have NEEDED upgrading, it was just one of the things that php.net said would have been a good idea for me to do. (so i followed the advice from their site) Now i think about it, i actually upgraded php (from that site) before i found out how to unlock the native php from the system.
    Would that effect anything?
    imac   Mac OS X (10.4.7)  

  • Controller 4402 web authentication http instead of https?

    Hello,
    Does somebody know if its possible to redirect to a http page instead of https when using web authentication? with WLC 4400 and AP 1000?
    Or how not to have the certificat message?
    thanks Gael

    Yes, I tried it. It does work, although there is a noticable time lag until the cert warning pops up. Also, the controllers, as of ver 3.2.78.x, had only 30k space for text & images thus limiting what can be displayed on the webauth page. It does allow for url redirects though, but I am not sure it can parse html or not.

  • External Web authentication server for Guest access

    I have a guest wireless wlan setup. When guest users attach to our guest wireless they are prompted by the built in web security on the WLC's.
    Cisco talks about how to setup the WLC to route web authentication to an external web server, but they don't say what kind of web server to use or examples.
    I need some help on getting an external web server to do web authentication. With the server we would like to get some basic info from the user. name, email, pupose of using wlan, and some background info they don't see like, computer name, mac address. This is all for tracking purposes.
    Hotels do this type of web authentication for example.
    Any help would be great.

    Hi Patrick,
    I'm having the same problem here. I configured my WLC that redirect the login page to WEB Server, but I don't know how configure the Web Server to back the credentials to WLC. Did you can solve this problem?
    thanks!
    Claudio

  • Problems with re authentications in a wireless with WLC working with web authentication and a radius server

    Hi everyone, im having problems in a wireless network, the SSID has security layer 2 WPA, layer 3 web authentication (internal default page), and external RADIUS.
    When a client makes a roaming from one AP to another one or when he has a idle time, he needs to re authenticate in the web login page. Somebody knows a solution to avoid this behavior?. Or somebody has a troubleshooting way to determine why the clients have this problems??

    A few things I can share that might help .. Your actually feet on the ground will be importnat to see this issue for yourself.
    I know when a client or if the AP sends a DEAUTH frame the client will need to reestablish its connection and it will 100% of the time require a new web auth. If a client loses connection while roaming and a DEAUTH is sent on either side you will get the page. If youre client isnt romaing cleanly this can be a problem.
    Another problem is your using EAP. Are you using CCK or a device that supports OKC. What does your radius server say when a client roams ?
    You could also simply your config and then reapply your security and see where it breaks. By this I mean. For testing, create a SSID turn off security and leave layer 3 web auth on. Roam and see what happens. If it works, then start to apply the security and see where it breaks.
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
    ‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

  • MS Exchange portlet with Outlook Web Access

    While testing the MS Exchange 5.5 portlets, I've run into a problem where it does not create a MAPI session if you are not trying to access a local exchange server. In other words, how do I modify the asp code so the portlet will work if you are accessing Outlook Web Access?
    If Outlook Web Access is on a different domain than the asp's in the MSEXCHANGE55.zip portlet package, what else needs to be modified?

    The problem is a bit different than the post you referenced.
    Although exchange and owa existing on the server with the Exchange asp's from Oracle, the problem of authentication still exists (the asp code needs to be modified in order to fix it).
    For example --
    The domain of Oracle portal and the windows 2000 server that's the web provider for the portlet is somehost.oracle.com.
    The email server that has OWA installed (the one that has the email we want to view) is on someotherhost.ibm.com.
    When try to test the inbox.asp by trying
    https://somehost.oracle.com/exchange_portlet/inbox.asp?owapath=https://someotherhost.ibm.com/exchange
    the session with the exchange server via OWA is not accomplished.
    What needs to be changed in the code so the asp's can reside on a server that's not in the same domain as the OWA server?

  • I am using Firefox 11 and I am unable to print web pages. I can print PDFs ok. I tried to open the prefs.js file to delete anything that starts with print and I get an error message.

    I cannot print web pages. I've tried the solutions suggested like deleting anything that starts with print in the prefs.js file but I get an error message: Script: c:\users\rick\appdata\roading\mozilla\firefox\profiles\iviwh5c1.default\prefs.js
    line: 1
    Char: 1
    Error: invalid character
    code: 800A03F6
    Source: Microsoft JScript compilation error

    When editing '''prefs.js''' you need to use a simple text editor program. WinXP Notepad messes up the line formatting of prefs.js, so I use Wordpad - but you need to save the edited file in a Text-Only format (Wordpad asks about that when you go to save the edited file). I never used Win7, so I don't know if that version of Notepad messes with the line formatting of prefs.js or not.
    Another thing - make sure '''''"Hide extensions for known file types"''''' is de-delected in Windows file / folder options > view -> advanced settings. Otherwise Windows may add a .txt file extension that you won't be able to see, and that will break that file in Firefox. '''prefs.js.txt''' won't be recognized by Firefox, when is expecting to find '''''prefs.js''''' .

  • Web Service Call with Basic Authentication does not work

    If I try to use Basic Authentication in my Web Service Client with the automatically created methods
    setUsername(inUserName)
    setPassword(inPassword)
    setAddress(inAddress)
    the application does not make a call. Did I forget something?
    Is it possible to use "Test Method" with Basic Authentication?
    Thank you.

    Thank you for your answer.
    But: I already read this article. And it doesn't help me.
    I use the following code:
                getMyServiceClient1().setUsername(inUserName);
                getMyServiceClient1().setPassword(inPassword);With this code I always get a java.lang.NullPointerException.
    The methods setUsername and setPassword are definded as follows:
    public void setUsername(String inUserName) {
            myStub._setProperty(Stub.USERNAME_PROPERTY, inUserName);
      public void setPassword(String inPassword) {
            myStub._setProperty(Stub.PASSWORD_PROPERTY, inPassword);
      }But if I look at the methods which are generated automatically by Sun Java Studio Creator I cannot find _setProperty.
    I also found this thread in your forum:
    http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=54773

  • Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

    Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
    OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
    and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
    I can log on to the MS Exchange server and see the setup.
    What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
    or programs.
    What can I do?

    The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
    file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
    Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
    was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
    Follow the steps given below to resolve this problem
    1. Recover Navigation Pane configuration file
    2. Repair your Outlook PST file using Inbox Repair tool
    3. Create a new Outlook profil and import data from the old PST file
    4. Turn off Compatibility Mode
    5. Start Outlook in Safe Mode
    For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

  • The calendar week view on my iphone 4s starts on a Sunday.  I am synching with outlook on my computer which starts the week view on a Monday which I prefer.  How do I change my iphone calendar view to start the week on a Monday?

    The calendar week view on my iphone 4s starts on a Sunday.  I am synching with outlook on my computer (pc)  which starts the week view on a Monday which I prefer.  How do I change my iphone calendar view to start the week on a Monday?  I am in Australia.
    I have just noticed the other discussion points - mine is set to Australia. 
    Dear Apple - as the day that the week starts on can depend on country and religion - how about making it an option that the user can change????

    I believe the week view on the iPhone is handled by the Region settings in the phone. I am not aware of any other manner to change it, as you can with Outlook.

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

Maybe you are looking for