Web dynpro Abap : Icons not display in alv table

Hi ,
I want to replace the content of a cell by an icon ,in an alv table.
I know how I should do it, but my icon is never displayed. There is only an "X" as if the icon hasn't been find.
Did anyone encountered the same issue?
Thanks
Karim

Hi Kraim,
I hope that you have followed the [correct procedure|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9] for displaying your icons within the ALV cells. May be you are passing an invalid icon name. Just try check out the dictionary table ICON to ensure that you are using the correct one.
Regards,
Uday

Similar Messages

InteractiveForm UI Element in Web Dynpro Java - Image not displayed on form

Hello Experts,
Using: NetWeaver Developer Studio 7.0.1_06; Adobe Livecycle Designer 8.1.
I have an image "image.png" in my src/mimes/components/com.mm.InteractiveFormComp folder within my web dynpro java project.
I load the image into my context in wdDoInit method in the comp controller:
wdContext.currentContextElement().setImage("image.png");
In the interactiveform I have an ImageField on the form and have set its properties as follows:
Field - URL = http:[host]:[port]/webdynpro/dispatcher/InteractiveFormComp/src/mimes/components/com.mm.InteractiveFormComp/image.png
Field - Embed Image Data = "checked"
Binding - Default Binding = Image
However, no image ever shows up on the form. I have also been through many threads in the forums but havent found a solution. Can anyone please assist me?
Regards,
MM.

Hello,
I tried using jpg and bmp. Didn't work.
Any other suggestions?
Regards,
MM
Solved it!
Edited by: Marshall Mathers on Mar 9, 2011 9:53 PM

Web Dynpro ABAP: How to do checkboxes in table column?

Hi,
In Web Dynpro for ABAP, I have a table, where one column consists of check boxes, and the user should be able to check some boxes in some lines. In the context of my view, I created a node tied to a DDIC structure, with some attributes. The attribute where I want to see the checkboxes is of type boolean. In the layout I create an element of type table. Then I create the binding to the context node and for the columns I use cell editor of the appropriate type, that is, checkbox. However, when I test my application, there are no checkboxes at all. What am I doing wrong?
Thanks,
Ira

>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm

Web Dynpro ABAP personalization not transported to Quality

Hello,
We personalized the iView in portal with j2ee_admin credential for SRM7.0 implementation at Role level.
We got the pop up saying Do no Transport personalization and transport personalization. We chose Do Not Transport Personalization in portal.
We transport the personalization using the application WD_ANALYZE_CONFIG_USER , we transported for all user.
But when we check in the portal the personalized content is not shown.
Could anyone help on this asap since we are in phase of UAT?
Regards,
Senthil Kumar S.

Please post it in forum [SAP Community Network Forums » SAP Solutions » Floorplan Manager for WebDynpro Abap |;
Close this thread.

Web dynpro Abap not inheriting the Portal theme

Hi,
My Web Dynpro Abap is not inheriting the Portal theme. My understanding is that for NW2004, EP7, Web Dynpro Abaps would automatically inherit the Portla theme. Is there some coding required or pre-config of some sort that I have missed to allow the Portal theme inheritance?
thanks
C

Hi,
see also the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/46/89af7fbe4d429ee10000000a1553f7/frameset.htm]
Regards, Heidi

Web Dynpro ABAP calling another ABAP program

I have a question and just want to know if it's possible or not.
Is it possible to write a Web Dynpro ABAP program that calls another ABAP program which happens to be an ALV report?
Rather than re-write the ABAP ALV report, I was wondering if it's possible to call the ABAP ALV report within a Web Dynpro ABAP program and display the results within the Web Dynpro program.
If it's not possible, then I assume it would be better to re-write the code from the ABAP ALV report in the Web Dynpro ABAP program.
Thanks
John

The ALV report in your classic program is coded to be displayed in the GUI only.
Your best bet would be to create a Function Module or Method that will return the data to be used in your ALV. Simply call the Function/Method from your Web Dynpro and then bind the table to the DATA context node of the ALV INTERFACE CONTROLLER.

How to Hide ADOBE Toolbar in Web Dynpro ABAP

Hi Team,
I have an ADOBE form (Display Only) coded in my Web Dynpro ABAP application which displays data from the context of a view. I want to hide and disable the PDF toolbar. How to achieve this. I saw a method SET_HIDE_TOOLBAR, but don't know where to write code for this. The form is NOT interactive (want this only for printing). We are on Support pack 10.
Any ideas?
Thanks for your time

Hi Sanjay,
Welcome to SAP Interactive Forms by Adobe
Rgds,
Anto.

Browser Hangs iFbA in Web Dynpro Abap

Hi Support,
I'm developing an Abap Web Dynpro with Adobe Interactive Form inside.
I have setting these parameters: InteractiveForm.enabled = true, InteractiveForm.readonly = false.
Web Dynpro Page open correctly with iFbA but when I click one button in WD Page the event freeze Browser.
My system is ECC sp06, SAPKB70009 and SAPKA70009, but I can't patch the
system.
I implemented these Note:
1- Note 981638 - Dynamic forms are not supported in Web Dynpro ABAP
2- Note 1018060 - Adobe: Locale has invalid country/language combination
3- Note 999997 - Setting usage rights unnecessary with Adobe integration
Help me

Hi Enrico,
As per my understanding, you are able to view the interactiveform in your webdynpro and when you click on the button, it is getting hanged?
Have u created an event (onSubmit) in your webdynpro? set a break point in your submit event and see whether the request is reaching up to there or not?
And also.. set your form layout type as ZCL layout and activate it once.
Let me know if you still face the problem.
Regards,
Ravi.D

Web Dynpro ABAP ALV menu button icon image

Hi
Does anybody know how to add or link an image or an icon to a menu button in a
Web Dynpro ABAP ALV view?
I know how to do it in the alv table column but can't find a method for a menu button.
Best regards
Lars

Hi
Found the answer:
DATA: lr_febutton TYPE REF TO cl_salv_wd_fe_button.
lr_febutton->set_image_source( '@4B@' ).
Just used a wrong class.
Best regards
Lars

How to display an status Icon in Table UI web dynpro ABAP?

Hi Experts ,
How to display an status Icon ( Traffic light ) in Table UI web dynpro ABAP? can somebody tell with a coding example. also I need to update status on condition so whats the best way?
Thanks in advance.
Regards,

Hi Laeeq,
click on table cntrol n place it on the screen..
now click on the icon button n place it in the table control area.. a column of icons get created. name it (say) ICON.
in the PBO..
loop at internal table and call module in the loop (say) .
MODULE ICON_DISP.
now in the module try the foll code :
module icon_display output.
check some condition and assign the icon to the variable icon_r
icon_R = 'ICON_GREEN_LIGHT'.
CALL FUNCTION 'ICON_CREATE'
    EXPORTING
      name                        = ICON_R
    TEXT                        = ' '
    INFO                        = ' '
    ADD_STDINF                  = 'X'
   IMPORTING
     RESULT                      = ICON
EXCEPTIONS
    ICON_NOT_FOUND              = 1
    OUTPUTFIELD_TOO_SHORT       = 2
    OTHERS                      = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
where icon(35) and icon_r(35) type c .
hope this helps u..
Regards
Aparna

How to fix few rows in ALV after filtering on a column in Web Dynpro ABAP

Hi,
I have the following requirement:
In an ALV, when i filter based on a column, then this filter should not be applied to 2 of its rows.
These rows relate to totals. The totals are manually calculated as they require other component information too.
Along with the filter result, these total rows have to be displayed.
Let me know in case ALV in Web Dynpro ABAP supports this functionality.
Regards,
Rekha

Hi,
ALV table does not support this functionality.
You can display the total in an another table instead.
I had the same requirement with total and had to display the totals separately.
Thanks,
Feroz

Web Dynpro ABAP: Assigning of Conversion Exits in ALV

Hi,
We are currently developing a generic data display application using ALV technology in Web Dynpro ABAP. "Generic" means that the structure of the data is created dynamically during runtime (using RTTS) and that even the contained data elements are created dynamically without any relation to DDIC. The generation is based on metadata like field name, data type, length, decimals, conversion exit.
Our problem is that we were not able to find a way to assign the conversion exit of a data element ("column") in Web Dynpro ALV. Without this feature, no output conversions will take place since the data elements have no relation to DDIC. In the "classical" ALV, this could be easily done using method SET_EDIT_MASK of class CL_SALV_COLUMN.
Is there a similar method in WebDynpro ALV or at least an alternative approach to assign a conversion exit to a column or cell?
Thanks for your help in advance.
Best Regards,
Sven

Hello Sven Hader,
As you said you are generatiing the metadata like field name, data type, length, decimals, conversion exit dynamically.
Can you please let me know how you are diong this?
Meanwhile, you can try this approach to assign a Conversion exit to ALV Table column attribute dynamically.
DATA:     lv_data                         TYPE dd04v,
              lv_mode_ext2int          type   ESEBOOLE. "Conversion mode that you are in
read the data from the database
    CALL FUNCTION 'DDIF_DTEL_GET'
      EXPORTING
        name                = lv_ddobjname
        state               =   iv_object_state
        langu               =   iv_langu
      IMPORTING
        dd04v_wa         =   lv_data
      EXCEPTIONS
        illegal_input       = 1
        OTHERS           = 2.
    CHECK NOT lv_data-convexit IS INITIAL.
    CONCATENATE 'CONVERSION_EXIT_' lv_data-convexit '_INPUT'
      INTO cl_im_imp_ehs_material_erp=>mv_conversion_exit_input.
    CONCATENATE 'CONVERSION_EXIT_' lv_data-convexit '_OUTPUT'
      INTO cl_im_imp_ehs_material_erp=>mv_conversion_exit_output.
IF lv_mode_ext2int = 'X'.
    ASSIGN cl_im_imp_ehs_material_erp=>mv_conversion_exit_input
        TO <lv_funcname>.
ELSE.
    ASSIGN cl_im_imp_ehs_material_erp=>mv_conversion_exit_output
        TO <lv_funcname>.
ENDIF.
(3) call the conversion exit
CHECK <lv_funcname> IS ASSIGNED.
TRY.
      CALL FUNCTION <lv_funcname>
        EXPORTING
          input = iv_value
        IMPORTING
          output = ev_value.
      IF sy-subrc <> 0.
      ENDIF.
    CATCH cx_sy_dyn_call_illegal_func
          cx_sy_dyn_call_illegal_type
          cx_sy_dyn_call_param_missing
          cx_sy_dyn_call_param_not_found.               "#EC NO_HANDLER
ENDTRY.
Endif.
I hope it should work.
Thanks,
Bharath.K
Edited by: Bharath Komarapalem on Dec 16, 2008 2:47 PM

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

Problem with Table display in Adobe Form of Web Dynpro ABAP

Hi Team,
I'm trying to display a table in Adobe Print Form (not interactive). The table is bound to the context node in the Web Dynpro ABAP where the cardinality is 0:N. I get a short dump. Don't know what to do here. I'm able to display individual fields from my context successfully. Looks like something is missing when I try to display a table. Any pointers to display a data table in Adobe? Any step by step example you know of where I can find out what I did wrong? Many thanks for your time
We are on support pack SP06 on 2004S release.
DUMP INFORMATION:
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CREATE_PDF" "(METHOD)", nor was it propagated by a RAISING clause.

Hi Thomas,
We upgraded our system(2004S) to SP10 so that we can use the ADOBE form printing in Web Dynpro ABAP but could not apply note 1034425 because of the validity constraints in SNOTE. All the pre-requisite notes are already in the system apart from one note 1029721 which talks about supporting input helps. We don't want to use input helps in our system and cannot upgrade to SP11 because of problems with Business functionality.
Questions:
1) Is note 1034425 absolutely dependent on 1029721?
2) If NOT, can someone please correct the validity so that we can implement using SNOTE.
3) Would it be OK if we manually apply the changes specified in 1034425 without implementing 1029721?
4) If all of the above is not applicable, is there any other note which fixes the above mentioned short dump.
Your help in this matter will greatly help us in using the ADOBE services provided by SAP WDA.
Thanks much

ALV object in Web dynpro ABAP

Hi All,
I want to include ALV object in web dynpro ABAP, instead of a table in a window. I have SAP Version 4.6 as backend.
Pl help.

Hi Nirmal,
the information on ALV and WDA is here: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
As you know, Web Dynpro ABAP is availiable with NW2004s, not before.
Regards, Heidi

Web dynpro Abap : Icons not display in alv table

Similar Messages

Maybe you are looking for