Web Dynpro Screen in ESS for mySAP ERP 2004

I have uploaded the Business Package for ESS for mySAP ERP 2004 and I am expecting the Webdynpro screen to be seen, but unfortunately I am able to see only the typical R/3 screens ...
our
R/3 ver ECC 5.0
EP 6.0
Any suggestions ?

If you are using ESS for ERP2004 BP, have you deployed the XSS WebDynpro Components (PCUI100, ESS, MSS .SDAs) to your J2EE Engine?
Cheers,
Steve

Similar Messages

Adding Disclaimer text to standard web dynpro screens in ESS

Hi,
I need to add disclaimer text to the standard web dynpro screens of ESS. The disclaimer text is the same for all screens and there are around 20 different screens where I need to put the same disclaimer text on. Can anybody suggest me the best way to solve this problem.
Thanks,
Tom

HI TOM
u can specify this for each and every workset for ESS.
u used the Additional Inforamation text under each workset.
to change the text do the following
In SAP R3 ecc system go to SPRO->IMG->cross application components->Homepage framework->Areas->define areas->double click on define areas->double click on area key
(work set)
under area description tab
u can found following
Area Description heading --->Additional Information
Area Description (long text)--->
u can change both text accoriding to ur requirement and specify The disclaimer text .
this is done for all workset. one modificaton is finish.
relese the created request.
restart the j2ee server.
regards,
kaushal

Unable to find business package for mySAP ERP 2004(Rel 60.2)

Dear Experts,
I logged into SDN by using service marketplace account and tried to
download the business package for mySAP ERP 2004( Rel 60.2) from portal
content portfolio. But when clicked on the download icon, I am
redirected to Service Marketplace but I am seeing message "No Data
Available".
Is it faced by everybody or I am the only one guy who has this ill fate.
Thanks,
-Bharath

Hi,
please try again. The package should be available for download as long as you hold the required license.
Alternatively, you can send details of the error to [email protected]
Kind Regards, Anke

Dublicated Web dynpro screen in ESS

Hi Folks,
After adding iView to the page I am getting doubled screens in ESS, for example:
If I access Address service in Personnel Information, two dublicated web dynpro screens are getting called instead of one.
We have to have two iViews on the same layout
Could you recommend the solution?
Thank you,
David

Thanks Jithu for your response, but I have to have two iviews for a page. Is not it allowed? I need one for a pop up WD application and the second one for personal Information area page
Edited by: David Colch on Oct 20, 2009 10:26 AM

Modify code for MSS/ESS in MySAP ERP 2004

Hi,
I have ECC, mySAP ERP 2004, NW 2004 and need to modify standard MSS in compensation management. I imported the MSS sca into the development track but unable to get the code of ecm. Isnt this migrated in NW2004? If not how do I get the par files or source code for editting the ecm of MSS.
Please help,
Dhanya

1 - Is it par files or WD in ERP 2004 for compensation Management ? Can you tell me where can I download the standard par file ?
In ERP2004, we had par files. You can download the business package from - https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio. When you unzip the zip file, you can see the par files there.
2 - whether it is a right approach to download the standard par file, change and export it to reflect the changes liek normal portal projects?
You shouldn't be changing the standard code. Once changed, support from SAP becomes difficult. But anyways, once changed it can surely be exported like any other object.
3 - I have new WD ESS and MSS also so can I do a SCA for both the WD components and pars of portal applications into the same SCA? What is the best practise ?
Ideally, WD applications and Portal Applications should be bundled in different SCA files. The reason being, WD can be stand-alone applications running on J2EE engine (though in your case it is not) but Portal applications are meant to run in the Portal Runtime.
Regards,
Sunil

Source system icons changes when connecting SAP BW to mySAP ERP 2004

Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are based on SAP Web AS 6.40 or greater
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract both from the internal BW System and from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

Web Dynpro, ESS/MSS and ERP 2004

Hi
Where may I locate information regarding developing/changing of the new Web Dynpro application for ESS/MSS Business Packages for ERP 2004?
Have anyone had a look in how to change the applications?
Regards
Kay-Arne

Post your question in the "Integration with mySAP ERP 2004" forum.
Armin

Configuration guide for ESS/MSS mySAP ERP 2005

Hi
Can you please send me configuration guide for ESS/MSS mySAP ERP 2005.
Thanks in advance
Regards
Gauri

http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
--> mySAP ERP 2005
--> Upgrade
--> Upgrade Documentation - mySAP ERP 2005 SR2
There choose your database and operating system.
If you're looking for functional details check
http://service.sap.com/releasenotes

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

Adding an ABAP Web Dynpro application to a Java Web Dynpro screen

Hey fellow SAPers
This is an interesting one .........
We have developed a bespoke ABAP Web Dynpro screen that we want to include into a tabstrip in a Java Web Wynpro application. We have managed to do this by inserting an iFrame into the tabstrip, and then passing the UWL of the ABAP Web Dynpro app. This works. However, life is never that easy and of course whenever the screen is refreshed, the ABAP WD app is called again and so any changes to the data on the ABAP screen are lost as the data in the ABAP app is re-selected and the data returns to it's original state.
Does anyone know:
- of another way to incorporate an ABAP WD screen into a Java WD screen (as a tabstrip)
- how to de-activate a Java view so that the view containing the ABAP WD app is refreshed (i.e. the window is refreshed), the view is not refreshed and the ABAP app is not re-called .....
- any other ideas ....
of course, we could re-develop the same screen in Javam, but that would be too easy
Looking forward to your responses
Jon

>
> Hi Jon,
>
> First of all Iframe is not officially supported until 7.01 version.
I believe it is deprecated in 7.01 and re-supported in 7.02
[7.01 IFrame Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
[7.02 IFrame help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
>
> Would you not use Portal for that and incorporate two iViews in a Page?
I'm guessing you want to show this within the WDJ app not above, below to the left, right...
This is a very very difficult thing to do - I'm guessing that you are not actively passing data into the URL of the WDJ IFrame, but just have "decorated" the WDJ app with the a statically linked IFrame. In this case the only thing you have to tie the two together is the user id that you are using - and potentially the time the app was launched. You could in theory use a shared memory area (watch out for multi app server environments) to store the state of the app in case it got refreshed... but this is not a simple thing to do...
Consider if it is absolutely necessary to enhance the WDJ in place - hopefully you can just replace it with a WDA when you install EhP5
Good luck,
Chris

Trigerring BPM from Web Dynpro screen not working

Hi Guys,
I am trying to trigger a BPM process from a Web Dynpro screen so I created a BPM process and created a WSDL and consuming the WSDL in the Web Dynpro app but getting an exception "Exception on creation of service metadata for web service mass config parameters service reference ID '28af57ab-9212-4ffd-90c6-0779c78a8da3' and application name 'demo.sap.com/testwd'. Check mass configuration has been done properly."
Please assist with what I am missing.
Thanks,
-Ash

I ran into the same error when attempting to consume a Process as a web service from my Web Dynpro component. I found that it is actually succeeding in kicking off my process, but it looks like it fails from my calling component. It seems to be related to calling a service meant to be asynchronous as a synchronous service. In my case, it throws a SOAP fault "com.sap.engine.services.webservices.jaxrpc.exceptions.SOAPFaultException: Process start has been triggered" when I run it from the WS Navigator manually. It turns out that the same error is getting wrapped by the exception you were experiencing. Try using the getCause method to see if the same is true for you. This environment is still new to me so I don't have good solution on how to make it not throw that error in the first place.
[addendum] I ran across [this|Start BPM Process Trigger - Read timed out] thread that explains exactly what I had guessed. You can remove the response part of your WSDL and it will get called successfully in an asynchronous manor. Note that you must manually remove some of the entries in the WSDL since the visual editor with the 7.1 environment doesn't clean up after itself as well as it should.
Edited by: Joseph Robertson on Jan 12, 2011 11:04 PM

UWL - Records not getting into LeaveRequestApproval web dynpro screen

Hi,
We are on EP7 sp9 and ECC 6.0. We are working with UWL. In UWL, we downloaded the standard XML file and done changes for removing the other tabs except the 'Tasks' tab and also placed the refresh button on main screen. It looks fine. Now, the problem is the web dynpro screen is not pulling data from backend. Previously, when we click on 'LeaveRequestApproval' work item, we use to get ITS screen. at backend we did changes in SWFVISU transaction to get web dynpro popup screen when user clicks on 'LeaveRequestApproval' work item. We could able to get the popup web dynpro screen, but it is not pulling any records from backend.
Now, let us know where we are doing mistake? do we need any more configuration at backend? If so, let us know the work around for it.
Thanks in advance.
Kind regards,
Raj.

Hi,
But are you able to see the labels, buttons etc ? Or is it that the entire page itself is not visible ?
Please check the log file and see what is the error you get there ? Or probably check on the backend side if there is a dump.
You can also check with the debugger on the backend side...see what exactly happens on the backend when the page is getting loaded.
Cheers,
Sunil
PS: Reward points for helpful answers.

How to create PDF from a web dynpro screen

Hi all,
I am in the process of creating my first web dynpro application for parking a document, the new requirement is when the user parks the document, a PDF of the web dynpro screen should also be generated. Can you please tell me how can I achieve that.
Thanks,
Rajat

A PDF generated from the screen? There is no SAP delivered functionality to do this. I might suggest that you just use the browser print and print to a PDF generated virtual printer. Otherwise you would have to design an Adobe Form (and run it within WDA using the InteractiveForm) that matched the interface of the WDA screen. There is no automatic generation. You would have to design and maintain each independently.

Use of Variants in a Web Dynpro Screen?

Hi,
Is there an easy way to simulate the use of variants in a Web Dynpro screen, like in R/3 for a transaction?

Can you give me some example for storing text files on the Java server?
An example to manage parameters for each user, for example :
\[ZAPPLICATION\]
EQUIPMENT=300056
TYPE=ZE
PRIORITY=1
DISPLAY=True

How to hide Interactive form in Web dynpro screen

Hi all,
I am working on an application where a user will enter the vendor number and based on that vendor the information of the vendor such as his name, address should get filled in the interactive form that we have created. I am able to get the vendor information at the back end and I have created a print button and hitting on that print button will actually fill the form. But now my problem is when I run the application the form is already displayed on the web dynpro screen (without any vlaues) and when I hit print button the form gets filled with correct values but I don;t want form to be pre displayed until and unless user hits print button. Can you please tell me how can I do this.
Thanks,
Rajat

Hi Thomas,
Thanks for quick reply.
Let me explain you what I want... I am very new to webdynpro so my questions may sound very basic or may be weird.
I have an application where the user will enter the vendor number on the web dynpro screen and then will hit the button PRINT and when he hits print button the PDF form should be displayed on the web dynpro screen. So far when I run my application the vendor number (input field) is there and a print button is also there but beneath there is the whole interactive form is showing up (a balnk) and when I enter the vendor number and hit print the same form will get filled up with the required data.
What I want is when I execute my application and on the web dynpro screen only the vendor number field and the print button should be visible and not the PDF form, the PDF form should only be displayed once user hit print button. I tried to change the value of the property from visible to none and what it did was the PDF form was not visible on the web dynpro screen on both the occassion i.e. when I execute the the web dynpro applkication and after when user hits print button.
Thanks,
Rajat

Web Dynpro Screen in ESS for mySAP ERP 2004

Similar Messages

Maybe you are looking for