Web Dynpro SLD - No Visual Admin for CE 7.1

I used NWA to configure an SLD, able to ping, Collect and Send, etc. - all is good.
But when I go into Content Administrator for Web Dynpro the SLD is undefined. How do I set it if there's no VA?

Never mind .... SLD_Client .....

Similar Messages

Launch Web Dynpro iView fro Visual Composer

Hello,
I've one application with two iViews. One in VC and other in WDJ. I'm able to pass data from VC iView to WDJ iview with EPCM but in this case, the WD iView must be running to accept the data.
I need to launch WD iView when an event in VC iView is fired and pass the parameters simultaneouly. Is it possible?
Thanks,
Vishwas.

Pradeep,
Thanks for the lead.
This document is about passing data between VC and WAD (Web Application Designer) iViews. I'm already doing this between my VC and WDJ (Web Dynpro Java) iViews. However, for this to happen, both iViews must be part of the same page and running at the same time. I want to get past this limitation and launch an WDJ iView on an event from VC and pass some data, based on which, iView will dynamically pull values from backend data and display the same in Adobe Document iView.
Could you or somebody help me in this. I can always fall back to Web Dynpro Java for this requirement but before that would like to be sure about the possibility of this task in VC and WDJ.
Thanks.
Vishwas.

Security Provider for a web dynpro with tool Visual Administrator

Hello all,
after deploying successfully my web dynpro on the J2EE 7.0 WAS, I'm trying to set up authentication to it but I cannot find my applicaiton in the list of policy configurations of the Security Provider entry. When I try to add the path to my local web dynpro, the engine doesn't find it.
I have noticed that all other policy configurations reference a servlet_jsp application. Should I transform my web dynpro into a servlet_jsp? How do I do that?
Thanks for your input,
Tanguy Mezzano

Hello Marcel,
in fact, I don't succeed to redeploy with another provider name... I have undeployed my webdynpro with SDM on the Java stack, but from NWDS, when I change the application-j2ee-engine.xml and application.xml files, and that I rebuild the webdynpro, when I run and deploy, it always redeploys under the former provider: local.
When I create the application, I tell to use the existing component, should I select create a new one, but that means that I have to rebuild the whole application.
Will then the webdynpro be in the Security Provider list, so that I can configure it with http header?
Thx for your help,
Tanguy

ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

Hi,
I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP. I changed several Labels and UI Element visibility... and saved.
When I test this application config for viewing an order of type ZX99, I don't see my changes. If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
Why my Z config is overrided by this one???
By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
How to manage to make my Application Config highest in priority?

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

In web dynpro i want explanation/definition for the following things

Hi dudes,
I want explanation *** definition for the following
(1) web dynpro
(2) Cardinality
(3) methods
(4) Nodes
(5) Attributes
(6) Interface
(7) Views
(8) Windows
(9) Mapping
(10)Binding
(11)Model
(12)Controller

Hi,
Here are the defintions for the terms you hav requested-
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms
Extensive platform independence of interfaces
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
A Web Dynpro component is a reusable entity. It summarizes all components that are
required as part of this programming unit for an executable Web Dynpro application.
The Web Dynpro component concept offers a number of advantages:
Structuring of the programming
Creation of easily manageable application blocks
Reusability of whole components
Decoupling of software projects in both time and space
The Web Dynpro component contains any number of windows and views and their
corresponding controllers. Additional Web Dynpro components can also be referenced.
View
A view describes the layout and behavior of a rectangular area of a user interface.
Every Web Dynpro application has at least one view. The layout of a view is made up of
different user interface elements, which can be nested in each other. The positioning of
interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The
data to which the elements of the view can be bound are stored and managed in the view
context, enabling them to be represented or used on the screen. The view controller can
contain methods for data retrieval or for processing user input.
Window
A window is used to combine several Views and View Sets (the concept of view sets is only
offered in Web Dynpro for Java). A view can only be displayed by the browser if it has been
embedded in a window. A window always contains one or more views, which are connected
by navigation links. One of these views, or a view set, is specified as the start view and is
displayed the first time the window is called.
Windows have inbound and outbound plugs.
Inbound Plugs and Outbound Plugs
A window has one or several inbound or outbound plugs. Using these plugs, a window can be
included into a navigation chain. The concept of these plugs corresponds to the concept of
the plug for a view. Each plug of a window is visible within the entire window and can be used
for navigating within this window. In addition, one or several plugs can be made accessible to
the component interface so that they are visible even beyond the limits of the component in
question. They thus belong to the interface view of the relevant window.
They are used to navogate from one view to other and pass the data between the views. Which view to be called next from current view - the flow of views is descriebd here using Plugs.
Controller
Controllers are the active parts of a Web Dynpro application. They define how the user can
interact with the Web Dynpro application. The data that a controller can access is defined in
the corresponding context. Different instances of controllers and contexts exist within a Web
Dynpro application.
View Controller
Each view has exactly one view controller, which processes the actions performed by the user in the view.
A view also has exactly one view context, which contains the data required for the view.
Interface Controller
Each Web Dynpro component contains exactly one component controller. This controller is a
global controller that is visible also outside the component. It is thus part of the interface of a
Web Dynpro component.
Context
Definition
The data used in the component or in the view are stored in the context. Read-write access to
this data is available using the controllers as a starting point.
Structure
The data from the contexts is managed in a hierarchical structure. Each context has a root
node, underneath which the individual data fields (attributes) are stored in a tree structure.
You create this tree structure according to the structure of your application.
CONTEXT is generally called as a ROOT Node.
Each context has nodes and attributes also.
Cardinatlity
Each node contains data fields that represent one of the following:
u2022
An individual instance of an object type
u2022
A table of instances.
This property of a node is known as its cardinality. The following table summarizes the
possible cardinalities for a node:
Cardinality Description
1:1 The node contains only one element instance, which is instantiated automatically.
0:1 The node contains only one element instance, which must not be instantiated.
1:n The node can contain multiple element instances, of which at least one must always be
instantiated (and is instantiated automatically).
0:n The node can contain multiple element instances, of which none have to be instantiated.
Further information about this and other properties of context nodes is available in the section
Context-Nodes: Properties.
Recursion Nodes
Dynamic node nesting is possible within a context, creating what is called a recursion node.
The node that is used for recursion is always a predecessor of the new node. The newly
created recursion node is a reference to a predecessor node and therefore cannot be
processed separately. Instead it takes on the structure of the node to be repeated.
Data Binding and Mapping
Within the Web Dynpro architecture, the contexts of the different controllers can be linked in
different ways:
u2022
A UI element of the user interface of the view can be linked with an element of the view
context.
u2022
A mapping can be defined between two global controller contexts, or from a view
context to a global controller context.
The context of a global controller can be linked to a Web Dynpro Model.
Defining Mapping Between Two Contexts
The elements of a view context can be locally defined. In this case (represented in the graphic
below as a "Local Node"), all the contained attributes are only visible within the relevant view.
When the view disappears, the attribute values are deleted.
Event
The component controller allows you to create events.
Events are used to communicate between controllers and enable one controller to trigger
event handlers in a different controller.
Cross-component communication can be implemented using the interface controlleru2019s events.
Events that were created in the component controller are visible within the component only.
Inbound Plugs
Inbound plugs in a view also react like an event. Therefore, when a view is called using an
inbound plug, the event handler that is optionally available for the inbound plug is always
called first. In this case event handling takes place within the current view controller.
UI Element Events
Some UI elements, such as the Button element have special events that are linked with user
actions. These events are predefined and have to be linked with an action at design time.
Actions for UI Element Events
Some UI elements such as the button element can react to a useru2019s interaction: clicking on
the corresponding pushbutton can trigger a handling method to be called within the view
controller. Such UI elements are equipped with one or several general events, which can be
linked with a specific action at design time (switching to a subsequent view, for example). If
such an action is created, an event handler method for this action is created automatically. In
this way, you can equip a UI element event (which has been inserted several times into a
view) with different actions as necessary. The event is then processed by the corresponding
event handler depending on the action that is linked.
Interfaces of Web Dynpro Components
Each component has an interface in order to enable communication between Web Dynpro
components and to enable a component to be called up by a user. This interface consists of
two parts:
Interface View of a Window Contained in a Component
The interface view of a Web Dynpro window is used to link a window with a Web Dynpro
application that can be called by the user.
Reward if helpful.
Best Wishes,
Chandralekha

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Web Dynpro dropdown doesn't work for Adobe Reader 8

Hi All,
I've developed a Web Dynpro project which uses Interactive form.
The form has a dropdown (simple type from WDJ).
The dropdown works for Adobe Reader 7 but doesn't work for Adobe Reader 8 (when I press the arrow to open the list nothing happens).
Do I need to config/install something for supporting Adobe Reader 8?
I'm using J2EE 7.13.
Thanks,
Omri

Dear Omri,
Make sure that you are using Adobe Reader 8.1.1.
Thanks and Regards,
Anto.

Unable to Enter Visual Admin for change of licence key

Hi all,
I have installed webdynpro on a stand alone system. As my linence expiry 15 days. I need to update it . But i am unable to entry the visual admin of webdynpro to enter the new license , as it stops at 99%. then in the back ground DOS prompt throwing exceptions like
Exception in Thread "Thread-3" java.lang.NullPointerException at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.connectionAction< LoginTask.java:191>
com.sap.engine.services.adminadapter.gui.tasks.LoginTask.run<LoginTask.java:191>
at java.Lang.Thread.run<Unknown Source>
Regards,
karthik

Hi karthik,
Activate SAP* super user, apply license, deactivate SAP* user.
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
Best regards, Maksim Rashchynski.

Why Firefox not supported by Web Dynpro , Pls provide the support for this .

Unable to use some of my office web application as they works on Web Dynpro! which is till now not supported by firefox.

Can you give a link?
Or see if upgrading to Firefox 24 (released sometime today) helps
* [[Update Firefox to the latest version]]

Web dynpro sld / jco setup

hi,
i have an erp system installed. on my local computer i installed the netweaver developer studio. i build the flights example from sap. after building and running the application an error occures:
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:467)
    at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:233)
    at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:218)
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:129)
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150)
so, i want to configure the jco. but on the page where i can do it, it says that my sld could not be open. in the visual administrator i set the http settings. and i tried to open the sld in browser, but it says that i have no authority for this.
but i logged in with the j2ee admin, which i gave the sap_sld_administrator rights too.
do you know what went wrong?

Hi Marcus,
If you are using UID/PWD mapping for JCO destination please check wether you have provided correct uname and password.
If you are using SSO instead of UID/PWD mapping then check wether SSO is working properly between portal and ECC.
Mostly this problem is due to authorization failures during the logon phase.
Please check if the SAP user-id & password you are using to connect to the SAP system are correct.
Get the logon data from the JAVA application or JCo trace
for the error description visit,
http://help.sap.com/saphelp_nw04/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Have a look at the solution provided in the below threads :
1>Re: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Incomplete log
2>JCO Error
Hope this helps you.
Regards,
Saleem Mohammad.

JCO , Web Dynpro & SLD connection

Hi
Can anyone please let us know why do we need JCO, WebDynpro and SLD configuration. I trying to configuring EP/BI and EP/ERP (MSS/ESS) using SAP configuration guide but not sure what they are used for.
is JCO/SLD/Web Dypro is the requirement for EP/BI & EP/ERP configuration.
Thank you everybody

Hi
The SAP Java Connector (SAP JCo) allows a Java application to communicate with any SAP System.
It provides the bridge to fetch data across stacks and from different r/3 destinations.
check the following Link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/eedf3d0eb8af5ee10000000a114084/content.htm
/message/1648513#1648513 [original link is broken] ...
Check out the following.
what is sld:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/01ea90ab24235de10000000a1553f7/frameset.htm
configuring SLD:
/message/1648513#1648513 [original link is broken]
themes:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2f/0f9e4a815bf449bf35537b2ea0aae3/frameset.htm
creation of themes:
EP Themes
All the Best
Priyanka
Do reward the points

U0093New User Storeu0094 (Visual Admin) for managing users in application DB?

We are porting a java web application to WAS. The custom login module of the application uses its own DB to lookup usernames and passwords etc.
a) Do we have to duplicate all of the user information into the UME User Store?
b) As an alternative, can we create a New User Store which would use the applications DB?
c) What are the implications apart from creating a UserContextSpi and GroupContextSpi implementations? For example, should the New User Store be the ONLY active User Store?
d) Does this mean that the SAP users like Administrator etc. should be added to the applications DB?
TIA

Hi all,
Check the bootstrap logs and .out and .boo files in work dir.
Try to restart the Java and observe carefully at what stage the java is failing like during sync of database or boostrap or during the starting the j2ee.
Check the properites files of the stage where it's failing check whether config tool have the correct information regarding j2ee_admin in securestore.
Check whether j2ee_admin user is not locked and SAPJSF user should be fine.
Check the SMICM and j2ee ports .
Thanks,
Subhash.G

Web Dynpro ALV disable column sort for specific column

Hi,
I have the above mentioned problem. The Coding I use is:
DATA: lr_field_settings TYPE REF TO if_salv_wd_field_settings,
lt_fields TYPE SALV_WD_T_FIELD_REF.
FIELD-SYMBOLS: <fs_field> LIKE LINE OF lt_fields.
lr_field_settings ?= lr_config.
lt_fields = lr_field_settings->get_fields( ).
READ TABLE lt_fields ASSIGNING <fs_field> WITH KEY fieldname = 'ANSPRECH_DETAILS'.
IF sy-subrc EQ 0.
<fs_field>-r_field->if_salv_wd_sort~set_sort_allowed( abap_false ).
<fs_field>-r_field->if_salv_wd_sort~set_grouping_allowed( abap_false ).
ENDIF.
When debugging I can see that the object attributes for sort_allowed and grouping_allowed are changed from 'X' to ' '
but the running application still allows sorting and grouping for the column 'ANSPRECH_DETAILS'.
So what did I forget or what is my mistake ????
Thx for your help.
Dino Dini

I got the similar requirement and I tried to do the below way.. it worked for me..
DATA: lr_field_settings TYPE REF TO if_salv_wd_field_settings.
DATA: lr_field TYPE REF TO cl_salv_wd_field.
lr_field_settings ?= lr_table.
lr_field = lr_field_settings->get_field( 'MATNR' ).
lr_field->IF_SALV_WD_SORT~SET_SORT_ALLOWED( abap_false
you can observe in the below image that sort option is not enabled for MATNR in the ALV.

Web Dynpro context field limitation for the form

Hello,
I have created a Web Dynpro with the context fields for Adobe form data from a structure (about 51 fields). When the form is created with reference to the context, the context is not transferred to the Adobe form.
Similarly created another Web Dynpro context with only 2 fields from the structure for Adobe data, in such case the context fields are transferred to the Adobe form.
Any limitation on the number of fields to be transferred from Web Dynpro Context to the Adobe form?
NOTE: Using ABAP Web Dynpro.
Thanks,
Anjali
Message was edited by: Anjali Joglekar

Hello,
I think I found the issue. The structure I was using had many fields with data type declared has STRING (with no definite length), in such cases the context is not copied over to the form.
After modifying the structure fields, with appropriate length data elements, the same structure fields are carried over from Web Dynpro Context to the form.
Any idea why such limitation is there for the structure field length?
Thanks,
Anjali

How to browse for a folder with ABAP WEB DYNPRO

Hi,
I want to browse for a folder in my local file system with ABAP
WEB DYNPRO. I am looking for a functionality which the function module
TMP_GUI_BROWSE_FOR_FOLDER gives.
Regards,
Vinay

HI Karl
Good evening, I am Maruti from London. I would like to paractise ABAP WebDynpro.I am not sure which Vesrion of SAP R/3 supports for ABAP WebDynpro applications. Can you please suggest me .
Thank you
Maruti
[email protected]

Web Dynpro SLD - No Visual Admin for CE 7.1

Similar Messages

Maybe you are looking for