WEB ENABLING IN BW

Hi BW Gurus,
According to following link i have done settings.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
SE37>RSBB_URL_PREFIX_GET>Execute-->execute
I am not getting the following parameters on the screen
these are
E_URL_PREFIX
E_URL_PATH
E_URL_PROTOCOL
E_URL_SERVER
E_URL_PORT
Which are mentioned in the step 3 in the red rectangle
HOW TO SET THESE THINGS using functional module
RSBB_URL_PREFIX_GET or any other way to set these
any idea. the document says don't move forword if u do not get these parameters. how to set these things????
i will award point to the solution.
Regards
Srini---

Hi Srinivas,
In the Document it says, when the paramters are not displayed correctly:
Perform the following check (in order!) to
configure the correct fully qualified host
name. Retest after each change with the
above function module.
Note: BW will have to be stopped &
restarted after applying any changes
identified below:
1. Check your DNS entry
2. Check your hosts file
(e.g. /etc/hosts file)
3. Consult SAP note 434918 for more
options (and potentially use the parameter
icm/host_name_full)
4. If you plan to use addition security
hardware/software options like reverse
proxies please consult SAP note 561885
The following are basic questions....
Is your E_SUBRC = 0?
Is your ICM running? Transaction SMICM, make sure is running. To set it up to start by default, modify instance profile rdisp/start_icman = 'true'
Have you turn on the Web Services? Transaction SICF, make sure your services under "bw" and "bc" are running.
Best regards,
Frank

Similar Messages

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

How do I make my HP Deskjet 6980 printer Web Enabled?

I cannot figure out how to make my printer web enabled so that I can use ePrint.

According to this, it can.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N29...
It's no big deal really. Just trying to figure out the email so I can print from my phone when I'm not at home.

Web Enabling SAP R/3 Transactions in the Portal

Hi,
Our requirement is to web enable SAP R/3 (>4.6) transactions in the portal (EP 6.0). We don't want to check for user authorization in the portal as all these things are done in the R/3 system. We just want to have an iView in the portal which will show all the transactions user is authorized for (in the R/3 system). I think it will be something similar to when the user logs into the R/3 system using SAP GUI.
Just to make it more clear, I am not looking for web enabling of a single R/3 transaction. I am looking for the web enabling of R/3 system as a whole in the portal.
Can anyone please tell the steps to do the same?
Please let me know for any clarifications.
Regards,
Chandra

Hi ,
Well first of all, nthis kind of interface is not suggested. But still if you need this kind of interface.
then you need to have a seperate installation of ITS server. You need to define a SAP transaction based Iview.
In property you can call any normal transaction, which gererally every user will have access to.
Now attach this iview to any existing iview or create a new iview in Portal Content.
Add the concerned page to a role/create a workset and add this page to it. and workset to concerned user role.
this will take care of your requirement.
if you need exact steps please let me knoe.

Web based or web enabled

Hi,
Lot of our clients are requesting us to give them information regarding if we are web-based or web-enabled. My question is
1. If I am using oracle forms/reports/discoverer 10g and running it over the web with Oracle application server is that web-based or web-enabled
2. What is the difference between web-based and web-enabled
3. Is speed a factor?
Thanks
Munish

Hi,
I don't see a real diference. Web enabled would be appropriate to Forms and Reports 6i that could run on client-server and web.
Now that they are all web only, the distinction is gone and they are web based (if not you will continue calling everything "web enabled" that isn't built with J2EE, PHP etc.)
Frank

Window size of web-enabled SAP transaction in an iView

I have a problem which maybe a bug concerning a web-enabled SAP transaction within a Portal iView. If the transaction is an ABAP report or a Dynpro program that requires a wide display area, the display is cut-off which requires to user to use the scroll bars. However, if manually entering the SAP transaction within the tCode input-field of the web-enabled transaction inside the iView, the window length changes and thereby the scroll bar disappears.
I would like to know how to set the inital width of the web-enabled iView so that there are no scroll bars when the iView opens an SAP transaction which requires a wide display area. I've tried both the Wizards for creating iViews for R/3 and SAP transactions without success.

Hi,
You have to set the iview property to FULL-PAGE and height to be some 8000 in the portal then the problem solves.
Regards,
Lakshmi.

Web enabling for V6 not working

I'm trying to follow the instructions for web enabling a system, produced using Headstart & Designer V6. When I try to convert the object library, entering 'form2lib.exe -i webmol50.fmb -o qmsolb50.olb APPEND', I'm getting the following error:
'form2lib.exe - Unable to locate DLL. The dynamic link library f50d2f32.dll could not be found in the specified path'.
Presumably this is because webmol50.fmb was produced using Developer V5; I loaded the form using Forms Builder V6, but no conversion took place. What do I need to do to get around this problem?

There is a new version of the Form 2 Lib utility for use with Forms 6.0.
fm2lib60.exe
The rest of the command is the same.
Regards,
Lauri

Web-Enabled SAPconsole error...

Hi,
=>Web-Enabled SAPConsole installation Guide - SAP GUI 6.40
When i start WebSAPCONSOLE via the URL http://localhost/webconsole/run (step 17 in the guide) , i have the following error display in the dispatcher:
-Element 4001 disconnected.
[ClusterManager]: ID000475: Error while creating channel. Cluster id: 4001 not found.
and in the same time the server console is closed...
I didn't have error or warning during the step 1-16...
Could somebody it help me ??
(For the moment my IIS is off.)
Thanks,
Ludo.

Hi Ludo,
I am having the same exact problem with SAP J2EE engine. How did you solve this problem.
Thanks,
Pratap

Problem in web enabling ALV ABAP report via ITS. Please help!

Hi Experts,
I have a report that has a selection screen. On executing the selection screen an ALV output loads displaying data based on the selection criteria.
I have web enabled it via ITS. I have used SICF transaction.
When I run the internet service I can see only the selection screen. There is no execute button also. I also see a different layout then if my report has only selection screen. If my report has only selection screen then my page shows all the buttons including execute.
How to resolve this problem? Please help!
Thanks
Gopal

since you mentioned about SICF, i assume you are using integrated ITS.
<i>When I run the internet service I can see only the selection screen. There is no execute button also</i>
you wont see the execute icon, instead you will see a button with "execute" text. (you can also use F8 key)
<i>I also see a different layout then if my report has only selection screen. If my report has only selection screen then my page shows all the buttons including execute.</i>
the layout of SAPGUI for HTML is slightly different, if you want (somewhat) similar look of a wingui, either make your transaction as "Easy Web Transaction" or in the url pass ~webtransactiontype=EWT
as a test can you run the following url and see how it looks.
http://waserverhost.domain.com:port/sap/bc/gui/sap/its/webgui?sap-client=<clinetno>&~transaction=<you reports transaction code>
Regards
Raja

Is Forms10g web based or web enabled ?

Hello every body.
I want to know if Oracle Forms10g is web based or web enabled ?
BTW: what is the difference between both terms ?
Yours

Web enabled means the application is available through web as well as a desktop sw.
Ex: Forms 6i. It can both as a desktop client (i.e, requires some sort of installation / setup in the client machine ). It can also be deployed on the web as well.
Web Based means: It is completely available only through a browser and not available in other ways.
10gs is Web Based.
I hope it helps.

Options for Web Enabling Oracle?

Hi,
I am wanting information on the different ways in which to web front end an Oracle DB. We have plenty of PL/SQL and Forms experience in a Client Server architecture but are wanting to write an application with a web front end. Apart from web enabling forms, which we have ruled out what options are available to us.
We have been looking at possibly using JSP but are not sure whether the project will take the learning curve this will incur. I seem to remember there being a PL/SQL cartridge for generating HTML.
Any help at all greatly appreciated.
Roy

yes, mod_plsql for Apache (the core of Oracle 9iAS) allows you to make PL/SQL calls from a browser environment and return HTML. the entire Oracle Portal product is written using this mechanism.
learning JSP from scratch, and learning how to manage security, database connections and record sets would be a daunting task. if you want to learn Java, great. it's my favority web language. however, if you have PL/SQL experience and a need to get information to the web, use mod_plsql and generate dynamic content via PL/SQL and the database.
good luck,
rich

How to Web Enabling the Forms 6i application

Hi,
We are planning to Web enabling the Complete Forms 6i and Reports 6i Application.
Please Advice me with full details how to do this
Thanks
Dorababu K

Dorabatu,
You can find a lot of doc on OTN
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
Francois

WEB ENABLING OF R/3 TRANSACTIONS IN PORTAL

Hi,
I was going through different forums on SDN regarding this subject and at lot of places, it is said that ITS takes care of conversion of R/3 screens to html screens. So even if it is a custom transaction, developer doesn't need to worry for web enabling a transaction in the portal.
Now I have two questions regarding this
1. How to web enable a standard transaction?
1. Is web enabling for a standard transaction and custom transaction done in the same way? If not, how is it done for custom transactions.
2. If web enabling (conversion from sap gui to html) is taken care by ITS itself, what is the need of importing business packages on the portal side.
Any response to this is highly appreciated.
Please let me know for any clarifications.
Regards,
Chandra

> 1. How to web enable a standard transaction?
You need to have your SMICM and SICF settings in place and running.
> 1. Is web enabling for a standard transaction and
> custom transaction done in the same way? If not, how
> is it done for custom transactions.
In ITS you need to develop and publish an Internet service which is roughly an equivalent to r/3 transaction.
> 2. If web enabling (conversion from sap gui to html)
> is taken care by ITS itself, what is the need of
> importing business packages on the portal side.
I'm not entirely familiar with the SAP portal solution, but once the service is published through ITS it is accessible through any browser, so any portal not just from SAP should be able to display it.
One big benefit of having 640 over earlier versions is to have one sap instance serve the web pages to your browser.
The actual human interface of "web-enabled" transactions is very similar to standard sapgui, so it looks like the old transaction, but is often slower and more clunky.

OAS Custom Help For Web-Enabled Forms

Anyone had experience implementing a customized help system into Web-Enabled Forms running on OAS. Regular Oracle Forms can display a help system using a specialized Oracle Form D2KHMain.fmx or using WinHelp with the library D2KWhelp.pll. Will either of these work when running the Forms on the Oracle Application Server? Java Help has been suggested? Any documentation would be helpful? Thanks.

do the following:
1. write a java program that read from the registry. you will use the program as a javabean later on.
2. compile the source and create a class/jar
3. sign it (goto sun site for details on signing class/jars). you must sign the java program or it will not be able to have access to the registry. make sure you do all the steps by following sun's instructions.
4. put it on your web server and modify the html file you use to start your developer application to include your class/jar.
5. oracle has some demos on attaching javabeans to forms. use them to help you.
6. use the program you wrote in step 1 as a javabean in your forms.
Yossi

Bidirectional NLS support in web-enabled forms.

Is it possible to have bidirectional NLS support in web-enabled forms? That is, can a local user make any settings changes on their workstation that will make (e.g.) Hebrew right-justified for text fields? If this all depends on the environment varible NLS_LANG, then it is set on the AS server and not user-changeable. I know you can change direction programmatically, but it seems odd that it doesn't work automatically. P.S. We are running forms 6i with Application Server 6i on an 8i database. Thanks in advance.

Frank,
I am using calendar.pll sent to me by my friend. I will search on OTN if this utility is avaiable on it. If it is there also, then I will download it and test it again.
Thanks,
Kiran.
Vadivelan,
I am sending simple form and calendar.pll to your mail address. But, remember this works only in windows environment so far. I am finding the solution for Linux/Web.
Kiran.

Web Enabled forms

Hi
How can I web enable a form. I know nothing about HTML

Sorry if this sounds harsh but your description of how this works, is totally and utterly incorrect.
If you you work for Oracle (as your strapline indicates) and you wish to discuss this, then mail me offline.
You wrote..
"Forms server creates Java applets (no html code) from your *.fmx files ( now stored on the Application server) which are capable of painting the screen inside a browser which will look just like your client /server Forms apps. When a transaction is processed on the client Forms Server process the transaction on the Application server - not on your client PC."
-- Forms server creates Java applets
No it does not. Forms server spawns a process per user, that process loads the FMX and uses meta-data name/value pairs to pass instructions to the java client. The Java client paints the screen based on these meta-data instructions. We do not (and never will) dynamically create java applets.
-- When a transaction is processed on the client Forms Server process the transaction on the Application server - not on your client PC.
No it does not. The java client is completely and utterly unaware of any application level logic in the application. The java client merely indicates that something occurred (either you clicked or typed) the processing of this event including any logic, data retrieval and messaging is handled on the middle tier by the forms server.
Jason Pepper
Snr Product Manager
Oracle Enterprise Internet Tools
null

WEB ENABLING IN BW

Similar Messages

Maybe you are looking for