Web Gallery, previous/ next not working consistently

First time I've seen this: next and previously are not working good. Some work in the gallery, some don't.
Reboot Firefox, some different ones work, some dont. It's worrisome. I'm sending this to people- any tips?

.Mac email can be set up two different ways on the iPhone. For "Send to Web Gallery" button to appear when clicking on the action button while viewing a photo, you must have your .Mac email set up as IMAP. This is the default setup for a .Mac email account.
If you take the time to manually set up your .Mac email as POP, then you will not have the "Send to Web Gallery" option and you will be unable to successfully email into your web gallery even if all else is set up correctly.
To check to see how you have .Mac email set up on your iPhone, go to the Home Screen, tap Settings, tap Mail, tap your .Mac account name, tap Advanced, move down on the page, and make sure you see "IMAP Path Prefix" setting (it can be blank and does not need to be changed). If the "IMAP Path Prefix" is there, then you do indeed have your .Mac email set up as IMAP on your iPhone.
If you do have it set up as a POP account, you can delete that mail account by selecting the red Delete Account button when viewing your email account as listed in Settings.
To add your .Mac email account as an IMAP account, from the Home Screen, tap Settings, tap Mail, tap Add Account..., tap .Mac, and fill out the fields with your information, tap Save and it will verify access to your .Mac email account.

Similar Messages

Web Gallery and iPhone Not Working

I'm getting the following message when attempting to use the "send to web gallery" button:
"None of your .Mac accounts have been configured for posting from mobile devices. You must first enable this feature on the .Mac website."
Others have been experiencing this as well, but I have yet to hear a solution.
I have my .mac email account associated with my iPhone and I have created a Web Gallery via .Mac using iPhoto '08.
Has anyone got this button to work successfully on their iPhone?

.Mac email can be set up two different ways on the iPhone. For "Send to Web Gallery" button to appear when clicking on the action button while viewing a photo, you must have your .Mac email set up as IMAP. This is the default setup for a .Mac email account.
If you take the time to manually set up your .Mac email as POP, then you will not have the "Send to Web Gallery" option and you will be unable to successfully email into your web gallery even if all else is set up correctly.
To check to see how you have .Mac email set up on your iPhone, go to the Home Screen, tap Settings, tap Mail, tap your .Mac account name, tap Advanced, move down on the page, and make sure you see "IMAP Path Prefix" setting (it can be blank and does not need to be changed). If the "IMAP Path Prefix" is there, then you do indeed have your .Mac email set up as IMAP on your iPhone.
If you do have it set up as a POP account, you can delete that mail account by selecting the red Delete Account button when viewing your email account as listed in Settings.
To add your .Mac email account as an IMAP account, from the Home Screen, tap Settings, tap Mail, tap Add Account..., tap .Mac, and fill out the fields with your information, tap Save and it will verify access to your .Mac email account.

Navigation Previous, Next not working

Navigation - Go to Previous Page and Go to Next Page are not working properly. It works only for page 1 and 2.
Using SAP Crystal Reports, Developer Version for Microsoft Visual Studio version 13.0.8.1216.
Crystal Reports Activex viewer has been used to display reports.
Is this issue fixed any other version
--Jagannath

After adding to Page_Init() Navigation worked fine, but I don't understand previous versions were working fine in Page_Load(), why not latest version of Crystal Reports not working.
Thank you for the answer.
--Jagannath

The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
== This happened ==
Not sure how often
== I installed firefox

Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

Wifi with stock kernel driver rtl8192ce not working consistently

Hi,
My wifi card RTL8188CE does not work consistently with kernel driver rlt8192ce. The problem that i observe is that after some time ~1hr wifi devices get disconnected and are not able to reconnect. On restarting wifi using systemctl restart hostapd sometimes the system hangs.
Here are the outputs.
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: ASUSTeK Computer Inc. Device 84b5
Kernel driver in use: rtl8192ce
Kernel modules: rtl8192ce
Logs
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: [color=red]rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)[/color]
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:56 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
Jan 22 19:30:58 Blitz-4 kernel: BUG: unable to handle kernel paging request at 000060240000801d
Jan 22 19:30:58 Blitz-4 kernel: IP: [<ffffffff811b29a6>] __kmalloc+0x86/0x1c0
Jan 22 19:30:58 Blitz-4 kernel: PGD 0
Jan 22 19:30:58 Blitz-4 kernel: Oops: 0000 [#1] PREEMPT SMP
Jan 22 19:30:58 Blitz-4 kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ctr ccm fuse bridge stp llc snd_hda_codec_hdmi arc4 mousedev hid_generic coretemp hwmon ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel rtl8192ce rtl_pci rtl8192c_common rtlwifi kvm mac80211 crct10dif_pclmul crc32_pclmul evdev crc32c_intel mac_hid uas ghash_clmulni_intel usb_storage usbhid cfg80211 hid snd_hda_codec_realtek snd_hda_codec_generic i915 aesni_intel iTCO_wdt iTCO_vendor_support aes_x86_64 lrw snd_hda_intel gf128mul drm_kms_helper rfkill snd_hda_controller glue_helper ablk_helper psmouse drm snd_hda_codec cryptd pcspkr serio_raw snd_hwdep intel_gtt snd_pcm i2c_i801 r8168(O) i2c_algo_bit i2c_core snd_timer parport_pc tpm_infineon snd fan thermal tpm_tis parport mei_me tpm soundcore battery mei video shpchp
Jan 22 19:30:58 Blitz-4 kernel: button lpc_ich processor sch_fq_codel ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jan 22 19:30:58 Blitz-4 kernel:CPU: 3 PID: 1238 Comm: Cache2 I/O Tainted: G O 3.18.2-2-ARCH #1
Please suggest any workaround/modules.

Same problem to me. lspci output:
07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
and logs:
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
A bug report submitted to redhat bugzilla https://bugzilla.redhat.com/show_bug.cg … id=1203241 suggests it may be caused by a bug in the rtl8192ce kernel module since linux 3.17.7. I hope this problem could be solved as quickly as possible.
Last edited by mike_nzk (2015-04-04 08:33:59)

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem.

Power button not working consistently

Have owned my Macbook Air 13" for almost a year. Over the last few months, I've had some issues with the power button when in standby mode. I think this happened even before I updated to OS X Yosemite. Sometimes when I go to turn my computer on, the button is completely unresponsive. I have to press the button over and over again. Sometimes I hold it down firmly and it turns on, other times it seems to turn on after a light touch. Any suggestions as to what I'm doing wrong? Thanks-

LauraTX1 wrote:
The power button on my Tungsten E2 not working consistently. What do I need to do to it? Hard to turn my palm on when the button does not work properly.
Post relates to: Tungsten E2
Just an FYI Laura - you can press any of the hard buttons on your Palm and it will turn on. Many of try to avoid using the fragile power button, choosing instead to use a hard button to turn on, and the normal timeout to turn off.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Command-C is not working consistently to.

Command-C is not working consistently for me. In multiple apps, but mostly in Word, I find myself pressing Command-C and then Command-V to paste and what I paste is the LAST thing I copied, not the most recent. I sometimes have to repeat teh sequence several times before it pastes the thing I want it to. Any suggestions? I tried searching for this problem, but didn't find any relevant discussions. Thanks!

Hello eeinna,
I was thinking it might be a good idea to reset the SMC and the PRAM on the computer. Here are the 2 articles for those processes:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
And
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
If needed I would also recommend testing the issue in a new user, and following the directions in this article as well based on what you find.
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
All the best,
Sterling

Web Cam applet is not working in great consistency

Hi... My video capturing applet is not working very well.
The image stream is displayed on the web page in JPEG format with 0.5 quality. However, it crashes after a while and the it does not release the vfw resource.
I have to restart my machine in order to execute it again.
Can anyone please help?
Thanks.
Carter

Ok. Thanks.
Sender Applet
import javax.swing.*;
import java.io.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
/*<applet code="myGUIApplet.class" width="300" height="300"></applet>*/
public class myGUIApplet extends JApplet implements ActionListener
     private JPanel bottom=new JPanel();
     private JPanel centVisual=new JPanel();
     private JPanel connectionAddress=new JPanel();
     private JButton capture=new JButton("Start Capturing");
     private JButton stops=new JButton("Stop");
     private JMenuBar menubar=new JMenuBar();
     private JMenu file=new JMenu("file");
     private JMenuItem fileItem1=new JMenuItem("Exit");
     private JLabel serverip=new JLabel("Server IP");
     private JTextField setIP=new JTextField();
     public static JTextField ServerInfo=new JTextField();
     private MyTransmitter mytrans;
     private String ip;
     public static final String DEFAULT_MULTICAST_IP="226.10.10.20";
     public static final String DEFAULT_PORT="80";
     public void init()
          //setSize(400,400);
          setLayout(new BorderLayout());
          menubar.add(file);
          file.add(fileItem1);
          bottom.setLayout(new BorderLayout());
          bottom.setBackground(Color.black);
          bottom.add("West",capture);
          bottom.add("East",stops);
          connectionAddress.setLayout(new BorderLayout());
          connectionAddress.add("North",serverip);
          connectionAddress.add("South",setIP);
          ServerInfo.setEditable(false);
          connectionAddress.add("Center",ServerInfo);
          setIP.addActionListener(this);
          setIP.setText("");
          capture.setBackground(Color.lightGray);
          capture.addActionListener(this);
          stops.addActionListener(this);
          fileItem1.addActionListener(this);
          add("South",bottom);
          add("North",menubar);
          add("Center",connectionAddress);
     public void actionPerformed(ActionEvent ae){
          Object source=ae.getSource();
          if(source==capture){
          if(setIP.getText().equals(""))
                    ip=DEFAULT_MULTICAST_IP;
          else{
               ip=setIP.getText();
               if(mytrans!=null){
                    mytrans.stopTransmitter();
                    mytrans=null;
               System.out.println(" - Connecting to "+ip+" port: "+DEFAULT_PORT);
               ServerInfo.setText(" - Connecting to "+ip+" port: "+DEFAULT_PORT);
               mytrans=new MyTransmitter(ip,DEFAULT_PORT,ServerInfo);
               mytrans.start();
          if(source==stops){
               if(mytrans!=null)
                    mytrans.stopTransmitter();
               System.exit(0);
          if(source==fileItem1){
               if(mytrans!=null)
                    mytrans.stopTransmitter();
               System.exit(0);
     public void destroy(){
          if(mytrans!=null){
               mytrans.stopTransmitter();
import java.awt.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
import java.net.InetAddress;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import javax.media.rtp.*;
import java.io.InputStream;
import javax.media.rtp.RTPManager;
public class MyTransmitter extends Thread
     private MediaLocator videoLocator;
     private String ipAddress;
     private int basePort;
     private Integer stateLock=new Integer(0);
     private boolean failure;
     private Processor processor;
     private DataSource videoDataInput,videoDataOutput;
     private RTPManager rtpMgrs[];
     private VideoFormat JPEG_VIDEO=new VideoFormat(VideoFormat.JPEG_RTP);
     private SendStream sendStream;
     private SourceDescription descriptionList[];
     private JTextField infoField;
     public MyTransmitter(String ips,String ports,JTextField ServerInfo){
          infoField=ServerInfo;
          ipAddress=ips;
          Integer bPort=Integer.valueOf(ports);
          if(bPort!=null)
               basePort=bPort.intValue();
     public void run()
          initializeVideo();
          if(videoLocator!=null){
               createMyProcessor();
               createMyManager();
          // May be should put inside the if..else statements
          //createMyTransmitter();
     // Initailize the video
     public void initializeVideo()
          // Stre the devices in a vector
          VideoFormat format=new VideoFormat(VideoFormat.RGB);
          Vector deviceList=CaptureDeviceManager.getDeviceList(format);
          CaptureDeviceInfo deviceInfo=null;
          // If there is more than one device detected
          if(deviceList.size()>0){
               // Set the first device to device Info
               // GEt the media locator of the devie
               deviceInfo=(CaptureDeviceInfo)deviceList.elementAt(0);
               videoLocator=deviceInfo.getLocator();
          }else{
               System.out.println(" --X No device found...");
               infoField.setText(" --X No device found...");
     public void createMyProcessor()
          boolean result=false;
          DataSource ds=null;
          // Check if the media locator is null
          if(videoLocator==null){
               System.out.println(" --X No video locator..");
               infoField.setText(" --X No video locator...");
          System.out.println(" - Trying to create a Processor..");
          infoField.setText(" - Trying to create a Processor..");
          // Attempt to create DataSource from media locator
          try{
               ds=Manager.createDataSource(videoLocator);
          }catch(Exception ex){
               System.out.println(" --X Unable to create dataSource : "+ex.getMessage());
          System.out.println(" - Video data source is created..");
          infoField.setText(" - Video data source is created..");
          // Try to create Processor from DataSource
          try{
               processor=Manager.createProcessor(ds);
          }catch(NoProcessorException npe){
               System.out.println(" --X Unable to create Processor: "+npe.getMessage());
               infoField.setText(" --X Unable to create Processor: "+npe.getMessage());
          catch(IOException ioe){
               System.out.println(" --X IOException creating Processor..");
               infoField.setText(" --X IOException creating Processor..");
          // Wait for the processor to be configured
          result=waitForState(processor,Processor.Configured);
          if(result==false){
               System.out.println(" --X Could not configure processor..");
               infoField.setText(" --X Could not configure processor..");
          // Set the track controls for processor
          TrackControl []tracks=processor.getTrackControls();
          if(tracks==null || tracks.length<1){
               System.err.println(" --X No track is found..");
               infoField.setText(" --X No track is found..");
          // Set the content description of processor to RAW_RTP format
          // This will limit the supported formats to reported from
          // Track.getSupportedFormats() to valid RTP format
          ContentDescriptor cdes=new ContentDescriptor(ContentDescriptor.RAW_RTP);
          processor.setContentDescriptor(cdes);
          Format []supported;
          Format chosen=null;
          boolean atLeastOneTrack=false;
          for(int i=0;i<tracks.length;i++){
               Format format=tracks.getFormat();
               if(tracks[i].isEnabled()){
                    supported=tracks[i].getSupportedFormats();
                    // WE've set the output content to RAW_RTP.
                    // So, all the supporte formats should work with RAW_RTP.
                    // We will pick the first one.
                    if(supported.length>0){
                         if(supported[0] instanceof VideoFormat){
                              chosen=checkVideoSize(tracks[i].getFormat(),supported[0]);
                         }else
                              chosen=supported[0];
                         tracks[i].setFormat(chosen);
                         System.out.println(" Track "+i+" is transmitted in "+chosen+" format.. ");
                         infoField.setText(" Track "+i+" is transmitted in "+chosen+" format.. ");
                         atLeastOneTrack=true;
                    }else{
                         // If no format is suitable, track is disabled
                         tracks[i].setEnabled(false);
               }else
                    tracks[i].setEnabled(false);
          if(!atLeastOneTrack)
               System.out.println("atLeastOneTrack: "+atLeastOneTrack);
               System.out.println(" --X Could Not find track to RTP format..");
               infoField.setText("atLeastOneTrack: "+atLeastOneTrack);
               infoField.setText(" --X Could Not find track to RTP format..");
          result=waitForState(processor,Controller.Realized);
          if(result==false){
               System.out.println(" --X Could NOT realize processor...");
               infoField.setText(" --X Could NOT realize processor...");
          // Set the JPEG Quality to value 0.5
          setJPEGQuality(processor,0.5f);
          // Set the output Data Source
          videoDataOutput=processor.getDataOutput();
          //Start the processor
          processor.start();
     public void setJPEGQuality(Processor p,float values)
          Control []cs=p.getControls();
          QualityControl qc=null;
          VideoFormat JPEGFmt=new VideoFormat(VideoFormat.JPEG);
          // Loop through the ocntrols to find the Quality control for the JPEG encoder
          for(int i=0;i<cs.length;i++){
               if(cs[i] instanceof QualityControl && cs[i] instanceof Owned){
                    Object owner=((Owned)cs[i]).getOwner();
                    // Check if the owner is the Codec
                    // Check the format of output as well
                    if(owner instanceof Codec){
                         Format fmts[]=((Codec)owner).getSupportedOutputFormats(null);
                         // Loop through the supported format and set the quality to 0.5
                         for(int j=0;j<fmts.length;j++){
                              qc=(QualityControl)cs[i];
                              qc.setQuality(values);
                              System.out.println(" - Quality is set to "+values+" on "+qc);
                              infoField.setText(" - Quality is set to "+values+" on "+qc);
                              break;
               if(qc!=null)
                    break;
     public Format checkVideoSize(Format originalFormat,Format supported)
          int width,height;
          Dimension size=((VideoFormat)originalFormat).getSize();
          Format jpegFormat=new Format(VideoFormat.JPEG_RTP);
          Format h263fmt=new Format(VideoFormat.H263_RTP);
          if(supported.matches(jpegFormat)){
               width=(size.width%8 == 0 ? size.width:(int)(size.width%8)*8);
               height=(size.height%8 == 0 ? size.height:(int)(size.height%8)*8);
          }else if(supported.matches(h263fmt)){
               if(size.width<128){
                    width=128;
                    height=96;
               }else if(size.width<176){
                    width=176;
                    height=144;
               }else{
                    width=352;
                    height=288;
          }else{
               // Unknown format, just return it.
               return supported;
          return (new VideoFormat(null,new Dimension(width,height),Format.NOT_SPECIFIED,null,Format.NOT_SPECIFIED)).intersects(supported);
     public boolean waitForState(Processor p,Integer status)
          p.addControllerListener(new StateListener());
          failure=false;
          if(status==Processor.Configured){
               p.configure();
          }else if(status==Processor.Realized){
               p.realize();
          //Wait until an event that confirms the success of the method, or failure of an event
          while(p.getState()<status && !failure){
               synchronized(getStateLock()){
                    try{
                         // Wait
                         getStateLock().wait();
                    }catch(InterruptedException ie){
                         return false;
          if(failure)
               return false;
          else
               return true;
     public Integer getStateLock(){
          return stateLock;
     public void setFailure(){
          failure=true;
     public void createMyManager()
          SessionAddress destAddress;
          InetAddress ipAddr;
          int port;
          SourceDescription srcDesList[];
          PushBufferDataSource pbds=(PushBufferDataSource)videoDataOutput;
          PushBufferStream pbss[]=pbds.getStreams();
          rtpMgrs=new RTPManager[pbss.length];
          for(int a=0;a<pbss.length;a++){
          try{
               // RTP Managers or RTP Manager?????
               rtpMgrs[a]=RTPManager.newInstance();
               port=basePort;
               ipAddr=InetAddress.getByName(ipAddress);
               SessionAddress localAddr=new SessionAddress(InetAddress.getLocalHost(),port+20);
               destAddress=new SessionAddress(ipAddr,port,1);
               Integer myipprefix=Integer.valueOf(ipAddress.substring(0,3));
               if((myipprefix.intValue()>223) && (myipprefix.intValue()<240)){
                    rtpMgrs[a].initialize(destAddress);
               }else{
                    rtpMgrs[a].initialize(localAddr);
               rtpMgrs[a].addTarget(destAddress);
               System.out.println(" Created RTP session: "+ipAddress+" "+port+" to "+destAddress);
               infoField.setText(" Created RTP session: "+ipAddress+" "+port+" to "+destAddress);
               if(videoDataOutput!=null){
                    sendStream=rtpMgrs[a].createSendStream(videoDataOutput,0);
                    sendStream.start();
                    System.out.println(" RTP stream is started..");
                    infoField.setText(" RTP stream is started..");
          }catch(UnsupportedFormatException ex){
               System.out.println(" --X Unsupported Format : "+ex);
               infoField.setText(" --X Unsupported Format : "+ex);
          catch(IOException ioe){
               System.out.println(" --X IOException : "+ioe.getMessage());
               infoField.setText(" --X IOException : "+ioe.getMessage());
          catch(Exception ex){
               System.out.println(" --X Unable to create RTP Manager...");
               System.out.println(ex.getMessage());
               infoField.setText(" --X Unable to create RTP Manager..."+ex.getMessage());
     /*public void createMyTransmitter()
     try{
          if(videoDataOutput!=null){
               sendStream=rtpMgrs[i].createSendStream(videoDataOutput,0);
               sendStream.start();
     }catch(UnsupportedFormatException ex){
               System.out.println(" --X Unsupported Format : "+ex);
               infoField.setText(" --X Unsupported Format : "+ex);
     catch(IOException ioe){
               System.out.println(" --X IOException : "+ioe.getMessage());
               infoField.setText(" --X IOException : "+ioe.getMessage());
     public void stopTransmitter(){
          if(processor!=null){
               processor.stop();
               processor.close();
               processor=null;
               // Loop through RTP Managers and close all managers..
               // Dispose them for garbage collection
               for(int i=0;i<rtpMgrs.length;i++){
                    rtpmgrs[i].removeSendStream(this);
                    rtpMgrs[i].removeTargets("Session ended..");
                    rtpMgrs[i].dispose();
               //rtpMgrs.removeTargets("Session ended..");
               //rtpMgrs.dispose();
     * StateListener class to handle Controller events
     class StateListener implements ControllerListener{
          public void controllerUpdate(ControllerEvent ce){
               if(ce instanceof ControllerClosedEvent){
                    processor.close();
               /* Handle all controller events and notify all
               waiting thread in waitForState method */
               if(ce instanceof ControllerEvent){
                    synchronized(getStateLock()){
                         getStateLock().notifyAll();
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Client Applet
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.control.BufferControl;
import javax.media.control.*;
import javax.media.format.*;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import javax.media.rtp.event.*;
import com.sun.media.rtp.RTPSessionMgr;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.io.*;
import java.net.*;
import java.net.URL;
import java.net.Socket;
/*<applet code="clientPlayerApplet.class" width="400" height="300">
     <param name=ServerIPS value="192.168.0.9">
     <param name=ServerPort value="80">
     <param name=TimeToLive value="1">
     <param name=archive value="clientPlayerApplet.jar">
</applet> */
public class clientPlayerApplet extends JApplet implements ControllerListener, ReceiveStreamListener,SessionListener
     String sessions[]=null;
     RTPManager rtpmgrs[]=null;
     boolean dataReceived=false;
     Object myDataSync=new Object();
     private Player player;
     //private String serveripadd="226.10.10.20";
     //private int serverPort=2020;
     //private int timeToLive=1;
     private JPanel panel;
     private Vector currentParticipant;
     public void init()
          panel=new JPanel();
          setLayout(new BorderLayout());
          add("Center",panel);
          //String[] urls;
          /*urls[0]=getParameter("ServerIPS");
          urls[1]="/";
          urls[2]=getParameter("ServerPort");*/
          String []urls={new String(getParameter("ServerIPS")+"/"+getParameter("ServerPort")+"/"+getParameter("TimeToLive"))};
          sessions=urls;
          initializePlayer();
     public void initializePlayer(){
          try{
               InetAddress ipAddr;
               SessionAddress localAddr=new SessionAddress();
               SessionAddress destAddr;
               rtpmgrs=new RTPManager[sessions.length];
               currentParticipant=new Vector();
               //rtpmgrs=new RTPManager();
               SessionLabel session=null;
               //Open RTP session
               for(int i=0;i<sessions.length;i++){
                    try{
                         session=new SessionLabel(sessions[i]);
                         //session=new SessionLabel(sessions);
                    }catch(IllegalArgumentException iae){
                         System.out.println(" --X Unable to parse the sesion address given");
                    System.out.println(" - Open RTP session for "+session.port);
                    rtpmgrs[i]=(RTPManager) RTPManager.newInstance();
                    rtpmgrs[i].addSessionListener(this);
                    rtpmgrs[i].addReceiveStreamListener(this);
                    ipAddr=InetAddress.getByName(session.addr);
                    if(ipAddr.isMulticastAddress()){
                         localAddr=new SessionAddress(ipAddr,session.port,session.ttl);
                         destAddr=new SessionAddress(ipAddr,session.port,session.ttl);
                    }else{
                         localAddr=new SessionAddress(InetAddress.getLocalHost(),session.port);
                         destAddr=new SessionAddress(ipAddr,session.port);
                    rtpmgrs[i].initialize(localAddr);
                    BufferControl bc=(BufferControl)rtpmgrs[i].getControl("javax.media.control.BufferControl");
                    if(bc!=null)
                         bc.setBufferLength(600);
                    rtpmgrs[i].addTarget(destAddr);
          }catch(Exception ex){
               System.out.println(" --X Cannot create RTP Session "+ex.getMessage());
          long currentTime=System.currentTimeMillis();
          long waitingDuration=10000;
          try{
               synchronized(myDataSync){
                    while(!dataReceived && (System.currentTimeMillis() - currentTime < waitingDuration)){
                         if(!dataReceived){
                              myDataSync.wait(1000);
          }catch(Exception ex){
               System.out.println(" --X myDataSync interrupted...");
          if(!dataReceived){
               System.out.println(" No RTP Stream Data is received.." );
     public void destroy()
          for(int i=0;i<currentParticipant.size();i++){
               //if(player!=null)
                    ((MyPlayList)currentParticipant.elementAt(i)).close();
          // Loop through the RTP Managers
          // -> Remove the stream listener
          // -> Remove the target address
          // -> Dispose the RTP Manager for garbage collection
          currentParticipant.removeAllElements();
          for(int i=0;i<rtpmgrs.length;i++){
               if(rtpmgrs[i]!=null){
                    rtpmgrs[i].removeReceiveStreamListener(this);
                    rtpmgrs[i].removeTargets(" Closing session..");
                    rtpmgrs[i].dispose();
                    rtpmgrs[i]=null;
     MyPlayList find(Player pl){
          for(int i=0;i<currentParticipant.size();i++){
               MyPlayList mpl=(MyPlayList)currentParticipant.elementAt(i);
               if(mpl.clientPlay==pl)
                    return mpl;
          return null;
     MyPlayList find(ReceiveStream rs){
          for(int i=0;i<currentParticipant.size();i++){
               MyPlayList mpl=(MyPlayList)currentParticipant.elementAt(i);
               if(mpl.stream==rs)
                    return mpl;
          return null;
     *     ReceiveStream Listener function                    *
     public synchronized void update(ReceiveStreamEvent rse)
          RTPManager mgr=(RTPManager)rse.getSource();
          ReceiveStream stream=rse.getReceiveStream();
          Participant participant=rse.getParticipant();
          if(rse instanceof RemotePayloadChangeEvent){
               System.out.println(" -- Received Payload Change Event..");
               System.out.println(" Sorry, no payload change is allowed.");
          }else if(rse instanceof NewReceiveStreamEvent){
               try{
                    // Once the new stream is detected, create the datasource
                    stream=((NewReceiveStreamEvent)rse).getReceiveStream();
                    DataSource outputDS=stream.getDataSource();
                    // Get RTP Controller to find the format
                    RTPControl rtpctl=(RTPControl)outputDS.getControl("javax.media.rtp.RTPControl");
                    if(rtpctl!=null){
                         System.out.println(" -> Received new rtP stream: "+rtpctl.getFormat());
                    }else
                         System.out.println(" -> Received new RTP stream");
                    if(participant!=null){
                         System.out.println(" -> New stream received from: "+participant.getCNAME());
                    }else{
                         System.out.println(" -> New stream detected... ");
                    player=Manager.createPlayer(outputDS);
                    if(player==null)
                         return;
                    System.out.println(" - Player is created...");
                    player.addControllerListener(this);
                    player.realize();
                    // Helper class to identify the player and stream
                    MyPlayList mpl=new MyPlayList(player,stream);
                    // Add the helper class object to Vector
                    currentParticipant.addElement(mpl);
                    // Notify initializePlayer() that a new stream has arrived
                    synchronized(myDataSync){
                         dataReceived=true;
                         myDataSync.notifyAll();
               }catch(Exception ex){
                    System.out.println(" --X NewReceiveStream Exception: "+ex.getMessage());
                    return;
          }else if(rse instanceof ByeEvent){
               System.out.println(" - BYE packet received from "+participant.getCNAME());
               MyPlayList mpls=find(stream);
               if(player!=mpls){
                    mpls.close();
                    currentParticipant.removeElement(mpls);
               if(mgr!=null){
                    mgr.removeReceiveStreamListener(this);
                    mgr.removeTargets(" Closing session..");
                    mgr.dispose();
                    mgr=null;
          }else if(rse instanceof StreamMappedEvent){
               if(stream!=null && stream.getDataSource()!=null){
                    DataSource myds=stream.getDataSource();
                    RTPControl rtpctrl=(RTPControl)myds.getControl("javax.media.rtp.RTPControl");
                    System.out.println(" -> The previously unidentified stream ");
                    if(rtpctrl!=null)
                         System.out.println(" "+rtpctrl.getFormat());
                    System.out.println(" has been identified as sent by :"+participant.getCNAME());
     *           Session Listener
     public void update(SessionEvent sesevt)
          if(sesevt instanceof NewParticipantEvent){
               Participant part=((NewParticipantEvent)sesevt).getParticipant();
               System.out.println(" -> A new partcipant has joined :"+part.getCNAME());
     *     ControllerListener for Players
     public synchronized void controllerUpdate(ControllerEvent ce)
          Player p=(Player)ce.getSource();
          if(p==null)
               return;
          if(ce instanceof RealizeCompleteEvent){
               MyPlayList mpls=find(p);
               if(mpls!=null){
                    p.start();
                    if(p.getVisualComponent()!=null){
                         panel.add(player.getVisualComponent());
                         panel.validate();
          if(ce instanceof ControllerErrorEvent){
               p.removeControllerListener(this);
               MyPlayList mpls=find(p);
               if(mpls!=null){
                    // Close the player
                    // Remove the player helper class object from the list
                    p.close();
                    currentParticipant.removeElement(mpls);
               System.out.println("Receiver internal error: "+ce);
     class SessionLabel{
          public String addr=null;
          public int port;
          public int ttl;
          SessionLabel(String session) throws IllegalArgumentException
               int off;
               String portStr=null;
               String ttlStr=null;
               if(session!=null && session.length() >0){
                    while(session.length()>1 && session.charAt(0)=='/')
                         session=session.substring(1);
                    off=session.indexOf('/');
                    if(off==-1){
                         if(!session.equals(""))
                              addr=session;
                    }else{
                         addr=session.substring(0,off);
                         session=session.substring(off+1);
                         off=session.indexOf('/');
                         if(off==-1){
                              if(!session.equals(""))
                                   portStr=session;
                         }else{
                              portStr=session.substring(0,off);
                              session=session.substring(off+1);
                              off=session.indexOf('/');
                              if(off==-1){
                                   if(!session.equals(""))
                                        ttlStr=session;
                              }else{
                                   ttlStr=session.substring(0,off);
               if(addr==null)
                    throw new IllegalArgumentException();
               if(portStr!=null)
                    try{
                         Integer ints=Integer.valueOf(portStr);
                         if(ints!=null)
                              port=ints.intValue();
                    }catch(Throwable t){
                         System.out.println(" --X PortStr Error..");
                         throw new IllegalArgumentException();
               }else
                    throw new IllegalArgumentException();
               if(ttlStr!=null){
               try{
                    Integer intsttl=Integer.valueOf(ttlStr);
                    if(intsttl!=null)
                         ttl=intsttl.intValue();
               }catch(Throwable t){
                         System.out.println(" --X PortStr Error..");
                         throw new IllegalArgumentException();
     class MyPlayList{
          Player clientPlay;
          ReceiveStream stream;
          MyPlayList(Player p,ReceiveStream rs){
               clientPlay=p;
               stream=rs;
          public void close()
               clientPlay.close();

Next-Previous Do not work Properly for lengthly dynamic Where Clause

I have created a View object using Expert Query mode
with following Query:
SELECT LIC_SYS_ID,
LIC_NAME,
TERRITORIES,
LANGUAGES,
MEDIA,
SEGMENT_NAME,
CHANNELS,
ACTIVITY_CD,
LS.LIC_SHORT_NAME,
LS.LIC_AKA_NAME
FROM V_LICENSEE_SEARCH LS
ORDER BY LIC_NAME
Then at run time the following Where Clause staments get added by in JSP based on the users criteria
wClause = "(ACTIVITY_CD = '" + activityStatus + "')"
+ " AND " +
"(LIC_NAME like '" + licenseeName + "%' OR " +
" LIC_SHORT_NAME like '" + licenseeName + "%' OR " +
" LIC_AKA_NAME like '" + licenseeName + "%' ) "
In this case the DataScroller does not work properly It DataTable traves only one setp when I click the "Next" link, But if I use the Drop down list of the Scroller its works fine.
Secondly the "Next" "Previous" links of the DataScroller work fine if I use only one stmt in the WhereClause ex: "ACTIVITY_CD LIKE 'A%'".
Can anybody help me with this, Is this a limitation of DataScroller/DataTable/DataSource tags why does it not work??
Please help me its urgent.
Thanks a ton !!

Thx for the reply, I did try your suggestion It did not throw any exception. Here is the log messages after enabling jbo Debug.
[391] Reusing a cached session application module instance
[392] Getting a connection for internal use...
[393] Creating internal connection...
[394] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
wClause : (ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )
[395] Column count: 10
[396] ViewObject : Reusing defined prepared Statement
[397] $$added root$$ id=-2
[398] Application Module failover is enabled
[399] Getting a connection for internal use...
[400] Creating internal connection...
[401] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[402] <AM MomVer="0">
<cd/>
<VO>
<VO Sz="8" St="8" Def="com.sophoi.ipls.media.tv.businessentities.licensee.LicenseeView" Name="licenseeView">
<Wh>
<![CDATA[(ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )]]>
</Wh>
<Or>
<![CDATA[LIC_NAME ASC]]>
</Or>
</VO>
</VO>
</AM>Long postings are being truncated to ~1 kB at this time.

Web Module: Works great, but is it possilble to publish an HTML web gallery that does not use thumbnails, but just displays all photos (one above another)?

It would be nice if a published web gallery did not require clicking or sliding in order to view a new picture. Is there a template that just puts up every image in the gallery, full-size, one above another? That's how I like my webpages - see, for example, www.sgrhoa.net/betz/150205/ .
Thanks!
Bill

The built-in templates do not do that. At a quick glance, none of the available templates from Adobe's site do that either.

Web gallery links no longer work from iWeb

I previously added links directly to my web gallery photo albums as external links in iWeb. This no longer works. For instance, I used to be able to send people to a specific web gallery album by linking to gallery.mac.com/username#xxxxxxx where xxxxxxx is the number of the album. This recently stopped working however. iWeb seems to change the # sign to %252. Anyone know what happened?
Kurt

Kurt:
FWIW here is some info I gleamed from various sites on naming sites.
Renaming a website or webpage
You can rename a site or page at any time by double-clicking its name in the site organizer and typing the new name.
The page name appears at the top of the visitor's browser.
The site name is included in the website's address (URL):
http://web.mac.com/[YourMemberName]/iWeb/[SiteName]
Renamed pages and sites (as well as the site's URL) change online the next time you publish.
IMPORTANT: If you rename a site, previously created links to your site won't work; be sure to notify your visitors, especially your blog or podcast subscribers.
Browsers convert spaces in site names to "%20." To avoid these symbols, use an underscore, hyphen, or some other character instead of a space. Also avoid non-Roman characters; many get converted to numbers when you publish.
Other characters aren't recommended for use in website names, including: forward and backward slashes (/ \), brackets ([ ]), tilde (~), exclamation point !, question mark (?), "at" sign (@), number sign (#), dollar sign ($), ampersand (&), asterisk (*), colon (:), equal sign (=), comma (,), and double quotation marks ("). Using these characters may result in names with strange numbers in them.
Hope this helps.
OT

Photo Gallery Lightbox Navigation not working

Hi,
The previous, next, and close buttons don't seem to be working for some of the photos on this page: http://vanessastone.namastecms.com/media/photos/community for the photo gallery lightbox. The issue only appears to be happening in Chrome and Safari. Firefox is working fine. I looked around in Chrome's Developer tools but didn't find any hints as to why that might be happening. Any help is greatly appreciated!
Thanks,
Jeff

Sorry InteractiveGuru, it looks like I posted on the wrong thread. The reason the buttons aren't working is because of your CSS regarding your left, right and close buttons are not suitable. You'll want to either revisit your CSS, or revisit how the buttons are formatted (e.g the three <a>'s).

Clickpad Right Click not Working Consistantly

I just purchased an HP laptop with a Clickpad and reviewed your documentation for what areas on the pad to use for clicking however I can't seem to get a consistent right click even when I click in the area indicated by the diagram. I can be almost in the bottom right corner of the pad's surface and still get a left click response.
Is there a trick to it I am missing or do I have a dud?

Hello Kyraoko,
Welcome to the HP Forums!
I understand the right-clicking action on the touchpad, of your notebook, is not working properly. It is likely a hardware issue, to be honest. However, please try the following steps before assuming anything:
1. Tap the upper-left corner of the touchpad a couple of times to turn it off, then turn it on. This is considered resetting the touchpad.
2. Performing a Hard Reset or Forced Reset is the next step. A hard reset clears driver instructions, recent configurations, etc. This forces the hardware to reread all instructions from the drivers and software stored within Windows.
3. Update the mouse/touchpad driver. These instructions will guide you along the right path:
a. Go to the HP Drivers and Downloads webpage. Enter your computer model number and then click Go .
b. Select your computer model from the list of results.
c. Select your operating system from the drop down menu and then click Next.
d. Scroll down to select the driver category "Driver - Keyboard, Mouse and Input Devices".
e. Click the Download button next to the appropriate TouchPad or ClickPad driver. The file downloads to your Downloads folder.
f. Open your Downloads folder and double-click to install the latest driver. Follow on-screen instructions to complete the installation.
Source: Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
4. If that doesn't work, we will have to try a more direct approach of reinstalling the mouse driver:
a) Go into Device Manager, then "Mice and other pointing devices".
b) Right-click on the touchpad driver, and select "Uninstall".
c) Restart the computer. This will force a new driver to be written based on the detected hardware.
5. Try connecting a USB mouse to the computer. Test it to see whether or not it is working properly.
If those steps do not help, then I would call HP phone support so they can physically address the hardware of the touchpad. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for posting, and have a great day!
Mario
I worked on behalf of HP.

Web Gallery Album image not appearing

I just posted my first album to My Gallery with posted 08, pretty cool.
I selected specific images within an Event and posted them to Web Gallery. The images posted fine however on the My Gallery Page the album has no thumbnails associated with it. Does anyone have a recommendation of how I could get them to appear?
Also, is there any way to view the images within multiple events? I want to be able to drag images from one event to another. Thanks

Also, is there any way to view the images within multiple events? I want to be able to drag images from one event to another. Thanks
Look at Dvents as the basic grouping of photos from one shoot. Mike N. (nahyun... described Events as well as I've seen in this post.
If you want to group photos based on other characteristics use Albums. One photo can be in multiple albums and still have only one file in the library.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Web Gallery, previous/ next not working consistently

Similar Messages

Maybe you are looking for