Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

Similar Messages

Mac Mail, can't move to Trash : error "227845.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

this just started popping up last weekend? Any ideas?
Mac Mail on Mtn Lion.
POP email acct
No changes to settings in Months
thanks.

if it has something to do with moving my Applications folder away from the SSD drive and to the HD drive
HI ...
Absolutely.
Apps must be stored in the Applications folder on the startup disk they were downloaded to.
It's not a permissions issue.

Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.

Hi,
While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
You wanted to add an entry to table
"\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
you declared
with a UNIQUE KEY. However, there was already an entry with the
same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
Plz guide
Regards,
Saurabh Diwakar

Hi,
take a look at this SAP note:
Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
Regards
Andreas

Subversion - a repository connection with the supplied URL already exists

Hi all!
OS: SuSe 9.3
jdeveloper:jdevstudiobase10131
I need to create three repository connection to the same URL, with different user but jdeveloper doesn't give me any chance to do it. Returning the following error:
Could Not Create Connection
A repository connection with the supplied URL already exists.
Any idea here?
Thanks
Gilberto
Message was edited by:
gilbertoca

You might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit

Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added

Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added". Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal.
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dm1k Medium Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace:    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dm1k Medium ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvt6 High    SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616 [sts3util.cxx:6988]
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvi3 High    Couldn't retrieve server
http://serverurl policy, hr = 80042616 [sts3util.cxx:1865] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvu0 High    STS3::StoreCachedError: Object initialization failed. Message: "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616 [sts3util.cxx:7083] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvg4 High    Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7
[sts3util.cxx:1591] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dv5x High    CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616 [sts3acc.cxx:1932] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dv3t High    CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616 [sts3acc.cxx:288] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvb1 Medium CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616 [sts3handler.cxx:337] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvb2 Medium CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616            [sts3handler.cxx:355] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Crawler:FilterDaemon
e4ye High    FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7" [fltrsink.cxx:566] search\native\mssdmn\fltrsink.cxx
04/22/2015 19:37:10.93 mssearch.exe (0x1118)                   0x0628 SharePoint Server Search      Crawler:Gatherer Plugin
cd11 Warning The start address http://serverurl cannot be crawled. Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content' Details: The SharePoint item being
crawled returned an error when requesting data from the web service.   (0x80042616)
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6

Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference  SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
     ditto -h | --help

Record filtered in advance as error records with the same key exist

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
Thanks for reply
I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
Thanks in advance
Raja

Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

DTP error: No Message: Filter Out New Records with the Same Key

Hello SDN,
I have looked up solutions for this problem, but didnt find anything suitable. I am getting this error in multiple places: when i load pure master data into IOs like 0VENDOR, 0PLANT etc. or when I load DSOs like 0FIAP_O03.
When I checked the load in sdn, one of the solutions was to apply note: 1489178 , but in this case, the user had nothing selected in his 'semantic key' list. Whereas, in my case.. 0PLANT is checked ...eventhough the other fields are disabled. So, I think my DTP is accurate.. as 'plant' is the only key field here. But it still fails .. and so does 0VENDOR load. Moreover... the DSO load is crucial for our reports in Prod and its failure is a bigger issue for us.
Has anyone seen this problem? Is there another solution other than the above note?
Regards.

Hello Arvind,
If I select that option, will it delete one record if it finds 2 records with the same semantic key in 1 data packet. Also, will it delete a record if it finds that there is already a record existing in the data target with the same semantic key.
I think, both of the above scenarios will result in incorrect data. From my understanding, 'Handle Duplicate Keys' is mostly used to filter out master data.. as in some instances.. you might get duplicate entries.
But, in my case, the same error is happening in the case of data load from 0fi_ap_4 --> 0fiap_o03. What happens is... the overall status of the DTP becomes green.. but when you look at details section, the process stops at this message which is in yellow. Because of this, the DTP status in the PC remains yellow.. and finally turns red.. and the PC turns red.
From my knowledge, it appears more like a bug. I was hoping to find a SAP NOTE which has some manual instructions that can resolve the issue, since the above NOTE asks for a support pack upgrade.. which would need a whole lotta testing.
Regards.

Get file list from URL/web directory

Hey guys,
I have created a script for After Effects that can download multiple images from URLs that are given in an array. Now ideally what I want, is to get all the filenames of the files in a certain browsable web directory to be put in an array.
Unfortunately, I can't seem to figure out how to do this. Does someone have the knowledge here to help me out?
Thanks in advance,
Jorge

This is more difficult to do than it seems. Since the files are on a remote web server, you need to find some way to get the server to divulge its local file structure, which is not something most servers will do. The absolute best way is to have control over the web server and run some server-side code (PHP, node.js, whatever) to generate the file list on the server side and then fetch it with your client/extension/script. Other than that it's almost impossible to get a 3rd party server to divulge its file structure as far as I know, mainly for security reasons. So the #1 question is: do you have control over the server/website that you're trying to fetch from or not?

Error in payroll simulation rgdir already contains an entry with the same l

hi all
please help am having a problem when running a payroll simulation which says rgdir already contains an entry with the same logical key even when i run the correcting report i still encounter the same program
thnx

Did you try to run SAP program to rebuild payroll directory RPUDIR00, as sometime this gets corrupted ?

How to force OSX to connect to a specific Access Point i.e. manually choosing beetween different APs with the same SSID?

My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adso

My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adso

Planning 9.3 Duplicate member error: An object with the name 0000 already e

Hi All
I have 5 dimensions in my Planning applications namesly, Company, State, Product, Entity and Account
Company hase members called 0000(default) and 1000, 1001 etc
I also want add my Entity default member as 0000, but when I tried to add the memeber in my entity dimension I'm getting the Error : An object with the name 0000 already exists: Please help me to fix this
Thanks in Advance

U won`t be able to add the duplicate item name to planning application untill it would be the 9.5 version.
By the way, NotPlanning App`s nothing like as scanty - they has already an option "Allow duplicate item names" in 9.3 version..

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This doe not accure usingg IE 8.0 with the same printer.

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This problem also occurs with the web page on which this question is submitted. This doe not occur using IE 8.0 with the same printer.

These have nothing to do with Firefox.
C:\ProgramData\FLEXnet\Connect
\11\ISUSPM.exe
and
C:\Users\Vinegarhill-User Acc\Desktop\Malware Removal Programs\eXplorer.exe
This one - C:\Users\Vinegarhill-User Acc\AppData\Roaming\Mozilla\Firefox\Profiles\ak4dv58c.default\extensions\ \components\afom.exe - is probably the '''AFOM - Memory Recovery & Retention For Firefox Only''' extension.
https://addons.mozilla.org/en-US/firefox/addon/11922/
My advice is to uninstall that extension. IMO, you have too many extensions installed, and are asking for problems with Firefox. I am not against using a lot of extensions in Firefox ''(I typically have 45 to 50 extensions installed, but the mix of extensions you have scares me as potentially problematic.)''

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Similar Messages

Maybe you are looking for