Web-Outlook appointments which are one year before the current date are removed

Hi,
my Web-Outlook works fine with my iPHONE4s but the appointments which are one year befoer the current date are removed.
Is there an option to keep all appointments?
regards
Andreas

For the OST problem, delete the OST file and let Outlook create a new one.  But your problem may be that Outlook connects to Exchange 2013 using Outlook Anywhere only--MAPI RPC is gone--and for that you need a valid certificate.  So the self-signed
certificate is likely your main problem.
For a self-signed certificate to work, you must add it to every client as a trusted certificate.  That is hard to do with mobile devices, which is why it's recommended to obtain a certificate from a trusted public certificate authority.  You'd
probably find Go Daddy to be reasonably priced, and there are others.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

  • How to set SPD workflow to send email one day before the Due Date? ?

    I need to add a step in workflow for a item tracking list: send reminder email one day before the due date.
    I thought there is an Action in SPD: wait for [Due Date] to equal [Today]minus one day
    But there is no way to do that.
    I figured may be I need to create a calculated field [cal-date] that set to: =[today] plus one day.
    Then in workflow -
    wait till [Due Date] is equal to [cal-date], and send an email
    What is the formula for the above calculated field [Today] plus one day?

    Hi,
    You can add an approval action( such as Start Approval Process) -> click "Approval" -> go to “Change the behavior of a single task” . Then you will
    see the "When Task expires" stage.
    You can have a look at the blog:
    https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx 
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers
    if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Eric Tao
    TechNet Community Support

  • Adding a year to the current date field

    Hello,
    Can any one please help on how to add a year to the current date field.
    e.g 7/19/2011 plus a year = 7/19/2012
    Thanks,
    Han Dao

    If you had a field DateTimeField1 and wanted to display the following year in DateTimeField2, you could do the following in JavaScript;
    var d1 = util.scand("yyyy-mm-dd", DateTimeField1.rawValue);
    if (d1 !== null)
    d1.setFullYear(d1.getFullYear()+1);
    DateTimeField2.rawValue = util.printd("yyyy-mm-dd", d1);
    Good luck
    Bruce

  • Add one day to the current date

    Hi all,
    A stupid question...
    How can I add one day to the current date in a select. I want something similar to add one month to current date, but with days:
    something like:
    select TO_CHAR (ADD_MONTHS (SYSDATE, -1), 'DD-MM-YYYY')
    from dual
    Thanks

    select sysdate+1 "add one day" from dual;

  • User start date can not be before the current date

    I'm creating users using the Reconciliation engine. The start date attribute doesn't appear to be reconciling. I get many different types of parse errors. The closest I appear to get is when I set the Xellerate User resource object recon field to have Start date as a date field, i receive the error:
    "User start date can not be before the current date.".
    I'm using 9.0.1.1. And I AM trying to create a user that has a start date before todays date.

    Resolution was to patch to 9.0.1.1578

  • Parameter for Last Week, Last Month & Last Year from the current Date

    I have a crystal report that has a StartDate & EndDate parameters from the stored procedure that I am calling. Now i got a new requirement saying that my user wants a drop-down parameter in which they need to be able to select last week (Sunday to Saturday), last month, last year instead of manually selecting start date and end date parameters? Can anyone please explain me how to do this?
    (FYI, I am using Crystal 2008)

    Hi Naveen,
    You'll need to handle the logic in the Stored Proc's where clause.
    If you're using oracle, I have something like this in the Stored Proc's where clause for our reports:
    Where {Date_Field} Between
    Decode('{?Relative Date}',
    'Yesterday', sysdate - 1,
    'Last Week', Tunc(sysdate, 'IW')-7)
    AND
    Decode('{?Relative Date}',
    'Yesterday', sysdate,
    'Last Week', Tunc(sysdate, 'IW'))
    where 'Relative Date' is a prompt in the Stored Proc and 'yesterday'. 'last week' are the 'static values' in the prompt.
    -Abhilash

  • Is it possible to add more data to a prepaid plan before the current data allowance is used up?

    My data is nearly used up and I will b eon the road when it is completely used up.  I would like to add more now so that I do not have to pull off the road to login and add more data to my plan.  The website is very poorly designed and of it is possible to do this I can't find where it is.  Please do not tell me to call the CS line like you have everyone else who has asked similar questions.  If so please state that this is the only way to add more data to a plan/account as I don't have the availability to sit on hold for 40 minutes...  Thanks

        TSchlottman, we want that process to be as easy as possible for you. Happy to provide direction on how to change your plan. To change your minutes, text or data: Go to the Change Minutes, Text or Data page in My Verizon. If you have multiple lines on your account with separate plans, select the plan you’d you like to make a change to, and click Next. Select the data plan you’d like to have and click Next at the bottom of the page. Select the date when you want your changes to take effect and click Next. Review your changes and click Submit Changes.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

    Hi SAP Guru´s,
    Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
    Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
    Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
    This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
    Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
    The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
    This creates more issues at the store end as well as affecting business.
    We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
    Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
    Thanks in Advance.
    Thanks & Regards,
    P.P.Shankar

    Hello Shankar,
    Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
    Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
    See if it helps. The best option would still be that the 3rd part system considers the activtion date.
    Kind Regards
    Kaizad

  • Error "......requested a year before the transfer."

    Hi,
    Iam getting the error "For company code      1000 you requested a year before the transfer" while executing the program RABEST01. Can any one give the cause of the error and how to resolve it.
    regards,
    rss

    I assume you are trying to run an asset balance report. Are you trying to run it for a date befor your asset legacy transfer date ?Check your legacy transfer date, you will not be able to run any asset report in system before the transfer date.

  • Error message "Transfer date 30.06.2007 is more than one year after the clo

    Hi SAP expert,
    I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
    Hope u guys can help me. Thanking u in advance.
    Regards,
    Nazrul

    Hi SAP experts,
    any solution for my porblem?
    TQ

  • I have described for one year, but the Cloud storage still 2 Gb. Why I have not got 20 Gb?

    I have described for one year, but the Cloud storage still 2 Gb. Why I have not got 20 Gb?

    You have the Creative Cloud Photography plan Student and Teacher Edition (one-year), the storage space is 2GB for this CCPP.
    Are you facing any issue in installing this., please let us know.
    Regards
    Rajshree

  • In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

    In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to Firefox 4 (beta)

    Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
    You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

  • Function module to get 'Date one year in the past' in APO

    Hi,
    Required function module to get date one year in the past in APO.
    Thanks and regards,
    M.R.Reddy.

    Hi Reddy,
    Try these function modules
    /SAPAPO/DATE
    /SAPAPO/FISCAL_BDATE
    /SAPPO/MAPI_MAP_CREATDATE
    /SAPPO/MAPI_MAP_POSTDATE
    /SAPAPO/LCP_CALC_DATE
    /SAPAPO/VS_ORDER_GET_DATES
    /SAPAPO/PERIOD_CONVERT_DATE
    /SAPAPO/PERIOD_DATE_GET_FROMTO
    /SAPAPO/PERIOD_GET_DATE_RANGE
    /SAPAPO/PERIOD_GET_FOR_DATE
    /SAPAPO/PERIOD_GET_FROM_TODATE
    Regards
    R. Senthil Mareeswaran.

  • Required function module to get date one year in the past.

    Hi,
    Required function module to get date one year in the past.
    Thanks and regards,
    M.R.Reddy.

    Hello,
    You can check this:
    DATA:
    V_DATE1 TYPE D,
    V_DATE2 TYPE D.
    V_DATE1 = SY-DATUM.
    TRY.
        CALL METHOD CL_HRPAD_DATE_COMPUTATIONS=>SUBTRACT_YEARS_FROM_DATE
          EXPORTING
            START_DATE = V_DATE1
            YEARS      = 1
          RECEIVING
            DATE       = V_DATE2.
      CATCH CX_HRPA_VIOLATED_POSTCONDITION .
    ENDTRY.
    WRITE:
    / V_DATE1, / V_DATE2.
    Hope this helps.
    Br,
    Suhas

  • HT1386 is there anyway of going back to a back up before the current one?

    is there anyway of going back to a back up before the current one?

    I don't think so, once you created a backup it will override the old backup.

Maybe you are looking for

  • Good projector for macbook pro?

    Hi there, looking for a good projector that will work with my macbook pro, connectivty, or wireless would be great. I'm going to project my desktop onto canvas, i have vector layers to do some trace painting. so really just need hi-def still shots. B

  • Mail being marked as read automatically

    I have iOS 6.1.4 on iPhone 5 and multiple mail accounts. Gmail or Exchange - mail is being marked as read automatically even if I have not touched the mail. Not sure why this is happening but it is definitely an issue. I also beta tested version 7 be

  • Date Format in DD-MM-YY

    Hi I am using the PO output communication program. The date is coming format DD-MON-YYYY 00:00:00(02-MAY-2009 00:00:00). But I want in this format DD-MM-YY(02-05-09). How to do this in RTF Template? I tried the format masks it didn't work. oracle gui

  • Question about extents and segments

    Hi All, 10.2.0.4 in 2 node RAC on Linux 5.2 x86_64 I have been asked to answer the below two questions. Can any body help me in answering them. 1.Look at space allocated by segment and % used, de-allocate as necessary to de-frag the database - used a

  • Plese send me back If u know

    Hi ,i am confusing about the Rio package. I am taking one existing folder in C directory(like C:/XYZ) and this xyz folder can contain one sub folder and one file named as ABC(sub folder) and text.xml (file). my requrement is by using io package i nee