Web SAPConsole - Enter does not work?

Hi everybody,
hope one can help !
We installed the Web SAPConsole on a Windows Mobile 2005 device. Basicly everything works fine, but when you press <ENTER> in an input field it just goes "beep" and no submit is done.
The application itself works fine if you test it in e.g. the basic Windows XP Internet explorer. If you press ENTER the PAI module is called correctly.
We are using the "webdisplayer.dll" since this is the only one which is compatible with Mobile 2005.
Does anyone know any configuration setting that could fix this?
Thanks in advance for any help!

How did you resolved that?
We have same problem here.
Thanks.

Similar Messages

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

HT201210 Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Connect the iPod to irs syncing computer and restore via iTunes/ Place the iPod in Recovery mode if necessary to allow the restore.

Updating extended fields in SRM Business Partner Web Dynpro UI does not work

Hey community,
I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
- Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
- I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
- In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
- I added corresponding Input fields and labels to the WD layout.
- in view /sapsrm/v_mdfsbc I customized the new fields
-> the new fields are visible in the WD, and, oh wow, they even show the correct data!
-> Unfortunately, updating the fields does not work, but000 does not get any data.
Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
I also regarded SAP Note 1453747, but the code was already right.
Any Ideas? Many thanks in advance!
Steffi

Hi Stefanie Krause,
I am also facing the same problem
I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
I added corresponding Input fields and labels to the WD layout.
-> the new fields are visible in the WD,
-> i am able to visible the input field in WD,
But if add some value press on next tab and back to the screen the value will be refreshed .
Kindly help me
Thanks and Regards,
Maruthi.M

When I click "remember my user name" for web pages, it does not work for web pages - I have to login after every restart (eg Hotmail)

On websites I visit daily – newspapers, Hotmail, etc, even though I have clicked "remember me on this computer", it does not work. I have to log in every time I have restarted my computer (Mac OSX 10.5.8). Also, this may be related. I have iGoogle as my home page, but "themes", location, widgets, etc are not saved when I shut down.

* Such details are stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

Exchange Office Web Apps Preview Does not work in OWA (web)

I have setup Exchange 2013, Lync 2013, SharePoint 2013, IIS as a Reverse Proxy Server, an Office Web Apps Server, etc, etc. Everything is setup to use SSl (https) and everything works great EXCEPT... Office Web Apps... and ONLY via Exchange and OWA (exchange
browser-based access).
I can login via the intranet or Internet for everything (SharePoint, Outlook, and Lync) and Office Web apps functionality works flawlessly for all... except for Exchange and OWA.
If I login in to a web-based Exchange seeion, everything works right and I can see the various attachments.
For all other scenarios, Office Web Apps works (SharePoint, Outlook, Lync, etc), but in owa (web version of Outlook) I see that Office Web Apps is triggered (I see the Office Web Apps text and the dots that indicate something is loading)... However, it just
crashes and eventually times out (see image):
If I look in the error logs for the Web Apps Server I see this:
Essentially, it looks like that owa uses a distinctly different path to load the attachments into the Web Apps Server such that the file is not found!
What is happening? Why does Exchange OWA (web version of Outlook) somehow use a different path that fails to locate attachments in Office Web Apps, but Lync, Outlook, and SharePoint (both in Intranet and Internet) work perfectly?
This is VERY frustrating. Can anyone help?
Please?
Clearly, the reverse proxy is working, the certificates are working, OAuth is working, etc. It seems there must be some variable/path that is only defined in Exchange for OWA that uses a different path for Office Web App attachments and that path is WRONG!
Please, help!
Thanks

Hi,
Thanks for sharing. It’s glad to hear the good news.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Save to Web for JPEG Does Not Work

Originally when I installed CS4, save to web worked great. When I would downsize an image so as to post on the web, it would downsize with ease and I could save it as a JPEG.
Problem now: On the right upper corner of the page, I have it set for JPEG. When I downsize the image to 250, the "GIF" in the far left bottom corner does not convert over to JPEG. Thus, the image is not getting downsized properly as it used to.
I still have Photoshop Elements 7 on my computer so now when I want to downsize an image, I work on it first in CS4, get out of CS4 and then go into PS7.
Again, for weeks, the GIF would turn into JPEG on the far let. Now in CS4 it does not.
What do I need to do to fix this? I have added a screenshot to show my settings in CS4.
Thanks.

Are you saying if you select JPEG top right it still says GIF bottom left of the preview window?
How and where are you "downsizing to 250" ? 250 what?

Jce in web-inf/lib - does not work

Hi all!
I've got the following problem:
I accomplished to form an ear file that contains an ejb jar and a war file. The
ejb jar manifest includes several jars that are part of the ear file. Additionally
the web app needs the following jars: local_policy.jar, jce1_2_1.jar, US_export_policy.jar
When I put these files into the WEB-INF/lib of the webapp or into Manifest's Class-Path
of the ejb.jar I always get the same behaviour:
I can deploy it (yipieeh) but when I run the web app I get the following exception
(uieehh):
java.lang.SecurityException: Cannot authenticate JCE framework java.lang.SecurityException:
The JCE framework has unsigned class files. at com.sun.crypto.provider.SunJCE.a([DashoPro-V1.2-120198])
at com.sun.crypto.provider.SunJCE.c([DashoPro-V1.2-120198]) at com.sun.crypto.provider.PBEKeyFactory.<init>([DashoPro-V1.2-120198])
at java.lang.Class.newInstance0(Native Method) at java.lang.Class.newInstance(Class.java:237)
at javax.crypto.Support.getImplementation(Support.java:77) at javax.crypto.Support.getImplementation(Support.java:32)
at javax.crypto.SecretKeyFactory.getInstance(SecretKeyFactory.java:42)
Surprisingly it works when I put the jar files into wls6.1SP2's lib directory
respectively to wls's classpath! But what I need is one ear file that contains
everything ...
Please if you know this problem, a workaround or you have only a guess reply to
this message.
Thanks for every serious response,
Chris.

Well if you got the jar file to work in the /lib/ dir of the EAR file with
the manifest.mf Class-Path: entry then more power to you. This didn't work
for me for some reason, just let each ejb/war/etc compile to its own dir and
deploy it with all its dependencies included...
Your MalformedURL exception looks different than the security exception you
had earlier. Im guessing that putting the files in a common location in the
ear solved the class loading/security exception problem.
Your malformedURL problem is probably just that, a malformed URL.
Make sure all your associated metadata is pointing to the right place (use
paths of /someApp/somejsp.jsp, etc. dont use ../../somejsp.jsp)
make sure your using the right protocol (dont put one by default). This
would be my guess. Maybe its expecting an SSL call of the form
https://something or t3s://something but I'm not sure
hope this helps,
Michael Lee
Architect
AfterBOT
[email protected]
remove nospam_ to email
"Chris" <[email protected]> wrote in message
news:[email protected]...
>
First of all: Thanks for your response
"Michael Lee" <[email protected]> wrote:
Your getting that error because different wars run in different class
loaders. It does not trust the other class loaders files unless they're
signed in some way. I think one way you can do this is set up a
security.policy? file for each war that tells what files are allowedI was thinking about that but: How can I do that?
from
where. Here's the way the WLS class loaders work...
WLS system class loader
|
EAR class loader
|
EJB class loader
|
WAR class loader
everything down on the chain there can see up, but not vice versa. You
will
get a class not found
That way, the war files can call ejb's without problems, but EJBs can
not
access war file classes.
One other possible way around your problem is to add a /lib/... directory
to
your EAR and include a Class-Path: section in your manifest to point
to the
JCE files. I think this allows war files to see each others classes.You have to manipulate the EJB-Manifest and put the jar files into the earfile!
At least this is how it worked in my case! But I 've tried that alreadybut then
I get a very similiar Exception: something with can not authenticate: ..MalormedURLException:
no protocol ...
This
didn't work for me when I tried to create a shared library between
EJBs/WARs
but I didnt try to share files between 2 wars so who knows.
Hope this helps some,
Mike Lee
Architect
AfterBOT
[email protected]
Just remove nospam_ to email me
"Chris" <[email protected]> wrote in message
news:[email protected]...
Hi all!
I've got the following problem:
I accomplished to form an ear file that contains an ejb jar and a warfile. The
ejb jar manifest includes several jars that are part of the ear file.Additionally
the web app needs the following jars: local_policy.jar, jce1_2_1.jar,US_export_policy.jar
When I put these files into the WEB-INF/lib of the webapp or intoManifest's Class-Path
of the ejb.jar I always get the same behaviour:
I can deploy it (yipieeh) but when I run the web app I get the
following
exception
(uieehh):
java.lang.SecurityException: Cannot authenticate JCE frameworkjava.lang.SecurityException:
The JCE framework has unsigned class files. atcom.sun.crypto.provider.SunJCE.a([DashoPro-V1.2-120198])
at com.sun.crypto.provider.SunJCE.c([DashoPro-V1.2-120198]) atcom.sun.crypto.provider.PBEKeyFactory.<init>([DashoPro-V1.2-120198])
at java.lang.Class.newInstance0(Native Method) atjava.lang.Class.newInstance(Class.java:237)
at javax.crypto.Support.getImplementation(Support.java:77) atjavax.crypto.Support.getImplementation(Support.java:32)
at javax.crypto.SecretKeyFactory.getInstance(SecretKeyFactory.java:42)
Surprisingly it works when I put the jar files into wls6.1SP2's libdirectory
respectively to wls's classpath! But what I need is one ear file thatcontains
everything ...
Please if you know this problem, a workaround or you have only a guessreply to
this message.
Thanks for every serious response,
Chris.

Web service ChangeProduction does not work

Dears,
I tried to use web service ChangeProduction to change a SFC to another Operation in the same route, the other conditions(shop order, BOM, material) are the same. The request formate in soapUI is as below.
But the result is that I can see a production change action history with CHGRTR activity code, but Operation was not changed, the SFC still in the original operation.
What did I missed?
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:me="http://sap.com/xi/ME" xmlns:gdt="http://sap.com/xi/SAPGlobal/GDT">
 <soapenv:Header/>
 <soapenv:Body>
 <me:ChangeProductionRequest_sync>
 <!Optional:>
 <me:MessageHeader>
 <!Optional:>
 <gdt:ID schemeID="?" schemeAgencyID="?" schemeAgencySchemeAgencyID="?">?</gdt:ID>
 <!Optional:>
 <gdt:UUID>?</gdt:UUID>
 <!Optional:>
 <gdt:ReferenceID schemeID="?" schemeAgencyID="?" schemeAgencySchemeAgencyID="?">?</gdt:ReferenceID>
 <!Optional:>
 <gdt:ReferenceUUID>?</gdt:ReferenceUUID>
 </me:MessageHeader>
 <me:ChangeProductionRequest>
 <me:SiteRef>
 <me:Site>HP</me:Site>
 </me:SiteRef>
 <!1 or more repetitions:>
 <me:SfcRequest>
 <me:SfcRef>
 <!You may enter the following 2 items in any order>
 <me:Sfc>HP41</me:Sfc>
 <!Optional:>
 <me:SiteRef>
 <me:Site>HP</me:Site>
 </me:SiteRef>
 </me:SfcRef>
 </me:SfcRequest>
 <me:NewRouter>
 <!You may enter the following 4 items in any order>
 <!Optional:>
 <me:SiteRef>
 <me:Site>HP</me:Site>
 </me:SiteRef>
 <me:Router>ROUTE1</me:Router>
 <!Optional:>
 <me:Revision>A</me:Revision>
 <!Optional:>
 <me:RouterType>U</me:RouterType>
 </me:NewRouter>
 <me:PlacementOperation>
 <!You may enter the following 3 items in any order>
 <!Optional:>
 <me:SiteRef>
 <me:Site>HP</me:Site>
 </me:SiteRef>
 <me:Operation>OP4</me:Operation>
 <me:Revision>A</me:Revision>
 </me:PlacementOperation>
 <me:StepId>40</me:StepId>
 <me:UserRef>
 <!You may enter the following 2 items in any order>
 <!Optional:>
 <me:SiteRef>
 <me:Site>HP</me:Site>
 </me:SiteRef>
 <me:UserId>IVAN</me:UserId>
 </me:UserRef>
 </me:ChangeProductionRequest>
 </me:ChangeProductionRequest_sync>
 </soapenv:Body>
</soapenv:Envelope>

Hi Mike,
Thanks for your information.
My purpose is just to change the to another operation in the same route. I've tried to use shop floor xml interface to do the same thing, it works. The format is as below. The SAPME Change Production function UI also can work. Why web service can not work? Is it a bug?
<PRODUCTION_REQUEST>
<CHANGE_PRODUCTION>
<SITE>HP</SITE>
<USER>IVAN</USER>
<SFC_LIST>
<SFC>
<SITE>HP</SITE>
<ID>HP32</ID>
</SFC>
<SFC>
<SITE>HP</SITE>
<ID>HP33</ID>
</SFC>
</SFC_LIST>
<ITEM_BO>
<SITE>HP</SITE>
<ITEM>MA1</ITEM>
<REVISION>A</REVISION>
</ITEM_BO>
<ROUTER_BO>
<SITE>HP</SITE>
<ROUTER>ROUTE1</ROUTER>
<REVISION>A</REVISION>
<ROUTER_TYPE>U</ROUTER_TYPE>
</ROUTER_BO>
<BOM_BO>
<SITE>HP</SITE>
<BOM>BOM1</BOM>
<REVISION>A</REVISION>
</BOM_BO>
<NEW_ITEM>MA1</NEW_ITEM>
<NEW_ROUTER>ROUTE1</NEW_ROUTER>
<NEW_BOM>BOM1</NEW_BOM>
<PLACEMENT_OPERATION>OP2</PLACEMENT_OPERATION>
</CHANGE_PRODUCTION>
</PRODUCTION_REQUEST>
Edited by: Ivan_liu_tw on Jan 5, 2011 2:20 AM

Web Services button does not work

My friend purchased this D110 printer and he presses Web services button nothing happens. It is currently connected to Dlink router and we can access the printer from the laptop, however, when selecting product updates it says it is updated.
Also it does not display the email Id and even after selecting reset in the menu.....help
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

David:
Can you please:
1. Confirm that the Wireless button on the front of the printer has a solid blue light?
2. Press and release the Wireless button and confirm that an IP address is displayed in the top-right of the display. It should start with 192.168...
3. After confirming 1 and 2 above, return to printer home screen, and press the Wireless button and select Web Services Settings from the menu.
4. Take the appropriate option below:
A. If the "Remove Web Services" option is displayed, select it. Then continue with step B below to re-enable web services
B. If the "Enable Web Services option is displayed, select it.
5. Complete the Web Services enablement process, which should result in a print out of the Web Services info sheet with a new email address for the printer.
6. Go to www.hpeprintcenter.com and create an account and add your printer to your account using the printer code on the Web Services info sheet you printed out. This will allow us to track the results of your emails if they don't print.
7. After adding the printer to your account, send an email to your printer, ensuring you enter the email address correctly
8. If the email prints on the printer, you're good.
9. If the email doesn't print, look at your Job History on www.hpeprintcenter.com and let us know if you see an error message in the job list, and what it says.
Thanks!
Press and release the Wirel
I am an HP employee.

"hit enter" does not work at EP7 logon screen

Hi!
We have an EP7 SP11 with a problem:
After the user puts his name/password on the logon screen, he hits "enter" key.
However the logon screen does not do anything.
So he has to use the mouse to click the "log on" button so that he can log into EP.
Points guaranteed! Thanks a lot!

Hi,
that's strange. I just checked with my portal and it is working fine. What kind of browser are you using? Did you modify the logon screen? Is it working with Firefox?
Regards,
Holger.

The Web photo gallery does not work in Dreamweaver!

I made a web photo gallery in photo shop using CS3. The destination folder is the web site I'm using it in. It links OK in the rollover image and will work if you click on it(swf_file) in the site file, but it will not show any pictures when I try to preview it with a browser or load it on the remote site. It loads the file but all the images are whited out. This is very frustrating and it must be something simple...please advise...Thank You..Thagoodsport

What kind of a response are you looking for with a post like that, seriously? Change this or that in your unprovided code? Use this or that gallery, which may be the gallery you're already using. We don't know because you haven't mention specifics, provided any code, or any other relevant information to produce a helpful response. All you've said is you click a link and it's white. Kudos.
We're not mind readers and no one is looking over your shoulder watching what you're doing. Get it together... and when you do, post a link so we can see what you're talking about. jeez.

HTTPS Web Service datastore : does not work in case of proxy

Data Services 12.2 on Windows XP SP2
I've set up a datastore, type "web service", url is https://.... (an external web service, outside of our company)
I'm able to import the functions of this web service into the datastore.
In a DF, in a query transform, I call one these functions.
The job fails with this error message :
There is no response for the web service <searchCertificate>. Ensure that the network, web server, and service are running properly. Also ensure that the service client call time out is set properly.
I'm sure the web service is active. I have to pass a proxy.
When I do not have to pass a proxy (when I execute this job on my laptop not connected to the office network) the job runs fine !
How can you configure the axis2.xml so that https can run with a proxy ? (no problem to do this for http web services, but I do not see a solution for https web services !)
Thanks !!

Hi Sukarna,
the connection is not the problem.
Actually I've tested the scenario of abap proxy --> PI -->abap proxy for the same interface, it works fine. Only when I try ws instead of proxy, I got this error. Since proxy scenario works fine, the connection should not be issue.
any more clues?
Thanks

Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Web service scenario does not work

Hello,
I am prototyping (abap) ws --> PI --> (abap) ws scenario in PI 7.1 with sender and receiver CC of ws adapter.
In the sender system, I coded a abap program to call the proxy to send our ws message, message looks like being sent, in sxmb_moni in the sender system I can see the message, however the status is "Released for processing (WS)", and the sender service of the logged message is empty. In PI, no message is logged in sxmb_moni. Looks like message was sent out from the ws runtime engine of hte sender system, but it didn't reach PI. Does anyone have idea what this is?
Thanks
Jayson

Hi Sukarna,
the connection is not the problem.
Actually I've tested the scenario of abap proxy --> PI -->abap proxy for the same interface, it works fine. Only when I try ws instead of proxy, I got this error. Since proxy scenario works fine, the connection should not be issue.
any more clues?
Thanks

Web SAPConsole - Enter does not work?

Similar Messages

Maybe you are looking for