Web services: cannot fint "Create a Web Reference Manually"

what's up guys,
I'm using Application Express 2.2.1.00.04 ..
I'm trying to manually create a web service reference. I read the manual and found this:
To create a manual Web reference:
* On the Application home page, click Shared Components.
* Under Logic, click Web Service References.
* Click Create.
* For Search UDDI, select No and click Next.
* From the Tasks list on the right, click the Create Web Reference Manually link.
* The Create/Edit Web Service page appears.
but I can't find "Create Web Reference Manually" in the tasks list..
please help me..
thanks in advance..

Thanks Jason,
you don't know how much time you saved me! :)
I guess I'll have to upload it somwhere then use the URL.
thanks again,
Abdullah

Similar Messages

Lion install fail on my macbook "a recovery service cannot be created" please help!

Trying to install lion on my Macbook but keep getting install fail error saying a recovery service could not be created"
I have a usb hard drive connected with time machine and a bootcamp 12 gig partition with windows XP
Please help its driving me mad!

managed to do the upgrade by deleting my bootcamp partition with windows xp on it. Think it was this making it unable to create the recovery partition.
However after doing the upgrade I was not impressed with Lion at all! Although it had new features it was running far slower and took ages to boot and shutdown and applications took ages to load and got loads of "spinning discs" waiting for stuff to load which never had before as this is a new Macbook with 4GB of ram.
Anyway after reading people with similar problems made a Lion install disc from the original download and did a clean install and restored my system.
What a difference! Vast improvment in speed and loading and performance! Thank goodness!
Just thought I'd share!

Polycom CX 600 - Certificate web service cannot be found

Hi All,
I know, there are some same issues in the forum, bot those are not helpful for me. My problem is the same, via network cable (using just DHCP) the Polycom CX 600 Lync Phone are not able to sign in (however 1 month ago it was), returning the error message:
'Certificate web service cannot be found.'
I've double checked the DHCP options and all of them are OK! We are not using Windows DHCP, but the options are right, the 43 option containing the proper hexa value, the sub-options are also valid. From the DHCP log I can verify that the device got the
options, but the phone still not able to sign in.
From the browser I cannot open the device, by it's IP, just with FTP:\\'IP'. There I could find a .clg1 log file, but it not containing useful information for me.
This is the link of the log file: http://speedy.sh/XAgMT/system.clg1
If I run the DHCPUtil.exe -emulateclient on my workstation, I got the following:
Starting Discovery ...
Result: Failure = -2147014848
Or... sometimes it has a result:
Starting Discovery ...
Sending Packet (Size: 288, Network Adapter: 57.56.69.138, Attempt Type: Broadcas
t + Unicast)
--Begin Packet--
DHCP: INFORM (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE###--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Result: Failure = 1
I don't know what is that Failure = 1
Has anybody an idea???
Many thanks,
Tamás

Hi,
The DHCP options are good.
Finally, I was able to run the test-csphonebootsrap cmdlet, and I got the following error:
Result : Failure
Latency : 00:00:01.2179659
Error Message : No response received for getting root certificate chain.
Inner Exception:The remote server returned an unexpected respon
se: (417) Expectation Failed.
Inner Exception:The remote server returned an error: (417) Expe
ctation Failed.
Diagnosis :
Inner Diagnosis:Mime-Version : 1.0
X-Squid-Error : ERR_INVALID_REQ 0
Vary : Accept-Language
Content-Language : en
X-Cache : MISS from proxy.lsy.bud.dlh.de
X-Cache-Lookup : NONE from proxy.lsy.bud.dlh.de:3128
Connection : close
Content-Length : 3944
Content-Type : text/html
Date : Thu, 09 Jan 2014 13:24:47 GMT
Server : squid/3.1.10
Via : 1.0 proxy.lsy.bud.dlh.de (squid/3.1.10)
VERBOSE: Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
started.
Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
completed in '0.0001508' seconds.
Target server Fqdn or web service Url not provided. Will have to do DHCP
Registrar Discovery.
An exception 'No response received for getting root certificate chain.'
occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow
execution.
Exception Call Stack: at
Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
at
Microsoft.Rtc.SyntheticTransactions.Activities.GetRootCertChainsActivity.Intern
alExecute(ActivityExecutionContext executionContext)
at
Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Ex
ecute(ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)
at
System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRunti
me workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Server stack trace:
at
System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(
HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory,
WebException responseException, ChannelBinding channelBinding)
at
System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChanne
lRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message,
TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean
oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout)
at
System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessa
ge methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at RootCertChainService.GetRootCertChains(GetRootCertChainsRequest request)
at Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
'DHCPDiscover' activity started.
Starting DHCP registrar discovery...
Constructing a DHCP packet.
Adding DHCP option PARAMETER_REQUEST_LIST.
Successfully added DHCP option.
Adding DHCP option VENDOR_CLASS_IDENTIFIER.
Successfully added DHCP option.
Successfully constructed DHCP packet.
Trying to open an udp connection.
Remote IP : 255.255.255.255.
Local IP : 10.150.7.33.
\tCreating a new UDP client.
Udp connection successfully created.
Sending packet.
Remote IP : 255.255.255.255.
Remote Port : 67.
Packet sent successfully.
DHCP discovery message send. Waiting for DHCP servers to respond.
Data received successfully.
Remote IP : 57.20.120.85.
Remote Port : 67.
Response received for the DHCP Discovery message.
Constructing a DHCP packet from received raw data.
Extracting DHCP Options.
Successfully constructed DHCP packet.
Return value for DHCP option : SIP_SERVER.
Found registrar Fqdn : lyncpool.dlh.de.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1 - MS-UC-Client.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2 - https.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3 - lyncpool.dlh.de.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4 - 443.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5 -
/CertProv/CertProvisioningService.svc.
Successfully extracted sub option value.
Found web service Url :
https://lyncpool.dlh.de:443/CertProv/CertProvisioningService.svc.
Disconnecting.
DHCP registrar discovery activity completed successfully.
'DHCPDiscover' activity completed in '1.2179659' seconds.
'GetRootCertChains' activity started.
Trying to download a certificate chain from web service.
Web Service Url : http://lyncpool.dlh.de/CertProv/CertProvisioningService.svc
Could not download certificate chain from web service.
CHECK:
- Web service Url is valid and the web services are functional.
'UnRegister' activity started.
'UnRegister' activity completed in '3.78E-05' seconds.
VERBOSE: Workflow Instance ID 'a9313cfa-b82c-4bd2-9df6-81acca1bcbbc' completed.
VERBOSE: Workflow run-time (sec): 1.5083016.
It looks like the telephone are not able to download the root CA, but the webservice is available and reachable via port 80 and 443 too.... So, what is the reason? Why the Polycom CX600 is not able to download the root CA??

Web reference error wit a WCF service client

Dear all,
I have build as a studient demo a WCF service hosted under Windows Nt service with the following configuration file services:
<services>
<service behaviorConfiguration="MesServiceBehaviour" name="WCFServices.MesServices">
<clear />
<endpoint address="net.tcp://localhost:2000/MyService/ConvertCase"
binding="netTcpBinding" contract="WCFInterfaces.IMesServices"
listenUriMode="Explicit">
<identity>
<certificateReference storeName="My" storeLocation="LocalMachine"
x509FindType="FindBySubjectDistinguishedName" />
</identity>
</endpoint>
<endpoint address="http://localhost/ConvertCase" binding="basicHttpBinding"
bindingConfiguration="" contract="WCFInterfaces.IMesServices" />
</service>
</services>

<behaviors>
<serviceBehaviors>
<behavior name="MesServiceBehaviour">
<serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:8080/MyService/ConvertCase" />
</behavior>
</serviceBehaviors>
</behaviors>
Then I would liek to show my student how to use the metadata to access the service.
For that I have created a simple client application and add a web reference to my project pointing to my service adress. i get corresponding files created but just like this my client application do not compile with following error in autogenerate file :
// <auto-generated>
// This code was generated by a tool.
// Runtime Version:2.0.50727.3053
// Changes to this file may cause incorrect behavior and will be lost if
// the code is regenerated.
// </auto-generated>
// CODEGEN: The binding 'NetTcpBinding_IMesServices' from #pragma warning disable 1591
namespace 'http://tempuri.org/' was ignored. There is no SoapTransportImporter that understands the transport 'http://schemas.microsoft.com/soap/tcp'.
// This source code was auto-generated by Microsoft.VSDesigner, Version 2.0.50727.3053.
namespace Client.myServiceProxy {}
#pragma warning restore 1591
IN addition to that, how can I access the generated proxy from my client code ?
The proxy object I have created seems not visible is there something to add or change absed on generated code ?
I have never used such technique for proxy I am always using the channelFactory class but I would like to show my studient possibilities. And for me using autogeenrated code should at least compile and work straigt away..
Thnaks for help
sergeYour experience is build from the one of others

Can you tell me how you fixed this? I am having the exact same error - the generated proxy has nothing in it but comments:
There is no SoapTransportImporter that understands the transport 'http://schemas.xmlsoap.org/soap/tcp/'.
Nettie

Webi Reports - Object with id ... cannot be created because it has no name

I'm trying to launch a Webi report from our application using openDocument method. When the report is launched it fails with following error -
30567: Unable to save the document to the repository due to the following error: The object with id number '27731' cannot be created because it has no name. (Error: WIS 30567)
Before scheduling the report I'm calling setName method to set the name of the report but still it does not work. Any help would be greatly appreciated.
Thanks
Manas

Hi John,
I will try to give you some more background about this problem.
From our application we are not directly launching the report. We schedule it to run immediately and then view the instance created (using the instance id returned by the schedule call).
For scheduling we use the web services API (BIPlatform) and before scheduling we fetch all the prompts (again using a webservice API). The call is something like this -
WebiProcessingInfo wProcessingInfo = boWebIReport_.getWebiProcessingInfo();
After that we populate all the prompts with their corresponding values in application and schedule it. However the scheduling fails with the error I mentioned in the start of this thread and when we try to view it we are presented with a screen to enter prompts again.
From the scheduling error it looks like its failing because the name could not be set but I really doubt if thats the case. We use same calls to schedule and view Crystal reports also and they work perfectly. Only Webi is giving this error.
Thanks for looking into this.
Manas
Edited by: Manas Mandlekar on Sep 10, 2008 7:14 AM

Cannot add wsdl as web reference

Hi,
I am trying to add wsdl file as web reference to a visual studio project. But when I am trying to add the url, I am getting following message on right side : The HTML document does not contain Web service discovery information.
And following result is getting in out put.
"xx-yyy.serviceagent" Description
Methods
OpI ( As , As , As , As )
OpQ ( As , As )
When I am typing the wsdl url in browser, I can get the xml file. And also when I am using this wsdl in
SOAP UI, I can get the functions and I can call the services also.

Hi,
Thank you for posting in the MSDN forum. It seems that it is not the correct forum for this issue, since
this forum is to discuss Visual Studio IDE. I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cant add Web Reference for web service

Hi all.
I cant seem to add a web reference to an outside web service.
I have tested some code in Visual Studio and it all works fine, but
now Im importing the code into my dreamweaver website.
I have went to "Window" menu and then "Components", and along
the right hand side the components tab opens. It has a drop down
list with "Web Services" in it. Underneath it, it says press the
"+" button to add the service. But there is no plus button! I have
looked at manuals, and it does show a "+" sign beside the drop down
box, but its not on my Dreamweaver!
I am using dreamweaver 8. This is a full product as it is at
my work.
Any help would be great.
Thanks, Paul.

Hi all.
Further to my previous post, I have noticed that my
colleagues install of dreamweaver seems to have this "+" sign in
the components panel, so I have tried to add the web service to the
page using his machine.
But I now come up with a different problem! I click on the
"Add using WSDL" from the drop down lost at top, but when I click
on the drop down for the "Proxy Generator" there is nothing in it.
When I go into the menu to edit the proxy's, I can see the one for
ASP.net VB which is the one I would be using, but when I click on
"Done" and go back to the page with the WSDL URL and the proxy,
nothing is showing in the proxy generator!
Can anyone shed light on this?

Scheduling SSIS with Web Reference in Script Component fails.

I'm using SSIS on an SQL Server 2014 to create invoices in Microsoft Dynamics NAV 2015.
To create the invoices in NAV I use their Web services via a Script Component.
The reference is added using "Add Service Reference" - Advanced - "Add Web Reference" all according to the Dynamics NAV documentation. Found here: https://msdn.microsoft.com/en-us/library/dd355316(v=nav.80).aspx
FYI: You cannot add it as a "Service reference" but have to use the older "Web Reference"
The package will run without any problem in Visual Studio but as soon as I Deploy the Package and try to schedule it the package fails on the Script Component with the error:
"The binary code for the script not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully."
I've tried to run the package in both using the 32bit and 64bit runtime. I have also tried to copy the content of the reference.cs from the reference and added it to a new class according to the steps below. But I still get the same error.
1. Open Script component 'Select all files' icon in the solution explore
2. Drill down to webreference, and locate reference.cs file3. Copy the content of this file to a new class file.4.
Delete the webreference5 .Recompile your code, save and exit6. Open the project to verify that the reference is saved.
Environment information:
Windows Server 2012 R2 64 bit (x64)
SQL Server 2014 Enterprise Edition (12.0.2000.8)
/Fredrik

The code builds successfully in VSTA.
When I now try to deploy it to my "Integration Services Catalog" on my dev machine the package will execute without problem. When I deploy it to the production server I get the error. When scheduling on the production server I've created Credentials
and a Proxy with my own user (same as on my dev machine).
The production server has access to the web service that I'm trying to call (they are on the same domain network).
I have managed to get rid of the error in one package using the technique below. But to me this just seemst to be a strange workaround.
1. Open Script component 'Select all files' icon in the solution explore
2. Drill down to webreference, and locate reference.cs file3. Copy the content of this file to a new class file.4.
Delete the webreference5 .Recompile your code, save and exit6. Open the project to verify that the reference is saved.

Web reference WSDL not conforming to SOAP standard

I built a web service based on the BAPI_FLIGHT_GETLIST function module using the "create web service" wizard. The generated web service endpoint is active in SOAMANAGER transaction.
When I try to generate a proxy class in Visual Studio 2005 using the "Add web reference" tool the service method is shown as expected in the preview window. However, when I click the "Add Reference" button I get the following error message:
Custom tool warning: DiscoCodeGenerator unable to initialize code generator.
No code generated.
The Solution Explorer window shows the Web Reference object generated with components Reference.map, Reference.cs and a WSDL file; however the Reference.cs proxy class has no code in it and there are no objects for the method parameters.
When running the WSDL.exe program from the command line, the following error message is generated:
Microsoft (R) Web Services Description Language Utility
[Microsoft (R) .NET Framework, Version 2.0.50727.42]
Copyright (C) Microsoft Corporation. All rights reserved.
Warning: This web reference does not conform to WS-I Basic Profile v1.1.
SOAP 1.1 binding was not found: WS-I's Basic Profile 1.1 consists of implementation guidelines that recommend how a set of core Web services specifications should be used together to develop interoperable Web services. For the 1.1 Profile, those specifications are SOAP 1.1, WSDL 1.1, UDDI 2.0, XML 1.0 and XML Schema.
For more details on the WS-I Basic Profile v1.1, see the specification at http://www.ws-i.org/Profiles/BasicProfile-1.1.html.
Warning: no classes were generated.
Warnings were encountered. Review generated source comments for more details.
I've seen several documents that step through this process that work fine. Has anyone seen this issue before and found a solution?
I'm running NW2004s with SP14 on Windows Server 2003 R2. Clients are VS2005 on both XP & Vista - same result on both client environments.
Thanks,
Dorian.

Hi,
I'm not familiar with the tools you described to create the Web Service aboved SAP BAPI's, but i have 2 ideas which you can start with.
I am part of the team developed the "ESE for .NET" and on the last step of our tool we are using VS API to "Add Web Reference".
We have noticed 2 ocaasions that might interest you:
1. Can you please verify that the WSDL contains the "wsdl:binding" part ?
   according to the error message you described you are missing the binding part.
   As you know WSDL of .NET Web Service combined of 5 major sections: "wsdl:types, "wsdl:message, "wsdl:portType, "wsdl:binding" & "wsdl:service".
   .NET proxy generation can't be executed on a WSDL based on a Service Definition only, it must have the "wsdl:binding" part which always comes only with
   the End Points WSDL from SAP services.
2. Can you send me the WSDL file by email ? [email protected]
3. Another important issue for Runtime of the Services - SAP Web Service schema is a little different than MS schema, you should look for "parameters" inside the WSDL and change it to "paramter".
Hope this information will help you,
Nadav

The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a

Hi All:
I need help!!!
I am using axis2-1.5.1, jdk 1.6, eclipse 3.5, and Axis2_Codegen_Wizard_1.3.0 and windows xp.
I used Axis2_Codegen_Wizard_1.3.0 to generate the client stub and proxy.
I get the following error when I tried to call the web service:
package com.ttdev.ss.client;
import java.rmi.RemoteException;
import com.ttdev.ss.client.SimpleServiceStub.ConcatRequest;
import com.ttdev.ss.client.SimpleServiceStub.ConcatResponse;
public class SimpleClient
     public static void main(String[] args) throws RemoteException
          try
          SimpleServiceStub service = new SimpleServiceStub();
          ConcatRequest request = new ConcatRequest();
          request.setS1("abc");
          request.setS2("123");
          ConcatResponse response = service.concat(request);
          System.out.println(response.getConcatResponse());
          catch(Exception e)
               System.out.println("e.getMessage():"+e.getMessage());
Here is my SimpleService.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="SimpleService" targetNamespace="http://ttdev.com/ss" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://ttdev.com/ss" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<xsd:schema targetNamespace="http://ttdev.com/ss">
<xsd:element name="concatRequest">
<xsd:complexType>
<xsd:sequence>
     <xsd:element name="s1" type="xsd:string"/>
     <xsd:element name="s2" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="concatResponse" type="xsd:string">
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="concatResponse">
<wsdl:part name="parameters" element="tns:concatResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="concatRequest">
<wsdl:part name="parameters" element="tns:concatRequest">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="concat">
<wsdl:input message="tns:concatRequest">
</wsdl:input>
<wsdl:output message="tns:concatResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSOAP" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="concat">
<soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServiceSOAP" binding="tns:SimpleServiceSOAP">
<soap:address location="http://localhost:8080/axis2/services/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the dos-prompt, I get the following error message:
[INFO] Listening on port 8080
[ERROR] The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a
xis2/services/
org.apache.axis2.AxisFault: The service cannot be found for the endpoint referen
ce (EPR) 127.0.0.1/axis2/services/
at org.apache.axis2.engine.DispatchPhase.checkPostConditions(DispatchPha
se.java:65)
at org.apache.axis2.engine.Phase.invoke(Phase.java:334)
at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:251)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:160)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostReq
uest(HTTPTransportUtils.java:167)
at org.apache.axis2.transport.http.HTTPWorker.service(HTTPWorker.java:26
6)
at org.apache.axis2.transport.http.server.AxisHttpService.doService(Axis
HttpService.java:281)
at org.apache.axis2.transport.http.server.AxisHttpService.handleRequest(
AxisHttpService.java:187)
at org.apache.axis2.transport.http.server.HttpServiceProcessor.run(HttpS
erviceProcessor.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Thank you for your help!!!
Yours,
John.

I had the same issue and managed to fix it.
I am using tomcat and had a filter configured for AxisServlet to open a hibernate Session. Somehow (I did not figure it out yet) this filter afects the way the AxisServlet resolves the EPR.
My fix was - remove the filter. It worked. Now I am trying to figure out why.
If you have any clues, please drop a line.

Web Reference inside Script Task causes Binary code for script not found error

I am attempting to access a SOAP web API (sales force) from a SSIS package. To do this I created a script task.
Inside the script task I went to Add Service Reference. Then I click advanced to make it a web reference. Then I point it to the WSDL file and give it a name SFEnterprise. It successfully finds and adds the Web Reference to the script task.
I leave scriptMain.cs alone and I have no warnrings and no errors. Now in the solution explorer I right-click the script task and hit BUILD. I see the message from Output that BUILD succeeded.
I close the VSTA script editor and now I am back on the control flow window. However I have a red X on the script task with the following message. "The Binary code for the script is not found. Please open the script in the designer by clicking EditScript
button and make sure it builds successfully"
But it does build successfully! And I have not even added any custom code except for the web reference using the WSDL file.
I am using SSIS 2012 and Visual Studio 2012. I have been reading about this binary code error message on Google searches and suggestions about delay validation and turning off pre-compile do not apply to SSIS 2012.
Is SSIS not capable of doing this?

I was wanting to use the 2.0 coding style of accessing the soap service which is supported by adding the web reference vs. adding a service reference. But using a service reference instead of web reference actually allows the script task to compile. This
is really odd behavior. I wonder why one works and not the other.
Changing my C# code over to service reference coding style to access the SOAP service was still returning an error. When I added a break point I found the error message "Could not find default endpoint element that references contract in the ServiceModel
client configuration section"when calling new SoapClient();
I found this page http://www.sqlis.com/sqlis/post/Where-is-my-appconfig-for-SSIS.aspx and after I copied the System.ServiceModel app settings from the script task app.config to the DTSDebugHost.exe.config it was able to successfully login to the endpoint
during package debug mode.
This means I will have to edit the SQL Server DTS config files on the prod SSIS server to get the package to actually run in the job agent.
So for now I am good I think just plugging away at coding what the script task is actually supposed to do now that is can actually login.

Dynamically loading the url of a web reference object in C#

Hi,
We have a number of assemblies (C# - VS 2010) that access third party web services via SOAP. The url to access the site is part of the web reference object.
We have need to be able to change the url used to access the service at run runtime when conditions require.
What would the be the best practice of dynamically setting the url to be used at run time?
Thanks in advance.
SanDegan99

You could specify the URLs as keys in the application configuration file (App.config or web.config) of the main application:
https://msdn.microsoft.com/en-us/library/system.configuration.configurationmanager.appsettings(v=vs.110).aspx
https://msdn.microsoft.com/en-us/library/aa374182(v=vs.85).aspx
App.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
<appSettings>
<add key="url1" value="http://www.url.com/test.asmx"/>
</appSettings>
</configuration>
You can then retrieve these values using the ConfigurationManager class in any assembly that is referenced from the main application like this (add a reference to System.Configuration.dll):
string url = System.Configuration.ConfigurationManager.AppSettings["url1"].ToString();
You can change the values of the keys in the application configuration file without having to recompile the application.
The other option is to specify the URLs in a database or some other persistent storage from which you read at runtime but configuration files are generally used to store these kind of variable application settings.
Please remember to mark helpful posts as answer to close your threads and remember that any new question you may have should be asked in a new thread of its own.

Template for Web Reference Movie

I had been using QuickTime Pro to produce Web Reference Movies and associated files. They seemed to work but thought they were having problems with the campus filewall under wifi but that might not be a problem after all.
I finally worked out that Compresor 4 expects to output .mov files when creating web reference movies. Compressor 3 had a template for web reference movies but its not provided with Compressor 4. I will play with the settings (comparing with QTPro files) but thought I'd ask if others have any suggestions/recommendations for output stream settings.
Thanks, David

just a bug Apple needs to fix.

How to add Web References

Hello Experts,
I am developing Web application in ASP NET for B1 , i am stuck up with adding web references , i have gone through B1WS doc but got no solution
Please Suggest
Quick Reply will be very helpful

Hi,
Have you searched the forum?
You may check this first: Re: SAP B1WS
Thanks,
Gordon

Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]"

Is there a solution to years old error message "Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]" I have been trying to create a restore point or image on an external hard drice, but I get the quoted message
and the system is NOT in safe mode. I have reviewed all the previous suggestions on this forum to no avail. Are there any new suggestions. My computer had Windows 7 installed and I have no source to re-load the OS. Ralph

Hi,
So actually you're not in safe mode (not black background, no "safe mode" on the left-bottom of the screen), right?
I think something is causing your PC thinking itself is in the safe mode, run sfc/scannow and chkdsk /f/r, check if the two tools can find any error.
Or perform a startup repair in recovery console, check the result
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Yolanda Zhu
TechNet Community Support

Web services: cannot fint "Create a Web Reference Manually"

Similar Messages

Maybe you are looking for