Web template "0ADHOC" does not exist in the master system error

Hi to all,
The Web template "0ADHOC" does not exist in the master system.
Error coming while executing query on web template.
Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
Please can anyone tell me what the problem is?
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Similar Messages

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

"WEB_0ADHOC" does not exist in the master system

I inserted a query into report designer and made a few changes (font/adding columns, custom text) and when i'm trying to launch it in Portal ...this is the error msg i get
The initial exception that caused the request to fail, was:
The Web template "WEB_0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "WEB_0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:80)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:83)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:126)
In the web application designer, i tried to see if the WEB_0ADHOC is available or not ... this is the msg i get:
Diagnosis
You have attempted to open query ! from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
i even checked in the IMG setting to see if this is the default template for enterprise reporting and it is.
How do I make it available in the system.
Message was edited by:
voodi
Message was edited by:
voodi

Hello,
Someone changed the default templates in your system. WEB_0ADHOC is wrong.
Delete the entries and restart your java server (because of cache). This will reset the changes to default. All templates for new runtime must be visible in the transaction SE38, program RS_TEMPLATE_MAINTAIN_70. source code must begin with <bi:bisp ...
Regards, Karol
SAP NetWeaver BI, Development

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Experiencing "The type or namespace name 'DirectoryServices' does not exist in the namespace 'System' (are you missing an assembly reference?)" compilation error

I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
I am using the following for development:
MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
MS .NET Framework Version 4.5.50938.
Here are my project solution's current items:
Web.config:
<?xml version="1.0"?>

<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
</system.web>
<system.webServer>
<defaultDocument enabled="true">
<files>
<add value="Login.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
Web.Debug.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">

<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />

</system.web>
</configuration>
Web.Assemblies.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<assemblies>
<add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</system.web>
</configuration>
Login.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
    
<asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
<br />
<br />
        
<asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
   
<asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
<br />
<br />
        
<asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
   
<asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
<br />
<br />
                           
<asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
  
<asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
<br />
<br />
<br />
                            
<asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
               
<asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
<br />
<br />
  
<asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
<br />
  
<asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
</div>
</form>
</body>
</html>
Login.aspx.cs:
using System;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
private string uName; // user-entered username
private string pWord; // user-entered password
private int loginLoadCycles; // just keeping track of how many times Page_Load is called
protected void Page_Load(object sender, EventArgs e)
if (this.loginUserNameTextBox.Text == String.Empty &&
this.loginPasswordTextBox.Text == String.Empty &&
this.loginUAradioButton.Checked == false &&
this.loginAFradioButton.Checked == false)
this.loginInit();
this.setLoginVisibilityAndFocus();
this.loginLoadCycles += 1;
private void loginInit()
this.uName = String.Empty;
this.pWord = String.Empty;
this.loginLoadCycles = 0;
private void setLoginVisibilityAndFocus()
// Decide on whether or not the Login submit & cancel buttons should be enabled or not
if ( this.loginUserNameTextBox.Text == String.Empty ||
(this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
this.loginSubmitButton.Enabled = false;
this.loginCancelButton.Enabled = false;
this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
else
this.loginSubmitButton.Enabled = true;
this.loginCancelButton.Enabled = true;
if (this.loginPasswordTextBox.Text == String.Empty)
this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
else
this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
this.SetFocus(this.loginUAradioButton);
else if (this.loginUserNameTextBox.Text == String.Empty)
this.SetFocus(this.loginUserNameTextBox);
else if (this.loginPasswordTextBox.Text == String.Empty)
this.SetFocus(this.loginPasswordTextBox);
else
this.SetFocus(this.loginSubmitButton);
protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
// For some reason, after specifying that the password entry box's textmode to 'Password' setting,
// the UI's password textbox is emptied
this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
"This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
"Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
protected void loginSubmitButton_Click(object sender, EventArgs e)
this.loginLoadCycles = 0;
this.uName = this.loginUserNameTextBox.Text;
this.pWord = this.loginPasswordTextBox.Text;
if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
else
// set colors to show that this is an error instead of a status message or instruction
this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
protected void loginCancelButton_Click(object sender, EventArgs e)
this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
// Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
this.loginInit();
protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginUAradioButton.Checked == true)
this.loginAFradioButton.Checked = false;
msg = "Thanks for specifying that you are a TUPSS Associate. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginAFradioButton.Checked == true)
this.loginUAradioButton.Checked = false;
msg = "Thanks for specifying that you are an Area Franchisee. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
private void loginLADPauthenticate(char whichActiveDirectory)
String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
if (whichActiveDirectory == 'U')
msg += "UPS Corp's Active Directory...";
else if (whichActiveDirectory == 'A')
msg += "The UPS Store's Franchisee Active Directory...";
msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
this.loginStatusInstructionTextBox.Text = msg;
this.loginStatusInstructionTextBox.AutoPostBack = true;
// Authenticate using LDAP
protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
I confirmed that I have System.DirectoryServices.dll located in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
not only to all folders in its path but also to the DLL file itself.
I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
Thanks so much,
hguico @ The UPS Store

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

The type or namespace name 'Microsoft' does not exist in the namespace 'System'

I got the reference error while building the code.
I have added the system and microsoft.sharepoint reference error. But still showing the same error.
Need help!

Hi
According to the error message, please check that whether the target version of the .NET Framework of your application has been changed.
Please do as follows:
1. Make sure your project is target on .NET 3.5 .
2. Add
the namespace in your code.(using Microsoft.Office.InfoPath)
More information about
Troubleshooting .NET Framework Targeting Errors:
http://msdn.microsoft.com/en-us/library/vstudio/cc668079(v=vs.100).aspx
A sample about
Creating a Basic Form Template with Code for your reference:
http://msdn.microsoft.com/en-us/library/aa942693(v=office.14).aspx
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Query does not exist in the BI System (Object QU ) 0analysis_pattern

I get this message when I validate or load this template. We just installed it. Does anyone know what Item is missing. I have searched OSS and all forums.
Thanks
Will reward any help.

Hi,
0ANALYSIS_PATTERN contains a query definition w/o name (query will be specified dynamically). In general this is a warning. In normal templates it is an error.
Regards, Karol
SAP NetWeaver BI, Development

Bex Web application "2" does not exist

Folks,
We are getting this error :
<i><b>Bex Web application "2" does not exist . The application was either ended by a timeout or an error occured , which was entered into the trace log</b></i>
Please advise
Thanks,
Manish

This happens during a session timeout or error.
You can login back and it should work.

LifeCycle Manager: The kind 'Note' does not exist in the CMS

Hi there,
I'm trying to promote a Crystal Report from one relatively fresh XI 3.1 environment to another fresh XI 3.1 environment (TEST to PROD) using LifeCycle Manager, and for this report, which has no dependencies, I get the following error when I do a Test Promote or actual Promote:
Commit Status=Commit attempted and failed, Promotion Status=Failure : com.businessobjects.lcm.utilities.LCMException: com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'Note' does not exist in the CMS. (FWM 04030)
Has anyone encountered anything similar to this? I can't find any InfoObject that logically relates to the type/kind 'Note'. Perhaps it has to do with discussions?
Thanks,
Allan

Hi,
Can you try promoting it with the security option enabled.
Based on the error condition it seems that the discussion plugin does not exist in the destination system.

The name 'InitializeControl' does not exist in the current context

Hi ,
i try to run my visual web part in vs2012,without adding any code to template i deploy web part into sharepoint2013.
but i got below error
The name 'InitializeControl' does not exist in the current context.how can i solve this error
Thanks,
Madhu.

Here's my ASCX file that breaks the code generation:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="VisualWebPart1.ascx.cs" Inherits="Ensol.ViewAttachmentsWP2.VisualWebPart1.VisualWebPart1" %>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Repeater ID="Repeater1" runat="server">
<HeaderTemplate>
<table>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td><a href="<%# Eval("FileUrl") %>"><%# Eval("FileName") %></a></td>
<td><asp:LinkButton ID="LinkButton1" runat="server" CommandArgument="<%# Eval("FileName") %>" OnClick="LinkButton1_Click">Delete</asp:LinkButton></td>
</tr>
</ItemTemplate>
<FooterTemplate>
</table>
</FooterTemplate>
</asp:Repeater>
</ContentTemplate>
</asp:UpdatePanel>
No matter what I've tried to do with my webpart, the VS still generates an ASCX.G.CS file with no content at all. What I'm doing wrong?

Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist

Hi guys ,
I have actvated the above mentioned template in business content but when i performed a check in RS_TEMPLATE_MAINTAIN_70 , iam getting the followiong error.
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Web Item Report error: The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
The report cannot be opened
The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
Check whether the report is at this location and it can be read
Contact your system administrator. This error was recorded
Can anyone have some idea on this..
thanks

Any help on this??

New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidData: (Microsoft.Analy...viceApplication:
   NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
    + FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
   wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Web template "0ADHOC" does not exist in the master system error

Similar Messages

Maybe you are looking for