Web Template Using Global View for Hierarchy Level Display Only

Hi,
I have a requirement for a report that will display a hierarchy with differing detail depending on level example
Level A
        A1
        A2
Level B
Level C
         Level C1
                Level C1a
                Level C1b
                Level C1c
I beleieve I can do this by creating running the Bex Query with broad enough parameters to allow me to get a data set that includes all nodes in the hierarchy and then defining a global view based on that.
I have two questuions, though,
1. Is my assumption correct?
2. If I can do this is there anyway I can set the global view so it only picks up the formatting and not the variable values I used when I run the query? So far when I have been playing with this the web template is prepopulating the variables with values I used to exute the quey before saving it as a global view. Is there any way to turn the prepopulation of the variables off?
Thanks in Advance,
Andy

Hello,
thank you for you quick response. I am sorry, I am already talking about a solution in the 7.0 Landscape. What do you mean by <i>"available standard"</i>? Are you talking about the Web Application Designer? Can you say me where I can find a more detailed description/give me that description yourself?
And how about that thresholds, where do I set them and how can I maintain them? Are they "hard coded"?
Thank you for any further suggestions in advance
Michael

Similar Messages

Found 1 web using missing web template 14001 (lcid: 1033) with compatibility level 14

Hi,
I am receiving the following error when I try to upgrade an SP 2010 content database to SP2013: "Found 1 web using missing web template 14001 (lcid: 1033) with compatibility level 14".
How do I find out what that web template is? Or, how do I move all of the web templates from the old sp to the new sp?
thanks,
Sherazad
Sherazad

I believe this PowerShell should work:
> Get-SPWebTemplate
|
select
ID,
Name, Title | Sort-Object
ID
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Web Template with Query Views not showing Variable Screen

Hi, I have a Web Template using 3 Query Views based on a single query. The Query has 2 mandatory variables (CALMONTH and VERSION). When I execute the Web Template it does not prompt with the Variable Screen, and presents the report with the Variables that were in place when the view was saved/created. I'd like the Variables to appear.
1. Is this the correct behavior?
2. Is there any documentation that might describe this behavior.
3. Should I just copy the query and create 3 queries instead?
Note: I did a search in SDN and found lots of similar threads, but nothing exact. Also, I know about forcing the variable screen, but I thought I shouldn't have to do this.
Thanks!

k forget the view, when you run the main query... do you get a pop up for variable screen,. yes or no?
if you dont then try to run another query and see if you get the variable screen as well. if you dont then its a bug. if you do then something is wrong in your query and its having an issue, but if you do get the screen on your query then it is a setting in your web template not in your query.
you can also try to run the query in RSRT backend ...

Create a custom web template using VS 2012 with web features,site features sections applied

hi,
Want to create a custom web template using VS 2012 in my SP 2013 environment. i know "Vesku" has posted a great artice on this [ based on prev. version of SP].
here -
http://blogs.msdn.com/b/vesku/archive/2010/10/14/sharepoint-2010-and-web-templates.aspx
i am looking for a code based article which has step by step process which provides how to add the site features, web features and attach the eventreceivers etc etc on sitecollection creation when i apply this template from central admin.
can anyone provide me any links / any source how to create a custom web template with one / two custom features - site features element and web features element , / master page etc ....
I am stuck with this. as part of my reqmnt, i need to create a webtemplate with all the customlistinstances, custompagelayouts, custom masterpages, custom appln pages, custom web parts.
help is appreciated !
Das

The problem is that Web Templates are deployed to a gallery in a site collection and aren't available in Central Admin when creating a new site collection. YOu have to create the site collection without choosing a template and then choose your web
template when you first access the root site in the site collection. Here's an article that discusses that process here:
http://sharepointchick.com/archive/2011/02/10/using-web-templates-to-create-site-collections.aspx
Other than that Vesa's article is still the best one and works essentially the same in 2013 as it does in 2010.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Web Template - Using two Queries

Hi Gurus,
Can I use one web template, using two or more queries? And What web iten I need check for don't appear twice the variable ?
Tks,
Magani

Hi,
You can use one or more than one query in a web template.
Keep in mind that you have a relation one to one betweeen Table (Web Item) with Query, if you want to include 5 query, you will nedd 5 Tables (Web items), and you have to configure in every sigle table the corresponding query that you want to browse.
Regards
Assigns points if useful

How to use same view as editable and read only in ADF

Hi,
how to use same view as editable and read only in ADF ?? How can we achieve this in TF's ???
-mrudul

Hi,
Steven Davelaar wrote a presentation about this "Building Highly Reusable Taskflows"
Starting slide 14 is where your use case comes into play
Frank

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

SICF service unable to use Global Settings for System Logon configuration

Hi,
I've create a bespoke Web Dynpro application, and have changed the appearance of the login screen.
(Within transaction SICF, select the service, then choose Error Pages, System Login, Configuration).
When I modify the settings using "Define Service-Specific Settings", it all works fine, i.e. I get the correct layout template, MIME graphics and display elements.
As these settings are generic and can be applied to other Web Dynpro applications, I thought it would be a good idea to make these settings Global. "Save as Global Settings" works fine - I am then able to pick up these settings when viewing a different service. However when actually trying to logon, the logon page is the default Netweaver one rather than the modified one that I have specified in the Configuration page.
There's no mention in the Help of any other steps that you need to perform in order to use Global Settings, but I think there must be something else I've missed as it completely ignores my settings when the "Use Global Settings" is selected, yet the settings themselves are perfectly fine as the login screen is correct when the settings are Service-Specific.
Can anyone help?
Thanks in advance,
Vindaloo

Hi,
you can refer SAP Help on Configuration Settings at, http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/3a0623902131c3e10000000a42189d/frameset.htm
also refer http://www.sapdev.co.uk/sap-webapps/sap-webdynpro/wdp-logon.htm
I hope this will help you.
Thanks,
Chandra

Odd behavior on web template used to update real-time cubes

Hello all
This is my first time posting on this forum so please excuse any blunders.
I have a situation wherein 2 queries (one built on an aggregate level which is set up on a multiprovider containing a real-time cube and the other built on an aggregate level set up directly on a real-time cube) are being used to update data. For both of these queries, I'm trying to fill in fields such as user, created by, time, date etc. These fields are being filled in the custom class "ZCL_LOC_CR_LINE_ITEM" and all of the settings are correct for the aggregation level/infoproviders.
However, I'm encountering 2 problems. Firstly, for one of these queries on the web template, the fields I want filled are not getting filled in by the exit. In fact, I put hard-code break points in the exit's DERIVE method but the control is not even going in there. But for the other query, the control flows into the user-exit correctly when I hit the return key after populating all of the remaining characteristic fields on the input screen. Secondly, for the first query, the fields are not input-enabled. But I've set up both queires to be more or less similar in the sense that the fields to be populated in the user-exit are not on the query screen etc. I'm stumped and would appreciate some help from the experts out there.
Regards
Sam

Regarding yor first quesiton, if the exit is not being reached, then most likely you have not correctly defined the characteristic relationship in the planning modeler. For it all to work, go to the planning modeler for the infoprovider that you are deriving the characteristics. Ensure that your source characteristics are all contained in the aggregatin level being used by the planning query in question. Also ensure that none of the target characteristics are contained in the aggregation level.
Also, make sure that the "inactive" checkbox is not marked for the individual characteristic relationships.
Note that whether or not the query is on an multiprovider or a real-time sube, the characteristic relationships are always defined directly on the underlying real-time cube.
Regarding the second question, for a query to be input-ready:
-There must be a real-time cube in the query directly (or indirectly via mutliprovider)
-The query must start up in change mode (or be switched into change mode)
-Cell(s) must be defined as input ready either by their settings in the row or column
-Every characteristic in the aggregation level must be fully qualified (including currency,UOM, or any nav attributes used as selections)
- note that when using a mulitiprovider, it is necessary to specify the real-time infocube name in the planning cell/row/col selections
If all of the above are met, try drilling down in the query once it is presented and see if anything is unaccounted for

Activating auto PO Check Box in the purchasing view for plant level.

Hi Techies,
Right now i have an issue related to auto PO check box in the purchasing view for the plant level. There are three plants A,B,C.. For the plants A and B the automatic PO check box is visible and the user is able to provide input values. But when it comes to plant C the auto PO field is not available and hence the user is unable to provide input for auto PO.
Is there any configuration to be done to activate the auto PO check box in the purchasing view in the material master with respect to plant C?
If so could you please guide me with the settings?
Thanking you in advance.
Regards,
Gopalakrishnan.S
Edited by: krishu100 on Jul 13, 2011 2:25 AM

Hi Techies thanks for you all info.
Now today i just tried to created a new HALB Material in the plant C which i had issues yesterday. But when i created today a new material the Auto PO feild is available for entry. THen i tried to go to the material which i created yesterday for editing it. But i was unable to do it.
I checked the transactions which most of you referred(Very Useful). I found that all the plant s had the same screen selction setting and set as Opt Entry. The field screen referrence for MM01, MM02 Transaction s are also set as opt entry. The screen reference for HALB is also set as Opt entry. Still i m not able to find the field auto PO in the purchasing field.
So does it mean that a material once created without auto PO enabled or visible can never be updated after that? But i think its not the case and we should be able to edit it(correct me if im wrong).
Really having my fingers crossed to find a solution for this issue.
Regards,
Gopalakrishnan.S

Caching web templates using the portal cache - experiences

Hi,
To improve performance, I would like to cache a (7.0) web template in the portal. I adjusted the iView by changing the following fields:
Cache Level to shared
Cache Validity Period to 1 hour
However, the template still takes 10 seconds to load, the same time as before.
The template doesn't have a variable screen that is shown (all variables are optional), so according to note 1002778 'Caching in the Enterprise Portal' there doesn't seem te be a problem.
Do you have suggestions why it doesn't work, and if there steps I could perform to make it working?
Cheers,
Daniel

Hi,
Finally SAP OSS has answered me on portal caching in BI 7.0. From their reaction:
"In the new Portal infrastructure in NetWeaver 7.0 the iView properties
for iView portal caching are not evaluated by BI as it was in BW 3.5.
In 3.5 portal infrastructure this feature had special implementation
which was evaluated as not situable for the NW 7.0 infrastructure.
The iView properties are visible, even if they do not fit to BI
iViews as we do not have the possiblity to switch off this visibility
for some types of iViews.
Nevertheless, some parts like Web Templates, Web Items are stored
in the cache on Java Server and are reused when the same Template
is loaded again.
So in 7.0 we do not have functionality like in 3.x for storing of
the generrated HTML. As of my knowladge, there is no workaround for
that (besides what you have mentioned."
So we'll have to wait for the BO stuff, which has pretty good pre-calculations options which can serve as cache.
Kind regards,
Daniel

Use global Variable for Formatstring

Hello
I wanna use a global variable for a format string. see picture. But I don't work.
Can anybody give me an idea, why it won't work?
Thanks a lot!!!
Attachments:
GlobalVariable.jpg ‏61 KB

As others said, the problem is not the global.
See attached a picture of how to do what you want. Since the Format String is unknown at edit time, you must provide the types to all inputs that are not DBL.
From your example, the while loop has been coded exactly like a for loop. It can be replaced with a for loop with auto-indexing, unless you really want the local variable to be update at each iteration every 50 ms. This delay is not necessary unless the computed array is huge and you want to leave some CPU time to other code in your application. Even then you can enter a delay of 0ms to force to swap to other tasks.
I don't know what your INT>BOOL VI does but using Scan from String you can read a number directly into a boolean. The number i
s rounded to an unsigned integer and 0 is False and >0 is True.
For example you scan a string for a boolean with format string %d.
"0" --> False
"24" --> True
"-18" -- False (coerced to unsigned = 0)
You scan a string for a boolean with format string %f:
Negative number up to "0.5" --> False (coerced and rounded to 0)
Number greater that 0.5 --> True
LabVIEW, C'est LabVIEW
Attachments:
diag.jpg ‏15 KB

Send different different email templates to the approver for each level

Hi,
I have implemented 4 level sequential BPEL approval flow,
And I have 4 email templates corresponsding to each approval level.
Now, how to send these different email template upon reaching to different approval level.

Good afternoon tedkord,
Welcome to the forum! I’m sure you were very excited to get your hands on the Samsung Galaxy Note 4 after its release. It is disheartening to hear that your experience with the $200 gift card trade-in promotion may have gone so awry due to some misinformation.
It is true that a 2-year agreement or installment billing agreement is required to qualify for this promotion. Our associates and agents should have all of the necessary information available to provide our customers with accurate and transparent information. It certainly seems like this may not have occurred during your interactions. I apologize if this is not what you were advised when you inquired on multiple occasions in regards to your desire to purchase the phone at full retail price.
I am sorry if this was not the news you were hoping for when you reached out to us on the forum. I hope that in the future you will give us the opportunity to provide you with a better experience, and that this particular experience has not influenced your future shopping destination.
If you should have any questions, please let me know.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

How to use acrobat viewer for java enabled platform

i want to use any api which can generate automatically pdf files and whose control goes through the java program.
i found that adobe is providing one zip file(acrobat viewer) for it.it contains some class files.but i dont know how to use it.
can anybody help me?
or if u can suggest any free api for this purpose?
its urgent.i'll be thankful 2 u.

http://forum.java.sun.com/thread.jspa?forumID=31&threadID=792789

How to use "Mail Merge for Word" to include only Account fields?

We're attempting to use the Mail Merge for Word template to create a document containing several fields from the Account object. We do not need any fields from the Contact object, and there are many contacts linked to each account.
When choosing "Get On Demand Data > Accounts", removing all the [Contacts] fields, selecting the necessary [Accounts] fields, then clicking "OK", a "List Download in Progress" window appears, followed by one that says "Microsoft Word - Subscript out of range". None of the [Accounts] fields are available in the downloaded data.
Can anyone tell me how to include the appropriate Account fields without any Contact fields (which pulls a separate Merge record for every Contact linked with the selected Account)?
Thanks.

Thanks for trying to help with this.
So far, we've been unable to pull even a SINGLE account record. So the problem is not related to data volume limitations. The tool seems to require that Contacts are selected, but for this application we only want a single merge document per Account.
If anyone else has had success using the Mail Merge for Word tool to pull only Account data, please give us your guidance. Thanks.

Web Template Using Global View for Hierarchy Level Display Only

Similar Messages

Maybe you are looking for