Webcache process in a strange status

Hi,
Here is my problem.
config :
RHEL 2.4.9
32-bit Intel
oracle AS 10.1.2.0.2
when I issue :
$ opmnctl startall
Error
--> Process (pid=15193)
time out while waiting for a managed process to restart
Log:
.../opmn/logs/WebCache~WebCache~1
$ opmnctl status
----------------------------------------------------------------+------------
ias-component | process-type | pid | status
----------------------------------------------------------------+------------
WebCache WebCache 15193 Stop
WebCache WebCacheAdmin 15682 Stop
My process are alive but in a "Stop" Status.
My Webcache works (We can reach My Portal)
But I can't start neither stop my WebCache without errors.
When stopping it,I must also kill -9 the pid.
Is Anybody inspired ?
thanks
marc

Lokok at this :
Oracle Application Server Web Cache 10g (10.1.2)
Copyright (c) 1999, 2005, Oracle. All rights reserved.
07/07/26 10:45:05 Stop process
Web Cache admin server is already down.
07/07/26 10:46:07 Stop process
Web Cache admin server is already down.
07/07/26 10:47:09 Stop process
Web Cache admin server is already down.
07/07/26 10:48:11 Stop process
Web Cache admin server is already down.
07/07/26 10:49:13 Stop process
Web Cache admin server is already down.
As you can see, opmn can't stop the process because it's already down.
(but I've got a process id and webcache runs)

Similar Messages

  • Table for process order &Selection profile status  details -reg

    Hi ,
    From which tabel we can get the link between the process order and selection status profile (like SAP001 etc..
    When we input the process orders we should get the selection status profiel linked to it
    Regards,
    Madhu Kiran

    Hi,
    The tables JEST and JSTO  are related to status profile .
    What i need is of Selection Profile
    You can see this field in COOIS or COOISPI  just above the Sys Status field
    We need this urgently
    Can any one help ?
    Madhu Kiran

  • Process Chain in "Undefined Status"

    I have a custom Process Type (ABAP with a return code) that runs in a chain.  The ABAP decides if a day is Monday, Tuesday, etc.
    If it is not a particular day, it errors out, per the code below.
    However, the chain variant is in an "Undefined" status, rather than a "Canceled" status.  This means that the chain is still active.  Every time I review the chain, I get a message saying "Status change of process zz_monday.  Save status and trigger events if appropriate".  Only upon clicking "yes" does the variant go to a canceled status.
    How can I force the chain to a canceled status without user interaction?
      IF g_subrc <> 0.
        MESSAGE e162(00) WITH 'Status' 'Red'.
      ELSE.
        MESSAGE i162(00) WITH 'Status' 'Green'.
      ENDIF.

    Hi John,
    See this Blog from Siggi.
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    Hope this will help you.
    Thanks
    Ck

  • Create APG ( approval granted) status in process order through user status

    Dear Gurus,
    My business requirement is to create APG ( approval granted) sytem status in process order through user status functionality, if possible.
    This needs to be activated while creating process order itself. Any help is greatly appreciated.
    Warm Regards,
    Satish

    As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
    I'll post his information here for all to see.  Hope you find it helpful.
    From: Joe
    Yes we managed to do it.
    After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
    Best Regards
    Joe

  • Queues, not processed automatically they are status Ready

    Hi Experts ,
    Queues in outbound(smq2), not processed automatically they are status Ready from long time, RFC is working fine
    i tried to process maually one by one ,but they are many.
    how can i execute this , need your inputs.
    thanks in advance
    vamsi

    Check that the scheduler is running in SMQR
    Read,
    http://help.sap.com/saphelp_nw04s/Helpdata/EN/e4/df5f3c8dde1c67e10000000a114084/content.htm
    Regards
    Juan

  • Strange status of DMVPN HUB

    Hi all,
    I have 2 DMVPN HUBs and 20 spokes and on one of these have strange status of DMVPN - NHRP (what does it mean? i didn't find explanation what that status is bad or good, is it mean that spoke could'n get NBMA address of HUB through NHRP?). Could anyone explain what does it mean?
    #show dmvpn
    Interface: Tunnel4, IPv4 NHRP Details
    Type:Spoke, NHRP Peers:2,
    # Ent  Peer NBMA Addr Peer Tunnel Add State  UpDn Tm Attrb
         1        7.#.#.3        10.5.5.1    UP    1d18h     S
         1        7.#.#.4        10.5.5.2  NHRP    1d18h     S
    Spoke's configuration.
    interface Tunnel4
     bandwidth 15000
     ip address 10.5.5.20 255.255.255.0
     no ip redirects
     ip mtu 1416
     ip nhrp map multicast dynamic
     ip nhrp map multicast 7.#.#.3
     ip nhrp map multicast 7.#.#.4
     ip nhrp map 10.5.5.1 7.#.#.3
     ip nhrp map 10.5.5.2 7.#.#.4
     ip nhrp network-id 101
     ip nhrp nhs 10.5.5.1
     ip nhrp nhs 10.5.5.2
     zone-member security outside
     ip tcp adjust-mss 1380
     delay 100
     keepalive 10 3
     tunnel source GigabitEthernet0/2
     tunnel mode gre multipoint
     tunnel key 111000
     tunnel protection ipsec profile dmvpn

    Marcin,
    thank you again for quick reply)
    It very strange because i follow yours tshooting steps and what i got bellow:
    1.Spoke can ping NBMA address of two HUBs
    2. Every HUB can reach NBMA address of spoke
    3. I switch on debuging on spoke and HUBs and I see request packet of NHRP to every HUBs
    Debug on spoke:
    000332: May 23 10:47:53.408 MSK: NHRP: Attempting to send packet via DEST 10.5.5.1
    000333: May 23 10:47:53.408 MSK: NHRP: NHRP successfully resolved 10.5.5.1 to NBMA 7.#.#.3
    000334: May 23 10:47:53.408 MSK: NHRP: Encapsulation succeeded.  Tunnel IP addr 7.#.#.3
    000335: May 23 10:47:53.408 MSK: NHRP: Send Registration Request via Tunnel4 vrf 0, packet size: 92
    000336: May 23 10:47:53.408 MSK:       src: 10.5.5.20, dst: 10.5.5.1
    000337: May 23 10:47:53.408 MSK: NHRP: 120 bytes out Tunnel4 
    000338: May 23 10:47:53.408 MSK: NHRP: Resetting retransmit due to hold-timer for 10.5.5.1
    000339: May 23 10:47:53.408 MSK: NHRP: Attempting to send packet via DEST 10.5.5.2
    000340: May 23 10:47:53.408 MSK: NHRP: NHRP successfully resolved 10.5.5.2 to NBMA 7.#.#.4
    000341: May 23 10:47:53.408 MSK: NHRP: Encapsulation succeeded.  Tunnel IP addr 7.#.#.4
    000342: May 23 10:47:53.408 MSK: NHRP: Send Registration Request via Tunnel4 vrf 0, packet size: 92
    000343: May 23 10:47:53.408 MSK:       src: 10.5.5.20, dst: 10.5.5.2
    000344: May 23 10:47:53.408 MSK: NHRP: 120 bytes out Tunnel4 
    000345: May 23 10:47:53.408 MSK: NHRP: Resetting retransmit due to hold-timer for 10.5.5.2
    000346: May 23 10:47:53.412 MSK: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel4, changed state to up
    000347: May 23 10:47:53.412 MSK: NHRP: Receive Registration Reply via Tunnel4 vrf 0, packet size: 112
    000348: May 23 10:47:53.412 MSK: NHRP: netid_in = 0, to_us = 1
    000349: May 23 10:47:53.412 MSK: NHRP: NHS 10.5.5.1 Tunnel4 vrf 0 Cluster 0 Priority 0 Transitioned to 'RE' from 'E' 
    000350: May 23 10:47:53.412 MSK: NHRP: NHS-UP: 10.5.5.1
    000351: May 23 10:47:54.920 MSK: NHRP: Setting retrans delay to 4 for nhs  dst 10.5.5.2
    000352: May 23 10:47:54.920 MSK: NHRP: Attempting to send packet via DEST 10.5.5.2 
    000353: May 23 10:47:54.920 MSK: NHRP: NHRP successfully resolved 10.5.5.2 to NBMA 7.#.#.4
    000354: May 23 10:47:54.920 MSK: NHRP: Encapsulation succeeded.  Tunnel IP addr 7.#.#.4
    000355: May 23 10:47:54.920 MSK: NHRP: Send Registration Request via Tunnel4 vrf 0, packet size: 92
    000356: May 23 10:47:54.920 MSK:       src: 10.5.5.20, dst: 10.5.5.2
    and i don't see any logs related of this spoke on second HUB!
    So... NHRP packet loss on the way to second HUB,but i can't guess about reason why is happend

  • Network printer error: the 'ipp' process stopped unexpectedly with status 1

    i have [3] macs connected to my studio airport extreme network. i have a powerbook G4, with our plotter and epson photo R1800 connected to it. my mac book pro can print to the epson just fine, but my primary workstation [G5] will not print to it. i get an error message "the 'ipp' process stopped unexpectedly with status 1". please help, i need to print.
    - all printers are excessable and work via the airport network
    - the printer is available in the shared printer list [duh]
    - as stated above the printer connection trys to open than shuts down, over and over.
    - the epson use to be connected directly to the G5 and worked fine, the G4 as the proper driver and can print files fine.

    You might try checking the Console log (in Utilities/Console) and look to see if you have this error:
    Dec 19 00:22:33 PowerBook crashdump[367]: PrintJobMgr crashed
    Dec 19 00:22:33 PowerBook crashdump[367]: crash report written to: /Library/Logs/CrashReporter/PrintJobMgr.crash.log
    You can also look in the above referenced /Library/Logs/CrashReporter/PrintJobMgr.crash.log file for any Exception for the PrintJobMgr process.
    This currently seems to only affect PPC but not Intel processors. Is this the same for your case?
    Message was edited by: kae

  • OIM DB query to retrive data from process form based on status

    Hi
    We have a requirement to retrieve the field values from process form for the status which is "provisioning".
    Can anyone help us providing the query for the same ?
    Consider some process form has Firstname, Lastname and so on as its attibutes. Resource provisioning is stuck due to some reason and the status is in 'Provisioning' state.
    Our query should return those process form attribute values.
    Thanks
    DK
    Edited by: 875142 on Apr 26, 2012 6:34 AM

    Hint:
    Make use of ORC, Process Form, OST, OIU Tables.
    Try by yourself. Don't expect readymade solution else you won't learn anything.

  • Run status is still "processing" but the distribution status is "posted"

    Hi all,
    We have run a process yesterday.
    The process' run status is still "processing" but the distribution status is changed to "posted". what could be the reason for this? i have never seen such thing in process monitor.
    Please help me.
    Thank you,
    Bye.

    And does the report posted and accessible from the monitor ?
    Peopletools version ? OS ? Database ?
    Did you try to refresh the page (not through the refresh button but with your web browser) ?
    Did you try to disconnect and reconnect ?
    Nicolas.

  • Strange status icon

    A strange icon showed up in my status bar on my iPhone 4s. I've looked all over the place but I can't find it listed on any of the normal iPhone icon lists. It looks like a green bar with a grey dot on top (see pic below.)
    [IMG]http://img.photobucket.com/albums/v727/IVStudios/Photos%20and%20screen%20shots/i Phone-icon.png[/IMG]
    I noticed it seemed to appear in conjunction with Siri saying she was unable to process a request, though that may just be a coincidence.

    It shows the battery level of a supported paired Bluetooth device.  Have a look at the user guide, page 13. http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Process chain in Yellow status

    Hi All,
    We have a strange situation.
    We are having a meta chain with 2 local chains.all the steps in the local chain completed successfully. But the local chain status is in yellow, thats the reason the below local chain has not started.This is happening from 2 days.
    We are in BI7 and in Patch 18.
    Please suggest on this.
    Thanks in advance

    Hi JS,
    once check the infopackages, DTPs and other process steps are activated or not. if not, activated all those steps.
    this will resolve your problem.
    help full  link:
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID0205146750DB01963979007127950697End?blog=/pub/wlg/8284
    Regards,
    Suman

  • Dialog work process in stop gui status

    Hi,
    there are lots of dialog work process are stuck status due to stop gui error.
    stop gui work process are not getting released automatic from the system due to this many users are facing problem and they are getting sap slow problem.
    to resolve the issue we have to kill the work process manually from the system by using tcode sm66.
    kindly help to resolve the issue.
    Regards,
    Koushal Solanki

    Hi,
    kindly find the log below
    M  *** WARNING => ThAdXDelUser: delete T149
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    C
    C Wed May 19 09:01:40 2010
    C  build_stmt: reallocating stmt buffer: 2304 -> 3312 characters
    C  build_stmt: reallocating stmt buffer: 3312 -> 4328 characters
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    C  build_stmt: reallocating stmt buffer: 2816 -> 3822 characters
    C  build_stmt: reallocating stmt buffer: 3822 -> 4823 characters
    C  build_stmt: reallocating stmt buffer: 512 -> 2000 characters
    C  build_stmt: reallocating stmt buffer: 2048 -> 3050 characters
    C  build_stmt: reallocating stmt buffer: 3050 -> 4052 characters
    M
    M Wed May 19 09:01:42 2010
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    M
    M Wed May 19 09:01:57 2010
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    M
    M Wed May 19 09:04:46 2010
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    B  ***LOG BY4=> sql error 60     performing SEL on table NRIV       [dbtran#4 @ 7588] [dbtran  7588 ]
    B  ***LOG BY0=> ORA-00060: deadlock detected while waiting for resource [dbtran#4 @ 7588] [dbtran  7588 ]
    B  dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
    B   RSLT: {dbsl=99, tran=1}
    B   FHDR: {tab='NRIV', fcode=33, mode=2, bpb=0, dbcnt=0, crsr=1,
    B          hold=0, keep=1, xfer=0, pkg=0, upto=0, init:b=0,
    B          init:p=(nil), init:#=172, wa:p=0xc0000004440b6120, wa:#=172}
    B  dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
    M Wed May 19 08:57:25 2010
    M  *** ERROR => ThCheckEmState: no em context for T2/M0 [thxxmem.c    381]
    C
    C Wed May 19 08:58:57 2010
    C     OCIStmtExecute() failed with -1=OCI_ERROR
    C     SQL error 60:
    C  *** ERROR => Error 60 in stmt_fetch() from oci_execute_stmt(), orpc=0
    [dbsloci.c    12990]
    C  *** ERROR => ORA-60 occurred when executing SQL stmt (parse error offset=0)
    [dbsloci.c    13011]
    dispatcher log
    Wed May 19 15:13:43 2010
    ERROR => DpWPCheck: max_hold_time W2 exceeded (T140=msb85       ) [dpxxdisp.c   15928]
    ERROR => DpTmRetErr: DpTmSend [dpxxdisp.c   13138]

  • Job to process messages in Ready Status in SMQ2 ECC

    Hello friends,
    I am sending out messages from SAP ECC to PI  using proxy . The messages are getting stuck in SMQ2 in READY status. I have to each time manually go and activate the queue to send the message out of SAP ECC.
    Is there any job to process them automatically that needs to be set up in SAP ECC ?
    Thank you,
    Teresa

    Hi,
    Investigate why messages were strucked in Queues, there could be some reason, i suggest you too deregister and register queues once again.
    if possible assign sepprate queue for proxy interface.
    Regards,
    Raj

  • Oracle Application Server-Unable to start "WebCache" process.

    Hello,
    Using "Oracle Application Server" 10g. Right Now, I am getting below error while starting oracle application server by using below commands.
    ./opmnctl startall ( To start entire oracle service modules)
    ./opmnctl startproc process-type=WebCache
    Both commands giving below error.
    ./opmnctl startproc process-type=WebCache
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=warlock3:6200
    0 of 1 processes started.
    ias-instance id=ias_admin.warlock3
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
    Error
    --> Process (pid=250340)
    failed to start a managed process after the maximum retry limit
    Log:
    /oracle/ora10gas/opmn/logs/WebCache~WebCache~1
    Also, WebCache event log is showing below message.
    [28/Sep/2010:13:23:30 -0530] [notification 9610] [ecid: -] The server is exiting.
    [28/Sep/2010:13:23:30 -0530] [alert 9000] [ecid: -] Process 250338 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
    [28/Sep/2010:13:23:32 -0530] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
    [28/Sep/2010:13:23:32 -0530] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
    [28/Sep/2010:13:23:32 -0530] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
    [28/Sep/2010:13:23:32 -0530] [alert 13305] [ecid: -] Failed to assign port 7777: Address already in use
    [28/Sep/2010:13:23:32 -0530] [alert 9707] [ecid: -] Failed to start the server.
    [28/Sep/2010:13:23:32 -0530] [alert 9609] [ecid: -] The server process could not initialize.
    [28/Sep/2010:13:23:32 -0530] [notification 9610] [ecid: -] The server is exiting.
    [28/Sep/2010:13:23:32 -0530] [alert 9000] [ecid: -] Process 250340 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
    Kindly let me know how to solve this issue.
    Regards,
    Nishith N.Vyas.

    Hi,
    I have not experience with Oracle Names resolution, but did you start the server "NAMESCTL> START" ? (I'm not sure)
    On the client, the SQLNET.ORA file contains an entry that lists onames first in the NAMES.DIRECTORY_PATH parameter ?
    e.g.: NAMES.DIRECTORY_PATH=(onames, tnsnames, hostname)
    There are some messages on the listener.log file ?
    Cheers

  • Business Process Engine in yellow status

    Hi all,
    I visit the site http://<hostname>:<port>/rep/start/index.jsp and visit the runtime workbench link. Displaying all in the component monitoring, i saw that the business process engine under Integration Server is in yellow status. I checked the details and found out there are three background jobs that weren't schedule. But i dont know the specifics of these background jobs. It says in the details
    -schedule background job for missed deadlines
    -schedule background job for worked items with errors and
    -schedule background job for deadline monitoring
    I hope you can give me a detailed procedure in scheduling these jobs.
    Warm Regards,
    Charm

    Hi,
    these jobs are to run to ensure that the approvers of the documents are informed about thier pending workitems which need to be approved.
    you can use the transaction 'SM36' for scheduling the jobs, you can find number of jobs which might already be scheduled in your system .
    for example
    jobs for 1 ) CLEAN_REQREQ_UP
               2) BBP_GET_STATUS_2

Maybe you are looking for

  • Bluetooth A2DP problem

    I have been using Arch for a few years but I recently had to put Ubuntu on one of my computers because I bought some bluetooth speakers or headset as it is more commonly recognized by software.  I googled around and found that I need to put 'Enable=S

  • How to reduce delay caused by coding?

    Hi, I am fairly new to C++ programming and using DAQ boards. I've been browsing this board for awhile and let me first thank everyone who has contributed - most threads were very helpful. However this problem I have right now didn't come up in any se

  • Question About Bex wad portfolio chart design

    hi, user wants to compare sales and cost value and see where the department is. ie user want to see sales as Xaxis and cost as Yaxis and department has bubbles in portfolio graph . but when i use this graph i am unable to assign the values to axis an

  • Certain apps ARE running in background / while iphone is in standby

    Well after some quick searching all I see are people asking how they can get 3rd party apps to run "in the background". I assume that when people are saying "background" they mean (for example) opening up Instant Messanger, starting a conversation, p

  • KEAT REPORT

    Hello, I have post one Billing document from VF01. After that when I am taking report from KEAT, I am having difference in 'Delta CO-PA/SD' Can any one please help me out why the difference is coming and what I have to do? Thanks