Webcache reports 'Connect failed errno = 146' in Event Log

Hi, when checking the webcache event log I keep getting the above message.
The webcache server and the application server are physically separate boxes on the same network. There is a firewall between them.
The webcache server runs purely webcache, the application server runs HTTP Server and OC4J. The connection from webcache to the application server is usually available but sometimes there is a timeout - which I'm assuming is related to the above.
I understand that a 146 error is a socket connection error.
Does anyone have any ideas on why I'm seeing this message and where I should start looking to sort it out ?
Thanks,
Paul.

You said "There is a firewall between them.".
That is probably the key issue here. Can you tell us what exactly is the firewall device. Is it transparent like some layer 3 or below device? With the given info, it is too wild to speculate what caused the connection failure. The problem is usually not in the application process running on the end system.

Similar Messages

IDM Demo always reports connection failed for Solaris target

I'm setting up the IDM Demo, using the Setup Wizard, using a Solaris 10 container as
the target system. For this demo, I'm using telnet directly as root, which seems to be
the only method available. This succeeds when I run telnet by hand from the IDM host
to the target host. When I test the connection from the wizard, after a long delay, it
always reports that the test connection failed. However, the console log on the target
system shows a successful login. The Details button says that it was looking for `_.)#+(:',
regardless of what I specify as the `Login Prompt'. (I assume this really means the shell
prompt.) I've tried changing the shell prompt by setting PS1 in /.profile and tried suppressing
the banner by creating a /.hushlogin file. Still, the test button always reports that the
connection failed. What's wrong here?

ah, familiar territory :)
the string _.)#+(: is something that the adapter uses as a suffix to check whether the previous command executed has changed state or not. The assumption being that _.)#+(: will not be encountered as output of any command on Solaris.
1. Try connecting as root
2. Whats your IDM version?
3. Try this: login as root over putty, and paste whatever strings you get into the adapter configuration page on IM (for say, prompt, etc.)
4. Tracing the following variables can give you better details regarding where its getting stuck:
com.waveset.adapter.SolarisResourceAdapter
com.waveset.adapter.SVIDResourceAdapter
com.waveset.adapter.ScriptedConnection
Hope this helps!
Ankush

SAP Management Console reporting connection failed

When using Internet Explorer to access SAP Mangement Console @ http://spjcen00:50013 , one instance reporting connection failed. I am loading a landscape export file containing 10 distincts SIDs. Only this one is failing and started about 10 days ago. The usage type of the failing system is Enterprise Portal. My feeling is there is some configuration that has changed for Solution Manager enablement.
Client Side:
Java Plug-in 1.6.0_15
Using JRE version 1.6.0_15-b03 Java HotSpot(TM) Client VM
SID:NW 7.01 Ehp1 on AIX/DB2 usage type Enterpise Portal
Clicking on the operations log in the SAP MC, (lower right corner) reveals this information:
Mon Aug 17 13:31:16 CDT 2009 Connection to instance spjcen00 10 failed/Connection refused Connection refused: connect
With Details of:
java.net.ConnectException: Connection refused: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(Unknown Source)
 at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
 at java.net.PlainSocketImpl.connect(Unknown Source)
 at java.net.SocksSocketImpl.connect(Unknown Source)
 at java.net.Socket.connect(Unknown Source)
 at java.net.Socket.connect(Unknown Source)
 at java.net.Socket.<init>(Unknown Source)
 at java.net.Socket.<init>(Unknown Source)
 at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initStreamsFromSocket(HTTPSocket.java:648)
 at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initializeStreams(HTTPSocket.java:470)
 at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getOutputStream(HTTPSocket.java:427)
 at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:355)
 at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:550)
 at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1432)
 at com.sap.managementconsole.soap.sap.sapcontrol.SAPControlStub.getInstanceProperties(SAPControlStub.java:1167)
 at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.getInstanceProperties(SAPSOAPDataLoader.java:1095)
 at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.init(SAPSOAPDataLoader.java:87)
 at com.sap.managementconsole.common.DataLoader.createControlInterface(DataLoader.java:381)
 at com.sap.managementconsole.common.DataLoader.startup(DataLoader.java:289)
 at com.sap.managementconsole.common.DataLoader.access$200(DataLoader.java:72)
 at com.sap.managementconsole.common.DataLoader$2.execute(DataLoader.java:513)
 at com.sap.managementconsole.operations.AuthorizedOperation.execute(AuthorizedOperation.java:52)
 at com.sap.managementconsole.common.DataLoader.reinitialize(DataLoader.java:520)
 at com.sap.managementconsole.common.ThreadPoolDataLoader$2.execute(ThreadPoolDataLoader.java:102)
 at com.sap.managementconsole.common.DataLoader.executeAllQueuedOperations(DataLoader.java:606)
 at com.sap.managementconsole.common.ThreadPoolDataLoader$DataLoaderTask.execute(ThreadPoolDataLoader.java:127)
 at com.sap.managementconsole.common.ThreadPoolManager$ThreadPoolElement.run(ThreadPoolManager.java:276)
 at java.lang.Thread.run(Unknown Source)

Hi Christophe,
Which user did you use in the SAP MMC in order to start the server? It should be the Windows user under which the server has been installed, not the Administrator user for the server.
Hope that helps!
-Vladimir

I keep getting connection failed when i try and log in, I keep getting connection failed when i try and log in

I keep getting connection failed when i try and log in, I keep getting connection failed when i try and log in

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Connection Timeout Expired in Windows Event Logs

I just recently installed SharePoint 2013 SP1 on a Windows Server 2008 R2 SP1 server and have been receiving this error message in the Windows Event logs:
Cannot connect to SQL Server. <database server name> not found. Additional error information from SQL Server is included below.
Connection Timeout Expired. The timeout period elapsed during the post-login phase. The connection could have timed out while waiting for server to complete the login process and respond; Or it could have timed out while attempting to create
multiple active connections. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=12; handshake=6; [Login] initialization=0; authentication=0; [Post-Login] complete=14000;
I have never seen this error message before in my life on any prior installation of SharePoint that I have ever done. It is only occurring on this one particular installation of SharePoint. The environment is corporate built, so I have no idea
as to how to troubleshoot or determine the root cause of this error message.
I looked at the value of the database-connection-timeout in stsadm and it gets back a value of 15, however, I am unable to alter the database connection timeout using stsadm since I either get an "Object reference not sent to an instance of an object"
error message or "This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint
Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products."
Please advise.

What is specification of your SQL server? i think its more CPU, RAM, I/O issue with SQL server.
under which account you are running the stsadm command?
check this one
http://stackoverflow.com/questions/21230927/sql-azure-the-timeout-period-elapsed-during-the-post-login-phase
may be you fall in this bug
http://connect.microsoft.com/VisualStudio/feedback/details/821803/connection-timeout-expired-the-timeout-period-elapsed-during-the-post-login-phase
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Create Project Web App Site - Failed - see the Application event Log

Hi, we have installed MS Project Server 2010 on our LAB SharePoint 2010 Server (Single Server and SQL Server Database).
My farm admin account have all server roles in SQL, it is runng the OWSTimer also and it is the AppPool Service App.
No specific error in the Application log from eventvwr on SharePoint Server.
No specific error log from SQL
This is the log information from SharePoint ULS :
04/09/2015 10:56:47.01 OWSTIMER.EXE (0x1464) 0x0728 Project Server Provisioning 6935 Critical Error provisioning database. Script: C:\Program Files\Microsoft Office Servers\14.0\Sql\Project Server\Core\addpublishsps12.sql,
Line: 0, Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: TCP Provider, error: 0 - An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.), Line: grant execute on dbo.MSP_RESTORE_WEB_SECURITY_SP_CAT_PERMISSIONS to ProjectServerRole
. 5141bd37-50f2-495c-bcd6-d0804f08e3f0
04/09/2015 10:56:47.01 OWSTIMER.EXE (0x1464) 0x0728 Project Server Provisioning 6580 Critical Failed to provision database LAV-SP2010LAB-SQL.ProjectServer_Published as Published because of exception grant execute on dbo.MSP_RESTORE_WEB_SECURITY_SP_CAT_PERMISSIONS
to ProjectServerRole . 5141bd37-50f2-495c-bcd6-d0804f08e3f0
04/09/2015 10:56:47.01 OWSTIMER.EXE (0x1464) 0x0728 Project Server Provisioning 6993 Critical Provisioning 'PWA': Failed to provision databases. An exception occurred: grant execute on dbo.MSP_RESTORE_WEB_SECURITY_SP_CAT_PERMISSIONS
to ProjectServerRole . 5141bd37-50f2-495c-bcd6-d0804f08e3f0
04/09/2015 10:56:47.01 OWSTIMER.EXE (0x1464) 0x0728 Project Server Provisioning 6958 Critical Provisioning 'PWA': Database provisioning failed. 5141bd37-50f2-495c-bcd6-d0804f08e3f0
04/09/2015 10:56:47.01 OWSTIMER.EXE (0x1464) 0x0728 Project Server Provisioning 6971 Critical Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision
databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: grant execute on dbo.MSP_RESTORE_WEB_SECURITY_SP_CAT_PERMISSIONS to ProjectServerRole ---> System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - An operation
on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.)     at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire,
Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout,
Int64 timerExpire, SqlConnection owningObject)     at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions,
Int64 timerStart)     at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()     at Microsoft.Office.Project.Server.Data.SqlSession.OpenConnection()     at Microsoft.Office.Project.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand command)
at Microsoft.Office.Project.Server.Administration.ProjectDatabase.ExecuteScript(SqlSession session, TextReader textReader, Int32 commandTimeout)     --- End of inner exception stack trace ---     at Microsoft.Office.Project.Server.Administration.ProjectDatabase.ExecuteScript(SqlSession
session, TextReader textReader, Int32 commandTimeout)     at Microsoft.Office.Project.Server.Administration.ProjectDatabase.ExecuteScript(SqlSession session, String path, Int32 commandTimeout)     at Microsoft.Office.Project.Server.Administration.ProjectDatabase.Provision(ProjectDatabaseType
databaseType, PjSqlConnectionString databaseConnectString, String installpath, Int32 lcid)     at Microsoft.Office.Project.Server.Administration.ProjectDatabase.Provision(PjSqlConnectionString databaseConnectString, Int32 lcid, ProjectDatabaseType
databaseType, Guid collectionGuid)     at Microsoft.Office.Project.Server.Administration.ProjectSite.ProvisionDatabases(String pubConn, String wrkConn, String verConn, String repConn, String adminUsername, String adminName, String adminEmail,
Int32 lcid, Guid collectionGuid)     at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType&
originalDatabaseState, Guid& adminGuid)     --- End of inner exception stack trace ---     at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset,
SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)     at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings
provset) 5141bd37-50f2-495c-bcd6-d0804f08e3f0
Social Technet Microsoft.

We have found the problem. The organisation was asking us to reduce the number of Dynamic TCP Port.
Our setup was only 3,975
Netsh Int IPv4 Show Dyn TCP
Protocol tcp Dynamic Port Range
Start Port      : 1025
Number of Ports : 3975
We have use this command to raise the number of port available to 60,000
netsh int ipv4 set dyn tcp start=1025 num=60000
Everything is working now.
Social Technet Microsoft.

Remote desktop fails, can still connect to event log and services.

I am unable for some reason to remote into a machine that I've been able to before. This occurred after it installed automatic updates. At the moment I can connect to
services and the event log from another machine with the same credentials, but I can't log onto the machine itself. Is there any way to reset this info or such. This machine is a part of a domain and can read credentials from the domain controller.
I also do know that remote desktop is enabled.
The following error occurs in the even log on the affected machine.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2013-03-21 10:28:23 AM
Event ID: 5061
Task Category: System Integrity
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ****
Description:
Cryptographic operation.
Subject:
 Security ID: SYSTEM
 Account Name: ****$
 Account Domain: *******
 Logon ID: 0x3e7
Cryptographic Parameters:
 Provider Name: Microsoft Software Key Storage Provider
 Algorithm Name: RSA
 Key Name: TSSecKeySet1
 Key Type: Machine key.
Cryptographic Operation:
 Operation: Decrypt.
 Return Code: 0xc000000d
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
 <EventID>5061</EventID>
 <Version>0</Version>
 <Level>0</Level>
 <Task>12290</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8010000000000000</Keywords>
 <TimeCreated SystemTime="2013-03-21T14:28:23.339874500Z" />
 <EventRecordID>937125</EventRecordID>
 <Correlation />
 <Execution ProcessID="500" ThreadID="548" />
 <Channel>Security</Channel>
 <Computer>**********</Computer>
 <Security />
</System>
<EventData>
 <Data Name="SubjectUserSid">S-1-5-18</Data>
 <Data Name="SubjectUserName">*******$</Data>
 <Data Name="SubjectDomainName">********</Data>
 <Data Name="SubjectLogonId">0x3e7</Data>
 <Data Name="ProviderName">Microsoft Software Key Storage Provider</Data>
 <Data Name="AlgorithmName">RSA</Data>
 <Data Name="KeyName">TSSecKeySet1</Data>
 <Data Name="KeyType">%%2499</Data>
 <Data Name="Operation">%%2484</Data>
 <Data Name="ReturnCode">0xc000000d</Data>
</EventData>
</Event>

Hi,
The following methods could be used to resolve some of the most common problems.
Potential issues that may be seen:
1.) Remote Desktop endpoint is missing
Each virtual machine that is created should have a remote desktop endpoint for the VM at port 3389. If this endpoint is deleted then a new endpoint must be created. The public port can be any available port number. The private port (the port on the VM) must
be 3389.
2.) RDP fails with error: "The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support."
RDP connection may fail when there are cached credentials. Please see the following article to resolve this problem:
http://www.c-sharpcorner.com/uploadfile/ae35ca/windows-azure-fixing-reconnect-remote-desktop-error-the-specified-user-name-does-not-exist-verif/
3.) Failure to connect to uploaded VHD
When a VHD is uploaded to Windows Azure you must make sure that Remote Desktop is enabled on the VHD and an apporopriate firewall rule is enabled on the VM to open port 3389 (Remote Desktop port).
Hope this helps!
Regards.
Vivian Wang
TechNet Community Support

Connect failed with DBLI_RC_LOAD_LIB_FAILED error

Hi,
I am trying to install an application server in a windows /sql environment.
The CI ,database and the new application server are all on different hosts.
The application server gets installed but doe snot start up.
We get the following error "2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED"
in r3trans log.
Please guide.
Regards,
Rajiv

it is a windows/sql machine
Here is the r3trans-d log
This is r3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
dev_w0 log
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 18 05:02:41 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\HP1\D01\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\HP1\D01\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\HP1\D01\exe\dbmssslib.dll' is "700.08", patchlevel (0.182)
B New connection 0 created
M sysno 01
M sid HP1
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4544
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4544) [dpxxdisp.c 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Feb 18 05:02:42 2010
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000116B0050, size: 6607008)
M DpShMCreate: allocated sys_adm at 00000000116B0050
M DpShMCreate: allocated wp_adm at 00000000116B21F0
M DpShMCreate: allocated tm_adm_list at 00000000116B7AF0
M DpShMCreate: allocated tm_adm at 00000000116B7B50
M DpShMCreate: allocated wp_ca_adm at 0000000011C5B3D0
M DpShMCreate: allocated appc_ca_adm at 0000000011C611D0
M DpShMCreate: allocated comm_adm at 0000000011C63110
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000011CE9DA0
M DpShMCreate: allocated gw_adm at 0000000011CE9E20
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000011CE9E50
M DpShMCreate: allocated wall_adm at 0000000011CE9E60
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: running on host sap1a38
M
M Thu Feb 18 05:02:43 2010
M calling db_connect ...
C Thread ID:4572
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\HP1\D01\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 182
C patchcomment MSSQL: COPYTOSHADOW, R3trans loses reports (1260968)
C Network connection used from SAP1A38 to SAP1A12\D1 using tcp:SAP1A12\D1
C CopyLocalParameters: dbuser is 'hp1'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.2047.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 500 dynamic statements (2876000 bytes), total 35836104 bytes
C Using shared procedure name cache SAP1A12_D1_HP1HP1_HP1_MEM initialized by another process.
C Connected to db server : [SAP1A12\D1] server_used : [tcp:SAP1A12\D1], dbname: HP1, dbuser: hp1
C pn_id:SAP1A12_D1_HP1HP1_HP1
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100218 050243 SAP1A12\D1
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Thu Feb 18 05:02:46 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 000000001A0D0050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 000000001A510050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000022520050, size: 2678942)
M SHM_PAGING_ADM (addr: 00000000227B0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000022840050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 00000000228D0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 00000000229700E0, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0000000022970330, size: 320072)
B dbntab: Buffer FTAB(item array) (addr: 00000000229BE580, size: 1280000)
B dbntab: Buffer FTAB(data area) (addr: 0000000022AF6D80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 00000000248500E0, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0000000024850330, size: 320072)
B dbntab: Buffer IREC(item array) (addr: 000000002489E580, size: 320000)
B dbntab: Buffer IREC(data area) (addr: 00000000248EC780, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 0000000024ED00E0, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0000000024ED0330, size: 320072)
B dbntab: Buffer STAB(item array) (addr: 0000000024F1E580, size: 320000)
B dbntab: Buffer STAB(data area) (addr: 0000000024F6C780, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 00000000252600E0, size: 1944)
B dbntab: Buffer TTAB(anchor array) (addr: 0000000025260880, size: 320072)
B dbntab: Buffer TTAB(item array) (addr: 00000000252AEAD0, size: 800000)
B dbntab: Buffer TTAB(data area) (addr: 0000000025371FD0, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0000000025919C70)
B dbtbxbuf: Buffer TABL (addr: 0000000027F50160, size: 30000000, end: 0000000029BEC4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000029BF0160, size: 10240000, end: 000000002A5B4160)
B dbexpbuf: Buffer EIBUF (addr: 000000002A5D0170, size: 4194304, end: 000000002A9D0170)
B dbexpbuf: Buffer ESM (addr: 000000002A9E0170, size: 4194304, end: 000000002ADE0170)
B dbexpbuf: Buffer CUA (addr: 000000002ADF0170, size: 3072000, end: 000000002B0DE170)
B dbexpbuf: Buffer OTR (addr: 000000002B0E0170, size: 4194304, end: 000000002B4E0170)
B dbcalbuf: Buffer CALE (addr: 000000002B4F0050, size: 500000, end: 000000002B56A170)
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
N
N Thu Feb 18 05:02:47 2010
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=1, using 1 (Authentication Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): found snc/gssapi_lib=F:\usr\sap\HP1\DVEBMGS01\exe\gX64ntlm.dll
M *** ERROR => DlLoadLib: LoadLibrary(F:\usr\sap\HP1\DVEBMGS01\exe\gX64ntlm.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("F:\usr\sap\HP1\DVEBMGS01\exe\gX64ntlm.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) F:\usr\sap\HP1\DVEBMGS01\exe\gX64ntlm.dll not loaded
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 230]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 232]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 10524]
M
M Info for wp 0
M
M pid = 4544
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4544) [dpnttool.c 333]

"Connection Failed" - "Connect As..." button doesnt do anything

hello,
when i try to use my new MacBook Pro's Finder to connect to one my windows machines on my local network, it reports "Connection Failed".
when i try to use the "Connect As..." button, absolutely nothing happens on click. no prompt for username & password.
i can access the same exact computer perfectly from my iMac (the "Connect As..." button works there and i can enter my windows login. both are running leopard 10.5.2.
any idea whats up? according to this post, it may not be windows-related:
http://discussions.apple.com/thread.jspa?threadID=1234936
thanks!
matt

hello,
when i try to use my new MacBook Pro's Finder to connect to one my windows machines on my local network, it reports "Connection Failed".
when i try to use the "Connect As..." button, absolutely nothing happens on click. no prompt for username & password.
i can access the same exact computer perfectly from my iMac (the "Connect As..." button works there and i can enter my windows login. both are running leopard 10.5.2.
any idea whats up? according to this post, it may not be windows-related:
http://discussions.apple.com/thread.jspa?threadID=1234936
thanks!
matt

"Connection Failed" - can't access win machine

hello,
when i try to use my new MacBook Pro's Finder to connect to one my windows machines on my local network, it reports "Connection Failed".
when i try to use the "Connect As..." button, absolutely nothing happens on click. no prompt for username & password.
i can access the same exact computer perfectly from my iMac (the "Connect As..." button works there. both are running leopard 10.5.2.
any idea whats up? according to this post, its not windows-related:
http://discussions.apple.com/thread.jspa?threadID=1234936
thanks!
matt

Disable anti virus software if installed
Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

Event Log stopped working - Error 1747 : The Authentication Service is Unknown

I reccently noticed that my scheduled tasks were no longer running. I tried to bring up the task scheduler and it said the service was not running. I checked the service and sure enough, it was not running. I tried to start it and it failed because the windows event log service, which is a dependency, was also not running. I tried to start the event log service, and gave the error above in the subject line.
The event log service uses a log on of "Local Service". There are other services that use the same log on and they start up with no problem. I have searched the internet for a solution to this and have tried several things I found with no luck. One was to run SFC, another was to delete the Windows/Logs and Windows/System32/Logfiles folders so they would be re-created on startup. I also tried subinacl to reset the ACLs on registry branches and the subfolders of %SystemDrive% as recommeded in another forum.
I am running Vista Home Premium and all the latest updates have neen applied. Anyone have any further ideas? (short of re-installing Vista).
Thanks.

Hi there Robin. I am an IT Technician & felt that I needed to begin communication with you regarding this issue. I recently made a post in this thread detailing my issues & found resolution. I just wanted to share my post with you & hope that the information is useful to others that need to resolve these issues without re-installing their operating systems. Please find my post below:
Hi all. I am an IT technician & have recently been troubleshooting a customer's Windows Vista Home Premium laptop in a wireless home network.
In a nutshell the laptop suddenly stopped connecting to the wireless router; upon investigation I found lots of windows services were not starting; this sent me on a bit of a wild goose chase as this showed all signs of some kind of trojan / malware infection hogging the system. Here are some of the things I saw:
1). Norton 360 wasn't even running correctly & I was unable to view it's firewall status.
2). Windows firewall was disabled & I was unable to start it (service failed error message).
3). I was unable to view windows event logs & received "Error 1747 : The Authentication Service is Unknown"
4). Windows Side Bar was all blanked out & not showing any gadgets
5). I attempted a system restore but that failed (I saw references in system restore that the Bonjour service had been un-installed)
I did loads of further investigation & found this thread. It would appear that removing, or even trying to remove / un-install the Bonjour service may cause the above mentioned issues in windows Vista. I have not seen this kind of errata in windows XP.
I have heard of people pulling their hair out & re-installing the operating system possibly due to experiencing these issues.
Please Read On....
Resolution that worked for me:
I ran the Winsock corruption fix that is mentioned in previous threads as per microsoft's instructions found at the following URL: http://support.microsoft.com/kb/811259
Manual steps to recover from Winsock2 corruption for Windows Vista users
Winsock corruption can cause connectivity problems. To resolve this issue by using Network Diagnostics in Windows Vista, follow these steps:
1.
Click , and then click Network.
2.
Click Network and Sharing Center.
3.
In the Network and Sharing Center box, click Diagnose and Repair.
Note You may also access the Network and Sharing Center in Control Panel.
If the Network and Diagnostic tool was unable to find a problem, you can manually repair or reset Winsock.
Manual steps to repair or to reset Winsock for Windows Vista users
1.
Click , type cmd in the Start Search box, right-click cmd.exe, click Run as administrator, and then press Continue.
2.
Type netsh winsock reset at the command prompt, and then press ENTER.
Note If the command is typed incorrectly, you will receive an error message. Type the command again. When the command is completed successfully, a confirmation appears, followed by a new command prompt. Then, go to step 3.
3.
Type exit, and then press ENTER
Hey Presto!!!! After re-booting everything is back online & all necessary windows services & norton 360 are starting as normal.
Further Information on Bonjour Service:
http://en.wikipedia.org/wiki/Bonjour_(software)
As I understand & in my experience the Bonjour service is installed as a sub-aplet with certain 3rd party software applications including Apples itunes & Adobe newest Creative Suite 3 installs Apple’s Bonjour service even if you don’t install Version Cue. Its main goal is to provide zero-configuration connectivity between Version Cue server and the suite’s applications.
A bit more CSi & i've established how to un-install Bonjour service; there is a great topic on this subject at the following URL: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/
Thanks to all for your post & input...it has really helped to get this issue resolved (well for me anyway) & has of course save a re-install!!!!
I will keep an eye on this thread...please post your resolutions / experiences to help others.
Kind regards

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

Home Hub 3. Constant connectivity loss. Event log ...

Trying to get any kind of service out of my BT Infinity provision nowadays is like trying to arrange a tsunami in a desert.
Time after time after time after time, the Internet is working normally but then a page refuses to refresh and attempts to open another website result only in 'page not found' even though the Internet-connection icon is glowing steadily in the tray, and when I ask Windows to check on things, it reports that no problems have been found and the connection is working normally.
Except, of course, it isn't. I am not a technical expert and therefore haven't much of a clue where to start with this. My Vista OS runs with Panda Cloud AV and Malwarebytes PRO and Windows Firewall, all three of which have always played nicely. Prior to switching to BT Infinity, I had 'ordinary' BT broadband via a Netgear wireless router. The service was trouble-free.
This morning, I decided to delve into BT Home Hub Manager to re-set to factory default. That in itself took some doing because clicking on the Firefox bookmark got me nowhere at all: I had to sit here and wait for 10 minutes before the Hub page suddenly appeared as if out of nowhere.
I found in the event logs a seemingly unending chain of firewall related reports. Rather than read 'em all, I just hit re-set and whoa-hey, after a 5 or 6 minute wait, everything was fine and dandy again. . .
Until, 20 minutes later, it wasn't. Despite the re-set, Internet connectivity was shot to pieces. I'm on Amazon UK and click to open a new page in a new tab: Page Not Found. On the BBC News website, click on a link to open in a new tab: Page Not Found. Reload any of those exisdting, open pages and the reload circle just spins and spins until. . . Page Not Found.
Unfortunately, I can't make head nor tail of the log reports in the Firewall section, but typically they read:
IN: BLOCK [16] Remote administration
BLOCKED 1 more packet [because of Remote Administration]
IN: BLOCK [9] Packet invalid in connection
BLOCKED 4 more packets (because of Packet invalid in connection)
IN: BLOCK [9] Packet invalid in connection
BLOCKED 20 more packets (because of Packet invalid in connection)
BLOCKED 40 more packets (becuase of Packet invalid in connection)
And so it goes on. . . and on. It's not even clear to me if the Home Hub is doing the blocking anyway, but if it is, then I can't begin to figure out why websites like Amazon UK, BBC News, Speedtest and even Google Maps should be BLOCKED.
Help appreciated. . . always assuming, this post actually gets through -- I've no idea if this page has gone down or not, because though it's on-screen, that no longer means anything at all.

Thanks, Ray. Just managed to get back on here, there's been virtually no connectivity at all. One odd thing has been that the Home Hub Manager has opened OK. But it is no longer in agreement with the computer about whether or not connectivity exists. For example:
1) Click on disconnect in HH Manager, and it reports that the task has been achieved and the button changes to 'connect'.
But no disconnection has occurred. The Internet icon is still in the tray in its 'connected' state. And it's possible to go on the Net and briefly open up a website that isn't in the FF cache. But then everything fails again. Alternatively:
2) Click 'disconnect' in the tray control and the icon changes shows a bid red x. But the HH Manager doesn't agree. It continues to report that the computer is connected to the Internet.
I'm baffled and wearied. I'll have to relocate the Infinity set-up from downstairs to where this computer is; I'm assuming, I leave the modem in place (the new white flat thing the engineer brought when he installed Infinity)and just disconnect the black HH3 and brin g it upstairs and plug it into the PC?
Thanks for your help, much appreciated.

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

Webcache reports 'Connect failed errno = 146' in Event Log

Similar Messages

Maybe you are looking for