Webcam problem with Thinkpad L530 running Windows 8

Hi,
I have a L530 running windows 8. I'm trying to activate the webcam with Skype. Skype doesn't recognize the webcam. I went into the Start "page" in windows 8 and use the "Camera" win 8 app. The app displays a big camera with a diagonal line going across it, which to me meaning that the Camera app has problem using the camera.
I've gone into the controll panel/Device manager checking for Integrated Camera. The device status says "This device is working properly". The driver version is 1.0.0.19.
I'm not sure what to do. Any help is greatly appreciated. thanks.

Hi, whto
This sounds like the camera is set to Private mode, which is a security feature to block the camera from any potential hackers. To change this setting, go to the Lenovo Settings metro app and open it. There should be camera settings in here. Select the camera and make sure the camera is not set to Private.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

Problems with graphics card running windows on bootcamp..

I currently have Windows Vista 32 bit installed on my mac with bootcamp. The reason I have it installed is I want to run an MMO RPG (DDO) on my mac and it is only supported on windows.
However it will not allow me to play it as it says that no graphics device could be located (Game error 122 for those that play it)
My question is how I utilise the graphics card from the mac onto windows, as the VGA adaptor doesn't seem to be sufficient??
Either that or does anyone know of a way I can play DDO through MAC OS??
Any help much appreciated.
Thanks.

Just tried what you recommended, but still to no avail..
What's confusing me is the following;
1)When checking system performance it tells me that my graphics are as follows
Graphics - Desktop performance for Windows Aero
Gaming Graphics - 3D Buisness and Gaming graphics performance.
2)http://svc.systemrequirementslab.com explains that I cannot run the game due to my graphics being inferior (I highly doubt this).
Minimum: 64 MB video card with Hardware T&L
(NVIDIA GeForce 2+ / ATI Radeon VE+)
You Have: Standard VGA Graphics Adapter
3)Just as the game is about to boot up it gives me the following message;
[Game Error 122] No suitable graphics device was found. Are you running through a rmeote session or a VM? If not, please check your video hardware capabilities.
I'm literally 30seconds away from throwing this macbook out the window, please can anyone help?!
Thanks x

Upgaded to 4.0 now cannot open mail in my universtiy website--"problem with xul"? Running Windows 7

Upgraded to 4.0 have trouble with opening webmail account--can't turn in paper!!!!! --trouble shooting msg says something about XUL
I can either open up e-mail in basic and not read some e-mails or write e-mails https://webmail.duke.edu/atmail.php?LoginType=ajax OR can't open using advanced. https://webmail.duke.edu/parse.php?file=html/english/xul/xullogin.html&frame=1&XUL=1
How can something that worked in an earlier version no longer be supported? How can I revert to 3.6.16?

Disable Bitdefender's option to scan mail folders and see if the performance improves.

Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link.

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Native resolution problem on Boot Camp running Windows 8.1 on Macbook PRO 15 (2011)

Hello
Couple days ago I purchased a DELL U2414h display, and I came across some problems while trying to use it with Windows 8.1 on Boot Camp.
Everything works like a charm on MAC OS X and I get 1680x1050 resolution on my 2011 15 inch Macbook PRO, and 1920x1080 on the external DELL display.
The problem starts when I run Windows 8.1... I get my native resolution on the Macbook, but the maximum usable resolution on the external display is 1776x1000. There's an option to choose 1920x1080, but when I do that, the screen looks blurry. Is there any way to overcome this problem?
I'm using HDMI Adapter, and I installed all the drivers which were downloaded while installing the Boot Camp
Cheers
Patryk

No I haven't, but could it be the case? The same display with the same adapter works fine while running the MAC OS X.
But yeah, the adapter converts the mini display port to HDMI (as far as I know)
Thanks for the reply

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

[discussion moved to Using Flash Player forum]

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Webcam problem with Thinkpad L530 running Windows 8

Similar Messages

Maybe you are looking for