WebDAV: delete or rename of a folder doesn't work in XP clients

Hello!
I provide file sharing via WebDAV to some Windows XP clients.
The clients can create files and folders, but they can't rename folders (renaming files does work).
When I mount the WebDAV-Folder in MacOS, renaming folders does work perfectly. I can see a difference in the MOVE command in the apache log: MacOS sends a trailing slash, XP doesn't. This results in an error on XP.
The same behaviour is true for deleting a folder - doesn't work also.
Does anybody know a solution? Dows it worl for your setup?
Thanks & best regards,
Steve.

Thanks cor-el,
That's exactly what I've done - by accident, clearly!
Ah well, panic over...
Thanks again,
Si

Similar Messages

  • Using her PC whilst in VNC mode. Control-Alt-Delete is the request but this doesn't work. Any clues?

    Using my iMac, I'm trying to log onto another PC at a remote location whilst in VNC mode. Control-Alt-Delete is the request, but this doesn't work. Any clues??

    Thanks, great work... I think that's where I was headed!

  • Skill Search works fine from search center, but it doesn't work from Lync client

    My environment consists of Lync Server 2013 and SharePoint Server 2013.
    I configured skill search and it works fine from search center, but it doesn't work from Lync client. An error appears says"error occurred during the search, please try again".
    I configured these URLs in my client policy
    set-csclientpolicy -identity global -spsearchinternalurl http://<Sharepoint Server>/_vti_bin/search.asmx
    set-csclientpolicy -identity global -spsearchcenterinternalurl http://<Sharepoint Server>/searchcenter/pages/peopleresults.aspx
    I checked these URLs from the browser and they work fine.
    I disabled anonymous access to _vti_bin, but no change then i checked lync log but i didn't find any error then i used Wireshark and found that when Lync client contacts Sharepoint, Sharepoint responded to it with internal server error http 500
    Please advice for what to do

    Hi,
    Thanks For your sharing.
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Find files in folder doesn't work

    To make my photo galleries, I use CS5, because this is the last version that can use modified galleries that I was able to since CS3.  My modified pages have links to other pages on my web site, while the ones that now come with Photoshop are dead end with no links.
    So, another feature lost in later Bridges is the ability to show ALL the contents of a folder and its subfolders.  To get around this, I choose to show folders whose metadata or filename DO NOT contain zzz, since none do.  This has worked fine and I have made hundreds of galleries from my phylogenetic folder trees of species.
         Until I came to this gallery of Tachinidae. I have been updating all my Arthropod species galleries  After I did the usual procedure, and created the gallery (and deleted the previous gallery both on my PC and the web), I noticed that the first image was a Belvosia, and there were non of the Archytas or other species that should have come before, alphabetically.  I tried again and found that it was ignoring a lot of files in some subfolders that should have come up.  I tried other finds, like all files ending in .tif, or all that had the keyword Tachinidae, and always the same result.
         Then I tried the same search in CS6 and it finds all, but of course I can't make my galleries here,  I went back to CS5 and made a new folder TACHINIDAE 1  and moved all the files there and tried again, with no success.  I tried a backup file with the same result.  Rebooting didn't help.
         Today I tried again and as it did the search, I could see it indexing the Archytax subfolder and others that were not included, but now after  over 30 minutes, all I have is a spinning circle and no items.  I had gone back to other folders that I had made galleries of just before and they pull up all the images, as before, but this has stopped my progress in this project dead in my tracks.
         I can't make any sense of this at all.

    Well now it's not working at all.  I moved the folder to a higher level of my directory tree, with the same result.  then I just tried a subfolder and it quickly found that there were no images, either that didn't have zzz or that ended in .tif.
    Than I tried another family folder and it quickly found no images according to the criteria.  So now the search function just doesn't work.

  • PDF Maker Issue - can't find add-in in adobe folder, doesn't work in MS Office 2010.

    Hi Guys,
    Since last few years I've been using Adobe Acrobat Reader (IX, X, XI) on my Sony Vaio.
    It was integrated with MS Office 2010 and worked perfect with Outlook, Word, and Excel.
    Last week I had serious isues with my notebook and had to do a clean instalation of Windows 7 64-bit.
    I installed all software back (Eset Endpoint Antivirus 5, MS Office 2010 32-bit, etc.) and at the end, yesterday
    I finally installed Adobe Acrobat Reader XI (free). Then I noticed with dissapointment that there is no Adobe ribbon.
    I did everything mentioned here PDFMaker unavailable | Office 2007, Office 2010 | Acrobat 9, Acrobat X, Acrobat XI
    including instalation in a simplified mode, but it doesn't work for me.
    The path mentioned in above link doesn't exist in my computer "C:\Program Files\Adobe\Acrobat [9.0 or 10.0]\PDFMaker\Office".
    I can find only: "C:\Program Files (x86)\Adobe\Reader 11.0\Reader"   - a path to AR app. There is no PDFMaker folder at all.
    And another path: "C:\ProgramData\Adobe\Acrobat\11.0\Replicate" - Replicate is the only folder under "11.0".
    Do You have any idea what I could do to instal PDFMaker module , and use it with MS Office 2010?
    Sorry for my poor English.
    I'll be very gratefull for help.

    If you have all of those Adobe Reader products on your system, you are asking for problems. Adobe states one should not have more than one copy of an application on their system.
    Reader has no plug-in for MS Office of any version.
    Only Acrobat has a plug-in for MS Office. Again Adobe does not approve of more than one copy of Acrobat on a system. And if you dare to have Reader on the same system then Acrobat and Reader should be at the same major version.

  • Possibility to choose displayed perspectives in folder doesn't work

    On the folder level is possible to choose displayed subfolders and perspectives from availables. Only these subfolders and perspectives should be displayed in the folder. Subfolders works OK, perspectives are displayed all without respecting this setting. Portal version is 3.0.9.8.1 on NT.

    Well now it's not working at all.  I moved the folder to a higher level of my directory tree, with the same result.  then I just tried a subfolder and it quickly found that there were no images, either that didn't have zzz or that ended in .tif.
    Than I tried another family folder and it quickly found no images according to the criteria.  So now the search function just doesn't work.

  • Volume in fav folder doesn`t work

    A bug I assume, but "volume" seems to be the only effect in my favorite folder which doesn't work after I restart the program (load it up, etc...). It'll give me a circle with line going through basically showing me invalid. It'll work when I take it from the audio bin, it'll work when I put the effect into my favorite bin and then onto the clip, but not after I start up the program afterwards. I'm running CS6 on W7, anyone else having this issue?
    Mike

    True, I can do that as well, thanks.
    I still feel bothered by the bug though, each way has its pros of working, like copy-pasting the effect.
    Mike

  • FileXtra4 problem - default folder doesn't work.

    Don't know why this doesn't work, but the default folder
    setting in the
    FileXtra open/save dialogues doesn't seem to work as
    advertised. My code
    goes like so:
    currentLevel = fxObj.fx_FileOpenDialog(the moviePath &
    "\Levels\","*.lvl","Load Level",False,True)
    the moviePath & "\Levels\"
    should be the correct folder, but instead, it always defaults
    to My
    Documents for some reason. (When running as a projector. In
    Authoring
    mode, it defaults to the moviePath, but ignores my
    sub-folder.) Either way,
    it never gets it right the first time. The second time and
    subsequent
    times, it always goes to wherever you last opened something,
    but the first
    time is always wrong. I did notice that the example in their
    documentation:
    put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
    Files/*.TXT","Choose a
    text file", True, True)
    does use My Documents as its default, but I've changed that,
    so it should be
    going to the folder I pointed it at.

    Without looking too deeply, I think I remember that, yes, it
    doesn't work.
    I usually end up using BuddyAPI for this.
    Craig
    "Darrel Hoffman" <[email protected]> wrote in message
    news:fm362a$ep7$[email protected]..
    > Don't know why this doesn't work, but the default folder
    setting in the
    > FileXtra open/save dialogues doesn't seem to work as
    advertised. My code
    > goes like so:
    >
    > currentLevel = fxObj.fx_FileOpenDialog(the moviePath
    > "\Levels\","*.lvl","Load Level",False,True)
    >
    > the moviePath & "\Levels\"
    > should be the correct folder, but instead, it always
    defaults to My
    > Documents for some reason. (When running as a projector.
    In Authoring
    > mode, it defaults to the moviePath, but ignores my
    sub-folder.) Either
    > way, it never gets it right the first time. The second
    time and
    > subsequent times, it always goes to wherever you last
    opened something,
    > but the first time is always wrong. I did notice that
    the example in
    > their documentation:
    >
    > put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
    Files/*.TXT","Choose
    > a text file", True, True)
    >
    > does use My Documents as its default, but I've changed
    that, so it should
    > be going to the folder I pointed it at.
    >

  • I have several separators that appeared in my bookmarks list without me adding them. How do I delete them? I already tried right click/cut, right click/delete in the bookmark menu-that doesn't work.

    I have several separators that appeared in my bookmarks list without me adding them. How do I delete them? I already tried right click/cut, right click/delete in the bookmark menu and directly on the list-that doesn't work.

    If you can't delete them in the normal way in the Bookmarks Manager then you may have a problem with the file places.sqlite.
    See http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    See also [[Deleting bookmarks]]

  • HT201320 My iPad doesn't recognize my email account.  When I delete it and reenter it still doesn't work.  What should I do?

    My ipad doesn't recognize my email account.  When I delete the account and reenter it, it still doesn't work.  What should I do?

    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    More Info Here  >  http://www.apple.com/support/ipad/mail/

  • Deleting and Syncing Photos on iPhone doesn't work or is stuck

    I have around 3000 photos on my iPhone (all albums from Apterture synched via iTunes). I intend to delete all of them. It does not work if I choose to uncheck the synch photos feature in iTunes and also if I check it but have no albums/projects selected.
    Instead the last step of the iTunes sync (importing photos) runs forever, even through a whole night. And I still have my photo albums which should not be on the iPhone an more.
    Any idea or help? Thank you.

    Check the settings of the side switch:
    Settings>General. Be sure that the side switch is set to screen lock rather than mute.

  • Using Table.Join formula takes extremly long time to get results.(Why Query Folding doesn't work?)

    Hi,
    I built a query with 4 tables inside (load from Oracle DB and two of them are quite big, more than millions of rows). After filtering, I tried to build relationships between tables using Table.Join formula. However, the process took extremly long time to
    bring out results (I ended the process after 15 mins' processing). There's a status bar kept updating while the query was processing, which is showed as  . I suppose
    this is because the query folding didn't working, so PQ had to load all the data to local memory first then do the opertion, instead of doing all the work on the source system side. Am I right? If yes, is there any ways to solve this issue?
    Thanks.
    Regards,
    Qilong 

    Hi Curt,
    Here's the query that I'm refering,
    let
        Source = Oracle.Database("reporting"),
        AOLOT_HISTS = Source{[Schema="GEN",Item="MVIEW$_AOLOT_HISTS"]}[Data],
        WORK_WEEK = Source{[Schema="GEN",Item="WORK_WEEK"]}[Data],
        DEVICES = Source{[Schema="GEN",Item="MVIEW$_DEVICES"]}[Data],
        AO_LOTS = Source{[Schema="GEN",Item="MVIEW$_AO_LOTS"]}[Data],
        Filter_WorkWeek = Table.SelectRows(WORK_WEEK, each ([WRWK_YEAR] = 2015) and (([WORK_WEEK] = 1) or ([WORK_WEEK] = 2) or ([WORK_WEEK] = 3))), 
        Filter_AlotHists = Table.SelectRows(AOLOT_HISTS, each ([STEP_NAME] = "BAKE" or [STEP_NAME] = "COLD TEST-IFLEX" or [STEP_NAME] = "COLD TEST-MFLEX") and ([OUT_QUANTITY] <> 0)),
        #"Added Custom" = Table.AddColumn(Filter_AlotHists, "Custom", each Table.SelectRows(Filter_WorkWeek, (table2Row) => [PROCESS_END_TIME] >= table2Row[WRWK_START_DATE] and [PROCESS_END_TIME] <= table2Row[WRWK_END_DATE])),
        #"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"WRWK_YEAR", "WORK_WEEK", "WRWK_START_DATE", "WRWK_END_DATE"}, {"WRWK_YEAR", "WORK_WEEK",
    "WRWK_START_DATE", "WRWK_END_DATE"}),
        Filter_AolotHists_byWeek = Table.SelectRows(#"Expand Custom", each ([WORK_WEEK] <> null)),
        SelectColumns_AolotHists = Table.SelectColumns(Filter_AolotHists_byWeek,{"ALOT_NUMBER", "STEP_NAME", "PROCESS_START_TIME", "PROCESS_END_TIME", "START_QUANTITY", "OUT_QUANTITY", "REJECT_QUANTITY",
    "WRWK_FISCAL_YEAR", "WRWK_WORK_WEEK_NO"}),
        Filter_Devices= Table.SelectRows(DEVICES, each ([DEPARTMENT] = "TEST1")),
        SelectColumns_Devices = Table.SelectColumns(Filter_Devices,{"DEVC_NUMBER", "PCKG_CODE"}),
        Filter_AoLots = Table.SelectRows(AO_LOTS, each Text.Contains([DEVC_NUMBER], "MC09XS3400AFK") or Text.Contains([DEVC_NUMBER], "MC09XS3400AFKR2") or Text.Contains([DEVC_NUMBER], "MC10XS3412CHFK") or Text.Contains([DEVC_NUMBER],
    "MC10XS3412CHFKR2")),
        SelectColumns_AoLots = Table.SelectColumns(Filter_AoLots,{"ALOT_NUMBER", "DEVC_NUMBER", "TRACECODE", "WAFERLOTNUMBER"}),
        TableJoin = Table.Join(SelectColumns_AolotHists, "ALOT_NUMBER", Table.PrefixColumns(SelectColumns_AoLots, "AoLots"), "AoLots.ALOT_NUMBER"),
        TableJoin1 = Table.Join(TableJoin, "AoLots.DEVC_NUMBER", Table.PrefixColumns(SelectColumns_Devices, "Devices"), "Devices.DEVC_NUMBER")
    in
        TableJoin1
    Could you please give me some hints why it needs so long to process?
    Thanks.

  • Renaming session restore backup doesn't work, how do I restore old session after a crash?

    Computer crashed and Firefox didn't remember my session. It happened a couple weeks ago so I had looked up how to fix and I learned from my mistake and saved the sessionstore.bak file before restarting Firefox. I closed Firefox, deleted sessionstore.js and renamed .bak to js but on startup it still doesn't bring up the restore session. Restore previous on the history tab still greyed out, about:sessionrestore brings up no tabs. I even tried copying that same file and also naming copies as sessionstore-1 & 2. How do I get it to work?

    You can try to restore a previous version of the sessionstore.js or sessionstore.bak file. You need to rename the .bak file to .js to make Firefox see that session.
    right-click: Properties > Previous Versions
    http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions
    http://kb.mozillazine.org/sessionstore.js
    http://kb.mozillazine.org/Session_Restore
    https://support.mozilla.org/kb/restore-previous-session

  • Delete email in mavericks mac mail doesn't work with google app

    Hello,
    I've got a macbook pro retina. I've received it with mavericks pre-installed, I've done the update to 10.9.1.
    I got a google app account it was use previously with mac mail on mac os X 10.8.
    I've resetup it with the all mail settings imap shown. The "Auto-Expunge on" is set to  "- Immediately update the server. (default)"
    The problems are:
    - each time I delete a message in inbox it re-appear if I click on another folder (like sent) and go back to inbox.
    - if I move a message from inbox to a local folder it doesn't move it, It copy it. Before mavericks that feature was working.
    Could you tell me what are the right settings in google app mail to set to work well with mavericks?
    Thanks a lot, this new mac mail app is hard to work with...

    18 ways to view the ~/Library folder in Lion | Macworld

  • Search files in current folder doesn't work

    When I search my whole mac for e.g. "Danse Macabre" i get the results from all over the place, which is to be expected.
    So when I go into the folder I get a list of files including the one I was searching for. So far so good.
    While typing in a new search inside that current folder, the file list refreshes and still shows me all files in that folder, even though the search string isn' part of most of the names:
    When I actually specify to only look at the actual file names, the list shows only the file including the actual string. Unintuitive but acceptable. Just pressing the enter key will still show the whole unfiltered directory.
    However - and that is my real grip - when I want to find specific files, e.g. all files containing the string "cab" then this happens:
    The list empties the moment I type in the third letter, which doesn't make any more sense than showing all files when typing in the first letter. And when I actually commit the search which should show me all files containing "cab" in the name, I got nothing.
    This makes the search feature in finder completely useless.
    What's going on?
    And how do I fix it?

    I played around with this a little.
    Although typing into the folder search field gives you an option labeled  "Filename contains…", what you really seem to get is a search for "Filename contains a 'word' that begins with…."
    A new "word" in the filename can be the beginning of the filename, anything that comes after a punctuation character, or a case change. The matching criteria itself ignores the case.
    So in your example, you had a file named "01 Danse macabre.mp3", and a filename search for "cab" didn't find it. I think that is because "cab" is in the middle of the string, and is not a "word" as defined above. As an exercise, I renamed one of my own files as "01 Danse macabre.mp3", and as expected, searching for the filename "cab" didn't find it. However if I then capitalized the "C" so that the filename was "01 Danse maCabre.mp3" then a search for "cab" did find it:
    "Cab" starts a new "word" because of the case change. The search itself is case-insensitive, so that searching for "cab" finds "Cab".
    This shows the problem, but doesn't fix it. As a work-around, instead of using the top-right search field to type in "cab", instead hit command-F to bring up the search window.  Change the initial "Kind is Any" line to "Name contains". Now you get a true "contains" search instead of a "word begins with" search. When I searched for "cab" this this way, I did find "01 Danse macabre.mp3":

Maybe you are looking for

  • One to many relationship

    hi, i have two tables first one have two fields like item_no, Item_name and in the second table item_no and weight. for one item_no there are many different weights in the second table so the item_no is repeating in this table. i wanted to create a r

  • Delivery costs with shipment costs

    Dear Sir, I want to capture the delivery costs from shipment cost document. I did all bellow mentioned settings: For freight cost to be transfered as delivery cost, the Purchase order need to have a freight condition with zero value. Also the freight

  • Creation of Download file for TCode AS94

    Hi All, Scenario: We are creating a new company from our old company and for the data migration we planned to download the data from the old company create a batch upload  file for the Transaction AS94 - Create LegacyAsset Subnumber and upload it.For

  • Using JDeveloper  for Apps(GL/AR/AP/OM/INV)

    Hi, I'm in a project to implement Oracle Apps 11i, GL/AR/AP/OM/INV/++ modules. We have a lot of extensions to do (more than 1500 days-man). We use AIM and, accordingly, we suggested the client to use the standard development tools for an Apps impleme

  • Mouse freezing on G5 i-Mac

    Hi, My G5 1.9GHZ, 1GB RAM I-MAC keeps freezing with me being unable to move the cursor with the mouse or do anything with the keyboard either. I tried switching the usb connections about (tried my old mac mmouse too)and also disconnecting my Line 6 U