WebDav Service for /SAP/BW/PUBLIC/ Folder
Hello
How can I create a Webdav service for a specific Folder in SE80 MimeRepository. There is one content Folder for the /SAP/BC/BSP/ but I need a Folder for /SAP/BW/PUBLIC/.
Thank you for your help.
Daniel
Daniel,
It's just a matter of specifying CL_O2_HTTP_WEBDAV in the handler list of that service in SICF.
Eddy
Similar Messages
-
How I can find standard SOA services for SAP HR?
How I can find standard SOA services for SAP HR?
There is a list of services?how about tcode SOAMANAGER ?
Good luck. -
Sup forum
didnt where to post this doubt.
Im in the process of instalation of Content Services for SAP 5.3. SP3.
Im testing archive services for sap 5.3. sp3. (archive services for sap installation guide page 63 "testing connection between sap and archives services")
IF_HTTP_CLIENT -> RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i m searching info about this issue and i didnt find out anything relate to this problem.
If somebody has a clue about it, dont doubt to write it down
THANKS IN ADVANCEJarek,
Did u manage to find an answer for your question? If so please can you share it with me? -
Hi,
We are looking into producting a solution for electronic billing using iDocs.
Someone mentioned that it might be possible to utilise Contyent Services for SAP.
Does anyone know if this can work with iDocs?
e.g. iDocs be passed in some way to this to be transformed into XML.
Regards
DavidHi Christoph,
Thanks for your answer.
The issue is while trying to define a Content Repository in transaction OAC0. -
I get this error - HTTP error: 404 Not Found -
I have the following settings:
Document Area : ArchiveLink
Storage type: HTTP Content Server
Version no. 0045
HTTP server : IP of the Documentum Server
Port Number 9081
HTTP Script: /webtop/drl/objectId/contentserver.dll (This file may not be available - where do I get this from?)
Transfer drctry: /usr/sap/QA1/SYS/global (This directory is on the SAP server - is this correct or should it be on the Content Server?)
Also, EMC says that we have to install the additional software - "Content Services for SAP" - Do we require this for establishing a connection?
Best Regards,
Dinar Karkhanis -
XI for create web servicies for SAP R/3 4.6C
Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP.
Which is your opinion about this architectural scenario? Is it possible to fulfil the requirement of our business users with a more simple architectural solution (for example with WEB DYNPRO)?
Many thanks in advance for your collaboration.
Regards,
BobInfact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI.
TIBCO is another middleware. So once you expose your R/3 functionalities as web service, you may directly use TIBCO to integrate and XI won't be required at all.
Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly.
WebDynpro application would provide you an easy GUI and could act as Soap client as well to send data.
Regards,
Prateek -
Maximum file size for iDisk's public folder?
I was wondering whether there is a max size for files in the idisk's public folder.
When syncing my 68 MB zip file, the file on the iDisk shows 0MB. When uploading files externally via Safari, any file above 1 MB shows as 0MB.
What are the restrictions...cannot find any information in the database.
JurgenHi Jürgen,
Apparently there is no limit to the size. Check out the size of this file I have stored there! (;>)
BTW, I'm trying to find out about this size anomoly in another forum.
Joe -
SAP可以发布web service,并通过该WS访问R3中的一张表,是否有可能用web service发布一个SAP BW中的一个Cube或Query?谢谢
就我所知,你可以用web service
1. upload data 到 BW
http://help.sap.com/saphelp_nw04/helpdata/en/71/421640033ae569e10000000a155106/frameset.htm
2. 通过HTTP services可以
· Display of metadata for BW objects (see Calling the Metadata Repository as an HTTP-Service)
· Exchanging metadata between various systems (see Exchange of Metadata in XMI Format)
· Display of user-defined online documentation for metadata objects (see Structure linkDocument as Online Documentation)
The following services are implemented as Web services:
· Open Analysis Interfaces (see Structure linkXML for Analysis)
· Structure linkWeb Service for Access to Query Data
3. 通过Web Service可以access Query Data
http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/frameset.htm
最后是不是可以通过Web Service发布一个SAP BW中的一个Cube,这个我没有遇到过,也没找到相关文档,估计直接得话多半是不可以。但间接的比如通过open hub Service,或是XI应该也是可以的。
希望能有帮助。 -
Exchange 2013 delivery reports for mail enabled public folder
How can I get delivery reports for mail enabled public folders? Would I search the related public folder mailbox?
Hi,
When you track messages using Delivery Reports, you can only choose user mailbox when you select mailbox to search. Under the option "Mailbox to search", there is no mail-enabled public folder listed there for you to select from
the address book.
But you can search messages sent to or received from mail-enabled public folder.
Track messages with delivery reports
http://technet.microsoft.com/en-GB/library/jj150554(v=exchg.150).aspx
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support -
Cloud services for SAP Utilities
Hi,
Interested to know where can i find the knowledge and documents related to cloud services offered for Utility industry by SAPHi Vijay,
Now we have Currently the only place to get these type of materials is Service market place(service.sap.com and Business Center).
if you have authorization you may get the detailed material of Cloud services and SAP Business By Design .
i hope the above information may help you.
Thanks&Regards
Sreenivas Pachva -
Creating a WEB Service for SAP enterprise connector
Hi,
I am using the SAP enterprise connector plugin for Netweaver 04.
It generated me all the classes that I need for the BAPI.
It also generated me a Proxy class.
I want to create a service.
This is what I've done :
1) create a portal service.
2) create a methode in the service :
public Bapi_Companycode_Getdetail_Output execute_BAPI_COMPANYCODE_GETDETAIL(
Bapi_Companycode_Getdetail_Input arg1)
try {
return new MyProxy_PortType().bapi_Companycode_Getdetail (arg1);
} catch (Exception e) {
return null;
3) after I created a web service from the portal service.
Is it the right way ?
Thanks a lot.Hi Marcin and everyone,
Thanks for the precious explanations.
I created a client and I have an exception.
1) I made a portal service from wsdl - client side.
2) I created a DynPage.
3) Here is the code :
IMyBAPI4Service client = (IMyBAPI4Service) PortalRuntime.getRuntimeResources().getService(
IMyBAPI4Service.KEY);
IMyBAPI4Service securedClient = (IMyBAPI4Service) client.getSecurisedServiceConnection( request.getUser());
//this is null.
if (securedClient.getURLEndPoint().getURL() == null) {
securedClient.setURLEndPoint(new URLEndpoint("http://<server>:<port>/irj/servlet/prt/soap/com.sap.portal.prt.soap.MyBAPI4Service?style=doc_lit"));
Bapi_Companycode_Getdetail_Input importParams = new Bapi_Companycode_Getdetail_Input();
importParams.setCompanycodeid("0500");
Bapi_Companycode_Getdetail_Output exportParams = null;
securedClient.execute_BAPI_COMPANYCODE_GETDETAIL(importParams);
Do I have to use a secured client ? What is it ?
The exception is :
Problem at execution: SOAP Fault Error (java.lang.NoClassDefFoundError) : java.lang.NoClassDefFoundError
Thanks Marcin....
Message was edited by: David Fryda -
Web service for SAP R/3 user authentication
Hi Experts,
We are searching for any standard web service/ Bapi to authenicate an SAP user from an external system which needs WSDL to check this . External system will be providing the SAP user ID and password and expects an acknowledgemnt that whether the user is authenticated or not .
Is there any webservice/Bapi available for this purpose? if not how we can achieve this?
Thanks in advance
SanuHi,
I don't think there is any web service to just check authentication but the work around is simple :
Call any web service which just display some information (for example call STFC_CONNECTION function module as a web service).
As you need to authenticate to call the web service, send the user/password.
If you get the release information, the user/password is OK.
If you get HTTP 401 error, the user/password is KO.
Of course the user needs the authorisation to execute the STFC_CONNECTION function module.
Regards,
Olivier -
Adobe Document Services for SAP NetWeaver 7.1
Hi there,
we're planning to install a NetWeaver 7.1 PI system. One of the reqirements is the availability of Adobe Document Services. Does anybody know, if the ADS are already available for NetWeaver 7.1?
Thanks in advance,
MatthiasHello Samrat,
thank you for your quick reply. You really helped me out.
Unfortunately, I haven't marked this thread as a question. So I cannot give you any points. Is there any possibility to change this thread into a question?
Cheers,
Matthias -
Outlook 2011 for MAC vs Public Folder & Read Only
Hi.
We have MAC OS 10.5.8
We use Outlook for MAC 2011. Use Public Forders, open the file XLSX, but it mode "read only".
Users can not edit these files.
Files are shared, so save them from himself locally and copied at the public Folders - does not fit.
How to enable editing?
noticed when opening the file it is placed in the directory:
/Users/username/Library/Caches/TemporaryItems/Outlook Temp
I did chmod 766 for directory.
But files still have rights 644.
I see two solutions:
configure Outlook 2011 to allow edit documents. But I can not find where it is configured...
Or give the right directory that you could edit the files. But I do not know how...
Thank you.by design
-
Can any software provide the printing service for SAP?
I need printers for production tags. It is something like a label for the pack of goods.
I will have to print different tags for different customers as they requested. If better I can find some software which can easily change the layout of printer, with simple GUI, people can just dragging to the correct position.
Please give me some advice.I need a printer for production tags. It is something like a label for the pack of goods.
I will have to print different tags for different customers as they requested. If better I can find some software which can easily change the layout of printer, with simple GUI, people can just dragging to the correct position.
The tags will be hard to modify by SAP scripts.
I need to find a easier solution, so that maybe even the end user can make customized product tag.
Please give some advice. Thank you. -
Mail Enabled Public Folder Issues after migration online
Hi
We have recently migrated our Legacy (Exchange 2010) Public Folder Infrastructure to Exchange Online - we have a hybrid setup, SSO and DirSync.
We initially had an issue where some of our mail enabled public folders had lost their link with the associated MailPublicFolder objects and as such could not receive email.
We resolved this issue ourselves however we are now experiencing a different issue which i believe should be easily resolvable however this isn't the case at the minute.
The issue is that when a user emails a Mail Enabled Public folder Exchange online is attempting to relay the email back to our onPrem servers. This is occuring for the bulk of our Mail Enabled Public Folders - we have ~1200 of these. The only
folders that are working as expected are those that had the initial issue above and for which we had to remove and re mail enable these folders. We also had to recreate any secondary smtp address for these folders. This accounts for 88 of our total
MEPFs.
I have checked the attributes on the MailPublicFolder objects for those that are not working and those that are functioning as expected. The only difference in these that I can see is that the MEPFs with the issue have a value set in the ExternalEmailAddressAttribute.
I have tried to programatically set this value to $Null however i receive the following error:
The external e-mail address $null is not an SMTP e-mail address.
I have also tried the following : set-mailpublicfolder -Identity "MEPF"-ExternalEmailAddress "<not set>"
with the same resultAttempting to use the following syntax -externalemailaddress @{remove=$oldAddress} returns the following error:
Cannot process argument transformation on parameter 'ExternalEmailAddress'.Cannot convert the "System.Collections.Hashtable" value of type"System.Collections.Hashtable" to type "Microsoft.Exchange.Data.ProxyAddress".
At present the only fix that I have for this is to take a copy of the email addresses for an affected public folder, Mail disable it, wait for the object to be cleared, re-enable the public folder as a mail public folder and then re-add the email addresses.
This is ok on an adhoc basis but not for the ~1200 folders that are affected. Especially when from what i can see it should be relatively straightforward to resolve this with a simple PowerShell script.
I do have a case open with MS for this but I am hoping that somebody here can help also.
Thanks
JoeOk so i fixed it myself.
The thinking here is that the ExternalEmailAddress was set using the Primary SMTP address while the Public Folders were on premises.
In order to get the required information we ran a script to export all the MailPublicFolder objects which had a value in the ExternalEmailAddress attribute. We exported the Name, ExternalEmailAddress and GUID
We then ran a second script to export the Identity, MailRecipientGuid from Get-PublicFolder -recurse.
The MailRecipientGUID is what ties the Mail Enabled Public folder to the MailPublicFolder object.
Using Excel I then matched the two up and created a csv file with the Identity Attribute from the get-PublicFolder command and the ExternalEmailAddress Attribute from Get-MailPublicFolder.
The following script then used this csv file to first Mail Disable the Public Folder, then Mail Enable the Public Folder.
Once these steps have been completed the final stage is to add the SMTP address back in to the Public folder.
To do this it is necessary to retrieve the new MailRecipientGUID and use it to return the MailPublicFolder for the Set-MailPublicFolder command.
I was happy to use this script after i tested with a small subset of the data. It is provided as is with no guarantee that it will be suitable for you to use and any use of this script is at your own risk.
Script to Automatically fix brokenn Public Folder Objects
Created By: Joe McGrath
Created On: 18/02/2014
$Path = "C:\PublicFolders.csv"
import-csv -Path $Path | ForEach-Object `
Disable-MailPublicFolder -identity $_.Identity -Confirm:$False
Write-Host "Broken Public Folders Now Mail Disabled"
Write-Host "Waiting for commands to be fully processed online - the script will continue in 5 minutes"
Start-Sleep 300
Write-Host "Re MailEnabling Public Folders"
import-csv -Path $Path | ForEach-Object `
Enable-MailPublicFolder -identity $_.Identity
Write-host "Broken Public Folders now enabled"
Write-Host "Now waiting to allow online service to catch up - script will continute in 5 minutes"
Start-Sleep 300
Write-Host "Updating email addresses for broken public folders"
import-csv -Path $Path | ForEach-Object `
$NewPF = get-publicfolder -identity $_.Identity
Write-Host $NewPF.Identity
Write-host $newPF.MailRecipientGuid
$EmailAddresses = $_.AdditionalEMailAddresses
$NewMailPF = get-MailPublicFolder -resultsize unlimited | Where-Object {$_.Guid -eq $NewPF.MailRecipientGuid}
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddresses $EmailAddresses -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$TRUE
$EmailAddresses = ""
Write-Host "Completed!"
Maybe you are looking for
-
Can't access "Network" and other performance issues
Hi all, I'm facing a catch-22 and am not sure what to do to get myself and my mac out of this downward spiral. Any help you can offer would be greatly appreciated (fyi I am admittedly not great with macs and probably don't maintain my MacBook Pro wel
-
Auto-kick off MaxL script after Oracle GL data load?
Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL. My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing Max
-
Upgrading from 4.2 to 4.3 in Lightroom
I get the message : the file does not have a program associated with it for performing this action. Create an association in the default programs control panel I went to default programs control panel an did not see where you change anything ? And
-
Dear All, 1.How can i check the user exits/enhancement implemented in system. 2. Need list of all user exits in sap PM. Thanks Sushant
-
Horizontal target line on chart
Hi, I want to add horizontal line on my chart that will act as target line. For example Static Target sales : 10,000 Dynamic Values from database Jan : 9000 Feb : 11500 Mar : 5000 Can someone please tell me how to add static target line on chart. Tha