WebDynpro editor issue: Clicking on UI element does not open up defn in UI tree

Hello,
We are facing a strange issue with webdynpro editor on one of our SAP Landscape. In change mode when i double click on an UI element in webdynpro layout editor( SE80) the corresponding UI element definition does not open up in the left hand side ROOTUIELEMENTCONTAINER tree. This functionality works in our ERP system which is on a lower service pack.
I recently discussed this problem with an onsite trainer ( from SAP ) who suggested this feature was taken away in NW Ehp 7.3 onwards to avoid some javascript error in the webdypro layout editor. Can someone confirm this? I have already tried searching servicemarketplace without success. If this feature has been removed i dont want to waste time creating OSS note.
Regards.
Vivek.
System details SAP PPM system :
SAP_BASIS
731
0006
SAPKB73106
SAP Basis Component
SAP_ABA
731
0006
SAPKA73106
Cross-Application Component
CPRXRPM
500_702
0009
SAPK-50009INCPRXRPM
SAP Portfolio and Project Management 5.0 (ABAP)
Attached is a screenshot of the editor( just for clarity).

Vivek,
We're experiencing the same behaviour since a couple of weeks. Did you already create a message to SAP ? If so I'll wait for you to post the feedback from SAP in answer to this message. If not I'll create one because it becomes hard finding your way in the navigation tree for large views...
Kind Regards,
Igor.

Similar Messages

Photoshop elements does not open, says "gathering user info...."

photoshop elements does not open, says "gathering user info...."

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Clicking the scroll wheel does not open a new firefox window

I'm running Windows 7 x64 SP1. I use the scroll wheel to click items in the task bar to open another instance of those items. Eg I scroll-click a Firefox or Excel or Explorer or whatever item in the taskbar, and it opens another instance of that program. I use this feature to open a new instance of FireFox rather than switching to the FF window, then using control-n to open a new window.
I just upgraded to FireFox 6 from FF4.x. Since doing so, scroll-clicking the FF item in the taskbar does not open a new FF window. It does, well, nothing.
I installed FF6 on a clean Win7 x86 (RTM) build in a VM. When I use the scroll-click feature in the taskbar, it works as expected: it opens a new FF window.
Things I have tried: A different mouse; updating video drivers (I doubted this would make a difference, but it needed to be done anyway, so I thought I'd mention it); running FF in safe mode (ie with all plugins etc disabled).
I'm doing a little experimentation right now with respect to x86/x64, RTM/SP1, clean FF6/upgrade from 4.x and other differences that might highlight why it works as expected in my VM but not on my physical machine.
I'm curious to know if anyone else has experienced this problem since upgrading to FF6.
Max

Respectfully, that answer isn't particularly helpful. I have already demonstrated that middle-clicking (mouse wheel click) will open a new instance of FF, and other programs. This was true before the upgrade from FF4 to FF6, and is true on all my VM builds (Windows 7 default install with nothing but FF installed).
Nevertheless, I've tried shift-left-click, and it does not open a new instance. It will only open a new instance if I pin FF to the taskbar, which I have already stated I do not want to do. This new behaviour is unique to FF. Other applications (Word, Excel, Internet Explorer, whatever) all behave as expected. It is only Firefox that is misbehaving, and it is only misbehaving since the upgrade.
My issue is that FF has changed its behaviour with respect to middle-clicking since upgrading from 4 to 6. I'd welcome helpful comments about getting FF to behave.
Max

Left click on a link does not open the link; a small blue window opens saying loading then closes.

Left click on any link in a web page does not open the link. A very small blue window appears with the word loading and a few moving dots. In a few seconds the blue window closes but the link does not open. Links used to open. If I right click the link, I can open the link in a new window. Many new windows pile up. This is a nuisance.
I am using Firefox 3.6.8 for Canonical 1.0 in Ubuntu 9.10.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

My mac book air 2013 when i click on things it does not open but only pics and files i tried a mouse the track pad does not have a problem

My laptop is fine all working but the track pad and mouse work fine but when i click on a file or a pic it does not open and i end up have ing to do a ctrl click and selcting open this is so anyoying plz help!!!

You say click on a file but your do mean you are double clicking to open the file, right?

Double Click ...folder does not open, any suggestions please

Hello,
A new problem surfaced today on Macbook Pro (Leopard) after I allowed the system software updater to run. Of course this could be pure coincidence as I did not notice the problem until working for half a day.
When I double click on a folder on the desktop it does not open.
So I Ctrl-click the folder and select "open." No problem, the folder opens.
Now when I double click on a folder within this folder it opens just fine. So the problem is confined to the desktop.
I log out and back in and the problem goes away, but comes back after I have been working for a while.
I disabled Spaces but it did not help.
Any suggestions would be most welcome.
Thanks.

I would say that this topic IS solved, unless the original poster was unable to use the solution (change the trackpad settings) successfully. I, for one, was able to, and boy am I grateful! This has happened across machines and operating systems for me, for years now, and finally I have a solution! Thank you for the helpful post(s) that helped me get my mac back on track!

Adobe Premiere Elements does not open after installation

Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
Inge

Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge

I have firfox installed on computer but when i double click on it it does not open or does not load

i had issue with windows so i hit restore to put computer back to earlier point to fix problem i tried to open firefox and it would not load or open up

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Double clicking Illustrator (.ai) file does not open a file with opened app.

Hello,
I have an Illustrator CS5 (15.0.2) running on Windows 7 Pro. Here are the symptoms: when double clicking the Illustrator file once the application is already open, the file will not open. You will see an hourglass for a few seconds, but no file contents are displayed. However, if I were to close Illustrator application and then double click on the file, Illustrator will open the file correctly. Additionally, if I go to File -- Open and manually select the file, it also opens the file correctly. Only double clicking the file once the Illustrator application is already open does not work.
Has anyone seen this issue and knows how-to fix it?

Right click on a .ai file and choose properties, check to see what application is set to open .ai files. Try running in 32 bit mode.

Mac Mail (Lion) clicking on reply arrow does not open up the reply

In OSX 10.5 in mail, after I have repolied to an email, an arrow appears to the left of the email. When I click on the arrow, it opens up the replied-email. a great feature. Now I have OSX 10.6 (Lion) and the feature does not work. nothing in the preferences points to that feature. Any help would be appreciated.
Thanks

Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

Normal double clicking or apple O, does not open certain mp3's

I have a few mp3's that no matter what route I go, i.e. drag and drop, manual import through file menu, or double clicking on iTunes mp3's, does not seem to open certain mp3 files. It seems to be random as I can click ten and only one will not open in iTunes. They files don't however look any different or seem to have any major differences.
I can play the files that don't open however in preview, quicktime or logic, so why can I not import and play in iTunes? Any insight here?

Use this >http://triq.net/mac/mp3-validator-mac-os-x

Double-clicking on rpt file does not open report

Post Author: lindad
CA Forum: General
When I double-click on a *.rpt file, Crystal Reports opens but does not bring up the report file. I have to then go to File/Open in order to open the file. I don't receive an error. Does anyone know how to get Crystal Reports to open the file at the same time as executing the crw32.exe?
I checked in Windows Explorer under Tools/Folder Options/File Types, selected RPT which is associated to Crystal Reports, went to the Advanced options, and all I have is Open for an Action. I have the following settings for Open:
Application Used to Perform Action: "C:\Program Files\Crystal Decisions\Crystal Reports 10\crw32.exe" "%1" /dde /e /n
DDE Message: [FileOpen("%1")]
Application: crw32

Post Author: lacsapper
CA Forum: General
I had to go into the Advanced settings and delete the "Open" action, then click "OK" to exit. Then go back in and re-add the Open action, browse to your crw32.exe file as the application to open. Seems to correct the problem; not sure of the cause.
TTFN

When I click on Firefox it does not open nor run

When I click on Firefox the little circle swirling shows up as if it is going to open but then the circle goes away and Firefox does not start. There are no messages shown for why this is happening. I have also right clicked on Firefox and then clicked on Open and the same thing happens. After several attempts to run Firefox I tried downloading Firefox but the process did not complete.

https://support.mozilla.com/en-US/kb/Firefox%20hangs <br />See '''hang-at-exit'''

WebDynpro editor issue: Clicking on UI element does not open up defn in UI tree

Similar Messages

Maybe you are looking for